Error 2349 and 2350 installing PSE v10 on Win 7 machine ?

Please can anyone help, I have tried numerous attempts, followed pre-installations steps but with the same result of a failed install.
Thanks
James

James0073 it looks like you either have a problem with your download or the Microsoft Windows Installer component of your operating system.  Please re-download the software again.  If the problem continues then I would advise you to complete solution 6 in Error 1311, 1335, or 2350 "Source file not found...data1.cab" when installing Adobe products | Windows.

Similar Messages

  • Errors 1335 and 2350

    I seem to have a similar problem installing the latest version of Adobe Reader 9.3 as others have had in the past with other Adobe products, but I'm not sure I understand either the cause or solution.  I previously had Adobe Reader 7 on my laptop and, having successfully downloaded version 9.3 from the web site along with the DLM, the installation stopped at c. 98% and recorded 'Error 1335, The cabinet file Data 1.cab required for installation is corrupt. Could indicate Network Error, error reading from CD ROM or problem with package.'  Choosing the 'Ignore' option brought up 'Error 2350 FDI server error'.  I have consequently lost Adobe Reader 7 and cannot install 9.3.  I have cleared the downloaded files and tried again from scratch with the same result.  I am running Windows XP with all the latest updates.  Can anyone explain the nature of the Error messages and how I can overcome them please?  Be gentle with the techno-babble as I am a relative IT novice and trying to do these things on my own without the help of an IT department or intelligent kids! Thanks. Jinjajohn.

    I am experiencing EXACTLY the same problem as the original poster on this chain with the full Adobe Acrobat 9.3.3
    "recorded 'Error 1335, The cabinet file Data 1.cab required for installation is corrupt. Could indicate Network Error, error reading from CD ROM or problem with package.'  Choosing the 'Ignore' option brought up 'Error 2350 FDI server error'.  I have consequently lost Adobe Acrobat 7 and cannot install 9.3."
    The same error happened from my installation disk and from the product trial version download.  I was on with Adobe Technical Support for 2.5 hours yesterday and he failed to resolve the situation and I broke off the support call, simply angered and frustrated.
    I am attempting to install under Windows 7, and this is the only program I have attempted to install that has had even a blip.
    I might note in addition that due to the recurrent "License Recovery" issue, my prior install of Acrobat 9 refuses to work almost daily, and I simply run the License Recovery fix every morning.
    Adobe software delivers great functionality when it works, but I have to say I am really sick and tired of the time I waste trying to get these products to work and install at a basic level!
    Is there a workable download equivalent to the Reader solution you provided for the full Adobe Acrobat 9.3.3?  Or an upgraded file that would accept my product key
    Many thanks --- I am at my wits end and ready to give up Acrobat permanently if I can't resolve this.

  • Adobe AIR Error - Uninstalling and Re-installing does not work?

    I keep getting this error everytime I turn n my laptop.  I have uninstalled and re-installed Adobe AIR several times and still keep getting this error after it tells me it has been installed successfully.  "This installation of this application is damage.  Try re-installing or contacting the publisher for assistance."  What is wrong with this program?  I cannot keep uninstalling and re-installing  this program and it is not installing properly.

    Pat has a great point and asks a good question.  In addition to identifying the AIR application that is causing you problems you may also want to review Troubleshoot AIR installation | Windows - http://helpx.adobe.com/air/kb/troubleshoot-air-installation-windows.html.

  • How can I fix firefox, my problem does not match those in descriptions because I get no error messages and re-installing does not help!

    Firefox will not start, no error messages at all unless I go to uninstall it and it says that it is already running. After rebooting my computer, and re-installing several times I still get nothing! Been going on for a month or so now. I am running XP pro. PLEASE HELP! I love firefox! The thought of using chrome, safari, IE, or opera is depressing! Please help! Thank you, I have used Firefox since late 2004, it is by far my favorite for many reasons. Any help would be greatly appreciated!
    Sincerely eli anderson.

    Contact iTunes customer support.

  • How do I uninstall and then install PSE 9 w/o losing one license?

    I'm still unable to open the PSE 9 Organizer. Message: "Elements 9 Organizer has stopped working." My only alternative is to uninstall PSE 9 and re-install and hopefully that will solve the problem. But how do I do that and not "lose" one of the 2 licenses that comes with PSE 9?

    OK, I uninstalled PSE 9 and reinstalled. I'm still unable to open the Organizer. I still receive the message: "Elements 9 Organizer has stopped working."
    My next question is probably going to be: How do I send PSE/PPE 9 back and receive a refund. This is just crazy and very frustrating.

  • Re-installing PSE 10 on Win 7 pro 64

    I'm having a issue involving re-installing PSE/PE10 onto my new Win 7 pro 64 home build.
    It started with-
    I had an issue right in the middle of installing software onto this new machine.
    I have multiple Hard Drives installed and during a recovery from being hit with some bugs (malware/virus) during all this installation I thought it best to unplug some of those drives to minimize potential damage.
    I had already installed PSE/PE 10 onto those drives and when I finally got back up and running the links to these installed programs no longer worked. Trying to re-define the links proved too much and so I thought a complete re-install of both programs should do it.
    I un-installed both programs
    Un-install, cleaned registry, found more folders (reading forums here) deleted those, cleaned registry, rebooted thru several of these processes,..and did manage to re-install PE 10, but PSE 10 is giving me fits and I can't figure out what else to do.
    I go to re-install PSE 10 and the only choice I get is to REMOVE the s/w from the pc (even tho it's already uninstalled). Okay, I'll do that and THEN proceed but- after offering to deactivate my software on this pc (okay I can do that) the only option it then gives me is to delete, fine, but when I select that option it then takes me to a window that informs me that the disk doesn't have the room available and even tho other disks are avail to click on, doing so doesn't allow any other selections to be made. The TARGET area (even tho it is for uninstall) is the install disk drive and I can't make another selection. So it ultimately does nothing!
    I managed to get PE 10 back onto the drive, what in the world remnants are staying behind to give Win 7 the impression that I still have the program installed and not allowing me to do just that- re-install it??
    Could really use some assistance on doing this before I wipe the whole HD as a last resort- ugh!
    ps- uninstalled Air, Organizer and any/all folders I could find related to anything Adobe thinking it was interferring with this

    I managed to RegEdit those areas but must have gotten heavy heanded in that, after cleaning all instances of Adobe out of the Registry I get another problem. I just went to try and install PSE 10 after doing as much cleaning as I know how;
    checking the registry as you suggested
    running a registry tool to check for  missing links etc
    rebooting after each pass to clean the drive
    When I went to install it tells me an error on the windows installer- "The configuration data for this product is corrupt. Contact your suppport"
    I must have taken too much out of the Registry. Is there a method to restore? Would that fix the issue?
    Thanks for the assistance
    ps- FYI, upon trying to run the PE10 installer it seems as if that was going to work. I cancelled out of it until I fix the PSE 10 issue. But it did get further than the PSE installer and no error messages.

  • New computer need to re-install PSE-12 on win 8

    I have a new all-in-one and need to re-install PSE 12 how do I download I did not see a download button to do this .
    I have the product key anyone know how to do it ?

    Hi,
    Download the trial version and supply your serial number during installation to make it a full version.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
    Good luck
    Brian

  • Will CS2 and CS3 install on a Windows 8 machine?

    I use a combination of CS2 and CS3 software and will need to get a new machine soon. I see below that someone got DW MX2004 to install on a Windows 7 machine. Is it possible that CS2 and CS3 will install on a Windows 8 machine?

    Hi Paevo,
    Try installing in the compatibility mode.
    Thanks,
    Preran

  • How to get past Error 2203 when re-installing PSE 10? [was: To whom it may concern]

    I have recently purchased a new computer and am trying to reload my copy of Photoshop Elements 10.
    Having started installation, I reached a certain point and received an error message: 2203 telling me I could not proceed as another process was locked the file options? I have no idea what this means but I could progress no further.
    Subsequently I have tried to reload both iTunes and Google Earth and am blocked as it tells me that another programme is trying to install. I assume the Photoshop.
    I have tried to uninstall but am told that it is not installed and have tried, again to install but am told that I must first uninstall the previous programme. The perfect circle.
    I now want this removed.
    I understand that you can download something to remove the blockage to start the installation again, from the start.
    Can you send me the details of how I can organise for you to carry this out? I can find no telphone number to call and am finding the situation extremely vexing.
    With thanks,
    Yours faithfully,
    Chris Druitt

    Hi, david,
    Thank you for your comment, I thought OS X server should do this by default, but it seems it doesn't for some reasons.
    Our firm likes to use two domains, let's say aaa.com and bbb.net and we have been using e-mail services on aaa.com through an ISP and like to set our OS X server as a mail server for bbb.net.
    So far, we found when aaa.com account send an e-mail to wrong [email protected], then aaa.com user receives an error message as we expected, that means OS X server works good enough for this part.
    On the other hand, when bbb.net account send an e-mail to wrong user@wrong domain, then the user can receive error message as expected.
    A problem is that when bbb.net user send an e-mail to wrong user@real domain (we tried sending to wrong [email protected]) , only once the user received the error message as expected, but not every time... this client was Eudora 6.0 on OS 9 and other clients both Eudora and Mail, both POP and IMAP account on OS X have never received any error messages...
    It seems a problem of getting mails from mailbox, so I tried to find any hints on the logs, but I cannot... Do you have any hints for me?

  • SAP Crystal Reports 2011: Error INS00140 and other install errors

    Hi all,
    There have been many customers who have downloaded the Crystal Reports 2011 installation package and have run into an error when the installer attempts to recognize the keycode being used.  The error received is "The Product Keycode is not valid INS00140."
    This thread is meant to track all current resolutions that have been determined based on troubleshooting with customers thus far. In addition, the thread will provide you with the list of things that we need to know in order to properly troubleshoot the issue.
    Before attempting any of the steps below, please be sure that you are using the latest version of Crystal Reports 2011 which is SP02. You can download this version from the SAP [website|http://www.sap.com/solutions/sap-crystal-solutions/query-reporting-analysis/sapcrystalreports/index.epx].
    Coy
    ====================
    Resolution Options
    Windows XP & Microsoft Visual C++ Redistributable
    If you are installing Crystal Reports 2011 on Windows XP, then you need to ensure that the following Microsoft patches are not installed on the machine. You can check this by using the Add / Remove Programs dialogue.
    KB2467175
    KB2467174
    KB2467173
    If any of these are installed, then please remove them before attempting to install Crystal Reports 2011.
    Installing with Dashboard Design 2011 or Presentation Design 2011
    If you are installing Crystal Reports 2011 on the same machine as Dashboard Design 2011 or Presentation Design 2011, then there may be a problem with the registry key that points to the location of the keydecoder DLL. To check this, launch run regedit and navigate to the following location:
    HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Shared Tools\keydecoder.dll
    You want to make sure that the "path" key is pointing to the valid path for the keydecoder.dll. The correct path to the DLL should be: C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\win32_x8keydecoder.dll.
    Uppercase License Key
    In addition to the above, you need to make sure that you are entering the license key in all uppercase characters. There is a current issue with the installer where it does not accept lower case characters.
    Fix - Coming in SP02, but can implement manually for now
    Locate the BCM-4-0.dll.2.Config file in the <install package directory>\dunit\product.crystalreports-4.0-core-32\actions
    (replace crystalreports with crystalreportsjava for CR for Ent and xcelsius for dashboards)
    Open BCM-4-0.dll.2.Config
    Locate this line:
    <bindingRedirect oldVersion="8.0.50727.0-8.0.50727.1434" newVersion="8.0.50727.4053" />
    Modify the oldVersion number to make the line like this one:
    <bindingRedirect oldVersion="8.0.50727.0-8.0.50727.4053" newVersion="8.0.50727.4053" />
    This should allow you to install without issue.
    Further Troubleshooting
    If none of the above helps to resolve the issue, then we need the following:
    The installation logs from the following folder: C:\Documents and Settings\<YOUR USER NAME>\Local Settings\Temp\<DATE OF YOUR LAST ATTEMPTED INSTALLATION>
    The results from attempting to run the keycode validator directly. You can find it under the folders that contain the installation package. For example, C:\Documents and Settings\<YOUR USER NAME>\My Documents\CrystalReports2011\DATA_UNITS\CrystalReports\dunit\product.crystalreports-4.0-core 32\actions\isKeyCodeValid.exe -keycode <YOUR KEYCODE> -version 140 -property CR.EnableCR
    You should submit a new forum post with relevant details about the error and provide links to download the logs generated by following the above steps.
    Edited by: Don Williams on Dec 22, 2011 7:53 AM

    Then try these:
    1. Download the latest version of the installation package for Crystal Reports 2011. To verify the version of extracted package, open productid.txt file located at: {installation package}\DATA_UNITS\CrystalReports\.
    Make sure it is not less than 14.0.2...
    2. Where to download Crystal Reports 2011 installation from: - free trial from SAP Online shop http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx - from SDN Community page http://service.sap.com/sap/bc/bsp/spn/bobj_download/main.htm - from Service Market Place http://service.sap.com/sbop-downloads Note: downloads from all above listed locations are fully functional product installations. Trial version defined by expiring key code, not by functionality limitations.
    3. Copy the installation package to a hard drive if possible to avoid any networking issues.
    4. Login to the machine as Local ADMINISTRATOR.
    5. Temporary disable any kind of firewall, antivirus, network security etc., if possible.
    6. On the latest versions of Windows, even if logged in as local Administrator, right-click the setup.exe and select "Run as Administrator". If do not have Administrator account, right click "Run as" Select current user and uncheck the "Protect my computer and data from unauthorized program activity".
    7. Make sure there is enough space on the computer. If not sure about the space, run "Custom" installation with minimum components. Non-mandatory components could be added at any time.
    8. Finally, if there is an existing "InstallData" folder under C:\Program Files (x86)\SAP BusinessObjects rename it to "InstallDataOLD"
    Edited by: Don Williams on Dec 22, 2011 7:51 AM

  • Error 103 when re-installing PSE 2.0 on Windows 7

    I uninstalled photoshop elements 2.0. When reinstalling photoshop elements 2.0 I get this error message 'Component move data had the following error'
    Media name: DATA
    Component uninstall: DLL
    Error number - 103
    Also error occurred during move data process - 623
    What do I do to reinstall photoshop elements 2.0?  I am using Windows 7

    if that's really pse 2, it may be incompatible with your os.  you could try installing using compatibility mode but i don't know if there's an os old enough offered.
    win xp might work, but that would be pre-sp 3 release.

  • Error 1910 and problems installing/uninstalling itunes

    So i have been up at school trying to use my itunes to add more songs to my ipod on my new laptop. i installed itunes the first time around when i first got my laptop and one day it just stopped working. I have tried to remove the program entirely from my computer but when i try to do that it says "error 1910 could not find shortcut Itunes.ink" please verify file exists and try again. then after that message i get another saying error code 2330 there may be a problem with this package. i dont know what to do and i just want to get rid of it so i can start from scratch. please help.

    You can get this error when there is damage to the filing system. Try running a disk check to see if it finds any errors.
    Checking for disk errors:
    http://windowshelp.microsoft.com/Windows/en-us/help/bc1393cf-9f9c-79c7-0f91-9337 c2c41f811033.mspx

  • Install error 1722 and Custom Install fails too

    I'm installing Java 1.5 (the 16MB offline) and/or the 235K online, problem is the same either way. I am installing on NT4.0 server sp6a.
    When I choose Custom install, and go to the next screen. The Change
    button is disabled. So I cannot change the install directory.
    It seems like an InstallShield version problem. Like there's some new
    dlls or exes of InstallShield that I need.
    Otherwise, it's just Error 1722 again.
    Any ideas appreciated.
    Thanks, John

    Check the last paragraph:
    http://java.sun.com/j2se/1.5.0/install-windows.html

  • I purchased and have installed PSE 12, PSE Premier 12, PSE 13 and PSE Premier 13.  I only need PSE P 13, right?

    May I delete the other three or must I keep PSE 13 to utilize PSE Premier 13?

    May I delete the other three or must I keep PSE 13 to utilize PSE Premier 13?

  • Error RW:50004 during install of R12 on win 2003

    Hello,
    I'm trying to install EBS R12 Express install with Vision DB via edelivery.
    Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
    After about 20% of the installation [about 1hr 30mins into it], I get the following error:
    RW-50004: Error code received when running external process. See log file for details.
    Running Database install driver for VIS instance.
    I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
    The relevant portion from the log file is:
    <snip>
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
    "Statusstring Configuring Database"
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
    Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
    | 0% completed
    <deleted many similar lines here....>
    - 0% completed
    \ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
    Control file creation failed
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
    C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
    "Cannot execute configure of database using RapidClone"
    RW-50010: Error: - script has returned an error: 1
    RW-50004: Error code received when running external process. Check log file for details.
    Running Database Install Driver for VIS instance
    Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
    Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
    instantiate file:
    source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
    dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
    backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
    instantiate file:
    source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
    dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
    backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
    Step 0 of 5
    Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
    Processing Step 1 of 5
    Step 1 of 5
    Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
    Processing Step 2 of 5
    Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
    J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
    J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
    </snip>
    Any help on this would be appreciated.
    Thanks.
    Hammad.
    Message was edited by:
    user592768

    Hussein,
    I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
    I thought I'd try install again before re-installing the OS. Here are the results:
    I got the same error code again on the RapidInstall applet: RW-50004.
    Looks like some sort of service isn't getting started or created.
    However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
    <snip>
    LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
    The command completed successfully
    ECHO is off.
    Listener VIS has already been started.
    ECHO is off.
    addlnctl.cmd exiting with status 0
    OpenService failed
    adsvdlsn.cmd exiting with status 1007
    ERRORCODE = 1007 ERRORCODE_END
    .end std out.
    .end err out.
    </snip>
    and further....
    <snip>
    [CVM Error Report]
    The following report lists errors encountered during CVM Phase
    <filename> <return code where appropriate>
    J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
    No of scripts failed in CVM phase: 1
    [AutoConfig Error Report]
    The following report lists errors AutoConfig encountered during each
    phase of its execution. Errors are grouped by directory and phase.
    The report format is:
    <filename> <phase> <return code where appropriate>
    [SETUP PHASE]
    AutoConfig could not successfully execute the following scripts:
    Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
    adsvdlsn.cmd INSTE8_SETUP 1007
    AutoConfig is exiting with status 1
    RC-50014: Fatal: Execution of AutoConfig was failed
    Raised by oracle.apps.ad.clone.ApplyDBTechStack
    </snip>
    I also checked the NetServiceHandler.log file in the same dir and here is the trace:
    <snip>
    ADX Database Utility
    getConnectionUsingAppsJDBCConnector() -->
    APPS_JDBC_URL='null'
    Trying to get connection using SID based connect descriptor
    getConnection() -->
    sDbHost : ora-apps
    sDbDomain : spectrum-tech.com
    sDbPort : 1531
    sDbSid : VIS
    sDbUser : APPS
    Trying to connect using SID...
    getConnectionUsingSID() -->
    JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12518, TNS:listener could not hand off client connection
    The Connection descriptor used by the client was:
    ora-apps.spectrum-tech.com:1531:VIS
    Trying to connect using SID as ServiceName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12518, TNS:listener could not hand off client connection
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
    Trying to connect using SID as ServiceName.DomainName
    getConnectionUsingServiceName() -->
    JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
    Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
    ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
    The Connection descriptor used by the client was:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
    Connection could not be obtained; returning null
    </snip>
    At the end it says:
    <snip>
    adgentns.pl exiting with status 25600
    ERRORCODE = 25600 ERRORCODE_END
    </snip>
    I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
    Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
    However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
    Thanks.
    Hammad.

Maybe you are looking for