Error 6 on RSS_PROGRAM_GENERATE on extraction.

Hi,
when I run a transported extractor on transaction RSA3, it throws
ERROR 6 on function module RSS_PROGRAM_GENERATE
Any clue of how can i resolve it.
thanks

I don't know what it means, it says something about the function but nothing about extractors.

Similar Messages

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

Error 8 when starting the extraction program

HI all
I have the following problem when i start an extraction. "Error 8 when starting the extraction program" I test the Extraction program on the R/3 system(source system) and it works, It displays records. On the target system in the infpk under step-by-step it gives you the error and It does not give a oss number, it only suggest that you need to look for a OSS. We have BW 3.5 installed with ECC 5.0.
Also on the source system Tcode WE02, for the load period id displays the IDOC with a red light with the same error. It displays the partnet, basic type and the port, the Error is marked next to inbound(inbox).
Regards
alex

Alex,
Check the following OSS notes
947690
511475
23538
Even though the note 947690 is for process chain the steps mentioned in this note could cause Error 8 when scheduling a package for extraction. I think in your case the server name or the host name is incorrect. Check the host and the server name in TCODE SM51 and ask basis to look for the same in RFC entries using SM59 as well.
Abdul

Error 8 when starting the extraction program (BI7.x)

I am receiving the following message when loading from the ODS to the data targets:
Error 8 when starting the extraction program
Message no. R3019
Diagnosis
Error 8 occurred when starting the data extraction program.
System response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or create a problem message of your own.
I have searched the forums and OSS, and can't find anything that matches my situation exactly. I was originally getting an error message that the infosource (80FIA_DS11) didn't exist in the source system. I restored the BIP client and all transfer structures were reactivated. Now when I try to load, I get this error 8. Has anyone experienced this issue?
Thanks,
Pam

Josko,
I am also using BI 7.x and had the problem loading from DSO to Infocube. What are the entries in table ROIDCPRMS? What is the host name displayed when you run transaction SM51 in the BI system?
Pam

Error 4 when starting the extraction program

Hello Gurus,
Yesteday I got one error "Error occured in the source system"that "Error 4 when starting the extraction program" and "error in the source system" has given, it has affected all the loads,please any one give me solution for thia it is urjent.
Please find the error message bello.
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Service API .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is
Thanks,
Muddu Reddy.

Hi sekhar,
You can try this. you right click on the datasource and click on display in source system it takes you to the R/3 system enter the user id and password so u can now see the datasource in the R/3 so now click on back f3 so now u vl be in BI now replicate the datasource and try to load the data. I think now it should work fine.
Tell me if you still face some problem.
Thanks
Ram

I have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. please help

i have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. only the downloaded new os x yosemite in the os x base system. please help

Please try again after taking each of the following steps that you haven't already taken.
Step 1
Reset your computer’s PRAM.
Step 2
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Step 3
Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
Step 4
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested.

Problem to install Indesign CS6, "an error has occured during the extraction".

Hi, I downloaded it multiple times, did several attempts on different computers, I always got the same result: "An error has occured during the extraction. Download Indesign CS6 again"

check your file sizes.
if they are correct, use a different browser.
if they are incorrect, use a wired or different connection.

Error while creating Function module extracter

Hello Guru's
I am getting error while FM extracter creating.
Have created FM and Extract structure and while creating datasource using these where i am getting error as given below
1> ZV_ZFRT_INVOICES(Datasource): TABLES-paramter E_T_DATA for extractor Z_ZFRGT_INVOICES(FM) is missing
2>(DS)ZV_ZFRT_INVOICES: Field ZEILE of the provider structure is missing in extract str. ZVZFRT_INVOICES(Extract structre)
3>(DS )ZV_ZFRT_INVOICES: Field EBELP of the provider structure is missing in extract str. ZVZFRT_INVOICESExtract structre)
Please some one can help me to get out of the issue.

HI Aryan,
No need to create FM on your own. You can copy the FM from Function Group RSAX.
The procedure to create FM extractor is as follows:
1) Create an extract structure.
2) Go to SE80. Select Function Group RSAX , right click and then copy.
3) Give your own name to the function group to copy.
4) Select one appropriate FM from the list of FMs provided. eg FM RSAX_BIW_GET_DATA_SIMPLE.
5)Specify the name of new FM you want to create.
6) Go to SE37 and open the FM you have created by copying from Function Group RSAX.
7) no need to change the import tab.
8) On tables tab, for paramerter name E_T_DATA under asociate name specify the name of extract structure you hav created.
9) Under source code tab make the changes in the source code only to customise it to your requirement. eg: declare the database table you are using, make changes where datasource is in picture, etc.
I have created a generic DataSource with the help of above procedure.. I hope you will find it helpful...
Regards,
Geetanjali

Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

Error message when trying to extract and install

Why do I keep getting an error message for CS6 beta when I try to extract and install, message file missing?

I assume you downloaded from here: http://labs.adobe.com/technologies/photoshopcs6/
Did you successfully download the file and check file sizes match? Do you extract ok? PC, I assume? What OS are you using?
How far did you get in the installation? Did you select TRY rather than enter serial number? Did you enter your Adobe ID?
By the way, you should change your name to something other than your email as the bots will go nuts when they find that and you may get spam.
Pattie

Error while doing the LO extraction

Hi Gurus,
I am trying to extract data from the purchasing 2LIS_02_ITM data source through LO extraction.
While filling the Setup tables in the R3 sytem I got error with the followng message "Maintain conversion factor for USD / DDK(Currecy type M). Please suggest me what I have to do now with step by step procedure.
For your information I am working in the R3 quality sytem now and it worked fine in the development system before.

Hi,
You have to ask your R/3 Team to maintain this conversion in R/3.
You have created a purchase order that is assigned to an SD order. The purchase order belongs to company code A and the SD order belongs to company code B. Company codes A and B have different local currencies. When you post an invoice in the 'Enter Invoice: Initial Screen' transaction (MIRO) with a company code that differs from code B, the system issues error message SG 111 ' Maintain conversion factors for B/A (currency type &)'. For this, you require the exchange rates between the local currencies of company codes A and B.
IMG...>General Settings..>Enter Exchange Rates
go through this link for more details
http://help.sap.com/saphelp_46c/helpdata/en/7f/72369adc56d11195100060b03c6b76/frameset.htm
Regards,
Anil Kumar Sharma .P
Edited by: Anil Kumar Sharma on Jul 21, 2011 2:00 PM

Error 1 on multi file extract

hello
im trying to extract a multi part zip file (zip.001 zip.002 etc.) and when ever i try and do it i get a message that says "error 1"
screenshot -> http://b.imagehost.org/0289/Picture_1.png
ive tryed this other accounts on my mac and i get the same result
please help i need to open this zip ASAP for a project

it's all good now bad file name that all

ERROR OGG-00685 begin time : extract process abending

Hi Gurus,
I have installed Oracle Golden Gate in the below environment.But unable to start extract process I am newer to OGG and its production setup.
Primary site (source): This is production DB and up and running.
RAC 2 nodes
Oracle RAC 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
target Site (destination):
Standalone single server - Non RAC
Oracle version 11.2.0.1.0
ASM
Oracle GoldenGate 11g Release 1 (11.1.1.0.0)
Enterprise Linux Server release 5.5 (Carthage)
Processor Type x64
OS 64 bit
Error is as below:
2012-08-12 22:57:09 ERROR OGG-00685 begin time May 1, 2011 11:06:53 AM prior to oldest log in log
2012-08-12 22:57:09 ERROR OGG-01668 PROCESS ABENDING. Please suggest , I am stuck
Thanks
Edited by: user13403707 on 16 Aug, 2012 9:07 AM

ggsci> alter urban begin now
Or explicitly specify a date time:
ggsci> alter urban begin 2012-08-13 12:00:00
I also noticed that this line:
table urbanlive.*
Is missing the closing semi colon. It should be:
table urbanlive.*;
Make sure you read on open transactions. This is important when you BEGIN capturing change data and performing your initial synchronization. If you don't understand this you will not initialize properly and you'll always be out of sync.
Good luck,
-joe

Error in CO-PA Data Extraction

i created a CO-PA data extractor using KEB0 & it works in the Development system.
Then i transported it to Production & when i try to extract data to BW it gives the following error....
"Syntax error in generated program" and "Errors in source system"
in the detail section the error says "Error occurred in the data selection"

Hi Chris,
We are also facing the same issue in COPA extraction. How did you solve your issue? Please let us know the solution if you have any. Here are the error details...
Syntax error in generated program
Message no. RD117
Diagnosis
A syntax error has occurred in the generated program for the CO-PA extractor:
MSGV1: "RSFHGEN2"
MSGV2: "Field "ZOXDE10248" is unknown. It is neither in on"
MSGV3: " 7"
MSGV4: ""
Thanks,
Yogesh

Error 101- Installer won't extract files, manual 7z unzip fails, plenty of hard drive space

PC, Windows 7 64-bit. Dual hard drive setup, primary dirve has 7 free GB. Downloading trial to second hard drive, has 466GB of free space. Download taking 24 hours each try.
First try: Error 101- Could not extract files, check for sufficent disk space and reset download. Cleared off 6 more gigs of space on my primary drive incase that was causing the error. Restarted download.
Try #2: Same error. I dug around and found the full download .7z file. Tried everything to unzip, but every 7zip program I tried gave me an error, said it wasn't an "archive' file.
Restarted Adobe download assistant, got a pop up that said roughly "do you want to retry the current download, click yes to retry, click no to start over" I clicked Yes. It started over. I slammed head on table.
Now have 20 hours remaining on my third attempt at downloading. Maybe we can get this fixed before the error message shows up again?

Whenever you delete caches it's a good idea to restart the computer so they can be properly rebuilt. So start by doing this:
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Error 6 on RSS_PROGRAM_GENERATE on extraction.

Similar Messages

Maybe you are looking for