Error 70001 when trying to change back region of DVD. Said had 2 changes

left but wont let me and comes up with that error. I have no recollection of ever changing the region before. How can i solve this issue? I want it to be region 2 permanently.
Would it help to do some sort of restore? if so, how do i do it?

If I were you I would change your DVD insertion preferences by going to System Preferences and in the CD's & DVD's change the DVD video preference to ignore. Use something like VLC Player to play your DVD's. This application will play any region DVD.
I recently bought an iMac 24" 2.8Ghz from Apple Online Store. The DVD drive region was pre-set to Region 1. I was asked to change the region to 2. I phoned Apple asking them why they sent me a drive set to North America. I refused to change the Drive Region. They agreed to send me a replacement iMac. However the replacement was also set to Region 1. Also the replacement Mac was SECOND HAND. They couldn't give me an explanation as to why I had been sent a used iMac. I was furious and demanded my money back. All new iMacs bought in the UK should have their DVD Drives set to Europe: Region 2 not North America. You should under no circumstances accept this from Apple Uk.

Similar Messages

  • Lr 2.2 broken - an error occurred when trying to change modules

    I get the message "an error occurred when trying to change modules when I try to go into library mode. quit and restart didn't help. Catalog verified as okay. Worked before update.

    Deleting preferences did not help. I also tried creating a new lightroom catalog, and can navigate around it fine. However, if I do something like change to Library in the new catalog and then open my useful catalog, I immediately get the error changing modules message. I tried reimporting my useful catalog, which also did not work. My understanding is that this error is some kind of catch all which could indicate any number of different issues - is there a way for me to roll back to 2.1? Is there a reason that so many people are having an issue with this upgrade (there are posts in other forums and blogs about people having this same issue after upgrading).

  • "an error occurred when trying to change modules"

    When I switch repeatedly between Library and Develop with the R and E keys, I always sooner or later run into a problem where nothing happens when I press R. Really that should go the Develop module and enter crop mode -- what I'm usually trying to do, when this happens, is crop a bunch of photos. So I'll be using Library mode to identify the photos that need cropping, stepping through photos with the arrow keys, then when I find one that I want to crop, I press R, enter develop+crop mode, crop the photo, press E to return to library+loupe view, and continue.
    Sometimes this works 10 times, sometimes it only works twice, but always, relatively soon, when I press R, "nothing" will happen. Actually what's happening is an error dialog appears saying "an error occurred when trying to change modules", then the error dialog immediately disappears before I can read it. I know what it says, because if I click the Develop module with the mouse, I get the same message but it sticks around until I press OK.
    Once this happens, I'm entirely unable to use the Develop module until I quit the program. I had to quit and restart LR about 20 times during an hour of working with it last night, and this morning, in the first 15 minutes, I'm already on the 3rd restart.
    Anyone else see this?
    Details: LR 1.1 on Mac OS 10.4.10, 4-core Mac Pro, images are a mix of JPG from a pocket camera and NEF from a Nikon D40. I don't think it is related to the specific images, as it strikes apparently at random, and after exit and restart, I can crop that same photo, but a different one will eventually cause the same problem again.

    Sean, thanks for the Return key tip. I knew about that at one point, but lately I was trying to use Enter (the one on the numeric keypad, at the very lower right corner of the keyboard, which is really easy to hit with my thumb even when my hand is on the mouse! And Enter doesn't invoke the crop, so I forgot that Return did). That is a better way.
    I don't see the RE problem on my MacBook, only on my desktop computer, and that one is also experiencing other flakiness (
    metamatt, "missing text / thumbnails / many Lightroom UI elements disappeared" #, 18 Aug 2007 3:08 pm) so I think I'm going to try a complete reinstall there.

  • Error message when trying to change Foreground/Background color

    Just in case anyone is having this problem in Photoshop CC where when you try to change/exchange or set to default the Background/Foreground colors and you get an error message of something like "Could not complete because of program error". I found the cure for this in an archive from when CS6 was in beta testing. Basically you have to delete the preferences file and restart the program. Here's a link to the article  http://forums.adobe.com/message/4336237. Apparently this "beta" problem can still occur as I am using the most recent version  of Photoshop CC.

    If you are trying to change the settings of your Router using the LELA software, and if you are getting an error message "Unable to Save the Data" its better you can exit from the LELA software and change all the Configuration settings on your Router Manaully.
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings,  Click on the Wireless tab
    Below you can make the changes on your Router ( SSID, Channel and let the SSID Broadcast should be Enable) and click on Save Settings... 
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the security Mode to WPA Personal and under Passpharase type in your Security password and click on Save Settings.. 
    Once done, Now on your computer try to connect to your Wireless Network. Once connected you should be Online from your Computer. 

  • Error MM335 when trying to change profit center on material master record

    We are trying to change the profit center that is assigned on the u201CSales: general/plantu201D tab in the material master (same as what shows on the u201CCosting1u201D tab of the material master).
    The following error message appears:  u201CYou want to change the profit center but there are still material stocks u2013 Message no. MM335.u201D
    Our SAP version is SAP ECC 5.0 with support pack 19.
    This particular material that we are trying to change only exists within one plant and one storage location in SAP.
    I have done the following in order to try and resolve this issue:
    1. Removed all inventory from the inventory management and warehouse management side for the material.
    2. Closed all open purchase orders and process orders for the material.
    3. Looked at the MD04 screen to verify there are no outstanding documents for this material.
    I also searched for OSS notes and found note #1249513 which was applied to our sandbox environment.  This note did not fix our problem.
    I had a developer to debug the code that is being triggered upon making a profit center change.  Two important pieces of information he found is that the SAP code is:
    1. Looking to see if the u2018New G/Lu2019 is turned on and u2018profit centeru2019 is active in the new G/L.
    2. Looking to see if previous period stock exists for the material.
    The code is then setting a flag which causes the error message to appear.
    I have found other comments in the forum stating to change the error to a warning for message MM335.  I believe this is not the correct solution; as this would allow a change to a profit center even if stock exists, open orders exist, etc.  I also know we could trick the system by temporarily changing the message to a warning and sending that through to production, changing the material master and following up with a transport to change the message back to an error.  This would work, but we want a final resolution to this problem.
    I believe that 2 OSS notes that were included in our latest support pack upgrade has caused this problem.  Those notes are: 1057674 and 1106510.
    I plan on opening a note with SAP, but was wondering if any users have experienced this same problem after a recent support pack upgrade.
    Regards,
    JH

    Following is additional information regarding this problem.  We were able to successfully change the profit center on some of our materials by making sure there was no stock in previous period and current period (and no open sales orders, purchase orders, etc.).
    - JH

  • "Lock table overflow" error msg when trying to change a repot program

    hi ABAP experts,
    We are getting the following error msg
    "Lock table overflow
    Choose 'Display object' or 'Cancel'.".
    Click the question mark on the same error msg window, then the detailed error msg would like this:
    Message no. MC603
    Diagnosis
    This table overflowed when trying to enter SAP locks in the lock table.
    System Response
    The locks could not be set.
    Procedure
    Contact your system administrator. If this error occurs frequently, change the size of the profile parameter 'enque/table_size'. This parameter defines the size of the lock table in KByte.
    What would be the reason and how to resolve this problem?
    <REMOVED BY MODERATOR>
    Edited by: Alvaro Tejada Galindo on Apr 2, 2008 1:03 PM

    Hi,
    This could be bcos the lock table is getting overflowed beyond the allotted space. Check if any other program/BAPI is causing continuous creation of locks.
    To analyze choose (SM12) Extras Statistics to display the statistics. These are the statistics that have been compiled since the last time the lock server was restarted.
    Check the below link for more information on SAP Lock Concept.
    http://help.sap.com/saphelp_nw04/helpdata/en/7b/f9813712f7434be10000009b38f8cf/content.htm
    For details on Subsequent Analysis of Lock Table Overflows, check the below links.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/43d2416d9c1c7be10000000a1550b0/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/f0/b57338788f4d72e10000009b38f8cf/content.htm
    Hope this helps. <REMOVED BY MODERATOR>
    Thanks,
    Balaji
    Edited by: Alvaro Tejada Galindo on Apr 2, 2008 1:03 PM

  • Getting "layer break" error message when trying to Preview a single sided DVD, or build an ISO image or disk folder

    Hi!  Hoping someone might be able to help with an odd problem.  I haven't found anything in the forums or the web that match my symptoms.
    I've been using Encore CS6 (v6.0.1.013) on a MacBook retina over the past year to successfully create a number of single sided DVDs with menus, chapters, and all that.  I usually make a copy of a previous DVD project, and then replace video assets with the new files and transcodes, move and rename chapter markers, and rework the menus in Photoshop.  I then will build ISO images for both DVD and Blu-Ray (both single-sided), and use those to burn many copies of each DVD for clients.
    This week, while developing one of these projects, when trying to build a DVD ISO image that looked like it would fit on a 4.7 GB DVD, I received the "layer break" message ("The chosen layer break does not satisfy dual layer requirements.  To fix this, either set a new layer break manually, or choose to set layer break automatically.") because (I'm guessing) the material was too long for the 4.7 GB DVD (the Build screen now shows about 5GB of material are in the project).  This is the first time I've seen that message - usually Encore just tells me the material is too big for the DVD.
    I re-transcoded the material down to well under 4.7 GB (about 3.9 GB), reverted and replaced the transcoded files, and now the DVD build screen shows that there are about 700MB free on a 4.7 GB DVD.  But I still have not been able to build any version of the DVD (image, folder, disc), without getting the "layer break" message.  I also now get this same layer break message when trying to "Preview from Here" any menu, killing my ability to preview the DVD menus in Encore.
    Just to see what would happen, I chose an 8.4GB Dual Layer DVD, and chose "manual" instead of "automatic" for the layer break selection, but never got the layer break selection dialog box, just the "layer break" error message.
    I typically build both DVD and Blu-Ray images from the same material in the same project.  I use different transcoding settings for each, and I have been able to build a Blu-Ray ISO without this "layer break" error on the Blu-Ray build (which is about 24.5GB when built).  And as I mentioned before, this is the first project on which I've even seen this layer break message.
    Any suggestions would be greatly appreciated!  I'd rather not recreate the project from scratch, but I'm worried that I may have to.
    Thanks
    Jon

    The total project being small enough may mean you have one layer that is too big. Both layers have to be smaller than half the disk, right?
    Be sure you "run as administrator" for dual layer projects.
    Encore may set the layer break correctly if it finds a good place, but there are numerous complaints about it being unreliable.
    Build to a folder (no layer break is set), then use ImgBurn to build and ask to be prompted for layer break. ImgBurn is also unreliable under some circumstances.
    The most frequent problems appear to be when there is no good location for a break. Do a search for "layer break imgburn" and you will see a variety of strategies.
    http://forum.imgburn.com/index.php?/topic/1777-how-to-create-a-double-layer-dvd-video-imag e-file-using-imgburn/
    Also see these posts:
    Neil Wilkes
    http://forums.adobe.com/message/3466255#3466255
    Neil Wilkes
    http://forums.adobe.com/message/4054265#4054265
    Neil Wilkes
    http://forums.adobe.com/message/4054269#4054269
    Jon Geddes
    http://forums.adobe.com/message/4002647#4002647
    shuchi shrivastava
    http://forums.adobe.com/message/3905911#3905911
    Jon Geddes and Neil Wilkes
    http://forums.adobe.com/message/4003221#4003221

  • Why do we get First operand...error message when trying to change password

    Hi
    I'm new at posting here, so sorry if I'm doing this wrong. I did search first to see if there was info on this already, but I didn't find anything. (If there is already something out there, please point me to it.)
    We are using PeopleSoft Financials 8.8 SP1.
    We have basic workflow enabled in expenses which generates an email to an approver with a link into PS Expenses (right to their worklist area) when they have an expense report to review. When the user clicks the link they are directed to the PS sign on page. Normally they can sign on without any problems. However, if their password has expried they will be redirected to a page which says "Your password has expired. Click here to change your password." When they click the link they recieve a blank page with an error message that starts out as "First operand of. is NULL, ".
    I cannot replicate it in our test environments.
    I have confirmed that we have the PSWDEXPR permission list in our environment.
    I have also confirmed that our template for Change Expired Password is correct (PeopleTools > Portal, Structure & Content > Folder, "Tools - Hidden" > Change Expired Password > Template is PRTL_TEMPLATE_PASSWORD_EXP)
    I have also tried changing our brower cache to 0. (PeopleTools >Personalization >Personalization Options > Option Category Level = PeopleTools, Format tab, User Option of METAXP. I changed METAXP to 0 instead of 900 which was set by default).
    The odd thing is that if the user waits one day, they can use the link in the expense workflow email and change their password no problem.
    Also, when our users do experience this problem, if they log into PeopleSoft without using the link from the expense workflow email the change password function works fine.
    The link seems to be okay since it works fine at all times unless the user is prompted to change their password.
    Any suggestions?

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

  • "Unkown Error (-50)" when trying to change iPod settings via iTunes

    Hello everyone.
    I got an 5.5 iPod Video (30gb) for christmas and I can't update the name of the Ipod nor change the settings for music, TV shows, movies, podcasts, pictures or even reset it!
    I can however sync music, tv shows, movies and pocasts (not pictures).
    So I called Apple the other day and told them about my problem. The guy I was talking to told me that the only option avaible was to send the iPod to Apple and have them repair it. And so I did. It came back today with 1.2 update installed, instead of 1.2.1 which I used before I had the iPod sent for repair. The enclosed papers said that they (Apple) could not find any problems on the iPod itself and it's batterys and that "it met Apples specifications for acceptable performance, usablity and/or functionality."
    Yeah well... It doesnt. I'm using a PC with Windows XP, Service Pack 2 and I have USB 2.0. I have the latest version of iTunes and I had the latest firmwire update for my Ipod (1.2.1) and it didn't work.
    When I first plugged the iPod in today when it had version 1.2 installed it worked, but the next time I plugged it in.. well, it didnt work. So right now I'm using 1.2.
    I've tried re-installing iTunes and restoring the iPod via both iTunes and on the iPod itself. Nothing works. Can someone here help me out?
    Btw. I'm using an iPod dock.

    Edit: I am able to change settings WHILE my library is beeing synced...

  • Cannot open any of my Lightroom catalogs. "Error occurred when trying to change modules."

    Bought a new 2013 Mac Pro and did a new install of Photoshop and Lightroom. Then physically moved my data drives over from Mac Pro (10.8.6), but LR won’t open any of the existing catalogs on the new computer (10.9.5). Followed steps 1-5 at http://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html
    Cannot do step #6 (no access to more than one user at a time).
    Please help.

    TimOlive wrote:
    LR is also unable to open a small LR catalog it created on the internal Macintoch HD SSD, back when this copy of LR was installed.
    How and where did you create that small catalog? Sorry for the question, but you do have licensed version of LR 5 and you only use it in your old computer? In other words, you do not have a second copy installed on a laptop, do you?
    If you have a licensed version and have only install it in your old computer and you cannot create a brand new catalog on the SSD with the enclosure disconnected (forget about the catalog already on the SSD drive), it is likely to be the installation. If this the case, try downloading the 5.7.1 and reinstall (Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 5.7.1). I would recommend to do the reinstall with the enclosure disconnected, after it is done check if you can create a catalog on the local drive, if you ca connect the enclosure.

  • Error message when trying to change password...

    I get the following error when I try to change the router password in the main splash window(left panel)...
    Error code: 82BD0302
    Error description: An HNAP call to the device was rejected due to incorrect authentication credentials.
    Model name: unknown
    Model number: E3000
    Serial number: CVQ01L209371
    Firmware version: unknown
    Operating system: Windows XP SP 3
    Software version: 1.3.11006.1
    Connection type (WAN): unknown
    IP address (LAN): unknown
    IP address (WAN): unknown
    Computer IP address: 192.168.1.114
    Also, this is very important... the router has changed the main admin password to the wireless pasphrase and I cannot undo it! When I change the password back to what I want it to be and save it acts like it is working but then when I start up Cisco Connect it tells me the password has been changed back to what it was prior to changing and saving it.

     Also, this is very important... the router has changed the main admin password to the wireless pasphrase and I cannot undo it! When I change the password back to what I want it to be and save it acts like it is working but then when I start up Cisco Connect it tells me the password has been changed back to what it was prior to changing and saving it.
    Sounds to me like you'll have to uninstall / reinstall Cisco Connect.

  • Get an error message when trying to do back up to time capsule: This record is already in use please try again, get an error message when trying to do back up to time capsule: This record is already in use please try again

    Cannot do back up with time capsule.
    I get an error message sayng that this disc is already in use. I have tried to wipe and restart but to no avail.
    What could be wrong?

    Pull the power cord from the back of the Time Capsule
    Count to ten
    Plug the power cord back into the back of the Time Capsule
    Wait a few minutes, then try a backup again

  • I get an error statement when trying to change a theme in Keynote.

    I'm using Keynote '09 (5.1.1) and Snow Leopard on a 2008 Macbook Pro. When I open an existing presentation and try to change the theme by clicking on a slide in the left hand column in Navigator view and then click "theme," I get an error message that says "An unexpected error has occured. Please quit and restart Keynote." Anybody have this problem?

    I went to the Apple Genius Bar for help.  Somehow when I downloaded Mountain Lion one of the mail accounts on the computer changed from an IMAP account to a POP account.  The POP account doesn't enable the links in email.  It was a quick fix.  Just go to prefrences in your mail account and change it to an IMAP account.  Hope this works for you as it did for me. 

  • Receiving an error message when trying to do back up my files with windows backup and restore files

     I received this error message from my windows vista ultimate automatic backup did not complete. I clicked details  in the message and it says " An error occurred. The following information might help you reslove the error: (Access is denied
    0x80070005). Can Anyone help me resolve this issue? Thx.
    DAG

    I have been backing up to the same location for almost a year. I had trouble backing up to this location went I first set it up it is my external HDD. I resolved it after following suggestions from someone from this forum but that thread reply has been
    deleted I looked for it I found the thread but the information in the reply is gone and I can't remember what I had to do to get it to work again.
    DAG

  • Error message when trying to change brush colors.

    Using CS6 beta and everytime I use the color picker or hit the x or d key I get this message: could not complete your request because of a program error.
    Using Windows 7 64 bi and CS5 works fine.

    A few common troubleshooting solutions:
    Restart Photoshop and/or your computer.
    Make sure your operating system and drivers, including your graphics driver, is up to date. (Check with the manufacturers website).
    Reset Photoshop's preferences: http://forums.adobe.com/message/4209421#4209421

Maybe you are looking for