Error Abap Mapping: object not assigned.

Hi All,
I receive a dump in executing this abap code within the "execute" method.
DATA: ls_dynamic_conf TYPE MPP_DYNAMIC.
ls_dynamic_conf = dynamic_configuration->get_record(
namespace = 'http://xxxx/ca/test'
name = 'FileName' ).
The dump is: OBJECTS_OBJREF_NOT_ASSIGNED_NO
I wish to get the filename and save it in a variable.
Thanks in advance for your kind help.
Regards,
    Giovanni

Hi,
I inform you that this error message is sent in debugging the execute method, outside the PI environment but I do not know if this is the only reason of my dump.
Regards,
    Giovanni

Similar Messages

  • In 3rd party sales error -consumption a/c not assigned to PO auto a/c assig

    Dear Friends,
    while creating va01 for 3rd party sales , error -consumption a/c not assigned to purchase order automatic account assignment.
    i need to do obyc setting for gbb in need to select a/c modifier -what is that ?
    SO is a cost object.
    Reg
    nagesh

    Hi,
    Please review the following notes for more information:
    550388     FAQ: Customizing of third-party and individual Pos
    210997     Accnt assignmt categoriesin third-party and indiv.P
    On creating Purchase order for requirement created for a customer sales order stock, if the customer sales order stock is not valuated, this means a Consumption ( GBB ) account is involved here. If the posting is a consumption account, SAP allows the user to decide whether it should be autotmatically or manually entered. Because of this option, system need this account to be set with Field 'Automatic posting only' to ' '.
    With this field  'Automatic posting only' setting to ' ', whether the account can be automatically or manually entered is then controlled by the field status in the PO creation. If you do not want the user to enter the account manually, then this account should be set to display mode in PO.
    If the customer sales order stock is valuated, then in General business process, this would involve a BSX ( material account )
    postings. Normally this is automatically derived during PO creations. No manual enterring is allowed. Thus if it is correct to set this account with field Automatic posting only' setting to 'X' in FI settings.
    Please read the note 37563.
    Please check if note 842977 is present in your system.
    regards
    Waman

  • Web template :Error Valid Data provider not assigned

    Hello Friends we have the web template that was working before , we did the upgrade to SP13 from SP11.
    It gives the error Valid Data provider not assigned and
    Bad integer Parameter value of Parameter BLOCK_COLUMNS_SIZE of Object item:ANALYSIS_ITEM:ANALYSIS;
    Please help where do i need to assign the Data provider beacuse the Values are same for Dataprovider as before
         Portal Runtime Error
    An exception occurred while processing your request
    Exception id:
    See the details for the exception ID in the log file.
    Thanks
    Soniya
    Message was edited by:
            soniya kapoor

    Open the template in WAD and do a validation against the server and make sure the template is well formed.
    Also make sure you apply BI JAVA Patch 1 for SPS 13.

  • Bdoc error : Plant IT01 is not assigned to any location

    Hi Experts,
    I have downloaded the Plants from r/3 to CRM [7.0] using object DNL_PLANT through /nr3as. I have checked the entries in /nCRM_LOCMAP, all plants are downloaded to CRM except IT01 & MS01.
    While downloading MATERIAL from r/3 to CRM, i am getting the following bdoc errors
    Plant IT01 is not assigned to any location
    Plant MS01 is not assigned to any location
    Since these do not exists in /nCRM_LOCMAP, i can see that i am getting this error. I have re downloaded DNL_PLANT & checked the status of completion as green. Still these two particular plants are missing.
    Also, when i checked the material [for which i am getting the bdoc error] in r/3, i can see that plants have maintained for that material.
    Is there anyway, to fix the issue?
    Appreciate if someone can suggest a solution on this.
    Thanks & Regards,

    Hi Chandrakant,
    There are no filters set for this object. Also, i took your suggestion, & created a BP with role plant & maintained the details in  /nCRM_LOCMAP. Reprocessed the bdoc's, & i am done, worked finally.
    Thanks a lot for your valueable solution. I have another issue in bdoc error which says " Check-digit in GTIN 00001216000000 (unit of measure KG) is invalid"
    This is the only one i am getting in /nsmw01 & almost in all the bdocs erros. I did search online, but have not got any suitable solution on this.
    Can you help me resolving this issue also?
    Thanks & Regards,

  • Error TTB1: You have not assigned business partner B1000 to a customer

    Hi,
    When trying to post the costs of a forex transaction we receive this error message: You have not assigned business partner B1000 to a customer ; Message no. FLBP116. When posting these costs (on a P&L account) we go through a finance interface to derive a CO object (network activity) from PS. Strange thing is that we don't have this error in Dev or QAS but only in acceptance which is a copy of prod... The interface works fine for costs from guarantees and L/C which goes to an other network activity in PS.
    Any recommandations on this? The BP functionality has never been used befor by my customer.
    Thanks in advance, and this a week befor possible go live...
    Hans.

    Update in PS was needed...

  • Internal error Occured mapping can not be opened - while opening interface

    Hi Gurus,
    I Am using ODI 11g to load data from Oracel to Oracel database using different schemas as a source to load facts.
    for the first time its loading sucessfully and when i try to open the same interface to see the mapping its showing the errror like *"Internam error Occured mapping can not be opened"*
    Tis is very urgent to resolve as per my project neeed.
    Please suggest steps : how to resolve the issue.
    Thanks in Advance.
    regards
    sri

    While the iTunes app is being updated, you are correct, it cannot be opened.
    This is true of all Apple apps on your Mac.
    iTunes is not very large compared to other apps.  Let it update, then open it.

  • Error : DB Mapping does not exist for the Host in iSetup

    Hi Experts,
    We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
    Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
    EBS Version : 12.1.1 with 11.1.0.7 DB
    OS : RHEL 5.3 x86_64
    Any idea much Appreciated .
    Thanks in advance,
    Regards,
    900076.

    900076 wrote:
    Hi Experts,
    We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
    Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
    EBS Version : 12.1.1 with 11.1.0.7 DB
    OS : RHEL 5.3 x86_64
    Any idea much Appreciated .
    http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
    http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
    Thanks,
    Hussein

  • TBB1 Error as "You have not assigned partner to the customer"

    Hi All,
    when running TBB1 for a transaction we are getting the error as "You have not assigned "X" partner to the customer". Did anybody face the issue like this may share the inputs. Thanks.
    Regards,
    S.Sumana.

    Hi Jasmine,
    I have created two BPs (example BP 1 and BP 2) and I created two transactions (TM01) under each Business partner. The issue regarding "Assign customer role to BP" is coming only with respect to transactions created under BP 1 while running TBB1 for the particular transaction.
    The TBB1 run for the transactions created with the BP 2 is absolutely fine.
    I want to know what is the dfference between the two Business partners and what is it that driving the error "Assign Customer Role to Partner". I tried to find the differences between both the partners but apparently couldnot find any. Please help. Thanks.
    Regards,
    Sumana.

  • Regarding error "Field symbol is not assigned." during print preview

    Hi experts,
        I am getting dump while trying print preview for particular POs in ME23n transaction(ECC 6.0). Please refer the below dump error:
    Runtime Errors         GETWA_NOT_ASSIGNED_RANGE
    Date and Time          29.09.2009 19:30:39
    Short dump has not been completely stored (too big)
    Short text
         Field symbol is not assigned.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLSTXC" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         A field symbol that was not assigned was accessed
         (data segment no. 32769).
        The field symbol is no longer assigned because there was an attempt
        makde previously in a Unicode program to set the field symbol using
        ASSIGN with offset and/or length specification. Here, the memory
        addressed by the offset/length specification was not within the
        allowed area.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "GETWA_NOT_ASSIGNED_RANGE" " "
        "SAPLSTXC" or "LSTXCFFT"
        "FT_COMPOSE"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
       2. Corresponding system log
          Display the system log by calling transaction SM21.
          Restrict the time interval to 10 minutes before and five minutes
       after the short dump. Then choose "System->List->Save->Local File
       (Unconverted)".
       3. If the problem occurs in a problem of your own or a modified SAP
       program: The source code of the program
          In the editor, choose "Utilities->More
       Utilities->Upload/Download->Download".
       4. Details about the conditions under which the error occurred or which
       actions and input led to the error.
    I am getting this dump only for few POs.. Rest of the POs are able to print. I am not able to find notes for this issue. Is there any SAP notes available for that  or Is there any configuration issue related to this?
    Please provide solution for thsi as soon as possible.
    Thanks and Regards 
    Subbu

    A field symbol is not assigned, but thats what the dump is telling you. Mostly this happens, when fields or function modules are stored by name, like the fieldnames in the fieldcatalog in an ALV report. It a field referenced in such a way does not exist you will get this error. Always store fieldnames and function names in capital letters and check mistyping of 1L 8B and so on.

  • Error with "Mapping Program not Found"

    We exported all of our XI development from DEV and imported it to Prod. We have not changed anything at all. Now, even though I have authority I can't go into EDIT mode in Prod.
    The main problem is that even though everything imported into Prod without error, when we run our program we are getting the following error:
    <b>="MAPPING">NO_MAPPINGPROGRAM_FOUND </b>
    What could have changed and were do I start to look?
    Thanks in advance, will reward points.
    Mike Curtis

    Micheal,
    You dont need to externally import XSD's and WSDL's. If you import the whole software component or the whole namespace then they will come automatically.
    Check in message mappings whether you can see the mappings or not? I think you might have exported object by object not the whole SWCV. If it is yes then you also import the message mapping. Also check in your change list whether there are any objects. If yes please activate them.
    By the way you dont see only the one message mapping you are tyring to check or all of them? Dont edit anything in production. Its not good. So dont enable the edit button as other threads reply.
    ---Satish

  • Info Record - Error Message "Company Code not assigned to Country"

    Hi,
    I am a beginner in SAP MM.
    I am trying to Create an Info Record(ME11). After enter the material, Purchase Org., and Storage Location.  While saving the data error message is being displayed as "Company Code not assigned to Country".
    Please let me know the reason for this error.
    Thanks,
    Vinod.J

    Hi Vinod,
    The error might because of few SPRO setting are missing about the Company Code, (to which your Material/ plant/ P. Org. of your Info record are assigned/ maintained)
    Check whether customizing given in below link is done,
    http://www.sap-img.com/financial/company-code-not-assigned-to-country.htm
    Regards,
    Pravin

  • Reverse Termination Error  The employee is not assigned to a Payroll

    Hello,
    I am trying to reverse terminate an employee, but I am getting the following error while doing so.
    Oracle Version : Release 12.1.1
    "APP-PAY-06047: This employee is not assigned to a Payroll
    Cause: You cannot create Nonrecurring, additional, adjustment or override element entries for employees who are not assigned to a Payroll."
    Please if anyone can help in resolving this error, and what might be causing this error, as all other employees are successfully reverse terminated, except this one.
    Thanks and Regards,
    Deepti

    Hi Gaurav,
    Actually the patch will be applicable, if the scenario matches with the bug. But the scenario is not as mentioned in the mentalink note cause section.
    Hence I cannot apply this patch for this issue, when the cause doesnt match. Like you, even I searched everywhere, but this issue is not logged or resolved anywhere.
    Let me know, if you get any workaround or solution for this.
    Thanks for your help.
    Thanks and Regards,
    Deepti

  • Error : Interface mapping does not exist in runtime Cache

    Hello Guys
    I have a simple SOAP-To-RFC connection which was working fine until recently. I have not made any changes
    but the data is not getting transfered from one point to another.
    I checked SXMB_MONI and saw the following error:
    Interface mapping http://cincom.com/config AddConfig does not exist in runtime cache
    Then I went and checked SXI_CACHE and it says 'Cache contents are upto date' with a green light.
    Just to be on the safer side, I shutdown and restarted XI server selecting All tasks.
    But still has the same problem.
    Can some one help me with this? I would really appreciate it.
    Thanks
    Ram

    Hi,
    We too faced the same problem.
    Do the following
    1) Delete the Interface mapping and re-create it
    2) First test your Config with test tool
    /people/paul.medaille/blog/2005/06/24/test-your-xi-configuration-with-the-new-test-tool
    I think here you will find the error on Interface mapp or Receiver agreement
    Then delete the interface det and receiver agreement also and re-create those.
    Make sure that u have provided the sample payload which is taken from MONI--Inbound msg--Payload
    Then finally u will get the success
    Regards
    Seshagiri

  • Getting error in Hiring " Partner not assigned to applicant".

    Hi
    Getting error in hiring " partner not asisgned to applicant". Is any thing missing from erecruitment system. Any infotype not getting updated etc. Kindly provide any solution to this? We have checked the relationship of NA-CP-BP and it has unique ids. We are finding 2 person holding the perner in production because of this. Attach is the screen shot.
    Regards,
    Sarvada Redkar.

    Hi Sarvada,
    The error message is strange - where do you get that exactly? Any additional information for that in transaction SLG1?
    Regards,
    Nicole

  • Javah error java.lang.Object not found

    Hi guys-
    I'm trying to run a javah command to generate a .h file... I'm using windows2000 & jdk1.1.8... when I run the command from DOS prompt I keep getting the same eror as java.lang.Object not found: aborting.. I've checked all the classpath and it seems ok ... I have CLASSPATH=..;c:\jdk1.1.8\lib\classes.zip
    Can anybody help me with this???
    Thanx

    Maybe try ; right click my computer ,click the advanced tab and select enviroment variables,click on classpath and then edit,check if it's correct.I had the sam problem and that seemed to fix it. :)

Maybe you are looking for