Error adding Default roles after transport
we are trying to transport our GP to another system.
the transport imported successfully.
but we are getting below error if we need to add the Default roles in the new portal system.
Administartion -> Assign default roles ->
Error/Message: The process template does not contain roles to which you can assign default values.
Could not retrieve process template
Design time:
Error/Message: 1.Cannot retrieve activity template: Development object does not exist in the database
2. Cannot retrieve object:
Please suggest me if you have faced simiilar issue.
Already I have tried in both from Administartion -> Assign Default Roles -> Select the process, by selecting the process & when we click on Open, this error is populated.
Also in Design time -> select the process -> by clicking on the "Open" , I am getting this error.
Also, I have tried the option to do "Edit All" to change the version of all the objects and transport them to targeted system.
and , also implemented the SAP Note: 1321013.
But in all the above cases, I am getting the same error.
Then tried to remove the Default Roles and assigned all the roles to Initiator, then transported, still when I try to run the process and when I open the process getting the same error.
SAP Note: 1321013:
Terminate all process instances.
Unlock all objects.
Delete all process templates.
Empty trash.
Redeploy process templates.
Release objects after Import.
(http://wiki.sdn.sap.com/wiki/display/JSTSG/(GP)ICannotStartorOpenaProcess)
Similar Messages
-
Adding default namespace after inlinedXML() in OSB
Hi All,
Please suggest me for the following.
We are sending one data in xml format from proxy service.
Following is the message we are getting in OSB to send
<Notification>
<Type>Data</Type>
<Channel>webservice</Channel>
<Security>NONSSL</Security>
<Message>
<type>Transfer</type>
<msg><![CDATA[<Transfer></Transfer>]]></msg>
</Message>
<Destination>XXXXXX</Destination>
<Priority>HIGH</Priority>
</Notification>>
Ideally what we are sending in our CDATA there should not be any change.
but when we are printing out body variable after inlinedxml() function.
its adding default namespace in Transfer tag.
<Body xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns="http://schemas.xmlsoap.org/soap/envelope/">
<Transfer xmlns="">
</Transfer>
</Body>>
why OSB is putting xmlns="" in Transfer tag.
Regards,
ABHISHEK
Edited by: abhishek on Sep 11, 2012 12:52 AM
Edited by: abhishek on Sep 11, 2012 1:04 AMHi ,
Thanks for reply and suggestion. now I got why its adding the namespace.
Now i got the problem. when we are not adding any namespace OSB environment is adding the default namespace.
My use case is :
when the body variable is
<Transfer xmlns=''></Transfer>
My outbound of proxy is following
<?xml version="1.0" encoding="UTF-8"?>
<Transfer xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"></Transfer>
I need my outbound variable is like
<?xml version="1.0" encoding="UTF-8"?>
<Transfer></Transfer>
Then I tried to send the body variable (providing default namespace) <Transfer xmlns='' xmlns:soap-env=''></Transfer>
but still getting the
<Transfer xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/"></Transfer> as outbound variable
Is there any way to remove this namespace from outbound variable.
Thanks,
Abhishek
Edited by: abhishek on Sep 12, 2012 1:38 AM
Edited by: abhishek on Sep 12, 2012 1:41 AM -
Runtime Error 9 on WAD after transports
Hi Experts,
I am << Run time error : 9 Subscript out of Range >> and it throws me out of WAD.
This is happening only in QA after the transports, but Dev is working fine.
I have checked the notes and steps suggested in the previous discussions but none of it is helped.
Please if any one has dealt with this error before and resolved it please help.
Thanks
SarahThis is the only web template in QA and this was the first transport for the template.
I am unable to even get what the error actually is to debug it further other than the message.
I still continue to get the error even after re-import infact even Dev web tempplate also gives the same error after transport.
If anyone has had this error before please suggest.
Thanks
Sarah
Message was edited by: Sarah -
Error in quality enviroment after transport
I have imported a mapping from Development to Quality.I have tested the scenario in Development it was working fine.But in quality when i imported and tested its not working when i execute the interface
I am getting the following error in Trace.
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
Valuable inputs will appreciated...
Thanks
SantoshHi santosh
have a look on theses ...
There is gud explanation by Sergio & Bhavesh at the following thread, plz go thru:
Fundamental questions on transporting XI objects
Transporting objects in XI is different from transporting ABAP objects. As prateek mentioned you can transport XI objects using File system or CMS. By default you can use File system. If you want to use CMS you can transport it.
Transporting objects in XI
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3./people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Transporting Objects IR ID using CMS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f85ff411-0d01-0010-0096-ba14e5db6306
http://help.sap.com/saphelp_nw2004s/helpdata/en/e1/69a740aa053a13e10000000a155106/frameset.htm
You can choose either File transfer methor or CMS. File transfer method is the simplest.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d8f7b2-0701-0010-b09a-cda4cca2c98e
Pls reward if useful -
Runtime Error in Test Client after Transport
Hello SDNers,
I did enhancements to standard SAP component ICCMP_BP_SEARCH in developement system in client XXX of system SSS.
I wanted to test the functionality in client YYY so used SCC1 transaction to transport from client XXX to client YYY.
But when i tried to test the application, it resulted in runtime error.
I had kinda identified the problem while debugging, in the class CL_CHTMLB_CONFIG_UTILITY method CREATE_UI_ELEMENT, it is not taking my Z class references rather it still referring to starndard classes.
My Z classes are created for IMPL class, CTXT class and CN00 class.
If any one has suggestions your help would be appreciated
Thanks in advance.
Best Regards,
SrikanthSrikanth,
Is the definition of the enhancement set defined properly for your test client. This table does not transport and you have to maintain it manually in each client. The view is BSPWDV_EHSET_ASG for SM30. Client is not the first field in the table, so you have to edit this view in each client.
Take care,
Stephen -
Error in Gateway service after transport
Hello All,
Currently I am facing issues in the quality gateway server with the Services. The services are running fine in the development server , but when it is transported in the quality server and trying to run the service it is giving an error
Model 'ZXXX_WORK_CENTER_MDL_0001_BE ' contains error.Contact Administrator.
If anyone has faced this issue and know the resolution please let me know.
Regards,
ArijitHello All,
The issue is resolved now. the problem was due to RFC connectivity problem with the backend ECC server.
Thanks,
Arijit -
Defaults Roles Doubt - GRC 10.0
Hi All,
I have a query regarding default roles in GRC. In the role search screen when the user selects a role, there will be a defaults roles column which shows all existing defaults roles for different systems maintained in GRC.
Actually our client requirement is that when a user selects role for ECC only defaults roles defined for ECC should show up. But currently default roles column shows all defaults roles defined in GRC.
Is it possible to achieve our scenario? Anyone came across same issue?
Regards,
Sai.Dear Sai,
the behaviour is standard as you have defined parameter 2011 as ROLE. To change the output you might need help of an ABAPler.
Alternatively you can change parameter 2012 to REQUEST and then the requestor won't see the default roles as they are added to the request after submission. Only the approvers can see the added default roles.
Best regards,
Alessandro -
I swich to Oracle11g express and create user
CREATE USER LEO
IDENTIFIED BY xy
DEFAULT TABLESPACE USERS
TEMPORARY TABLESPACE TEMP
PROFILE DEFAULT
ACCOUNT UNLOCK;
-- 3 Roles for LEO
GRANT AUTHENTICATEDUSER TO LEO;
GRANT CONNECT TO LEO;
GRANT FER_ADMIN TO LEO WITH ADMIN OPTION;
ALTER USER LEO DEFAULT ROLE FER_ADMIN;
-- 1 System Privilege for LEO
GRANT CREATE SESSION TO LEO;
-- 1 Tablespace Quota for LEO
ALTER USER LEO QUOTA UNLIMITED ON USERS;
and after login i check
select * from SESSION_ROLES
and i have none role
if I set role all works fine.
Why I doesn't have DEFAULT ROLE after login.
Pleas for help .here is the solution
default roles and grants
Edited by: Leo Lakota on 4.10.2012 5:52 -
Post system refresh, "Request IDoc : IDoc with errors added"
Hello All,
Post system refresh, we are not able to execute the data loads.
While loading the Infopackage, the overall status is still showing in YELLOW status. but in the Transfer (IDOCs & TRFC), it shows an Error message as "Request IDoc : IDoc with errors added"
Yesterday immediately after the refresh, we were able to execute the master data loads (full loads)...
However, transaction loads (delta) is facing issues.
Today, we are facing the problem in both master and transaction data.
Please help!!!! Its a very critical issue!!!
Edited by: Siegfried Szameitat on Aug 9, 2011 10:17 AMHi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha -
GP: Process default Roles Cleared when transported
Hi,
I have created an impersonalized form that triggers a process in guided procedures.
I have set the default roles for process as impersonalized form needs all the roles to be defaulted.
Its working fine in the test system. When I transport this to Production, the default roles get cleared. I get an error message when the form is submitted - ERROR_NO_DEFAULT_USER_FOR_ROLE .
Version: Adobe Livecycle designer 7.1
NW2004s SP15
Thank you,
Vasu
Edited by: Subramanya Srinivas Mullapudi on Feb 6, 2009 6:41 PMBut as I'm using an Impersonalized form, even when I assign the default roles, the impersonalized form still pointing to the process with no default roles. Its not recognizing the default roles assigned in administration.
I cannot change the process to add default roles (in production). So whenever I submit the form I get the error "ERROR_NO_DEFAULT_USER_FOR_ROLE"
Complete error:
SAP Guided Procedures - Error Page
What happened?
An internal error occurred while processing your request
What can you do?
Try again later. If the problem persists, contact your system
administrator.
Additional Error Information
FormPostprocessor.ERROR_NO_DEFAULT_USER_FOR_ROLE
com.sap.caf.eu.gp.base.exception.EngineException:
FormPostprocessor.ERROR_NO_DEFAULT_USER_FOR_ROLE at
com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.createProcessRoleInstance(FormPostprocessor.java:176)
at
com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.prepareProcessRoles(FormPostprocessor.java:157)
at
com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.initiateProcess(FormPostprocessor.java:289)
at
com.sap.caf.eu.gp.model.iforms.postproc.FormPostprocessor.processData(FormPostprocessor.java:564)
at
com.sap.caf.eu.gp.model.iforms.FormPostProcessor.doPost(FormPostProcessor.java:182)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at
java.security.AccessController.doPrivileged(AccessController.java:207)
at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Sorry for any inconvenence -
Error after transport of Virtual Cube with Services
Hi All,
would any body can suggest me how we can change the source system assignment in QA or Production client for virtual Cube with Services.
A virtual cube is created with Services using the settings for RFC and using the logical source system. however after transporting the same to the QA system the Logical Source System has not changed and thus it is giving error " Error occured while determining target system for the logical system" would any body can suggest me how i can change the logical source system assignment in QA system for Virtual Cube with services.
Points would be rewarded appropriately.
Cheers
NoorHi Noor,
Check this link, it may help you.
Re: Transport issue - Source system does not exist
Regards,
Vijay G. -
Portal Run time error when created a seperate role for Transport package.
Hi Experts,
I have created a seperate role for Transport Package(import/export iviews).
Normally we have transport package functionality in system admin.
Below steps i followed for creating the new role(trans admin)
1.Copied SAP provided system admin role to a seperate folder.
2.Deleted reamining portal objects(like UWL, portal display etc ..) except transport packege workset.
3.Renamed the role to trans admin.
I have assigned that role to my self, it is working fine to me when i clcik on export and import.I have super admin role.
when i assign this role to some portal users, Export is not working.
when user clicks on Export role they are getting below error.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): com.sap.portal.system/security/sap.com/NetWeaver.Portal/medium_safety/com.sap.portal.appdesigner.contentcatalog/components/Framework).
Exception id: 12:10_31/08/09_0031_21763550
See the details for the exception ID in the log file
By looking into exception iD also, same error access denied it is showing.
Please Advice.
Thanks
Sony.Hi Raghu,
Thanks for the reply.
I have given full permissions to all users to this trans admin role before itself.
Thanks in advance.
Sony.
Edited by: ambica sony on Aug 31, 2009 1:53 PM -
Open Authorization Objects in role after role Transport
Hi All,
I have transported a R/3 (ECC6, support) role from Dev to QA and Dev (Multiple clients). After transport, Role has authorization tab with status (green) but when i display authorization data i found one new open authorization object (yellow).
I already have generated profile before tranporting. Role is also okay in Dev other clients (We have multiple clients in Dev) with status green and no open authorizations (yellow)
Any feedback/suggestions ?
Thanks in advance
Khasim.This happens when PFUD runs at the same time as you are generating the role. Refer to this note: 355030 - Loss of authorizations after profile generation. Another remote reason could be if your source (DEV) and target (QA) systems use different characters sets. (Note #535554).
If it is the former case, re-transporting your role may just be the solution for you. Just re-generate the role in DEV and initiate a new transport.
Hope this helps.
Ashutosh -
DTP error: Type conflict when calling FM - after transport to Prd
Hi ,
i have asset_attr datasource.it was working in my BW dev.
however after transport to BW prod. when i try to upload data using DTP it gives me an Abrupt error
"0ASSET_ATTR IPDCLNT030 : Type conflict when calling a function module (fiel
Message no. RSDS666"
no more information is given, & the request ends in red.
This is first time i'm using this Infoobject upload.
however all my other transaction data & other master data all are getting uploaded fine.
even Asset_text datasource is working fine.
Did anyone face similiar probs ?
can anyone guide me on this error ?
thanks
rameshHi
Take a look at note 1130907.
Regards,
Chandu. -
hi all,
i get the following error after transport on Q system:
"No object type found for this message; check the activation of the corresponding process"
the trace gives me this explanation:
"could not create BPE proxy for message, no XML object definition found for message 48C56A8CD7D615EEE10000000A9E014F"
In SXI_CACHE the business process has status zero, business process and everythng else in transport is active.
So what else can i do to fix that bug?
Thanks
StefanHI,
Then check the error log carefully. Problem might be some else. If not try to reimport the transport with the help of BASIS.
Also check the status of check table in quality. Is it active?
All ur objects are in single TR? If not the u have to move check table TR first and then later objects TR.
If nothing works then include all the objects in another TR and transport. make sure all are active.
Thanks,
Vinod.
Maybe you are looking for
-
I just switched over to an iPhone 4 CDMA on the verizon network the other day. I connected with my MBP/ w Lion and the sync seemed to go flawless.... All my date was pushed thru the iCloud, but then I saw that my main email address @me.com says that
-
How do I know when my unlock has been processed?
Hi all, Sorry for what's probably a dumb question, but I can't find an answer anywhere. I have an AT&T iPhone 4S, and I recently called them to request an unlock. Since it was on a business account while under contract, they had to submit a request
-
Hello On March 21 I payed the fee for the creative cloud membership for photoshop and lightroom. Up until now (april 11) I did not receive my serial number(s) or downloadlinks. There is only 9 days of free trials left, and I need Lightroom. When can
-
my macbook pro i think has a virus everytime i click on a webpage it redircts me to a gambling site and sometimes i get adverts down both sides of the screen and at the bottom i have turned pop up blocker on bus still the same can anyone help me
-
How are the pWWN list populated in DCNM even before they are logged-in to the switch?
Hello All DCNM v6.2.3 I see that the hosts are not logged-in to the switch, however via DCNM when I try to create device alias I find the pWWNs populated which are not logged-in. How are the pWWN list populated in DCNM even before they are logged-in