Error archiving to standby database

Hi
I get the following error from tyhe primary db when trying to archive to a standby database.
(tnsping is successfull)
*** 2007-02-12 11:24:54.263
RFS network connection lost at host 'test9isb'
Error 3113 attaching RFS server to standby instance at host 'test9isb'
Error 3113 attaching to destination LOG_ARCHIVE_DEST_2 standby host 'test9isb'
Heartbeat failed to connect to standby 'test9isb'. Error is 3113.
*** 2007-02-12 11:24:54.263
kcrrfail: dest:2 err:3113 force:0
ORA-03113: end-of-file on communication channel
Watching the standby listaner log file, it doesnt seem to get that far, so the problem is probably on the primary/outgoing side ....
Can anyone suggest where my problem is ?
Cheers
Ian
Message was edited by:
user553552

Hi
I found a problem on the standby hosts listener.ora
But now I cant really see any errors anywhere, but logs aren't being transferred ....
Standby query "SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;" is giving output:
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
MRP0 WAIT_FOR_LOG 1 187 0 0
RFS RECEIVING 0 0 0 0
primary trace file says:
Connecting to destination LOG_ARCHIVE_DEST_2 standby host 'test9isb'
Attaching RFS server to standby instance at 'test9isb'
Standby database restarted; old mount ID 0x8c27e216 now 0x8c28adf9
Any advice pls ?!?

Similar Messages

Gating error while creating standby database in oracle 11g

Dear Gurus
I am getting following error while creating standby database. My database version is oracle 11g 11.2.0.1 in Redhat 5.2
RMAN> duplicate target database for standby from active database;
Starting Duplicate Db at 10-MAY-12
using channel ORA_AUX_DISK_1
contents of Memory Script:
backup as copy reuse
targetfile '/oracle/product/11.2.0/dbhome_1/dbs/orapworcl' auxiliary format
'/oracle/product/11.2.0/dbhome_1/dbs/orapwstdb' ;
executing Memory Script
Starting backup at 10-MAY-12
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/10/2012 15:44:18
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 05/10/2012 15:44:18
ORA-17629: Cannot connect to the remote database server
ORA-17627: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
ORA-17629: Cannot connect to the remote database server
RMAN>
Regards
Rabi

Hello;
Generally for the connection to work you need to add something like this to the listener.ora file :
(SID_DESC =
    (global_dbname = STANDBY.hostname)
    (ORACLE_HOME = /u01/app/oracle/product/11.2.0.2)
    (sid_name = STANDBY)
)You should stop and start the listener on the Standby after adding this. Also your tnsnames.ora must be correct on both the primary and the Standby.
Also you need an INIT for the Standby side :
STANDBY.__db_cache_size=343932928
STANDBY.__java_pool_size=4194304
STANDBY.__large_pool_size=4194304
STANDBY.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
STANDBY.__pga_aggregate_target=281018368
STANDBY.__sga_target=834666496
STANDBY.__shared_io_pool_size=0
STANDBY.__shared_pool_size=469762048
STANDBY.__streams_pool_size=0
audit_file_dest='/u01/app/oracle/admin/PRIMARY/adump'
audit_trail='db'
compatible='11.2.0.0.0'
control_files='/u01/app/oracle/oradata/PRIMARY/control01.ctl','/u01/app/oracle/oradata/PRIMARY/control02.ctl'
db_block_size=8192
db_domain='SOME.DOMAIN.COM'
db_flashback_retention_target=2880
db_name='PRIMARY'
db_recovery_file_dest_size=2147483648
db_recovery_file_dest='/u01/app/oracle/flash_recovery_area'
diagnostic_dest='/u01/app/oracle'
dispatchers='(PROTOCOL=TCP) (SERVICE=PRIMARYXDB)'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST'
open_cursors=300
pga_aggregate_target=277872640
processes=150
remote_login_passwordfile='EXCLUSIVE'
sga_target=833617920
undo_tablespace='UNDOTBS1'
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=STANDBY'
log_archive_dest_2='SERVICE=PRIMARY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) '
LOG_ARCHIVE_DEST_STATE_1=ENABLE
LOG_ARCHIVE_DEST_STATE_2=DEFER
LOG_ARCHIVE_MAX_PROCESSES=30
FAL_SERVER=STANDBY
STANDBY_FILE_MANAGEMENT=AUTO
DB_UNIQUE_NAME=STANDBYFinally
startup nomount
Start RMAN and issue duplicate command
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;
Keys to success
1. New Standby start NOMOUNT on new password file. ( On Oracle 11 you must copy and rename the file from Primary server )
2. Hard coded listener on new Standby server.
3. Correct tnsnames.ora files.
4. Correct duplicate command.
Please consider closing some of you old answered questions
Best Regards
mseberg
Edited by: mseberg on May 10, 2012 7:06 AM

Error while creating standby database for ebs prod database

Hi,
We are getting error while trying to create a standby database for EBS database by using RMAN DUPLICATE commands,
Steps followed:
1.) Backup the primary database (Ebs PROD db). This was done on 12-Mar-2012
***RMAN backups are scheduled to run @10:00 pm every night. Flash Recovery Area has been configured and backup is taken at this location
everyday.
2.) Tar the backupset, autobackup, archivelogs etc in FRA .... and copy this to the target server (STANDBY).
*** Copy(oracle rdbms binaries and FRA) completed @12:00AM on 14-Mar-2012
3.) Tried to create standby database by using RMAN duplicate on 14-Mar-2012
RMAN> rman sys/sys@PROD auxiliary /
RMAN> duplicate target database for standby dorecover nofilenamecheck;
After, some time the RMAN DUPLICATE process errors out with,
ORA-19563: header validation failed for file
We are not sure about the cause of this error. While searching in Metalink, we got several notes (ex, 352074.1) but all the causes stated for this error
are not applicable in our case. We double checked our instance to confirm this.
We have also found that in PROD database there are 65 datafiles and after the RMAN DUPLICATE errors out in the targer server (STANDBY) the RMAN managed to restore 51 datafiles before erroring out.
# Please note PROD database was also backed up on 13-Mar-2012. We have a suspicion that backup on 13-Mar may be a possible cause for this error but we are
not sure.
Need suggestions if there can be any other possible causes???
We are in a fix and it would be appreciable if we get some quick suggestions..
Regards,
Rupdipt
Edited by: orarup on Mar 14, 2012 12:29 AM

When opening the file to be placed in a copy or backup set, to be inspected, or used as the target for an incremental restore, its header was not recognized as a valid file header for a file of the indicated type (data file, archived log, or control file) belonging to the current database.
Kindly Ensure that the correct files are being specified for the copy or backup operation.
Regs,
Bhavi Savla.

Getting error while creating standby database

I am creating standby database in oracle 10.2 on windows (same machine)and getting following error.Could any one please suggest me on this.
on primary database alert log file
================================================
Error 1031 received logging on to the standby
Fri Jul 17 18:09:23 2009
Errors in file c:\oracle\product\10.2.0\admin\orcl\bdump\orcl_arc0_4512.trc:
ORA-01031: insufficient privileges
PING[ARC0]: Heartbeat failed to connect to standby 'IDR'. Error is 1031.
================================================
my LISTENER file is as below
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = Orcl)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = Orcl)
(SID_DESC =
(GLOBAL_DBNAME = idr)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(SID_NAME = idr)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
and tns file is as below
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
IDR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = Gaurav-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = IDR)
)

recreate the instance at standby database without password file
oradim -new -IDR standby -startmode manual recreate password file at primary database , copy the same password file from primary database to standby database,also make sure primary database started with REMOTE_LOGIN_PASSWORDFILE=EXCLUSIVE parameter.
Check also the primary database is able to tnsping to standby database.
Khurram

Error while creating standby database

Hi,
ORACLE VERSION:10.2.0.1.0
OPERATING SYSTEM:WINDOWS
While i am trying to setup a standby database i am getting the following error in my parameter file.
SQL> startup
ORA-02778: Name given for the log directory is invalid
Here is my pfile
orakill.__db_cache_size=427819008
orakill.__java_pool_size=4194304
orakill.__large_pool_size=4194304
orakill.__shared_pool_size=167772160
orakill.__streams_pool_size=0
*.audit_file_dest='E:\oracle\product\10.2.0/admin/oracle/adump'
*.background_dump_dest='E:\oracle\product\10.2.0/admin/orakill/bdump'
*.compatible='10.2.0.1.0'
*.control_files='F:\orakill/\control01.ctl','F:\orakill/\control02.ctl','F:\oradata/orakill/\control03.ctl'
*.core_dump_dest='E:\oracle\product\10.2.0/admin/orakill/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.DB_FILE_NAME_CONVERT='E:\oracle\product\10.2.0\oradata\oracle','F:\orakill\'
*.DB_NAME='oracle'
#*.db_recovery_file_dest='E:\oracle\product\10.2.0/flash_recovery_area'
*.log_archive_dest='F:\standby\aldump'
*.db_recovery_file_dest_size=2147483648
*.DB_UNIQUE_NAME='orakill'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=oracleXDB)'
*.FAL_CLIENT='orakill'
*.FAL_SERVER='oracle'
*.job_queue_processes=10
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(oracle,orakill)'
*.LOG_ARCHIVE_DEST_1='LOCATION=F:\standby\aldump\ VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=orakill'
*.LOG_ARCHIVE_DEST_2='SERVICE=oracle LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=oracle'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.LOG_FILE_NAME_CONVERT='E:\oracle\product\10.2.0\oradata\oracle','F:\orakill\'
*.open_cursors=300
*.pga_aggregate_target=202375168
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=609222656
*.STANDBY_FILE_MANAGEMENT='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='E:\oracle\product\10.2.0/admin/orakill/udump'
please help me.
Regards,
Poorna.

you seems to have issues with your setting. For instance see the controlfile parameter.
*.control_files='F:\orakill/\control01.ctl','F:\orakill/\control02.ctl','F:\oradata/orakill/\control03.ctl'
also check whatever directory given actually exist in the server.
hth,
http://borndba.com

Error while mounting Standby database

Hi all,
I am getting ORA-01102: cannot mount database in EXCLUSIVE mode error when truying to mount the standby database.
SQL>alter database mount standby database ;
If anyone faced the same issue please guide me.
Thanks and Regards
Salih KM

This is script for Standby..
Primary Server Configuration
1.In the TNSNAMES.ORA of Primary DB add the entry of the Standby DB
IRCSSTDB(This is the service name in Primary DB to connect to Standby DB) =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IRDBACK)(PORT = 1512))
(CONNECT_DATA =
(SERVICE_NAME = IRCS(This is the actual INSTANCE name of Running DB on Standby DB)
2. There is no need to Make any Changes in the Listener.ora of PRIMARY DB
Keep LISTENER.ORA of Primary as it is
Copy Listener.ora from Primary DB to Standby DB and make following changes
Delete All the Extra Existing listeners.
(These Updations are for the STANDBY DB)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IRDBACK)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /ora01/app/oracle/product/9.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = IRCS)
(ORACLE_HOME = /ora01/app/oracle/product/9.2.0))
3.In the INIT.ORA of Primary DB add Following…
log_archive_dest_2 = "service=STBY optional/Mandatory scope=BOTH"
log_archive_dest_2 = Enable
log_archive_min_succeed_dest = 2
We can add this Dynamically with the SQL*PLUS..
Standby DB Server Configuration
1.In the TNSNAMES.ORA of Standby DB add the entry of the Primary DB
primary1(ISSL)(This is the service name in Standby DB to connect to Primary DB)=
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp) (PORT=1521) (HOST=PRIMARY MACHINE NAME))
(CONNECT_DATA=(SERVICE_NAME=IRCS(This is the actual INSTANCE name of Running DB on Primary DB)
2.Copy Listener.ora from Primary DB to Standby DB and make following changes
Same as Above
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IRDBACK)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /ora01/app/oracle/product/9.2.0)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = IRCS)
(ORACLE_HOME = /ora01/app/oracle/product/9.2.0))
3. Connect to Idle instance..
1.C:\ oradim –NEW –SID ircs –INTPWD pwdfilename –STARTMODE auto –pfile E:\oracle\oradata\pfile\init.ora
2.     C:\ set oracle_sid=IRCS
3.     C:\ sqlplus /nolog
4.     SQL:>connect sys/ircl as SYSDBA
5.     SQL:>startup nomount pfile= E:\oracle\oradata\pfile\init.ora
6.     SQL:> alter database mount standby database;
7. SQL :> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE;
4. we can also add these parameter in INIT.ORA of Standby DB
1.standby_archive_dest= /u00/app/oracle/admin/sec/arch (Same path as in
(log_archive_dest_1) in init.ora
2. Fal_client=standby1 (Service Name)
3. Fal_server=primary1 (Service Name)
Troubleshooting….
1. Check Init.ora of Primary DB
2. Try to open Standby Database in normal mode try to connect it with normal user from different Machine.
3.check *.logs file on Standby Database
4.Check v$archive_dest on Primary DB
5. lsnrctl services <listener name>….For Checking Listener, for service

Database Guard enabled error in Logical standby database

Hi All,
In my logical standby db i have a schema REP which is not present in Primary database, but even then i am getting ora-16224 Database Guard enabled error when ever i try DDL and DML operation on REP schema objects in Logical standby db.
even when i compile sys object i am getting the same error. when i set database data guard status to NONE, i don't get error, but my requirement is to keep database data guard status in STANDBY
My database version is 11.2.0.3.0.
Please help in resolving this error.
Thanks,
Mukesh

>In my logical standby db i have a schema REP which is not present in Primary database,
not possible

Error during open standby database in read only mode

hi,
alter database open read only;
alter database open read only
ERROR at line 1:
ORA-10458: standby database requires recovery
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u02/app/oracle/oradata/standby/system01.dbf'
Detailed OCI error val is 12154 and errmsg is 'ORA-12154: TNS:could not resolve the connect identifier specified
what is the reason of this.
Thanks in advance.

thanks for your reply.
[oracle@standby admin]$ cat listener.ora
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.105.1.124)(PORT = 1521))
LISTENER_STANDBY =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.105.1.124)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME =/opt/app/oracle/product/11.2.0/db_1)
(PROGRAM = extproc)
tnsfile
[oracle@standby admin]$ cat tnsnames.ora
standby =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =10.105.1.124)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = standby)
ora11g =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =10.105.1.120)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora11g)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.105.1.120)(PORT = 1521))
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
pfile
[oracle@standby standby]$ cat initstandby.ora
ora11g.__db_cache_size=130023424
ora11g.__java_pool_size=4194304
ora11g.__large_pool_size=4194304
ora11g.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
ora11g.__pga_aggregate_target=146800640
ora11g.__sga_target=276824064
ora11g.__shared_io_pool_size=0
ora11g.__shared_pool_size=121634816
ora11g.__streams_pool_size=8388608
*.audit_file_dest='/u01/app/oracle/admin/ora11g/adump'
*.audit_trail='db'
*.compatible='11.2.0.1.0'
#*.control_files='/u02/app/ora11g/oradata/ora11g/control01.ctl','/u01/app/oracle/flash_recovery_area/ora11g/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='ora11g'
*.db_recovery_file_dest='/opt/app/oracle/flash_recovery_area'
*.db_recovery_file_dest_size=4039114752
*.diagnostic_dest='/opt/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=ora11g)'
*.memory_target=2016M
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
*.audit_file_dest='/opt/app/oracle/admin/standby/adump'
*.audit_trail=none
#*.background_dump_dest='/opt/app/oracle/admin/standby/bdump'
#*.compatible='10.2.0.2.0'
#*.control_files='/opt/app/oracle/oradata/standby/control01.ctl'
#,'/opt/app/oracle/oradata/standby/control02.ctl','/opt/app/oracle/or
*.control_files='/u02/app/oracle/oradata/standby/control_sb01.ctl'
#,'/u02/app/oracle/oradata/standby/control_02.ctl','/u02/app/oracle/oradata/standby/control_03.ctl'
*.core_dump_dest='/u01/app/oracle/diag/rdbms/standby/standby/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
#*.db_name='standby'
#*.dispatchers='(PROTOCOL=TCP) (SERVICE=standby)'
*.job_queue_processes=10
*.log_archive_dest_1='location=/opt/app/oracle/arch'
*.log_archive_config='dg_config=(standby,ora11g)'
*.log_archive_dest_1='LOCATION=/opt/app/oracle/oradata/standby/archivelog'
*.log_archive_dest_2='service=orcl valid_for=(online_logfiles,primary_role) db_unique_name=ora11g'
*.log_archive_format='%t_%s_%r.dbf'
*.standby_file_management=auto
*.db_unique_name =standby
*.fal_server='ora11g'
*.fal_client='standby'
*.service_names='standby'
*.open_cursors=300
*.pga_aggregate_target=525336576
*.processes=1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=1576009728
*.undo_management='AUTO'
*.undo_tablespace='undotbs02'
#*.user_dump_dest='/opt/app/oracle/diag/rdbms/standby/standby/trace'
*.standby_file_management ='manual'
*.instance_name =standby
#*.standby_archive_dest=/opt/app/oracle/oradata/standby/archivelog
*.db_file_name_convert=(/u02/app/ora11g/oradata/ora11g,/u02/app/oracle/oradata/standby)
*.log_file_name_convert='/u02/app/ora11g/oradata/ora11g','/u02/app/oracle/oradata/standby'
#*.remote_listener=LISTENER_ora11g

Error when logical standby database

Hii all,
First time i am creating logical standby database on oracle 10gR2 by oracle doc.
but When i try to create logical standby database it give error
DG 2011-07-11-09:44:24 0 2 755997031 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16797
DG 2011-07-11-09:44:24 0 2 755997031 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16797
DG 2011-07-11-09:45:24 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16797: database is not using a server parameter file.
when i try to create spfile from pfile it give error.
ORA-01078 failure in processing initialization parameters.
LRM-00123 invalid character number found in the input file.
Please help
Vaibhav Dixit.

Vaibhav Dixit wrote:
stan.__db_cache_size=432013312
stan.__java_pool_size=4194304
stan.__large_pool_size=8388608
stan.__shared_pool_size=163577856
stan.__streams_pool_size=0
*.audit_file_dest='D:\oracle\product\10.2.0/admin/stan/adump'
*.background_dump_dest='D:\oracle\product\10.2.0/admin/stan/bdump'
*.compatible='10.2.0.1.0'
*.control_files='D:\oracle\product\10.2.0/oradata/stan/stan05.ctl'
*.core_dump_dest='D:\oracle\product\10.2.0/admin/stan/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='stan'
*.DB_UNIQUE_NAME='stan'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(prim,stan)'
*.DB_FILE_NAME_CONVERT='D:\oracle\product\10.2.0\oradata\prim\','D:\oracle\product\10.2.0\oradata\stan\'
*.LOG_FILE_NAME_CONVERT= ’D:\oracle\product\10.2.0\oradata\prim\’,’D:\oracle\product\10.2.0\oradata\stan\’,'D:\oracle\product\10.2.0\flash_recovery_area\prim\ONLINELOG','D:\oracle\product\10.2.0\flash_recovery_area\stan\ONLINELOG'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_DEST_1= 'LOCATION=D:\oracle\product\10.2.0\flash_recovery_area\stan\ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=stan'
*.LOG_ARCHIVE_DEST_2= 'SERVICE=prim LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=prim'
*.LOG_ARCHIVE_DEST_3= 'LOCATION=D:\oracle\product\10.2.0\flash_recovery_area\STAN2\ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=stan'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_3='ENABLE'
*.REMOTE_LOGIN_PASSWORDFILE='EXCLUSIVE'
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.STANDBY_FILE_MANAGEMENT='AUTO'
*.FAL_SERVER='prim'
*.FAL_CLIENT='stan'
*.db_recovery_file_dest_size=9390363648
*.dispatchers='(protocol=TCP)'
*.job_queue_processes=10
*.nls_territory='INDIA'
*.open_cursors=300
*.pga_aggregate_target=202375168
*.processes=150
*.sga_target=609222656
*.shared_servers=1
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='D:\oracle\product\10.2.0/admin/stan/udump'
*.undo_retention=3600
*.dg_broker_start='TRUE'from
'D:\oracle\product\10.2.0/admin/stan/udump'
please change or replace the forward slash with backward slash in all file locations
to
eg:- 'D:\oracle\product\10.2.0\admin\stan\udump'
and create a spfile from pfile.

Next log sequence to archive in Standby Database (RAC Dataguard Issue)

Hi All,
I just had implemented Data Guard in our server. My primary Database is RAC configured, but it is only single node. The other Instance was removed and converted it to Developement Instance. For the reason I kept the primary as RAC is when I will implement dataguard, my Primary Database is RAC with 7 nodes.
The first test is successful, and I was able to "switchover" from my primary to standby. I failed in the 'FAILOVER" test.
I restore my primary server and redo the setup.
BTW, my standby DB is physical standby.
When I try to switchover again and issue archive log list, below is my output.
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 38
*Next log sequence to archive 0*
Current log sequence 38
SQL> select open_mode, database_role from v$database;
OPEN_MODE DATABASE_ROLE
MOUNTED PHYSICAL STANDBY
===============================================
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 38
*Next log sequence to archive 38*
Current log sequence 38
SQL> select open_mode, database_role from v$database;
OPEN_MODE DATABASE_ROLE
READ WRITE PRIMARY
In my first attempt to switchover before I failed in "FAILOVER" test, I also issue +archive log list+ in both primary and standby database, and if I remember it right, next log sequence on both should be identical. Am I right on this?
Thanks in Advance.
Jay A

Or Am i just overthinking on this?
Is dataguard only looking for the current and oldest log sequence?

How to apply archive in Standby Database?

Hello,
My Database are running in linux plateform. I am seeing that archives which are generating are not copying to standby server & not applying.
Can anybody suggest me how to copy archive from primary database(ASM file system) to standby Database & apply those archives?
Thanks

Hi,
I am having similar problem. The primary logs are shipping on to standby but are not getting applied.
Here are the outputs:
From primary
SQL > select thread#,max(sequence#) from v$archived_log where archived='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 27908
2 28476
3 31643
select max(sequence#) from gv$archived_log;
MAX(SEQUENCE#)
31643
From Standby
SQL > select thread#,max(sequence#) from v$archived_log where applied ='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 26862
2 27580
3 30874
select max(sequence#) from v$archived_log;
MAX(SEQUENCE#)
31643
Any help is appreciated.
Thanks in advance.

Purge archive logs standby database

How can I purge automaticly the archives logs in the standby database?
I have oracle versión 11.2.0.2 with +ASM in solaris.
Thanks.

My bad.
Will update my notes.
This is still there :
Applied Archivelogs Are Not Deleted On Physical Standby Site from Flash Recovery Area [ID 404338.1]
Since you have your DELETION POLICY set correctly you can also run something like this on the Standby :
run {
allocate channel for maintenance device type disk;
delete archivelog until time 'sysdate -5';
}Best Regards
mseberg
Edited by: mseberg on Aug 16, 2012 4:36 AM

Archive log shipping error in Logical standby database

Hi,
We have Primay and logical database configuration both in RAC in Production. both database are in 10.2.0.4.
Everyday we having issue of some archivelog not transfered to logical server around 2AM. I am having good exposure in Logical/Log minor/Goldgendate and can say fal server/client server configuration is correct.
Can you guys please give some input of what can cause this.
Yes we take RMAN backup of both database around 1:30 using control file instead of recovery catalog and I doubt this put lock on control file and cause this issue.
I would be glad of you could help me out in this.
Thanks a lot!
Pradeep
Below is the configuration of archive/fal on both database.
PIP1REP2 is logical database(instance 2) where apply process is running/configured.
Primary server configuration on (PIP11) (same are on other instances).
SQL> sho parameter fal
NAME TYPE VALUE
fal_client string PIP1REP2
fal_server string PIP11
SQL> sho parameter archive
NAME TYPE VALUE
log_archive_dest_1 string LOCATION=+ARCH01
log_archive_dest_2 string SERVICE=pip1rep2 lgwr async
log_archive_dest_state_1 string enable
log_archive_dest_state_2 string ENABLE
llog_archive_local_first boolean TRUE
log_archive_max_processes integer 10
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
remote_archive_enable string true
Logical server configuration
SQL> sho parameter fal
NAME TYPE VALUE
fal_client string PIP1REP
fal_server string pip11, pip12, pip13, pip14, pi
p15
SQL> sho parameter archive
NAME TYPE VALUE
alog_archive_dest_1 string LOCATION=+ARCH01/PIP1REP valid
for=(onlinelogfiles, all_rol
es) db_unique_name=pip1rep
log_archive_dest_2 string LOCATION=+ARCH01/PIP1REP/ARCH_
DEST2_STANDBY_LOGS VALID_FOR=(
STANDBY_LOGFILES,STANDBY_ROLE)
db_unique_name=pip1rep
log_archive_dest_state_1 string enable
log_archive_dest_state_2 string enable
log_archive_local_first boolean TRUE
log_archive_max_processes integer 20
log_archive_min_succeed_dest integer 1
log_archive_trace integer 0
remote_archive_enable string true
standby_archive_dest string +ARCH01

Do you think creating recovery catalog will resolve it?
Yes, I do. (But I do not know for sure)
If it helps when I got to this part I decided to backup either the Primary or the Standby, but not both.
I decided Primary only and documented how to recreate my standby without downtime.
I hope this helps.
regards.

Standby database Error in applying archives

Hi All
Environment:
Oracle 8i
Platform- HP-UX
I have production database on HPUX box and standby database on anothe HPUX box.
I am applying archive to standby everyday manually.
In last week, I have added ney datafile webapp03 in Production database tablespace.
When I apply archive to standby database. It says archive apply sucessfully but give below warning:
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01195: online backup of file 25 needs more recovery to be consistent
ORA-01110: data file 25: '/u06/oradata/vestcom/webapp03.dbf'
Yesterday I have copied datafile from production to standby database.
But still I am getting same warning:
Please let me know in detail, I am totally new in this admin field.
Please help me out for this issue:
Thanks in Advance.
R M

Absolutely. First place the tablespace space in backup mode, then copy over the datafile and then end the backup mode - applying the log files should be fine now.
HTH
Thanks
Chandra

Online Redolog Archiving on Logical Standby Databases!!

Hi,
Can I safely stop archiving on logical standby database? It has been inherited from primary database at the time of creation, but I don't see any reason why to keep it enabled while it's consuming unnecessary disk space on our server!!
Any body can give a valid reason to keep it enabled??
Thanks

hi
u dont need archiving on standby database as standby database reads archive files that come from primary database.its simply wastage of resource.stand by database was created from primary by taking a full backup.and to apply the archive files in case of failure u need atleast 1 backup of stand by database .and i assume u wont go for taking backup of standby database.
just worry about the archives of primary database.
kanchan
OCP ( 9i,10g)

Error archiving to standby database

Similar Messages

Maybe you are looking for