Error at the time of down payment against the PO

Dear friends
I have created a purchase order for Rs.10000 is net and gross amount for Rs.12000 which is including 2000 for taxes etc.
When I am making a down payment request for Rs.12000/- system is throwing an error order value will be exceded. System is allowing me only for Net amount of Rs.10000, beyond that it is not allowing me.
(Here I have changed the warning message to Error message on request of the client, as the down payment against the purchase order should not allow more than Purchase order value.)
Is there any provision to make the down payment on gross payment basis instead of net amount.
Thanks in advance
Kiran A

not answered

Similar Messages

Down payment against the Internal Order - for Capital Expenditure

Dear friends
I am getting an error while making down payment against the purchase order.
The order of my entries or steps are as follows:
Created one internal order for Capital WIP with budget and availability control activation.
Created one purchase order against a vendor with reference to the above Internal Order.
When I am making the down payment to the vendor through tcode:F-48, the system throwing an error
"Define Cost Elements for Down Payments".
Can any one please explain why this error is coming. When I checked in Internal orders, there is a TCode: OKEP for Define Default Cost Elements for Down Payments.
System is asking for cost element, but where as what ever the down payment we are making is nothing but advance which is current asset. Why system is asking for cost element?
Can any one give me the guidance how to handle the issue.
Thanks in Advance
Kiran Kumar A

The reason is when you want the down payment for AUC to be capitalised, then you would need to create cost element for Downpayments.
Normally as per design of SAP, down payment being a Balance Sheet Account (Current Asset as you rightly mentioned) doesnot need / accept an Cost object, as a special case since down payments for AUC needs to be capitalised and hence need to be carried to Controlling (Internal Order) by creating Cost Element for Downpayments.
Go ahead and create the cost element. That would resolve your issue.

How to clear the down payment against the vendor invoice in the payment program?

A down payment is made $25 Later an invoice is posted for $100 Now i want to Pay $75 to Vendor But the Automatic payment program is not clearing the down payment against the vendor invoice. Could you please help how to clear the down payment against the vendor invoice in the payment program?

Swathi,
Need your help i have a strange situation
1) F-48 and document posted with document no = 15..... in company code = L002 with payment block getting populated automatically
2) F-48 and document posted with document no= 15..... in company code = Us11 without payment block and the screen does not even show payment block, I had to check this from BSEG table
My question is
a) How and where does this payment block is triggered through configured and how to process next steps.
b) when I use F-48, how do we do the actual payment, is there a check printing and linking it to the KZ document or is check printing done outside the system and the KZ document type does not have any linkage.
c) If I do FB60 for a higher amount how do we pay partial amount.
Your response is appreciated.

TDS line item not generated at the time of down payment vide F-48

Dear Friends,
Uptill 2008 the system i.e. SAP ECC5 was properly generating tds line items at the time of making down payment.From Feb I,2009 suddenly noticed that no tds line items are generated at the time of making down payment to vendors.Inspite of my hard efforts I am unable to crack this problem.
Any suggestions/solutions is highly solicited.
Best Regards
Monoj
Edited by: MONOJ SARKER on May 4, 2009 5:57 PM

Hi Friends,
Tax type along with tax codes for invioce posting and only tax type for payment postings are updated in the vendor master.At the time of advance payment when the screen pops up for updating tax code at that point tax code for payment postings are updated.
For your in formation I would like to say uptill 2008 there was no problem in withholding tax.The problem started in early 2009.The configuration which existed during 2008 remains unchanged.Its not clear why I am unable to generate TDS line item during advance payment .
Regards
Monoj

Regarding Tds at the time of down payment

Hi All,
At the time of down payment we are deducting the TDS for the vendor,
and at the time of invoice we are deducting TDS only to the extent of the balance amount outstanding (invoice amt - downpayment amt).
After this we are clearing the downpayment made to the invoice raised with trax. F-54.
when we are making outgoing payment to the vendor, the TDS amount which is deducted at the time of Down payment is also being debited (here the down payment amount is fully credited and the TDS amount at the time of downpayment is getting debited).
Any how the amount is correct but there will be a open item created in the TDS account and at the time of making payment to the bank for TDS this will come as a open item (j1inchln).
This will create unnecessary balance in the GL accounts.
Please Advice what to be done.
Regards

payment related all tax types deselect the radio button of central invoice prop. and select No central inv. under central invoice tab
then it will not reverse the tds entries at the time of f-53/f-58
assign points if useful
Edited by: Sai Krishna Vallurupalli on Jul 1, 2008 1:05 PM

Vendor service tax at the time of down payment

Hi sap Guru's
Service Tax payable on Vendor Advances at the time of down payment.
Requirement: New tax code X5 need to create with CST@5% on 80% of Bill value and service Tax @12.36% on 70% of Bill value. While calculating the CST amount, system should take the base value by excluding the service tax amount.
I had created the requirement and at the time of posting in F-43
The service tax calculating.
But when i am posting in F-48 the tax is not calculating. What is the reason
For down payment f-48 i need to make any configuration, or need to maintain anywhere the tax code x5
Please advice me why at the time of down payment F-48 the tax is not picking.
Thanks & Regards,
Ramesh

Thanks you very much for your reply sudhir,
If i select ,"Posting without tax allowed" check box why the system is not going to calculate the tax
And in recon account should i maintain G067. or any else.
Thanks,
Ramesh

Reg., Quality Inspection at the time of Goods Receipt against the P.O.

Hi
Pls provide the procedure for the "Quality Inspection at the time of Goods Receipt against the P.O."
Thanks in advance.
Regards
Ravi

Answers:
1.Our client wants that he want to send back to Vendor, In which way we have to do in SAP?
In QM,Raise notification for rejected qty in special stock, this will carry task of return delivery.
2. Without Quality inspection User shouldn't do the MIRO?
User discipline only it will be solved or
Prepare user exit with help of ABAP'r
while goods receipt(MIGO) for all scenarios(under delivery/over delivery/rejected) in development,
Check MIRO for QC passed qty is allowed for bill booking, give meaningful messages for all scenarios.
3. Quantity was certified by 13 only, so the user should do the MIRO for 13 only, Kindly suggest iIn which way we have to configure in SAP?
Do return delivery for rejected quantity(2),if there excise,reverse it thru J1IS.
After finishing above steps,Wheu u do IV only Quantity 13 will flow.
Invoice verification will be done only for the accepted quantity.
Above solution will solve problem.
Edited by: Jeyakanthan A on Jan 11, 2010 12:01 PM
Edited by: Jeyakanthan A on Jan 11, 2010 12:02 PM

How TDS Reverse at the time of Down Payment Clearing F54

Dear Friends,
Please let me know what is the process or configuration we have to do for clear TDS in F-54.
my scenario is I made down payment of Rs. 10000/- with TDS.
next we are doing MIRO for Rs. 50000/- with TDS full amount
Then I m adjusting down payment against Invoice no. which I deduct TDS for Rs. 10000/-in F-54
in this transaction TDS should be reverse for Rs.10000/-
I checked tax type for payment as central invoice processing. but it is also not working.
Please anyone know regarding this issue let me know.
Thanks in Advance.
JD

Hi,
After MIRO posting, please note the following method :
F-54 - Enter all the header data details, Vendor Code, Enter the relevant Document (Invoice) No.which you need to adjust with Down Payment (10000) made.
Select to Process down payments
The next screen shows the down payment document no. and it shows amount & available amount by line item wise.      Amount & available column shows as 10000.
Select the relevant down payment line item and double click in the last tab "Transfer Posting"
This tab shows the final amount (after adjusting down payment).
Go to left side corner and through pull down menu select "document" and "simulate"
The document shows the overview of the reversal entry for the relevant down payment with TDS amount.
Please ensure that the tax line items display.
If you are not getting the tax line items overview, go to document and select "simulate" once again.
Finally, the document display all the line items including tax line items with blue colour.
Double click relevant line item and enter your text "Adv adjusted for doc ref......"
Simulate and post.
Result:
Then you check through FBL1N for the relevant vendor, the open item shows only 40000 after adjusting the down payment.
The cleared line item shows both down payment as well as cleared payments.
Hope that it may useful.   If you are getting any error, please give the details.
Regards
G Bhaskaran

Issue at the time of Down payment

Dear friends
I created one Down payment request for Rs.10000/- in F-47.
When I am making the Down payment through F-48, system is allowing more than Rs.10000/- against the above Down payment request.
Is there any control or any note to apply or any config to be done to restrict the Down payment not be more than Rs.10000/- of Down payment request made.
Thanks in advance
Kiran

Hi,
u check with the customising of downpayment for vendor OBXR and for customer OBYR.

Down Payment against PO - Urgent

Hi,
I am MM consultant my issue
When user entering down payment in F-47
for a purchase oder the system is allowing the amount more than PO amount which is logically incorrect.How can I prevent this ?
Regards,
Chetan.

Hi,
At the time of down payment system will not validate the PO amount. At the time of payment against vendor invoice system automatically set off the balance amount to the vendor account
For Eg.: If you pay down payment more than PO amount and you posted an invoice against a PO at the time payment run system will posts a credit memo against a Vedor
OR
If you have posted a down payment less than the PO amount at the time of payment run system deduct the down payment from the toal invoice amount and it creates a clearing document for the balance amount
Hope this will helps. If it helps award me points
Cheers
Umakanth

Down payment against Asset

Dear Friends,
we are using SAP ECC 6,
Currently, there is no config, for Advance against Asset,
we maintain below configuration --- (Development Server)
             Financial Accounting (New)
                             Asset Accounting
                                       Transactions
                                                   Acquisitions
                                                              1) Assign Accounts - Maintain GLs
                                                              & 2) Allow Down Payment Transaction Types in Asset Classes-                                                                     maintain all asset class
even though there is error in Purchase order for down payment against Assets.
Please guide me.
any more config ?
thanks
Jitendra K. Surana

sorry !
i am on leave, unable to reply you,
thanks for response, error is as below
Account 140400 in company code 1400 cannot be directly posted to
Message no. F5354
DiagnosisAccount "140400" in company code "1400" is marked as a reconciliation account for account type "K" and cannot therefore be directly posted to.
System Response
Error
Procedure
Select a different account
thanks
regards
jitendra K. surana.

Down payment against assets

hi
how to do down payments against the asset acquisitions

hii
You can create new special G/l indicator for advance agt capital acquistion but the entry for advance will be done in F-48 Only.
Regards,
Aakash

Settlement of the Final Balance Payment against the Down Payment Request

Hi,
How can I settle the Final Balance of a Vendor in SAP against the Down Payment Made under a PO Based Invoice. For Eg. - I have raised a PO of $10000.00 and made a Down Payment Request and Posted it through the APP for $ 300.00 the final balance under the FBL1N displays as $ 9700-, but the ZP Doc Types for Vendor Payment of Down Payment also appear in the Open Items and Status shown is in RED Colour and not in GREEN Colour and does not appears under the Cleared Items. Under the Cleared Items I am able to view the Original Down Payment Requests which I posted through Transaction F-47.
I am unable to settle this Final Balance of $9700 against the Down Payment under the Vendor Account on the basis of a PO Based Invoice.
Can some one please help me urgently on this.
Thanks in Advance.
Regards,
Pankaj.

Dear,
The same requirements possible after implement EHP4 Package upgrade.
Regards,
Kishore

Regarding Down Payment against Asset purchase

Hi SAP GURU
i have one queries regarding down payment made against asset puchase order
I created one asset code, create the PO with accoun assignment categories A, made a advance payment against reference to this PO no .
Now the problem is , asset capitalised date is automaticaly come same as down payment date and it is reflecting in asset explorer , T code - AW01N.
Can any body suggest what is the right way for the whole scenarion , or i am making some mistake .
Is there any config setting i am missing.
Please help me out , issue is very critical.
Thanks in advance.
Regards
Anjan

Hi Anjan,
From your below query, I infer that you have created asset PO and made down payment against PO without goods and invoice receipt. Am I right?
Are you following Valuated goods receipt or non valuated goods receipt concept?
Valuated goods receipt: Asset will be debited at the time of goods receipt
Non valuated good receipt: Asset will be debited at the time of invoice receipt
If you follow valuated goods receipt concept, then at the time of making down payment, asset should not be debited (whatever the value date/ capitalization date be). Please refer SAP note number 310368 (valuated goods receipt paragraph) for reference. In that they have clearly mentioned the steps to make down payment against asset PO without debiting to asset and without any error message. You have to make F5 378 message number from error message to warning message and in posting key 29 and 39, you have to supress the asset related fields. If you have done the above settings, then system will not show any error message to update G/L account in AO90 transaction code for the Acquisition: down payments and Down payment clearing - 2nd and 4th field.
Here we are following the valudated goods receipt and initially I faced the same issue and we sorted out after following the steps mentioned in the above sap note number.
Hope this helps. Assign points if useful.
Regards
Dwarak.

Down payment against Purchase order

Hi SAP GURU
i have one queries regarding down payment made against asset puchase order
I created one asset code, create the PO with accoun assignment categories A, made a advance payment against reference to this PO no .
when i enter the po number in purchase document field, immediatly asset number coming and showing error message
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class 9000 (chart of depreciation SHV). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
Can any body suggest what is the right way for the whole scenarion , or i am making some mistake .
points will be awarded for useful answers
with regards
sai krishna

last week i also faced this problem.
Please refer sap note number 310368 valuated goods receipt paragraph and they have clearly mentioned about making down payments against asset purchase order without getting debited to asset account.
You have to make F5 378 message number to be a warning message instead of error message and you have to suppress asset related settings in OB41 posting keys 29 and 39. Posting key 39 is useful when you have down payment request.
If you have done this, then it will show only warning message during down payment that "purchase order is related to asset" and it will not be debited to asset account. Also after following the above steps, it is not necessary for you to give Acquisition: down payments G/L and Down payment clearing G/L in AO90 transaction code.

Error at the time of down payment against the PO

Similar Messages

Maybe you are looking for