Error building
I created a dvd using only slideshows and menus. and last night it burned to disc properly and built fine. Now I get an error ,essage regaring one image in a slide show. I do not think I changed anything. I mean it did not woek last night, but at least it burnt. Heres the message. What do you think?
compiler
arch ,DSC_0659.tif:Marker position in movie not at GOP boundary
Quick fix: open the Preferences/Track settings and choose the option "Fix Invalid markers on Build".
Alternatively, you could try converting the slideshow to a track and locate the maker that is out of position in the track.
-k
G5 Mac OS X (10.4.4)
Similar Messages
-
Error building gnomad2, missing libraries?
Hello!
Im trying to build the new version of gnomad2, which is a GTK based app for interacting with the Creative zen jukebox I have. I have been using version 2.6.3 for a while, and today they released a new version, 2.7.0. I have build the previous versions of gnomad2 without problems, but when I try to build the 2.7.0, make fails:
gnomad2.c: In function `scan_jukebox':
gnomad2.c:264: error: `GNOME_STOCK_BUTTON_CANCEL' undeclared (first use in this function)
gnomad2.c:264: error: (Each undeclared identifier is reported only once
gnomad2.c:264: error: for each function it appears in.)
gnomad2.c:265: warning: assignment makes pointer from integer without a cast
gnomad2.c:270: error: invalid type argument of `->'
gnomad2.c:274: error: invalid type argument of `->'
gnomad2.c: In function `set_jukeboxowner_dialog':
gnomad2.c:311: error: `GNOME_STOCK_BUTTON_OK' undeclared (first use in this function)
gnomad2.c:312: error: `GNOME_STOCK_BUTTON_CANCEL' undeclared (first use in this function)
gnomad2.c:313: warning: assignment makes pointer from integer without a cast
gnomad2.c:324: error: invalid type argument of `->'
gnomad2.c:330: error: invalid type argument of `->'
gnomad2.c: In function `main':
gnomad2.c:360: error: `GnomeProgram' undeclared (first use in this function)
gnomad2.c:360: error: `gnomad' undeclared (first use in this function)
gnomad2.c:389: error: `LIBGNOMEUI_MODULE' undeclared (first use in this function)
gnomad2.c:390: error: `GNOME_PARAM_POPT_TABLE' undeclared (first use in this function)
gnomad2.c:391: error: `GNOME_PROGRAM_STANDARD_PROPERTIES' undeclared (first use in this function)
gnomad2.c:413: warning: assignment makes pointer from integer without a cast
make[1]: *** [gnomad2.o] Error 1
make[1]: Leaving directory `/home/krigun/downloads/gnomad2/src/gnomad2-2.7.0/src'
make: *** [all-recursive] Error 1
==> ERROR: Build Failed. Aborting...
I have checked, I have all the dependecies listed below, but I do not have Gnome installed, I only use KDE.
Gnomad dependencies:
Gnomad +
|
+- GTK+-2.0 (incl GDK, GLIB)
|
+- libgnomeui
|
+- libnjb +
| |
| +- libusb (optional on *BSD)
|
+- libid3tag
|
+- GNOME 2.0
and the PKGBUILD:
pkgname=gnomad2
pkgver=2.7.0
pkgrel=1
pkgdesc="gnomad2"
license="GPL"
depends=('libnjb')
source=($pkgname-$pkgver.tar.gz)
#md5sums=('84d738840d7bc56a468f53444a0ec206')
build() {
cd $startdir/src/$pkgname-$pkgver
./configure --prefix=/usr/bin
make || return 1
make DESTDIR=$startdir/pkg install
Does anybody know what these errors are about? Im not too familiar with the Gnome libraries.. Do I have to install Gnome to be able to make the package?you want add this into pacmans path
Server = ftp://ftp.archlinux.org/tur/hapy
then
pacman -S gnomad2
its so much easier
but if your current like if you ran pacman -Suy after oct 1 i belive
then it probably wont work
mine did till the new upgrades
ive not been able to build it from source like your doing ive tried many times
i read some where in the read me files bout jsut adding modprobe njbfs then mount it like
a mass storage device im gonna try looking into that today
i also posted ? to the forum on this -
Hi Gurus,
I am trying to create a simple synchronous BPEL process from which I am invoking a external webservice deployed on a local oc4j container in my laptop.My external webservice operation takes a complex type as input and returns a complex type as output.I have created a partner link for my external webservice and an invoke activity for the calling the partner link.
When I try to expand the Input/Output variables created for the invoke activity,I get the following error
Error building schema
Exception: Connection timed out: connect
I have the correct proxy settings in my JDeveloper and I am able to access my webservice port from my browser.Please let me know where I am going wrong.
Thanks In Advance,
PrasannaHi, just a try:
"In obsetenv.bat you can specify the proxy to be used for outbound soap/http.
Make sure it is set if there is a proxy between the bpel server and the webservice you are trying to call."
In case it works: Thanks to Mark :-)
Regards,
Hansi -
Error building stand alone applicatio​n, with LV.7.01
Hi to all....
I always get this pop up error (see picture attached) when trying to build a Stand alone application. I got the full version of Labview 7.01 and the Application builder also. the runtime engine is also 7.01.
Regards
HFZ.
HFZ
Solved!
Go to Solution.
Attachments:
Error Building App.JPG 51 KBHi GardW
All comm. problem are handeled.
The problem was based on the destinations for the .VI's.
Labview 7.1 isn't so got to manage these. It's something the user got to be carefully about.
Allmost solved. But now can't get the default 'labview Icon' to my finnished Application. You know... when you make a stand alone application..
then somewhere under the building process... you can choose if you want your own Icon added as the application starter icon! If you don't choose any.. Labview makes the Labview Icon as your application starter Icon.
And that is my problem now. Any ideas???
Thanks for trying to help , i appriceate it !!
Regards HFZ
HFZ -
Bonjour à tous,
Lorsque je terminais ma semaine hier, j'ai voulu réaliser un dernier test sur un Touch Panel, mais lorsque j'ai voulu construire l'executable sous Labview 2009, celui ci m'a affiché cette erreur :
Error building executable. Unable to create file
Quelqu'un saurait d'où vient cette erreur et comment la corriger? Elle est apparue comme ça sans réels changements du code, ce qui d'autant plus étrange!!
Merci pour vos réponses!J'ai ce type d'erreur de temps en temps, pour moi dans 50% des cas, il suffit de quitter LabVIEW, de ré-ouvrir le projet, relancer le build et ça marche.
Sinon il faut que tu donnes plus de détails...
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!" -
Error building content paths on Primaries - java error
I am on v10.3.3 (Sles Primes) and I am receiving this error in servers-meesages.log:
[DEBUG] [12/19/11 2:40:46 PM] [] [Content Web Service] [] [getContentInfoEx: Error building content paths for ca4dde135b3d0c4d699a2722d0d49d6
[DEBUG] [12/19/11 2:40:46 PM] [] [Content Web Service] [] [java.lang.ArrayIndexOutOfBoundsException
[DEBUG] [12/19/11 2:40:47 PM] [] [Content Web Service] [] [getContentInfoEx: Error building content paths for 56d095d31efaad80f26e51cc02f9294
[DEBUG] [12/19/11 2:40:47 PM] [] [Content Web Service] [] [java.lang.ArrayIndexOutOfBoundsException
[DEBUG] [12/19/11 2:40:47 PM] [] [Content Web Service] [] [getContentInfoEx: Error building content paths for 7549fb68f8256e3ffdd1380c5b4ebc6
[DEBUG] [12/19/11 2:40:47 PM] [] [Content Web Service] [] [java.lang.ArrayIndexOutOfBoundsException
This is causing the workstations to hang upon registering. Once they reboot and receive their Closest Server rules the situation improves (still slow).
[DEBUG] [12/19/2011 13:36:45.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [FindNextContent: Sleeping 3000 ms] [] []
[DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [FindFirstContent()] [] []
[DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ ] [] []
[DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ ] [] []
[DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ Found host lx147.company.net status: Busy] [] []
[DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ Skipping IP address 10.74.5.147, status Busy] [] []
[DEBUG] [12/19/2011 13:36:48.843] [1788] [ZenworksWindowsService] [41] [] [ConnectMan] [] [ Found host 10.74.5.147 status: Busy] [] []
Has anyone seen this? Please help.pcwoodring,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Error building xombrero 1.6.3-1
Hi,
I'm trying to build xombrero 1.6.3.-1 from AUR:
https://aur.archlinux.org/packages/xombrero/
I'm getting the following error building the package:
$ makepkg -s
==> Making package: xombrero 1.6.3-1 (Fri Oct 11 09:51:42 CEST 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found xombrero-1.6.3.tgz
-> Found LICENSE
==> Validating source files with md5sums...
xombrero-1.6.3.tgz ... Passed
LICENSE ... Passed
==> Extracting sources...
-> Extracting xombrero-1.6.3.tgz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
~/builds/xombrero/src/build-gtk2/xombrero-1.6.3 ~/builds/xombrero/src
make: Entering directory `/home/rodrigo/builds/xombrero/src/build-gtk2/xombrero-1.6.3/linux'
perl ../js-merge-helper.pl ../hinting.js ../input-focus.js \
../autoscroll.js > javascript.h
nroff -c -Tascii -mandoc ../xombrero.1 | \
perl ../ascii2txt.pl | \
perl ../txt2tooltip.pl > tooltip.h
Generating ../about.o.depend
In file included from ../about.c:23:0:
../xombrero.h:296:25: error: missing binary operator before token "("
#if WEBKIT_CHECK_VERSION(1, 5, 0)
^
../about.c:1983:23: error: missing binary operator before token "("
#if GLIB_CHECK_VERSION(2, 32, 0)
^
cc -D_FORTIFY_SOURCE=2 -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -I/usr/include/gtk-2.0 -O2 -Wall -ggdb3 -D_GNU_SOURCE -I. -I.. -o ../about.o -c ../about.c
In file included from /usr/include/gtk-2.0/gdk/gdk.h:32:0,
from /usr/include/gtk-2.0/gtk/gtk.h:32,
from ../xombrero.h:94,
from ../about.c:23:
/usr/include/gtk-2.0/gdk/gdkapplaunchcontext.h:30:21: fatal error: gio/gio.h: No such file or directory
#include <gio/gio.h>
^
compilation terminated.
make: *** [../about.o] Error 1
make: Leaving directory `/home/rodrigo/builds/xombrero/src/build-gtk2/xombrero-1.6.3/linux'
==> ERROR: A failure occurred in build().
Aborting...
I don't know what I'm missing. I was able to build xombrero last week in another PC with arch. My current system is upgraded:
Linux 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:40:32 CEST 2013 i686 GNU/Linux
I though that installing thg gnutls library would solve the problem, but unfortunately the error persists after gnutls installation
$ pacman -Ss gnutls
extra/gnutls 3.2.4-1 [Installiert]
A library which provides a secure layer over a reliable transport layer
extra/libtasn1 3.3-1 [Installiert]
The ASN.1 library used in GNUTLS
community/python2-gnutls 1.2.4-2
Python wrapper for the GNUTLS library
Thanks in advance
Last edited by cortezthekiller (2013-10-11 08:35:05)I've edit the former post to write the error messages in English.
Yes, glib2 is installed, as well as the dependencies mentioned in the aur:
desktop-file-utils
libbsd
webkitgtk3
It seems that the updated PKGBUILD in the comments is just aimed to create two sepparate packages for xombrero & xombrero3. I'll try it, but I don't think this will fix my problem. As a said, I was able to build xombrero in another Pc a few days ago. -
"error building executble. unable to create file."
Hello!
When I try to run or Build an Pocket PC application i get thes message: "error building executble. unable to create file."
I have installed:
LAbview 8
Microsoft embedded visual c++ 4.0
Microsoft Pocket PC SDK
PDA Module 8
Does anyone have a clue wats wrong?The builder is missing the C compiler and the linker from Microsoft for the emulator target.
On my system they are located in C:\Program Files\Microsoft eMbedded C++ 4.0\EVC\wce420\bin. Check on your computer.
I couldn't find a place where to set this path (remember: I have 7.1, 8.0 may support this settings, although it's not likely).
Paolo
Paolo
LV 7.0, 7.1, 8.0.1, 2011 -
Error building PKG grub-reiser4
helo,
I have this error building makepkg in grub-reiser4 aur package
makepkg
./PKGBUILD: line 12: syntax error near unexpected token `)'
./PKGBUILD: line 12: ` '4876f193005df5fca8ca9647729d1e23')'
==> Making package: grub 0.97-2 (Sun Dec 10 08:48:50 CET 2006)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Using local copy of grub-0.97-reiser4-20050808.tar.gz
==> Found menu.lst in build dir
==> Found install-grub in build dir
==> WARNING: MD5sums are missing or incomplete. Cannot verify source integrity.
==> Extracting Sources...
==> tar --use-compress-program=gzip -xf grub-0.97-reiser4-20050808.tar.gz
==> Starting build()...
/usr/bin/makepkg: line 637: build: command not found
==> ERROR: Build Failed. Aborting...
what is ?
thankyouthankyou and sorry for my error
but when installed I run:
grub-install /dev/hda
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ]
grub> root (hd1,4)
Filesystem type is reiserfs, partition type 0x83
grub> setup --stage2=/boot/grub/stage2 --prefix=/boot/grub (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/reiserfs_stage1_5" exists... yes
Running "embed /boot/grub/reiserfs_stage1_5 (hd0)"... 18 sectors are embedded.
succeeded
Running "install --stage2=/boot/grub/stage2 /boot/grub/stage1 d (hd0) (hd0)1+18 p (hd1,4)/boot/grub/stage /boot/grub/menu.lst"... failed
Error 15: File not found
grub> quit
this I view in my /boot/grub
default iso9660_stage1_5 minix_stage1_5 stage2_eltorito
device.map jfs_stage1_5 reiser4_stage1_5 ufs2_stage1_5
e2fs_stage1_5 menu.lst reiserfs_stage1_5 vstafs_stage1_5
fat_stage1_5 menu.lst.old stage1 xfs_stage1_5
ffs_stage1_5 menu.lst.pacnew stage2 -
Error building a DC.
I have a DC named "ext_xl" which is of type "External Library".
I copied 3 Jar files:- Jexcel-install.jar, Jexcel.jar, jxl.jar into the library folder of this DC. Further I created two Public parts one for API and the other for SDA named:
1. XL_API_PP
2. XL_SDA_PP
I built this DC "ext_xl".
I have a report DC (cdts_ab) and a selection screen DC (sel_ab). The selection component in the Selectionscreen DC is used in the report DC via Used DC.
When I add the above mentioned PP "XL_API_PP" to the Used DC part of "cdts_ab" and try to buid it, it gives me following error log:
26-Aug-2006 10:37:46 /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: cdts_ab: Build failed for com.rel/cdts_ab(MyComponents) in variant "default": [Error] Generation failed!
Build log -
Development Component Build (2006-08-26 10:37:39)
Component name: cdts_ab
Component vendor: com.rel
SC compartment: MyComponents
Configuration: LocalDevelopment
Location: local
Source code location: Administrator@infpw01589
DC root folder: C:\Documents and Settings\Administrator\.dtc\LocalDevelopment\DCs\com.rel\cdts_ab\_comp\
DC type: Web Dynpro
Host: infpw01589
DC Model check:
[dcmake] All used DCs are available locally
[dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/cmi"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/ddicruntime"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/ddic/metamodel/content"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/wd/webdynpro"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/logging"
[dcmake] validating dependency to public part "default" of DC "sap.com/tc/wdp/metamodel/content"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.aii.util.misc"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.exception"
[dcmake] validating dependency to public part "default" of DC "sap.com/com.sap.mw.jco"
[dcmake] validating dependency to public part "SelectOptionComp_PP" of DC "com.rel/sel_ab"
[dcmake] validating dependency to public part "SelectOptionTypes_PP" of DC "com.rel/sel_ab"
[dcmake] validating dependency to public part "XL_API_PP" of DC "com.ash/ext_xl"
[dcmake] DC model check OK
Start build plugin:
[dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
[dcmake] starting build plugin from : C:\Program Files\SAP\JDT\eclipse\plugins\com.sap.tc.ap\comp\SAP_BUILDT\DCs\sap.com\tc\bi\bp\webDynpro\_comp\gen\default\public\webDynpro\
[wdgen] [Info] Generating configuration/Components/com.rel.cmet.components.contdailytscomp.ContDailyReptComp/ContDailyReptComp.xml
[System.err] [Invoked from com.sap.ide.generationfwk.task.GenerationTaskJavaMethod.executePersistent(GenerationTaskJavaMethod.java:153)]
[System.err] com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Failed to parse XML document containing MRO=com.rel.cmet.components.seloptcomp.SelectOptionsComp.
[System.err] at com.sap.tc.webdynpro.repository.xml.XMLLayerDataParserWriter.startParsing(XMLLayerDataParserWriter.java:190)
[System.err] at com.sap.tc.webdynpro.repository.xml.XMLPersistence.readRepositoryObject(XMLPersistence.java:331)
(ProgmodelRepositoryGenerator.java:297)
[wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
[wdgen] ERROR: Generation failed due to errors (4 seconds)
Ant runtime 6.266 seconds
Ant build finished with ERRORS
[Error] Generation failed!
Error: Build stopped due to an error: [Error] Generation failed!
Build plugin finished at 2006-08-26 10:37:46 GMT
Total build plugin runtime: 6.781 seconds
Build finished with ERROR
Message was edited by: Ashwin BhatCould not find a solution. Built new dc.
-
Error build-impl.xml:577:
i using netbeans 6.8 and while running my program an error "build-impl.xml:577: The module has not been deployed" occured . my web.xml file is shown below
<?xml version="1.0" encoding="UTF-8"?>
<web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd">
<context-param>
<param-name>no</param-name>
<param-value>100203231982381</param-value>
</context-param>
<servlet>
<servlet-name>servlet1</servlet-name>
<servlet-class>servlet1</servlet-class>
</servlet>
<servlet>
<servlet-name>listener</servlet-name>
<servlet-class>listener</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>servlet1</servlet-name>
<url-pattern>/s1</url-pattern>
</servlet-mapping>
<servlet-mapping>
<servlet-name>listener</servlet-name>
<url-pattern>/l1</url-pattern>
</servlet-mapping>
<listener>
<listener-class>listener</listener-class>
</listener>
<session-config>
<session-timeout>
30
</session-timeout>
</session-config>
</web-app>i m trying to use context parameter in my servlets there are two servlets one is listener.java which implements ServletContextListener another is servlet1.java i dont undertand the error everything is fine in both the files plz help meThe <servlet-class> tag should contain the fully qualified name of the Servlet eg "com.something.Servlet1"
If they are in the default package you may want to move them to avoid any unexpected behaviour - link explains:
http://faq.javaranch.com/java/PackageYourBeans
m -
Solaris adapter: Error building user.
Hello!
We are using our IDM to manage users in Solaris Zones. This worked fine, but after moving some zones to a new system, the IDM says it does not find the users any more. When I do a "Accounts / Load from resource", I get the following error for many users:
Error extracting account 'nobody': com.waveset.adapter.exception.ContinuableIteratorException: Error building user.Does anyone know how to fix this error?
TIA
StephanProblem solved: I forgot to change the profile for the user which changes accounts on the system. After editing /etc/user_attr all works fine now.
-
Ping TPowa: Error Building kdelibs-3.5.7 at dnssd stage
I am trying to rebuild kdelibs using makepkg, but I get the following error when it tries to compile dnssd
Making all in dnssd
make[2]: Entering directory `/var/abs/extra/kde/kdelibs/src/kdelibs-3.5.7/dnssd'
/bin/sh ./config.status --recheck
/bin/sh: ./config.status: No such file or directory
make[2]: *** [config.status] Error 127
make[2]: Leaving directory `/var/abs/extra/kde/kdelibs/src/kdelibs-3.5.7/dnssd'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/var/abs/extra/kde/kdelibs/src/kdelibs-3.5.7'
make: *** [all] Error 2
==> ERROR: Build Failed. Aborting...
I see that in the PKGBUILD, we are trying to replace the default kde dnssd with kdnssd-avahi. See here
# Replace dns-sd implementation with avahi implementation
rm dnssd/*
cp -r ${startdir}/src/kdnssd-avahi-20060319/* dnssd/
rm dnssd/configure{,.in}
sed -i -e 's/kdnssd-avahi/dnssd/g' dnssd/configure.in.in
sed -i -e 's|ksocketaddress\.h|network/ksocketaddress\.h|' dnssd/publicservice.cpp
#Needed for updated kdnssd-avahi and inotify patch
I must be missing something, or maybe this is a bug in kdleibs. tpowa is listed as the maintainer, so maybe he will see this and can comment.Nevermind. I built the package as root and all seems to be working. Although, aren't we supposed to able to rebuild every package as a user?
-
Hi,
When we build the test task in BPEL Process, it give error as
[bpeltest] <Line 39, Column 173>: XML-22016: (Error) Extension function namespa
ce should start with 'http://www.oracle.com/XSL/Transform/java/'.
Even then it displays a message as
[echo]
[echo] --------------------------------------------------------------
[echo] Executed 1 test(s) for DistributionManager (v.1.0) with 0 failure(s)
[echo] --------------------------------------------------------------
[echo]
When we check the DistributionManager.properties files
test.total.count=1
test.failure.count=0
When it tries to generate the Test Report, we get the following error,
BUILD FAILED
D:\FCE\Project\07-12-07\ManagedProductProcess\DistributionManager\build.xml:200:
Could not find a valid processor version implementation from oracle.xml.jaxp.JX
SAXTransformerFactory
There are no file generated with in the DistributionManager\xml\DistributionManager folder. (DistributionManager is the Project Name and same is provided for Test Suite Name).
TESTS-TestSuites.xml generated with in
<?xml version="1.0" encoding="UTF-8" ?>
<testsuites></testsuites>
We are in critical situation for delivery, Can you help us to resolve this immediately ?
Action taken:
1. Downloaded the xalan-j_2_7_1
2. Included all jar files of xalan-j_2_7_1 to ClassPath (this process didn't helped us for the deployment)
3. Copied the xalan-j_2_7_1 jar files to C:\product\10.1.3.1\OracleAS_1\j2ee\home\lib (this process didn't helped us for the deployment)Hi,
Try to put this lib in applib directory. Restart your oc4j.
Afonso -
CommonSearchParseException: Error building query, common name {0} specified
Hi,
I have installed Content Server and I have setup CIS on Oracle OC4J standalone. I have also validated the configuration by the action "Validate communication with Oracle Content Server".
I tried to execute the sample program CommonSearch from SDK.
The program is taking a default query as "$author <substring> 'Adm'" and default metadata map from /resources/ucpmcommon-metamap-default.xml ]
But I got the following error:
CommonSearchParseException: Error building query, common name {0} specified but is not mapped.
at com.stellent.cis.client.command.impl.services.CommandExecutorService.executeCommand(CommandExecutorService.java:62)
at com.stellent.cis.client.command.impl.CommandFacade.executeCommand(CommandFacade.java:158)
at com.stellent.cis.client.command.impl.BaseCommandAPI.invokeCommand(BaseCommandAPI.java:84)
at com.stellent.cis.client.api.common.search.impl.CISSearchAPI.search(CISSearchAPI.java:59)
at com.stellent.cis.sdk.samples.search.CommonSearch.execute(CommonSearch.java:78)
I have configured the adapterconfig.xml matching the CIS adapter config in OC4J as given below:
<?xml version="1.0" ?>
<config>
<adapter type="scs" default="true" name="myadapter">
<config>
<property name="port">4444</property>
<property name="host">localhost</property>
<property name="type">web</property>
<property name="contentServerAdminID">sysadmin</property>
<property name="contentServerAdminPassword">idc</property>
</config>
<beans template="classpath:/META-INF/resources/adapter/adapter-services-scs.jxml"/>
</adapter>
</config>
My metada map is the default mapping as follows
<metamap>
<adapter name="scsadapter">
<common>
<map name="Title" native="dDocTitle" />
<map name="Author" native="dDocAuthor" />
<map name="Date" native="dInDate" />
<map name="ID" native="dID" />
</common>
<contribution>
<!-- native fields are used only for contribution -->
<native name="comments" default="" override="true" />
<!-- common fields refer back to common map, can also be tagged with default and override attributes -->
<common name="title" />
<common name="author" />
</contribution>
</adapter>
</metamap>
When is this error "common name {0} specified but is not mapped" thrown? Is my metadata map file correct?
Thanks
RajiHi,
I changed the query and executed the program, still getting the same error. I have followed the instructions in CIS developer guide to create the metamap file but unable to figure out the reason for the error. Any other suggestions?
Thanks
Raji -
Hello,
I am trying to build the pkg wepdecrypt from AUR using ABS. All the dependancies are installed, but during the makepkg I get the following error :
wepclient.c: In function 'server_connection':
wepclient.c:121: warning: pointer targets in passing argument 1 of 'inet_addr' differ in signedness
wepclient.c:123: warning: pointer targets in passing argument 1 of 'gethostbyname' differ in signedness
gcc -march=i686 -O2 -pipe -c -D__LINUX_WLAN__ -D__I386__ -o md5_digest.o md5_digest.c
gcc -o wepdecrypt wepdecrypt.o rc4.o wepfilter.o log.o
modes.o misc.o md5_digest.o wepserver.o wepclient.o verify.o keygen.o localkeygen.o -lcrypto -lz -lpcap
gcc: log.omodes.o: No such file or directory
make[1]: *** [wepdecrypt] Error 1
make[1]: Leaving directory `/var/abs/local/wepdecrypt/src/wepdecrypt-0.7/src'
make: *** [all] Error 2
==> ERROR: Build Failed. Aborting...
This is the PKGBUILD:
# Contributor: phloyd <phloyd>
pkgname=wepdecrypt
pkgver=0.7
pkgrel="1"
pkgdesc="Enhanced version of WepAttack a tool for breaking 802.11 WEP keys"
url="http://wepdecrypt.sourceforge.net/"
license="GPL"
makedepends=('gcc' 'make')
depends=('bash' 'zlib' 'openssl' 'libpcap' 'fltk')
source=(http://dl.sourceforge.net/sourceforge/$pkgname/WepDecrypt-$pkgver.tar.gz)
backup=('etc/wepdecrypt.conf')
md5sums=('72576cec9af9486bf64124b7aaa79f31')
sha1sums=('304c14db012392509d3b84d3e8d6c39e8b586fff')
build() {
cd $startdir/src/$pkgname-$pkgver
./configure
make || return 1
INSTDIR=/usr/bin
mkdir -p $startdir/pkg/$INSTDIR
mkdir -p $startdir/pkg/etc
mkdir -p $startdir/pkg/usr/man/man1/
install -m 755 src/wepdecrypt $startdir/pkg/$INSTDIR
install -m 755 run/wepdecrypt_word $startdir/pkg/$INSTDIR
install -m 755 run/wepdecrypt_inc $startdir/pkg/$INSTDIR
install -m 644 conf/wepdecrypt.conf $startdir/pkg/etc
install -m 644 doc/wepdecrypt.1.gz $startdir/pkg/usr/man/man1/
I would appreciate if someone tries and tell me whats missing or what i am doing wrong....
Tx,
Bthankyou and sorry for my error
but when installed I run:
grub-install /dev/hda
GNU GRUB version 0.97 (640K lower / 3072K upper memory)
[ Minimal BASH-like line editing is supported. For the first word, TAB
lists possible command completions. Anywhere else TAB lists the possible
completions of a device/filename. ]
grub> root (hd1,4)
Filesystem type is reiserfs, partition type 0x83
grub> setup --stage2=/boot/grub/stage2 --prefix=/boot/grub (hd0)
Checking if "/boot/grub/stage1" exists... yes
Checking if "/boot/grub/stage2" exists... yes
Checking if "/boot/grub/reiserfs_stage1_5" exists... yes
Running "embed /boot/grub/reiserfs_stage1_5 (hd0)"... 18 sectors are embedded.
succeeded
Running "install --stage2=/boot/grub/stage2 /boot/grub/stage1 d (hd0) (hd0)1+18 p (hd1,4)/boot/grub/stage /boot/grub/menu.lst"... failed
Error 15: File not found
grub> quit
this I view in my /boot/grub
default iso9660_stage1_5 minix_stage1_5 stage2_eltorito
device.map jfs_stage1_5 reiser4_stage1_5 ufs2_stage1_5
e2fs_stage1_5 menu.lst reiserfs_stage1_5 vstafs_stage1_5
fat_stage1_5 menu.lst.old stage1 xfs_stage1_5
ffs_stage1_5 menu.lst.pacnew stage2
Maybe you are looking for
-
Hands On Lab: JD Edwards EnterpriseOne Business Services Development
I am attempting to complete the tasks in the lab listed in this thread's title, but I am having trouble with it. My EOne versions are: App. Vers.: 8.12 Tools Vers.: 8.97.10 When attempting to add a published business service object to my project, whe
-
V_NL Net price report problem
Hi Experts, I have a problem in V_NL Net price report it is not showing net price correctly in report vs sales or billing net value. I could tell what is our scenerio in pricing report and what i have done on SAP. We need net value pricing report for
-
Hi, I have a number of video files in FLV format. I have an iBook G4 with Mac Os X I would like to collate them all, putting them on a dvd, with a central menu which gives the user the option to choose which one to watch! How do I do this! I have bot
-
It shows more events than the ones I have and they all have names from events I already have but contain only one pic or so...
-
Pre implementation Questions...
Hi, Can anybody tell me, what r the questions to be asked to client before doing "AS IS Analysis" (SD point Of View) to study their Business Process.which will be helpful for implementation. any link to SDN is there? Regards, Amol