Error calling appl. via OLE OA175 after inst. Patch4 or 5 of SAPGUI 7.20

I have maintained a OLE application with the "oaa4 ArchiveLink:Application Maintenance" to do special work on documents with special type.
It worked very well until I installed the Patch4 or Patch5 of the SAPGUI 7.20.
Now I get the message: "Error calling Application via OLE ...".
It looks like a bug in the patches but may be there is something wrong with me (or my application). Has someone any experience with this patch or with this error message.
In the meantime I got an answer:
You have to grant your OLE application in the security options in the SAP-GUI-Configuration.
Edited by: Terkosh on Feb 13, 2012 3:48 PM

how do I grant the OLE application ?

Similar Messages

  • OLE with c# for SAP AL - Error calling application via OLE GUIScanDoc

    Hi,
    I am creating a small scanning application which should be accessible from SAP. I read the documents  from SAP side which says, we need to create an OLE 2.0 Enabled application. I created an OCX application in vb6 and configured with SAP. the call is going to my ocx application but dont know how to implement "GUIScanDoc @AID,N" in my application. I tried to create a function named GUIScanDoc () in ocx but getting the same error stating *"Error calling application via OLE GUIScanDoc".
    If anyone has solution then plz plz help me out.
    Thanks in advance.
    P. Ramesh
    Edited by: rapr04 on May 22, 2011 2:37 PM

    I think you posted this in the wrong section of the forums, this area is just for SDK's relating to the BusinessObjects products.

  • OAWD - Error calling app. via OLE

    OAWD is a new transaction for my users.  We are in testing and are receiving an error message "Error calling application via OLE ...".
    ST01 trace is clean, but a workflow item does not always route to the mailbox.  Functional consultant says it is a security issue.  S_OLE_CALL is assigned to the users with required values (does not appear in trace).  I have already checked the standard role SAP_BC_SRV_ARL_USER and the Archive link documentation with no success.
    Any suggestions?  Have you seen this error before?

    I have teh same problem, when i am trying to attach a zip document in transaction ME53N.
    I am getting the following error:
    " Error Calling Application via OLE ALVIEWER.APP"
    Could anyone help me with this issue?.
    Thanks a lot
    David

  • Error calling application via OLE GUIScanDoc

    Hi,
    I am creating a small scanning application which should be accessible from SAP. I read the documents from SAP side which says, we need to create an OLE 2.0 Enabled application. I created an OCX application in vb6 and configured with SAP. the call is going to my ocx application but dont know how to implement "GUIScanDoc @AID,N" in my application. I tried to create a function named GUIScanDoc () in ocx but getting the same error stating *"Error calling application via OLE GUIScanDoc".
    If anyone has solution then plz plz help me out.
    Thanks in advance.
    P. Ramesh
    Edited by: rapr04 on May 22, 2011 2:37 PM

    I think you posted this in the wrong section of the forums, this area is just for SDK's relating to the BusinessObjects products.

  • Error calling BAPI_ADDRESSEMP_CREATE via SOAP

    Hi,
    I'm calling the remote-enabled function module (from Adobe Flex) via SOAP and its erroring and not returning anything. If I debug it, it gets as far as the statement below (in the function module HR_MAINTAIN_MASTERDATA) then just stops.
    CALL DIALOG 'HR_MAINTAIN_MASTER_DATA' USING BDCDATA MODE 'N'
    I know mode N is no-display, so why should this error? I know its coming into SAP via the ICM (over http) so there's no gui, but do we need a gui? I've seen remote-enabled function modules in the past that contained call transactions, and they worked fine!.
    Points awarded for help
    Graham

    I've been doing some more digging.
    Basically, the BAPI is simulating the infotype 0006 screen to put data in, but any error message or unexpected screens that comes up will cause the BAPI to fail. The BAPI doesn't do much validation before passing the data to the screens, it just checks that you've locked the employee record (and maybe does some other checks as well like authorisations).
    This means that you have to check your data in the call.
    Here are some things that I found to check
    1: Make sure that the start date, end date and subtype are supplied and are in the correct format (you can do this by placing an external breakpoint in the BAPI and checking it from here).
    2: Make sure all mandatory fields are specified.
    3: Make sure that there aren't any dynamic actions set up on infotype 0006 that could display other screens. Dynamic actions are normally ignore in batch input mode, but since the BAPI is doing a CALL DIALOG and not a CALL TRANSACTION, the field sy-binpt is not set to 'X'. One way round this is to create a z-function module which sets sy-binpt to X and then calls the BAPI.
    Any other suggestions welcome

  • How to repport Wi-Fi issue to Apple via e-mail after updating to Yosemite

    Can anyone provide please an e-mail address to Apple Support? I'm having an issue with my late 2012, 21.5" i-Mac randomly dropping Wi-Fi connection after installing Yosemite iOS. I can't understand why Apple is making so difficult to send them a feedback or complaint about their product. I have been struggling to get my computer up and running again for over a week. I did try almost all of remedies available on the Apple Forum without any success. I and my family have been supporting Apple for many years by purchasing their products. We spent several thousand of dollars and as loyal customer would like to get some help. I guess Apple is only interested about our money not to provide any form of support or help. Their software development division is a joke. Couple of weeks ago I lost all my of data and got my i-Pad 3 in a recovery mode while trying to update to iOS 8.0.1 which was pulled out of a network while I was updating. Supporting Apple doesn't make sense anymore because they do not support their customers the way they should. Thank you.

    Allan, thank you very much for the e-mail address. Unfortunately Apple doesn't response to customer concerns. Again, thanks for taking your time and helping.
    Regards

  • HT1923 I can´t reinstall itunes. I updated and after downloading the latest version and installing it the error message: "apple aplication support was not found. it is required to run itunes. uninstall and install again. Error 2

    I bought an iphone 4s. After plugging it via usb to my computer itunes demanded to update version to 10.3 or higher. I uninstalled itunes, downloaded latest version (11.0.2) and during installation process on "activating services" it shows error message: "installation failed, verify administrator priviliges" which i have because i sign in as my pc administrator. I click on ignore and it tells me itunes has been succesfully instaled but when i try to run it it shows the error message: "apple application support was not found. It is required to run itunes. Uninstall and install itunes again. (which i have done several times) error 2 (windows error 2)." Someone please help me with this problem. Thanks.

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Unable to download iTunes on my second windows computer (64 bit). I got it fine on my first one. After downloading the program and installing it, I keep getting an error message:Apple Mobile Device Failed to Start. This happens wven when my IPhone 5c is t

    I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Since this is Halloween, I have a iMac AppleStore/AppleCare horror story...that so far no one even in Apple Corporate Customer Service has been able to address. So who do you call after you've called Apple Corp?

    Oct 21 2013
    Hello my experience Apple Service has not been great. Anytime I have had to have something repaired...it has had to go back. Several years ago i had a logic board replaced on a Mac Pro but they forgot to serialize the board... (well?)
    Recently I had to take my iMac in (repair # R104249849) The check-in was great after that it was all down hill. I was told by one tech what would be done AND he would call me. I got no call. When I called  to find out what was going on, no one could give me any information...kind of like there was no communication between techs. no one ever called me to come get the iMac so went to the store ( I got tired of trying to getting "no answers" on the phone. It just so happened the iMac had been ready and was "just sitting" in the back running another diagnostic. A week ago the iMac shut down on it's own I got it running again...two days ago one of the fans started running a very LOUD HIGH SPEED yet the computer was not hot.  I wasted almost two hours with Apple Care iChat "typing" my story to only find out that that I would have to call the Apple Store in the morning and re-tell my story again...
    When I got a manager on the phone and mentioned I am under some tight deadlines his suggestion was "if it's possible for you to buy a new machine and return it when yours get fixed...(!)" I had a good laugh on that one.
    The iMac is there now being there hopefully being repaired.(repair #R10604084)
    I got "band aide fix" service when major surgery was needed.
    I know computers can cease to function anytime, but I also know that there are two sides to customer service:
    1) Learn to really listen
    2) Do thorough repairs
    I have been 100% Apple for over 20 years, does this mean anything to Apple?
    Oct 23
    I have spoken to Customer service at Apple Corp. They seem to take this serious.
    Oct 26
    I still don't have my computer and after speaking with the tech yesterday morning (who said they would call me before 6:00 PM...I never got a call)
    no can tell me when I will get this computer back.
    I called Apple Corp Customer service to ask why after all the company "ball dropping" and questionable repair work...simply replace the iMac.
    No one there has an answer for this.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

    I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router  to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support.  The advisor took over my screen and we check that my laptop was synchronising   with I phots and it was.  The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

    Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

  • Memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

    memory requirement is continiously increased when i am running my application program in an infinite loop,after certain time it shows an error called low virtual memory

    What are you doing with your program. Lots of improper programming techniques can cause this - building arrays, concantanating strings, opening but not closing refrences, etc. Need more details or post your VI. Also, have you looked at "LabVIEW Performance and Memory Management"? It's part of the shipping documentation and available from Help>Search the LabVIEW Bookshelf.

  • I still distribute most FCP projects via DVD. No matter which MPEG2 setting I use in Compressor 4 I get an error - even Apple's default DVD setting. Has anybody successfully output an FCP X project to compressor and then out on a DVD?

    I still distribute most FCP projects via DVD. No matter which MPEG2 setting I use in Compressor 4 I get an error - even Apple's default DVD setting. Has anybody successfully output an FCP X project to compressor and then out on a DVD?

    Anthony, thank you very much - this works, though I thought I had tried your process previously without success. I've tried so many things who knows. I've had zero luck going with the Send to Compressor or Export Using Compressor Settings under the Share menu. I'm also finding Compressor 4 to be a real dog on my system even though I have a brand new quad core machine with 8G of RAM. Prior to receiving your post I did come up with a different work process. Using Export Movie from FCP X and then loading the result in Compressor 3 works flawlessly. Thanks again!

  • When I try to install iTunes on my Windows computer I get an error message, "Apple Mobile Device failed to start".  After an incomplete installation when I try to open iTunes I get an error message, "MSVCR80.dll missing".  I downloaded MSVCR80.dll.

    When I open iTunes I get an error message "MSVCR80.DLL missing".  I downloaded this .dll and installed in C:\Windows|System32.  I then scanned my computer to fix registry errors.I uninstalled iTunes and reinstalled and got the following error message "Apple Mobile Device failed to start".

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Web-UI error message "Access via 'NULL' object reference not possible"

    I need some help, I'm not a Basis person but I need to get this connection problem resolve.
    This problem is in our DEV ICWeb system.  After logging in to Web-UI, I got a error message "Access via 'NULL' object reference not possible".  We have 3 clients (100, 220, & 310) in DEV and all 3 clients are giving me the same error message.
    From the help.sap.com, I found this topic http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
    but in the document it asked to go to SM59 to check the ESH_APPL_WS_TEMPLATEENGINE destination.  But we don't have that destination setup in all our systems.
    Here is the complete error message:
    Error when processing your request
    What has happened?
    The URL http://crm-dev.staff.copa:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
    Note
    ■The following error text was processed in the system CD1 : Access via 'NULL' object reference not possible.
    ■The error occurred on the application server CRM-DEV_CD1_00 and in the work process 0 .
    ■The termination type was: RABAX_STATE
    ■The ABAP call stack was:
    Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
    Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
    Method: EH_TRIGGER_NAVIGATION of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
    Method: SET_WORKAREA_CONTENT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
    Method: PROCESS_NAV_QUEUE of program CL_BSP_WD_VIEW_MANAGER========CP
    Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
    Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
    Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
    Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
    Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
    What can I do?
    ■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CD1 in transaction ST22.
    ■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server CRM-DEV_CD1_00 in transaction SM21.

    Hi Michael,
    Refer to the link below and check the procedure.
    http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
    Regards,
    Arjun

  • Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

    Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

    Many thanks.
    With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
    http://www.rarlab.com/download.htm
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Maybe you are looking for