Error Cluster Source and Explanatio​n differ
I have a routine that unbundles the error cluster and is supposed to append the 'source' string to some status information that had occurred before that point. I ran some tests and found that the "Source" string differs (provides less information) than what is displayed in the Explanation field of the ErrorOut Cluster. How do I access the more verbose 'Explanation'?
Hi Mr Bean!
The errors are staded in several .txt files in the National Instrument library on your harddrive, search for *errors.txt and you will find a lot of them.
You can even state your own errors if you Select Tools»Advanced»Edit Error Codes in LV.
I created a simple VI there i use the Error Code Database.vi from the Error.llb to get the description for a specific error code.
Regards
/Thomas
Attachments:
Error_Code.vi 22 KB
Similar Messages
-
Pass an error cluster in and out of a C/C++ dll?
Hi all,
I'd like to know if it is possible to pass a LabVIEW error cluster to a C/C++ function from a dll. This would greatly help error handling in the different VIs.
I am able to access and modify the first two members of the error cluster; the error status and the error code, which are, respectively, boolean and integer. But I cannot modify the string. LabVIEW crashes completely doing so.
I first define a structure in C++ like this:
const int N = 512;
#pragma pack(push,1)
typedef struct lvcluster {
bool status;
int code;
char source[N];
} lvcluster;
#pragma pack(pop)
Then, I define a function that will access the members status, code and source:
int TestCluster(lvcluster *err)
err->code = 1;
err->status = false;
sprintf(err->source, 'Test');
I then use LabVIEW's "Call Library Function" to call this dll's function. I have set the parameter "err" to "Adapt to Type" and "Handles by Value". Trying to write characters to the source array crashes LabVIEW.
Is this possible at all? How should it be done?
Thanks!Thanks all for the comments.
I've been looking at extcode.h where I saw the defeninition of a LStrHandle. It seems to be a pointer to pointer to "character array":
typedef struct {
int cnt; /* number of bytes that follow */
unsigned char str[1]; /* cnt bytes */
} LStr, *LStrPtr, **LStrHandle;
The "character array" is different than a C character array, see http://www.ni.com/white-paper/4877/en/#toc4
The first 4 bytes contain a signed 32 bit integer representing the number of characters. There is no NULL-termination character.
So the error structure should be something like this (modulo the size of boolean, thanks rolfk):
const int N = 512;
#pragma pack(push,1)
typedef struct lvcluster {
bool status;
int32 code;
LStrHandle source;
} lvcluster;
#pragma pack(pop)
From there, I was able to access a LabVIEW string from C. But I am unable to modify any of it. I might be able to change the characters from an alreay allocated string, but resizing or even creating a new string crashes LabVIEW. As reported by others, manipulating these strings would require linking against labview's library to access the string manipulation functions, but this is not possible as the library must be independant of LabVIEW.
The only last possible way I can think of is to allocate a new cluster inside the DLL. Then I might be able to change the string in it, and hopefully LabVIEW would pick it up. I don't know how LabVIEW manages its memory; would it garbage collect the input cluster that is not used anymore?
Thanks for all the feedback. -
Hallo LabVIEWers,
trying to make a good programming style, I implement error cluster inputs
and outputs on each of my VIs very thoroughly.
Now then, if I use eg the VI Server to call my VIs (call by reference node)
I have two error cluster outputs in my data flow, one from the Call by
reference and one from my own VI.
Now my question: How should I handle these two flows, is there a way to or
them together ? Should I ignore one of them ? Should I keep them seperate ?
Wiring the CallByReference output cluster to the own VI's input doesnt't
work because of cycle dataflow dependancies (of course)! What's a good
LabVIEW style and what are your suggestions ??
Thank you
OliverUnder the Time&Dialog palette
Merge Errors
Lets you merge error I/O clusters from different functions. The function
first looks for errors among error in 1, error in 2 and error in 3, then
through error array in. The first error found is reported. If no errors are
found, the function then looks for warnings and returns the first warning
found. If no error warning is found, the function returns no error.
Click the parameters for more information.
If you're in LV5 you'll just have to implement a similar function.
Oliver Friedrich wrote in message
news:[email protected]..
> Hallo LabVIEWers,
>
> trying to make a good programming style, I implement error cluster inputs
>
and outputs on each of my VIs very thoroughly.
> Now then, if I use eg the VI Server to call my VIs (call by reference
node)
> I have two error cluster outputs in my data flow, one from the Call by
> reference and one from my own VI.
>
> Now my question: How should I handle these two flows, is there a way to or
> them together ? Should I ignore one of them ? Should I keep them seperate
> Wiring the CallByReference output cluster to the own VI's input doesnt't
> work because of cycle dataflow dependancies (of course)! What's a good
> LabVIEW style and what are your suggestions ??
>
> Thank you
>
> Oliver
>
> -
I am using VS 2012 and BizTalk 2013 and attempting to deploy an application to BizTalk when I get these errors:
Error 47
at Microsoft.BizTalk.Deployment.Assembly.BtsMap.Save()
at Microsoft.BizTalk.Deployment.Assembly.BtsArtifactCollection.Save()
at Microsoft.BizTalk.Deployment.Assembly.BtsAssembly.Save(String applicationName)
at Microsoft.BizTalk.Deployment.BizTalkAssembly.PrivateDeploy(String server, String database, String assemblyPathname, String applicationName)
at Microsoft.BizTalk.Deployment.BizTalkAssembly.Deploy(Boolean redeploy, String server, String database, String assemblyPathname, String group, String applicationName, ApplicationLog log)
0 0
Error 49
Failed to add resource(s). Change requests failed for some resources. BizTalkAssemblyResourceManager failed to complete end type change request. Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present. Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
0 0
Error 46
Failed to deploy map "XXX.BTS2013.XXX.Maps.map_XXXX_R01_InsLabProc".
Error saving map. Stored procedure returned non-zero result. Check if source and target schemas are present.
0 0
I also tried to Import a MSI file from our test environment to see if that would work...got the same errors. After spending hours (not kidding) looking for an answer, all I could find is that a hotfix would work. So, I got the hotfix from Microsoft
Support and applied it then rebooted. Still getting the same errors. I'm absolutely at a stand still. Interesting that I got this application to deploy yesterday and then the next time I deployed it I started getting these errors. I'm
ready to pull my hair out!
Is there an answer for this out there somewhere? Any help would be appreciated.
Thanks,
DaveHi Dave,
Which hotfix have you applied? I don't think a hotfix of this issue is available for BizTalk 2013 yet. You should create a
support ticket with Microsoft to get a solution.
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
LabVIEW new "Silver" error cluster and TestStand
I have some new VI's that use the new "Silver" style error controls and indicators. I started calling the VI's from TestStand and noticed that the new VI's were not auto populating the TestStand error to the VI's error out. Not sure how this mechanism works but it doesn't work with the default "Silver" controls. I think it is name based case sensitive and I just have to rename the "Error Out" cluster to be lower case "error out".
Paul -
Can you confirm that the problem you're describing is that because the name of the Silver error cluster is "Error Out", when you configure a LabVIEW step to call a VI that has the Silver error cluster wired to the connect pane, TestStand does not automatically assign Step.Result.Error to that parameter? If so, we have reproduced this behavior and yes, you are correct that it is due to case sensitivity. We have taken note of this in order to fix the problem in a future version of TestStand.
I also just wanted to confirm that the problem is not that the error information is not correctly passed from LabVIEW to TestStand, when you assign Step.Result.Error to a Silver error cluster parameter.
Please let me know.
Manooch H.
National Instruments -
hello gurus, I have a Infosource name 2LIS_05_QE2, I haved assigned 4 Source System namely (CD1513, GP1590, TD1511, WD1511), It uses a Function Module in R/3 and Appended Structure (I've already transported the FM, Appended DS, Function Group and the Zsextractor assignment), I don't have any problems in activating other Source System (CD1513, GP1590, WD1511) only in TD1511, I can't activate the Transfer Rule and Im getting the error,
"Error in source system TD1511 "
Ive already replicated the Source Ssytem and only in T Cluster Im currently experiencing the said problem, I even go to Source System and right click on the T Cluster to check, and the connection is ok, What maybe the caused of the said problem? thank you very much... I really appreciate any help...Ive fixed it, Ive check all the R3 box 2 by 1, and T Cluster was down, by the way thanks, The Checking of connection in BW is so confusing because it says "OK", but when I check each cluster individually, I noticed it was down, Thank you very much,I will give you a score
-
Debugging Deserialization Errors Between AIR and BlazeDS on ColdFusion using ORM
Now that I am using CF + ORM for most of my Flex and AIR projects, I've had a much more difficult time with the deserialization of objects from AS to CF. The errors thrown by BlazeDS are not helpful at all, and not indicative of the true issue. cfgatewayadapter.jar is a closed source, and make it even more difficult, because it is the culprit in these issues. These issues can sometimes take a full day or two to resolve because the only way I've seen to debug is to start removing code line by line until the thing works. Huge waste of time.
The problem stems from the fact that during deserlization CF barfs when something doesnt match. Instead of throwing a useful error, it proclaims the CFC doesnt exist serverside. The developer then has to go through each componenty property-by-property to try to determine where the problem is.
What we need is something more specific to what the actual problem is. I've not found an adequate way to debug this, and it's causing me to seriously considering changing the backend to Groovy + Granite so I can get the control I need. Really, Adobe just needs to open up the source on cfgatewayadapter or put some time into refining it so that it throws accurate errors.
Examing the error below, one would think that the CFC does not exist. However, if you run the same examples from CFML and pass it an instance of StreamProvider it works fine.
[BlazeDS]Error deserializing client message.
coldfusion.runtime.CfJspPage$NoSuchTemplateException: Could not find the ColdFusion component or interface StreamProvider.
at coldfusion.flash.messaging.io.ColdFusionPropertyProxy.createInvokable(ColdFusionPropertyP roxy.java:132)
at coldfusion.flash.messaging.io.ColdFusionPropertyProxy.createInstance(ColdFusionPropertyPr oxy.java:93)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.cfreadScriptObject(CFAMF3Input.java:524)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.readScriptObject(CFAMF3Input.java:250)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.cfreadObjectValue(CFAMF3Input.java:138)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.cfreadObject(CFAMF3Input.java:88)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.cfreadJavaArray(CFAMF3Input.java:748)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.cfreadBodyAsJavaArray(CFAMF3Input.java:110)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.cfreadBodyAsJavaArray(CFAMF3Input.java:102)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.readScriptObjectInternal(CFAMF3Input.java:3 95)
at coldfusion.flash.messaging.io.amf.CFAMF3Input.readScriptObject(CFAMF3Input.java:246)
at flex.messaging.io.amf.Amf3Input.readObjectValue(Amf3Input.java:152)
at flex.messaging.io.amf.Amf3Input.readObject(Amf3Input.java:130)
at flex.messaging.io.amf.Amf0Input.readObjectValue(Amf0Input.java:123)
at flex.messaging.io.amf.Amf0Input.readArrayValue(Amf0Input.java:359)
at flex.messaging.io.amf.Amf0Input.readObjectValue(Amf0Input.java:127)
at flex.messaging.io.amf.Amf0Input.readObject(Amf0Input.java:94)
at flex.messaging.io.amf.AmfMessageDeserializer.readObject(AmfMessageDeserializer.java:227)
at flex.messaging.io.amf.AmfMessageDeserializer.readBody(AmfMessageDeserializer.java:206)
at flex.messaging.io.amf.AmfMessageDeserializer.readMessage(AmfMessageDeserializer.java:126)
at flex.messaging.endpoints.amf.SerializationFilter.invoke(SerializationFilter.java:145)
at flex.messaging.endpoints.BaseHTTPEndpoint.service(BaseHTTPEndpoint.java:291)
at coldfusion.flash.messaging.CFAMFEndPoint.service(CFAMFEndPoint.java:295)
at flex.messaging.MessageBrokerServlet.service(MessageBrokerServlet.java:353)
at coldfusion.flex.ColdFusionMessageBrokerServlet.service(ColdFusionMessageBrokerServlet.jav a:114)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.filter.FlashRequestControlFilter.doFilter(FlashRequestControlFilter.java:71)
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
[BlazeDS]Deserializing AMF/HTTP request
Version: 3
(Message #0 targetURI=null, responseURI=/3)
(Array #0)
[0] = (Typed Object #0 'flex.messaging.messages.RemotingMessage')
source = "com.mediaslurp.remoting.ProviderServiceProxy"
operation = "savePendingProvider"
timeToLive = 0
body = (Array #1)
[0] =
[BlazeDS]Serializing AMF/HTTP response
Version: 3
(Message #0 targetURI=/3/onStatus, responseURI=)
(Typed Object #0 'flex.messaging.messages.ErrorMessage')
headers = (Object #1)
rootCause = (Typed Object #2 'coldfusion.runtime.CfJspPage$NoSuchTemplateException')
rootCause = null
message = "Could not find the ColdFusion component or interface StreamProvider."
localizedMessage = "Could not find the ColdFusion component or interface StreamProvider."
detail = "Ensure that the name is correct and that the component or interface exists."
cause = null
missingFileName = "StreamProvider"
type = "Application"
body = null
correlationId = null
faultDetail = null
faultString = "Error deserializing client message."
clientId = null
timeToLive = 0.0
destination = null
timestamp = 1.295530026739E12
extendedData = null
faultCode = "Client.Packet.Encoding"
messageId = "6C6E6657-430C-12E6-8B58-E33F7A6D59DC"does MySQL work by itself? did you try connecting to your
databases with
phpMyAdmin or alike?
also, make sure you do not have several
mysql-connector-xxxxxx.***.bin
(whatever their names are, you know, the jdbc driver files)
of different
versions - make sure there is only ONE, preferably the latest
one,
anywhere on your server. remove any other ones.
if i remember correctly, the exception you get in the error
is usually
caused by incorrect/old mysql connector drivers...
Azadi Saryev
Sabai-dee.com
Vientiane, Laos
http://www.sabai-dee.com -
SQL Server Source and Flat File Target in OWB
Hello All,
I have a question, is it possible to have SQL Server as Source and Flat File as Target without using any intermediate Oracle table(s).
like
SQL Server --> ETL Operators --> Flat file?
as i m getting errors in data type conversions here. but if i replace flat file with Oracle table it works fine. (though i have used some conversion functions for data types as well in Flat file loading but it is giving me errors)
Thanks in advance.
TayyebYes this should be fine. Are you using the gateway to access SQLServer or code template mappings? You need to track which columns are throwing the data type conversion errors.
Cheers
David -
Error 1308.Source file not found with 9.4.2 Admin Install point
I'm including as much information in this post as possible to help narrow down my problem, so if it's too wordy I appologize.
I've created an Admin install point for Acrobat 9 patching it up to Acrobat 9.4.2 using the following commands in a batch file:
D:
cd \Adobe\Acrobat\AcrobatPro9
md \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP /Liv D:\Adobe\Acrobat\AcrobatPro9AIP\install900.log /qn
cd \Adobe\Acrobat\AcrobatPro9AIP
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd941_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install941.log /qn
start /wait msiexec /p D:\Adobe\Acrobat\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=D:\Adobe\Acrobat\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I rename the folder "AcrobatPro9AIP" to reflect the current version (e.g. "Acrobat9.4.2"), copy the folder to my DFS, create an MST with the Customization Wizard, and then deploy with Group Policy.
Before I deploy I always run a few test installations on two Windows XP 32-bit machines, and two Windows 7 64-bit workstations. I've been using this method to build my install point for the last 5 Adobe patches without a problem, but suddenly with version 9.4.2 my test workstations pop up with the following error during the installation via the standard installation method "msiexec /i acropro.msi TRANSFORMS=acropro.mst":
I built my installation package for acrobat9.4.1, 9.4.0 and 9.3.3 exactly the same way and the installations did not have this error. The file in question "Adobe.Acrobat.Dependencies.manifest" does not exist in my 9.4.1, or 9.4.0 package folders, nor does it exist in the 9.4.2 folder. Any suggestions?I am having the same problem, all the relevant info was already covered in the "thewaker" post above. I too have made a script to make a Admin install with patches up to 9.4.2. The script worked for 9.3.3 but when I remade the AdobeAIP for 9.4.2, I too got this error when installing it, even manually. (Error 1308.Source file not found. Adobe.Acrobat.Dependencies.manifest ) Running on Windows 7 32bit.
Here is my Script.
C:
cd\AcroBatPro9
md \AcrobatPro9AIP
start /wait msiexec /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP /Liv c:\AcrobatPro9AIP\install900.log /qn
cd \AcrobatPro9AIP
start /wait msiexec /p c:\AcrobatPro9\AcroProStdUpd910_T1T2_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install910.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd912_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install912.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd920_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install920.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd930_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install930.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd932_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install932.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd933_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install933.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd940_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install940.log /qn
start /wait msiexec /p c:\AcrobatPro9\AcrobatUpd942_all_incr.msp /a AcroPro.msi TARGETDIR=C:\AcrobatPro9AIP PATCHAIP=1 /Liv install942.log /qn
I did notice though that the "thewaker" has added AcrobatUpd941_all_incr.msp to his script, which is a security update. Which may be "a" problem, but I don’t think this is related to the problem we are having.
Administrative deployment
Administration Installation Point (AIP) deployments must not apply a quarterly update AIP in which a security update was the most recently applied update. Because a quarterly update includes the changes implemented in all recent security updates, the quarterly update forcibly bypasses those updates entirely. To deploy a quarterly update from an AIP, create a AIP which includes only quarterly updates as follows:
Acceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security)
Acceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.2 (Quarterly)
Unacceptable: Acrobat 9.0.0 -> 9.1.0 (Quarterly) -> 9.1.2 (Quarterly) -> 9.2.0 (Quarterly) -> 9.3.0 (Quarterly) -> 9.3.2 (Quarterly) -> 9.3.3 (Quarterly) -> 9.4.0 (Quarterly) -> 9.4.1 (Security) -> 9.4.2 (Quarterly)
Anyway.. Any help with this would be helpful as I would like to deploy it soon.
Thanks. -
I'm travelling and trying to back up my new iPhone to iCloud. I have sufficient storage, am connected to wifi and it's plugged into a power source and yet it doesn't seem to work at all. I'm currently in India. Could that be the cause or can anyone suggest any reason why this wouldn't work?
"gets stuck" - are there any error messages?
If you get the error "Backup not successful" and you've tried deleting the last backup and trying to back up manually without luck, try the following test: Go to...
Settings>iCloud>Storage & Backup>manage Storage, tap your device name in the Backups section, then look under Backup options. Turn off all apps from backup and then do a manual backup. If that doesn't work, then this post will not help. If the backup works, then go back to the app list and turn some on and try another backup. If successful, keep repeating these steps. If it fails at some point, then try to zero in on the one app that seems to make the backup fail. (I had this problem and found one app failing, probably due to a corrupt data file.)
This process will take time, but if a backup works with no app data being used but clearly fails with the original settings, then somewhere in the mix of apps is a "bad" one. -
Error cluster constant appears different in two locations on a block diagram
I am a newbie to LabVIEW. I have taken Core 1 & 2 and Machine Vision and I have not com across this before.
The image on the right is obviously an Error cluster constant used in the block diagram to create an Error cluster and wire it to an error out terminal. As far as I can tell the image on the left is about the same thing, but why does it look different? The different appearance causes raises a concern that there is a difference in behavior that I do not understand. LabVIEW help suggets that both are Error constants. When I create a new error constant, it always ends up appearing like the right image above. I have not been able to create someting looking like the image on the left.
Could someone please confirm what the image on the left is on a blck diagram?
Thanks,
Bill
Solved!
Go to Solution.The image on the left is an error cluster control. It has a front panel presence and can be set either via the front panel or through a property node or local variable. The image on the right is an error cluster constant. It is a static value.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot -
Error in source system while extracting the data from R/3!
Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
RaviHi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data. -
Error in source system in BI 7.0...
Hi,
When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
EDI- partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
PARNUM-PARTNER NUMBER
PARTYP-PARTNER TYPE
Please help me in solving this. Thank You.Hello,
Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken -
"Error in source system" while creating source system
Hello,
I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
The error occurs after the information "Please log on as an administrator in the following screen".
The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
What else could be the problem?
Greetings & Thanks
BettinaHello,
now we know that
1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
2. the system has to be changeable (scc4 and se03)
After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
Thanks for the tip regarding the authorizations.
Greetings
Bettina -
Error in Source System, Time series does not exist
Hi Guys,
I am loading the data from APO system and i am getting the below error after scheduling the info Packs.. can you analyze and let me know your suggestions
Error Message : Time series does not exist,
Error in Source System
I have pasted the ststus message below
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks,
YJHi,
You better search for the notes with the message ""Time series does not exist". You will get nearly 18 notes. Go through each note and see the relevence to your problem and do the needful as it is mentioned in the note .
Few notes are:
528028,542946,367951,391403,362386.
With rgds,
Anil Kumar Sharma .P
Maybe you are looking for
-
BT Netprotect Plus and Home Network.
I have just upgraded to BT Infinity and BT Netprotect Plus. My old Desktop, with LAN, and my Netbook ,wireless, both run Windows XP and previously had Mcafee Internet Security on both. Prior to the 'upgrade' the home network was fine. Now in lets cal
-
Hi Adobe You a have a really wonderful PhotoShop CC product. It's really great, and I know new versions such as 2014 have their teething problems. But I am getting really sick of my Windows 7 Professional 64-bit PC being crashed whenever I try to use
-
IPhone 3G 16gb Backing Up forever, takes over 2.5 hours, free space is 92%
I have an iPhone 3G 16GB. It is on OS 3.0.1. I have been trying to back up that phone for a while now on both iTunes 8.1 and iTunes 8.2. It gets stuck around 60% and never moves for a long long while - over an hour and half. Today, I won the battle o
-
Webanalysis : Query Log File
Hi, Plz suggest me where can i the path for report's query log file. i.e I run a webanalysis report and now i want to see the query that it fire to the source. I want to see the detail level log. Is there any other setting that i need to do like entr
-
Error in cash sales / rush order process
Hi i have created cash sales and rush order as delivery being created immediately but in my case its not creating i have done config i.e checked th box for immediate delivery but still getting error kindly help where am doing mistake .when am trying