Error code 2400 issue

I can read library e books on myipad w out probs but when I tried downloading e books on my husbands iPad I cannot authorize w my user name and pswd w out getting error MSG 2400

Hi Dennis Knutson
Thanks for your reply.
I attached some VI for your reference . These VI used for both two thread  and be invoked  so many times in my teststand sequence with difference config .
All VI have creat a task and close the task ,so I think there is no conflict . I think we need not use "LoCK" function , when two task visit DAQ card, they will be a queue and work one by one, am I right?
Sonic
Diffrent Strokes for Different Folks
Attachments:
New Folder.zip ‏576 KB

Similar Messages

  • Account-specific (Error code -36) issue -- I'm stumped.

    Hello All:
    I'm at my wits' end trying to figure this one out; I've searched the forums (and about half of the internet), but I haven't yet run across this particular scenario:
    Client's Mac:
    G4/500 running Mac OS X 10.3.9
    (there are 6 other Macs in this office; no others are experiencing this problem)
    Shared PC:
    WinXP SP2 running on an older beige Gateway PIII box.
    Shared folders set up (with sharing permissions verified thoroughly).
    Problem
    The client is unable to connect to shared folders on the WinXP box; every time she tries, she's presented with the error message:
    [quote]The Finder cannot complete the operation because some data in (smb://IPA.DDR.ESS.HERE) could not be read or written.
    (Error code -36).[/quote]
    This happens no matter how I authenticate (using her creds or mine -- I'm a domain admin, so I should have access) when trying to connect from her admin account. However, I am able to connect to any shared volume on the same machine if I log in on another admin account on the Mac (even if I use her credentials).
    Obviously, it's not a connectivity or hardware issue, since the same computer is connecting without a problem (using a different account). Also, none of the other Mac users are having this problem. All users are on the same subnet.
    Here's what I've tried so far in my troubleshooting process:
    1. I verified sharing setup and permissions on the WinXP volume;
    2. I tested to ensure other Macs could see the share -- they all could;
    3. I've run the Mac OS 10.3.9 Combo updater;
    4. I've updated Symantec Antivirus on the WinXP box (per the recommendation of an artice; but clean dogs?never hurts);
    5. I've searched high and low with Google.
    Since I can get to it from other accounts on the same computer, I'm inclined to believe there's some sort of user preference file corruption (or some other account-specific problem).
    Is there a .plist file in the user's account that could be removed (and allowed to rebuild) to restore connectivity to the shared volume? Or is there some sort of utility to "rebuild" a user account? ...or am I barking up the wrong tree here?
    Any assistance would be most appreciated!

    Thanks for the suggestion, Charles.
    I eliminated hardware as a culprit early in the troubleshooting process, since internet connectivity was still robust.
    I also thought that the Directory Access information may have been to blame; that's why I went so far as to do a combo updater (as a sort of "whack on the head" measure).
    But when I was able to log on the same Mac using a different account and I did not experience the issue, I started looking at account-specific issues.
    From what I understand, Directory Access (SMB inclusive) are system-wide settings affecting all user accounts. Given that assumption, I was thinking there might be some sort of user-specific preference file that might be to blame here, but I don't want to just start blowing out .plist files willy-nilly until I can obtain a better understanding of which one(s) might be at fault.
    My fallback plan is to simply create a new account for the user and migrate all her information over folder-by-folder, but I'm hoping there's an easier fix (plus, I'm looking at this as an opportunity for a better understanding of user account structure).

  • IMac OSX 10.6.8: error code -8003 issue when trying to empty trash

    I get the following error code when trying to empty trash:
    The operation can’t be completed because an unexpected error occurred (error code -8003).

    Have a look here for help: http://reviews.cnet.com/8301-13727_7-20020873-263.html

  • Error code 6 at open file

    Hi,
    I am facing the error code 6 issue while trying to write to a text file. I have gone through all the posts which describes this issue and some possible solutions. I am still facing this issue. Here are some details:
    1. The code writes data to a .txt file , which is always unique . Each time the application executes a new .txt file gets created as per the serial number of the UUT.
    2. The error 6 is not very frequent , it appears once or twice duing its execution period over a month.
    3. I have FGV which stores all the data and then writes it to the text file
    4. I have also ensured that the code doesn't writes a huge amount of data at a time, so i am clearing the FGV after acquiring / writing the latest test data.
    I am attaching the vi snippet for refrence
    Thanks and Regards
    Attachments:
    Test log.png ‏68 KB

    Hi ariv,
    As the vi path is wired through the for loop the function write characters to file.vi will get a blank path and will prompt for a file location .
    That's what I wanted to point out...
    The function where the error occurs is write characters to file .vi which is outside the for loop.
    Which parameters/data are passed to that function when an error occurs? Did you check that?
    Can you replicate that error using the same parameters/data in a fresh VI?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

    I get this error when installing VS 2015 Community RC.  I'm installing on Windows 10 build 10074.  I tried uninstalling VS and tried performing the steps from other known issues... Change > Custom > Select feature > Update.
    I also get the other errors as well...
    Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
    Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

    Same issue here, on a Surface Pro 3.
    I've tried all I can think of, including a full reinstall of the OS (10074). Basically it always fails with the errors below.
    Launching VS I do have the UAP templates installed, but not the emulators. I can create a new Windows Universal app no problem, however it shows up as a Windows 8.1 type in the properties pane. Missing lots of references so obviously nothing builds.
    Tried installing the tools separately (the ones linked by Paul Chapman in a separate thread). These installed fine, and gave me the emulators (at least in the drop down, haven't been able to verify they work as nothing else works). Proceeded to "repair"
    the VS install after this and at that point the install completed without errors, however nothing still works inside VS. Then proceeded to "modify" and remove any Universal app stuff, rebooted and reinstalled, only to get the same error again and
    back at square one.
    Tried, as far as I can remember, fresh installs from both the ISO and webinstaller (as there was some talk about the ISO containing older code and missing some tools).
    Spent a week trying to get a Win10 rig up now, to no avail. Previous builds (with CTP6) would give me a UAP mobile install error, which seemed linked to Hyper-V not working, however Hyper-V was working just fine...
    Oh, and obviously - No, I did not cancel the install myself.
    Here are some relevant lines from the install log,
    [060C:0CF0][2015-04-30T14:20:08]i000: MUX:  Source confirmed
    [060C:1994][2015-04-30T14:20:14]i000: MUX:  Finished connecting secondary installer pipe
    [060C:14D4][2015-04-30T14:20:19]i000: MUX:  Updating secondary installer progress display name: Windows 10 SDK 10.0.10069
    [060C:14D4][2015-04-30T14:20:25]i000: MUX:  Updating secondary installer progress display name: Tools for Windows 10 Universal Apps (Windows SDK 10.0.10069)
    [060C:044C][2015-04-30T14:28:13]i000: MUX:  ExecuteError: Package (VSSecondaryInstaller_box) failed: Error Message Id: 1603 ErrorMessage: Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
    [0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Process returned error: 0x80048646
    [0288:0054][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to execute EXE package.
    [060C:044C][2015-04-30T14:28:48]e000: Error 0x80048646: Failed to configure per-machine EXE package.
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  Installation size in bytes for package: VSSecondaryInstaller_box MaxAppDrive: 0  MaxSysDrive: 2063301632  AppDrive: 0  SysDrive: 2060471296
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  ExecutePackageComplete for secondary installer
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  Disconnecting secondary installer pipe
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  Return Code:0x80048646 Msi Messages:Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294 Result Detail:0 Restart:None
    [060C:044C][2015-04-30T14:28:48]i000: MUX:  Set Result: Return Code=-2147187130 (0x80048646), Error Message=Windows 10 SDK 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294, Result Detail=, Vital=False, Package
    Action=Install, Package Id=VSSecondaryInstaller_box
    [060C:044C][2015-04-30T14:28:48]i000: Setting string variable 'BundleResult' to value '0'
    [060C:044C][2015-04-30T14:28:48]w350: Applied non-vital package: VSSecondaryInstaller_box, encountered error: 0x80048646. Continuing...
    Think I'll go buy a Mac...

  • No administrator rights and Error code 21:

    Hi,
    I am using a WIndows XP, Labview 8.2.1, and NiDAQ drivers (8.5) along with a PCI-6024E board that is hooked to some commercial equipment.  The supplier of the equipment has a user created .exe file.  The loadup disk from the equipment manufacturer includes the installation of the Labview 6.0 Run-time Engine installation wizard as well as older NiDAQ drivers (8.0.1).  We DID NOT use the older NiDAQ drivers, but rather the newer iones that came with the current version of Labview we just purchased.
    All of these programs need to be loaded as an administrator, so we have a helpdesk person log onto the machine and give temporary admin rights to us.  When we try the program (the .exe file) all works as it is supposed to. We then logged out and logged back in without our Admin rights.  After rebooting, we wind up getting Error code 21 issues and the program does not ever load correctly.
    What could be the difference between running the programs in an adminstrator mode as opposed to a non-administrator mode?  In the non administrator mode all of our user created VI's always work fine.....
    Thanks.
    -Andy

    Hi Andy,
    Were the programs and the exe allowed to install in their default locations? This error could be because executables sometimes write and/or create certain files such as the ini file when they are opened, and if the installer put these files into an "administrator-only" location it won't let you into it when not logged in as administrator.
    amott wrote:
    We DID NOT use the older NiDAQ drivers, but rather the newer iones that came with the current version of Labview we just purchased.
    Can you clarify what you mean by "We DID NOT use"? Did you not let the exe install the older RTE and DAQmx versions? When did you get the error message - when you tried to run the exe without LV open?
    Stephanie

  • Installlation Error Code 0X80096005

    Initially when i tried to install Nokia Suite i got the error (Verisign primary intermediate CA certificate missing.
    After installing the certificates as per procedure mention here on
    http://betalabs.nokia.com/trials/nokia-suite-beta/bugreport/install-failed-on-nokia-suite-your-compu...
    I am getting a new error now. Error code is 0X80096005.. Please help me in this regard.
    Thanks
    Arslan

    Hi,
    Welcome to the forum!
    Based on the error code, the issue is related with your computer. You can check this link for the solution provided by Microsoft: http://support.microsoft.com/kb/822798
    If it's still the same, it's best to contact Microsoft for further assistance. You can contact them through here: http://support.microsoft.com/contactus/
    Hope this helps. 

  • Lenovo 3000 N100 Network issue / Wireless Stack initializa​tion failed, error code 117

    Hi,
    Lenovo 3000 N1000 with 1GB Ram, Win XP SP2, purchased in May 2006. WLAN network with WPA-PSK key worked without any issues so far and is still accessible with PC.
    After transferring music via from my notebook to my mobile Bluetooth all network adapters seem to be disconnected. Neither Access Connections (AC) nor Windows can find any wireless network. Also if I try to configure any LAN, WLAN with Windows I get the message that all network adapters have been removed. However I cannot spot any issue in the device manager as all parts are shown to be working OK.
    This is what I've done so far:
    1) Checked Radio switch ---> on
    2) FN +F5 --> connection on
    3) Uninstalled AC, downloaded and installed most actual version (5.00 Build 7VCX32WW)
    4) Installed new version for wireless driver for Intel(R) PRO/Wireless 3945ABG (version 12.0.0.82)
    Still, even if I uninstall AC to check if WLAN is working at all, Windows gives the error message that all network components have been removed.
    Diagnose Tool gives the following output:
    "Wireless Stack initialization failed, error code 117"
    Logfile:
    Description : Intel(R) PRO/Wireless 3945ABG Network Connection
    Type : Wireless LAN Adapter
    DriverVersion : 10. 5. 1. 59 ----> why is the old driver version??????????
    PNPID : PCI\VEN_8086&DEV_4227&SUBSYS_10118086
    SupplicantVersion : AEGIS Protocol (IEEE 802.1x) v3.5.3.0
    ERROR AcSvc( SYSTEM(Prvlg).1108.4580) [9/3]11:04:15:703 CAcGolan::GetRadioStateInDriver: Golan API GetRadioState() missing! 
    Hope this is enough information for anyone of you in order to suggest any solution. As I could see from previous threads some of you experienced similar problems in the past and could fix them somehow. However I couldn't find anyone with exactly the same problem.
    Thanks much in advance for any advice you might have.
    Flo

    Hi
    I have this problem also with my Lenovo 3000 V200.
    Sometimes when I boot up the PC it will connect to the network and everything works just fine.
    At other times, after boot, the "wireless stack initialization failed, error code: 118" problem occurs
    and the only way to solve it seems to be a PC restart. Nothing else I do will bring the network up.
    If I study the Networking tab in Task Manager it indicates that no adapters are available (wired eth.
    access also fails). At a few occations connectivity have failed alltogether (i.e. a reboot have not solved
    the problem). Last time this occured I had to reinstall the complete system (from a previous backup)
    to get networking up.
    I have tried different versions of Access Connections (5.02, 5.12, 5.21) and the same problem occurs
    at seemingly random instances in time. This is obviosly a problem with the Access Connections software
    since the Wireless networking works fine when I let windows manage it...
    Anyone with a fix?
    /Fredrik

  • Error code 265: The certificate chain was issued by an authority that is not trusted.

    We are in the process of trying to set up a wireless network that uses NPS servers to authenticate domain users with computers that are not on our domain (BYOD).
    We are using a valid, wildcard SSL (with intermediate certificates) to authenticate via PEAP.  The certificate was issued by Godaddy.
    When trying to connect, we are getting the authentication request.
    The result of a connection attempt is no connection with an event log error code of - “265: The certificate chain was issued by an authority that is not trusted.”
    We have tried ensuring that the certificates are in the correct containers on the respective NPS servers: “Certificates\Personal\Certificates” With the intermediate certificates located: “Certificates/Intermediate Certification Authorities”
    All these attempts have proven fruitless.  Any assistance or direction would be very much appreciated.

    Hi,
    Do you import the intermediate certificate in the right account? It should be imported in the Computer Account.
    Have you imported the intermediate certificate in your client? Client need it to validate the certificate of your NPS server.
    Here is a similar thread in which Greg has explained this issue in detail.
    http://social.technet.microsoft.com/Forums/en-US/b770fcf6-d1e9-4aac-9005-62cb5ff6d485/the-certificate-chain-was-issued-by-an-authority-that-is-not-trusted?forum=winserverNAP
    Hope this helps.
    Steven Lee
    TechNet Community Support

  • Re: Cd/DVD drive issue - error code 39 on Satellite P series

    Hi,
    This is my first request for help.
    My CD/DVD drive is no longer recognized and when I go to Device Manager and click on CD/DVD I am informed that the file cdrom.sys is there but cannot be loaded.
    An error number 39 is reported.
    Any advice would be greatly appreciated but please keep it simple to one line actions if possible.

    Of course you can get some advices ;)
    I think you would find it faster if you would search in the forum firstly but I will try to help you too.
    There error code 39 is very common issue and can be solved easy;
    Check this MS knowledge base article:
    http://support.microsoft.com/kb/314060/en-us
    So firstly remove the CD/DVD drive from the device manager.
    Then access the registry using the regedit command and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Reboot the notebook and wait till the CD/DVD drive was installed again.
    Thats it. ;)

  • Secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) PLEASE HELP ME!!

    I have gone to this website almost everyday for years and I have not changed anything in my internet settings, but now I'm getting this message: secure connection failed: The Certifying Authority for this certificate is not permitted to issue a certificate with this name. (Error code: sec_error_cert_not_in_name_space) The only thing I KNOW I did differently, was I installed a CAC reader to my computer, since then, this has been happening. Is there a setting I can change?? E-mail is: [email protected] Thanks! Megan

    There were recently several users getting this error code who use AVAST 2015. If you recently got that program, please see:
    * [https://support.mozilla.org/questions/1029578 Can NOT access https://www.google.com for google voice, mail etc.]
    * [https://support.mozilla.org/questions/1028985 Avast Forum connection failed - works in Chrome etc.]
    * [https://support.mozilla.org/questions/1028190 Since last FF update I can't sign out of Yahoo and when I close FF it tells me it has crashed.]

  • (error code -50). Has anyone else dealt with this issue?

    When I try to copy something from my desktop to an external hard drive I keep getting this message: The operation can’t be completed because an unexpected error occurred (error code -50). Has anyone else dealt with this issue?

        That is a pretty strange message. Have you had a chance to reach out to Windows Live?
    TamaraH_VZW
    Follow us on Twitter @VZWSupport

  • Error code 2324, what is this and how does one fix the issue?, error code 2324, what is this and how does one fix the issue?, error code 2324, what is this and how does one fix the issue?

    How does one fix error code 2324 that I receive each time I attempt to upgrade my iTunes.  Of course now iTunes will not work until this issue is fixed.  Thanks, D

    Let's try the fixit from the following Microsoft document with that one:
    Fix problems with programs that can't be installed or uninstalled

  • Photoshop Camera Raw 7.4 Update  is not installing because of Error Code U43M1D207. What needs to be done to resolve this error code issue?

    Photoshop Camera Raw 7.4 update is not installing because of error code U43M1D207.  What needs to be done to resolve this issue?

    If you need to post again, please keept the following in mind:
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Error code 0x8002006e burn issue

    Hi, I have read all the threads on this issue and no answer.
    Apparently this is happening a lot. I have burned one cd-r that worked on my new mac pro, (month old) and now I cannot burn anymore without the error code 0x8002006e unable to verify. I can although reinsert the disk and it will read and can open random files, but who trusts a disk with errors??
    I have shut down all programs to burn the disk and have restarted my finder.
    I've used Sony CD-R's and Memorex DVD-R which both worked fine on Tiger on my other computer,my pc dell laptop and my external duplicator.
    Running 10.5.2 all updated installed.
    I have wasted about 7 cd-r / dvd-r both. I have the standard superdrive from apple, and I have installed a pioneer from an old imac g4, (apple techs said it was compatible), and received the error in both drives. I can burn via my external lightscribe duplicator and it works great.
    Apple doesn't reopen until Monday and hopefully it's an issue that can be resolved now.
    Any suggestions would be wonderful!!! Unfortunately the nearest Apple store is 2 hours away

    I'm having this problem with CD-Rs on my new iMac. So far 3 good burns from the Finder against 5 bad. The first 4 failures died with 0x8002006E and the most recent with "Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022)". Visually all the burns failed with about the same amount of the diskwritten. The DiscRecording.log visible in the Console app shows the writes failing at the same spot (except for the first which is a nonsense number):
    +Finder: Write (10), block: 4294967146, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94240, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94080, count: 32 -> 3/0C/00 Medium Error, Write error+
    +Finder: Write (10), block: 94144, count: 32 -> 3/0C/00 Medium Error, Write error+
    The last failure showed this:
    +Finder: Burn sense: 4/09/01 Hardware Error, Tracking servo failure+
    +Finder: Burn error: 0x80020022 The device failed to respond properly, unable to recover or retry.+
    Which is beginning to look like a hardware or firmware failure (some other forums seem to suggesting that the problem started with a firmware upgrade). I'll be checking with Apple support directly.
    One other oddity, I've tried selecting 8x burn speed - the default is 24x - but DiscRecording.log records this in every case:
    +Finder: Requested burn speed was max, actual burn speed is 24x.+
    For the record I'm not using a particularly reputable brand of media (Infiniti's from www.medea.co.uk, bought locally) because I thought I'd start with the cheap ones and work up. Messages in this forum and others suggest that the 0x8002006e problem occurs with all brands of media so I'm not confident that upgrading would fix the problem.
    Sam

Maybe you are looking for