Error Code: AIP: 50080: Exchange protocol identification error
Hi,
I have setup a business action to process EDI X12 850 (PO) document version 4010 over EDI X12 over Internet - HTTP. To simulate the Trading Partner sending the EDI data to us I have developed a test.html page to submit the EDI data. The test.html does a http post to the b2b/transportServlet. When I do this I get the following error:
AIP: 50080 Exchange protocol identification errorMy Business Action
setup look like this:
BUSINESS ACTION:
Create Business Action : Review for 850
Business Protocol : EDI X12 over Internet
Process Protocol : B2B
Process Protocol Revision : B2B Process - 1.0
General
Name :Process_850
Revision :1.0
Document Protocol Revision
Name :X12_4010
Revision :4010
Document Type
Document Type :850
Document Definition :850_Def
Create Business Action : Review
Business Protocol :EDI X12 over Internet
Process Protocol :B2B
Process Protocol Revision :B2B Process - 1.0
General
Name :Process_997
Revision :1.0
Document Protocol Revision
Name :X12_4010
Revision :4010
Document Type
Document Type :997
Document Definition :997_Def
Create Trading Partner : Review
General
Name :ACME
Operational Capability
Business Protocol :EDI X12 over Internet
Business Action :Process_850
Use Default Document Protocol Parameters :false
Use Default Document Definition :true
Communication Capability
Delivery Channel :ACME_X12_DC
Document Exchange :ACME_X12_DocEx
Exchange Protocol Revision :AS2 - 1.1
Transport :ACME_X12_Transport
Transport Protocol :HTTP
Transport Server :ACME_X12_Transport_Server
Trading Partner :ACME
Business Protocol :EDI X12 over Internet
Details
Business Action :Process_997 - Responder
Is Initiator :false
Functional acknowledgement required? :false
Is acknowledgement handled by Integration B2B? :true
Document Information
Document Protocol :EDI_X12
Document Protocol Revision :X12_4010
Document Type :997
Document Definition
Document Protocol Parameters
Name Value
Interchange Time #SystemTime(HHMM)#
Interchange ecs File
Security Information Qualifier 00
Security Information
Authorization Information
[ Application Receiver's Code ] ACME
Interchange Control Standard/Repetition Separator U
Segment Delimiter 0x27
Interchange Date #SystemDate(YYMMDD)#
Authorization Information Qualifier 00
[ Application Sender's Code ] ACME
ImplementationClass oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin
[ Interchange Sender ID Qualifier ] ZZ
Replacement Character 0x7c
Subelement Delimiter 0x2b
Interchange Control Version Number 00200
[ Interchange Sender ID ] ACME
[ Interchange Receiver ID Qualifier ] ZZ
Tag Delimiter 0x3d
Usage Indicator P
[ Interchange Receiver ID ] ACME
Version/Release/Industry Identifier Code
Component Element Separator 0x2b
Decimal Separator 0x2e
Functional Group Time #SystemTime(HHMM)#
Responsible Agency Code X
Functional Group Date #SystemDate(CCYYMMDD)#
Group ecs File
Element Delimiter 0x7e
Create Trading Partner : Review
General
Trading Partner :GLOBALCHIPS
Communication Capability
Delivery Channel :GLOBALCHIPS_X12_DOC
Document Exchange :GLOBALCHIPS_X12_DocEx
Exchange Protocol Revision :AS2 - 1.1
Transport :GLOBALCHIPS_X12_Transport
Transport Protocol :HTTP
Transport Server :GLOBALCHIPS_X12_Transport_Server
Confirmation
Trading partner participant successfully added.
Agreement Details: X12_Agreement
Details
Agreement Id X12_1001
Description
Effective From Date
Effective To Date
Invocation Limit
Concurrent Conversations
Trading Partner Participants
ACME - Process_850 - Initiator
GLOBALCHIPS - Process_850 - Responder
GLOBALCHIPS - Process_997 - Initiator
ACME - Process_997 - Responder
If I tried to use enq_850 I am getting the following error:
AIP-50547 : Trading partner agreement not found for the given input values: From party[NAME] "GLOBALCHIPS", To party[NAME] "GLOBALCHIPS", Business action name "Process_850"; also verify agreement effectiveToDate
Hi Ramesh,
I have created Internal Deliver Channel as File Inbound for the Host Trading Partner and at the time of creating the agreement between the partners I have selected this channel.
And I am keeping the EDI document in the end point folder. I am giving the file name as XXX_850_4010_1_12345.dat.
Now I am not getting General validation error. This time I am getting the below error.
Please Let me know If my approch is correct?
Error Brief :
5000: Parser error - Missing trailer.
5042: Parser error - No matching parser schema was found.
Error Brief :
5000: Parser error - Missing trailer.
5042: Parser error - No matching parser schema was found.
iAudit Report :
<?xml version="1.0" encoding="UTF-16"?><AnalyzerResults Guid="{BACD5C1A-90BE-4D6D-8F48-97E66EE909B6}" InterchangeReceived="1" InterchangeProcessed="1" InterchangeAccepted="0"> <ExecutionDate>Friday, January 12, 2007</ExecutionDate> <ExecutionTime>02:26:40 PM (India Standard Time)</ExecutionTime> <AnalyzerReturn>Failed</AnalyzerReturn> <NumberOfErrors>2</NumberOfErrors> <ErrorByCategory> <Category Name="Rejecting"> <Severity Name="Normal">2</Severity> </Category> </ErrorByCategory> <Status>Finished</Status> <DataFile> <FilePath>D:\OraASRel2\ip</FilePath> <FileName/> <LastModified/> <FileSize/> <DataURL>file:\\D:\OraASRel2\ip</DataURL> </DataFile> <Interchange Guid="{A87B69C1-43E3-423B-AA44-9F0C3BE37CF3}" InterchangeAckCode="R" FunctionalGroupReceived="1" FunctionalGroupProcessed="1" FunctionalGroupAccepted="0" RError="1" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>951</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="InterchangeSenderQual">ZZ</Link> <Link Name="InterchangeSenderID">BLUECHIPS </Link> <Link Name="InterchangeReceiverQual">12</Link> <Link Name="InterchangeReceiverID">colourchips </Link> <Link Name="InterchangeControlVersion">00300</Link> <Link Name="Standard">X12</Link> </Links> <Properties> <Property Name="InterchangeAuthorizationInfoQual">00</Property> <Property Name="InterchangeAuthorizationInfo"> </Property> <Property Name="InterchangeSecurityInfoQual">00</Property> <Property Name="InterchangeSecurityInfo"> </Property> <Property Name="InterchangeSenderQual">ZZ</Property> <Property Name="InterchangeSenderID">BLUECHIPS </Property> <Property Name="InterchangeReceiverQual">12</Property> <Property Name="InterchangeReceiverID">colourchips </Property> <Property Name="InterchangeDate">061207</Property> <Property Name="InterchangeTime">1601</Property> <Property Name="InterchangeControlStandard_RepeatingSeparator">U</Property> <Property Name="InterchangeControlVersion">00300</Property> <Property Name="InterchangeControlNumber">000050524</Property> <Property Name="InterchangeAckRequested">1</Property> <Property Name="InterchangeUsageIndicator">P</Property> <Property Name="InterchangeComponentElementSep">0x2a</Property> <Property Name="DecimalSeparator"/> <Property Name="ElementDelimiter">0x7e</Property> <Property Name="ReleaseCharacter"/> <Property Name="RepeatingSeparator"/> <Property Name="SegmentDelimiter">0x2b0xd0xa</Property> <Property Name="SubelementDelimiter">0x2a</Property> </Properties> </NodeInfo> <FunctionalGroup Guid="{BF922FB1-9661-462C-B5A6-D868869A8C79}" FunctionalGroupAckCode="R" TransactionSetsIncluded="1" TransactionSetsReceived="1" TransactionSetsProcessed="1" TransactionSetsAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>108</StartPos> <Size>843</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="GroupSenderID">BLUECHIPS</Link> <Link Name="GroupReceiverID">colourchips</Link> <Link Name="GroupVersionNumber">004010</Link> </Links> <Properties> <Property Name="GroupID">PO</Property> <Property Name="GroupSenderID">BLUECHIPS</Property> <Property Name="GroupReceiverID">colourchips</Property> <Property Name="GroupDate">20061207</Property> <Property Name="GroupTime">1601</Property> <Property Name="GroupControlNumber">150524</Property> <Property Name="GroupAgencyCode">X</Property> <Property Name="GroupVersionNumber">004010</Property> <Property Name="GroupChildCount">1</Property> <Property Name="GroupTrailerControlNumber">150524</Property> </Properties> </NodeInfo> <Transaction Guid="{367C24CC-9747-4E49-9F02-AFC4295CF850}" TransactionAckCode="R" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>171</StartPos> <Size>766</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="TransactionID">850</Link> </Links> <Properties> <Property Name="TransactionID">850</Property> <Property Name="TransactionControlNumber">158192</Property> <Property Name="TransactionImplementationReference"/> <Property Name="TransactionChildCount">26</Property> <Property Name="TransactionTrailerControlNumber">158192</Property> </Properties> </NodeInfo> </Transaction> </FunctionalGroup> <InterchangeErrors> <Error ErrorCode="{03942C04-7909-4DFB-8F7D-6E5B3D8BDF48}" Severity="Normal" Category="Rejecting" Index="1" ID="50000200"> <ErrorBrief>5000: Parser error - Missing trailer.</ErrorBrief> <ErrorMsg>The Interchange Trailer is missing. The segment itself may be missing or the Segment Delimiter may be missing.{br}{br}Trailer was expected after:{br}{tab}Character: 952 </ErrorMsg> <ErrorObjectInfo> <Parameter Name="ErrorLevel">1</Parameter> <Parameter Name="Name">Parser</Parameter> <Parameter Name="_ec_CaseID">02</Parameter> <Parameter Name="_ec_dn_guid_">{A87B69C1-43E3-423B-AA44-9F0C3BE37CF3}</Parameter> <Parameter Name="_ec_start_pos_">952</Parameter> <Parameter Name="ec_error_scope">File</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <Part3/> <DataXPointer> <StartPos>952</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </InterchangeErrors> </Interchange> <AnalyzerErrors> <Error ErrorCode="{9EE55FDF-8668-4499-9F2E-D9247519A850}" Severity="Normal" Category="Rejecting" Index="2" ID="50420000"> <ErrorBrief>5042: Parser error - No matching parser schema was found.</ErrorBrief> <ErrorMsg>The data starting at position 951 is not a valid EDI interchange. The remainder of the data file was ignored.</ErrorMsg> <ErrorObjectInfo> <Parameter Name="ErrorLevel">0</Parameter> <Parameter Name="Name">Parser</Parameter> <Parameter Name="_ec_start_pos_">951</Parameter> <Parameter Name="ec_error_scope">File</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <ErrData/> <Part3/> <DataXPointer> <StartPos>951</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </AnalyzerErrors></AnalyzerResults>
2007.01.12 at 14:26:40:779: Thread-12: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:2403)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1263)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:1845)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1777)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1735)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:455)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:327)
at java.lang.Thread.run(Thread.java:534)
Thanks
Raghu
Similar Messages
-
Document protocol identification error
Hi While receving Shipment from our trading partner, it showing below error in b2b, Please help me in resolving this? We are suing Custom document over internet.
Machine Info: (essaps000-u008.emrsn.com)
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2574)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2444)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2399)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2009.09.15 at 10:31:07:504: Thread-30: B2B - (DEBUG) MimePackaging:unpack:Exit
2009.09.15 at 10:31:07:504: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2009.09.15 at 10:31:07:504: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:decodeIncomingMessage Enter
2009.09.15 at 10:31:07:504: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:decodeIncomingMessage Number of Components = 1
2009.09.15 at 10:31:07:504: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:decodeIncomingMessage compInfoList[k].getValue().toLowerCase()==>text/plain
2009.09.15 at 10:31:07:504: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:decodeIncomingMessage Components List= [Loracle.tip.adapter.b2b.packaging.ComponentInfo;@4fa23a
2009.09.15 at 10:31:07:505: Thread-30: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: null Type: AS2 Identifier Value: BENCHQA
2009.09.15 at 10:31:07:505: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:decodeIncomingMessage File Name=>null
2009.09.15 at 10:31:07:505: Thread-30: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: AS2 Identifier Value: EMRSNS
2009.09.15 at 10:31:07:505: Thread-30: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: null Type: AS2 Identifier Value: BENCHQA
2009.09.15 at 10:31:07:505: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:decodeIncomingMessage:Payload <?xml version="1.0" encoding="utf-8"?><ShowShipment releaseID="9.0" systemEnvironmentCode="Production" languageCode="en-US" xmlns:ns6="http://www.openapplications.org/oagis/9/IANAMIMEMediaTypes:2003" xmlns:ns0="http://www.openapplications.org/oagis/9/unqualifieddatatypes/1.1" xmlns:ns1="http://www.openapplications.org/oagis/9/qualifieddatatypes/1.1" xmlns:ns5="http://www.openapplications.org/oagis/9/currencycode/54217:2001" xmlns:ns3="http://www.openapplications.org/oagis/9/languagecode/5639:1988" xmlns:ns2="http://www.openapplications.org/oagis/9/codelists" xmlns:ns4="http://www.openapplications.org/oagis/9/unitcode/66411:2001" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ApplicationArea>
<Sender>
<LogicalID>SCN024538</LogicalID>
<ComponentID>SHIPMENT</ComponentID>
<TaskID>SHOW</TaskID>
<ReferenceID>TSI20090914000000000000000000000002</ReferenceID>
<ConfirmationCode>Never</ConfirmationCode>
<AuthorizationID>160</AuthorizationID>
</Sender>
<CreationDateTime>2009-09-15T11:11:21</CreationDateTime>
</ApplicationArea>
<DataArea>
<Show>
<OriginalApplicationArea>
<Sender>
<LogicalID>EMR1601000</LogicalID>
</Sender>
<CreationDateTime>2009-09-15T11:11:21</CreationDateTime>
</OriginalApplicationArea>
</Show>
<Shipment>
<ShipmentHeader>
<DocumentID xsi:type="ItemIDType">
<ID>TSI543897</ID>
</DocumentID>
<DocumentDateTime>20090914</DocumentDateTime>
<DocumentReference type="WayBillAirBill">
<DocumentID>TTSA021720000001</DocumentID>
</DocumentReference>
<DocumentReference type="BillOfLading">
<DocumentID>BTSA02172000002</DocumentID>
</DocumentReference>
<DocumentReference type="PackingSlip">
<DocumentID>TSI543897</DocumentID>
</DocumentReference>
<Attachment inline="false">
</Attachment>
<ActualShipDateTime>20090914</ActualShipDateTime>
<ScheduledDeliveryDateTime>20091012</ScheduledDeliveryDateTime>
<ShipFromParty>
<PartyIDs>
<ID>501V00041757</ID>
</PartyIDs>
<Name>BENCHMARK ELECTRONICS THAILAND</Name>
<Location>
<ID>160234567</ID>
</Location>
</ShipFromParty>
</ShipmentHeader>
<ShipmentItem>
<ItemID>
<ID>166806G1</ID>
<RevisionID>
</RevisionID>
</ItemID>
<SupplierItemID>
<ID> EML166806G1</ID>
</SupplierItemID>
<Description>ASSY GROUND CURRENT DETECTOR</Description>
<ShippedQuantity unitCode="EA">20</ShippedQuantity>
<PurchaseOrderReference>
<DocumentID xsi:type="DocumentIDType">
<ID>501LBR295816</ID>
</DocumentID>
<ReleaseNumber>
</ReleaseNumber>
<LineNumber>001</LineNumber>
<ScheduleLineNumber>1 </ScheduleLineNumber>
</PurchaseOrderReference>
</ShipmentItem>
</Shipment>
</DataArea>
</ShowShipment>
2009.09.15 at 10:31:07:506: Thread-30: B2B - (DEBUG) calling setMode() changing from -1 to 2
2009.09.15 at 10:31:07:511: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.as2.AS2ExchangePlugin:AS2ExchangePlugin:decodeIncomingMessage Exit
2009.09.15 at 10:31:07:512: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
2009.09.15 at 10:31:07:512: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP EMRSNS
2009.09.15 at 10:31:07:512: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
2009.09.15 at 10:31:07:512: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
2009.09.15 at 10:31:07:512: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
2009.09.15 at 10:31:07:512: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
2009.09.15 at 10:31:07:513: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
2009.09.15 at 10:31:07:513: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
2009.09.15 at 10:31:07:515: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
2009.09.15 at 10:31:07:515: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
2009.09.15 at 10:31:07:515: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
2009.09.15 at 10:31:07:519: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
2009.09.15 at 10:31:07:519: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = false
2009.09.15 at 10:31:07:519: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
2009.09.15 at 10:31:07:520: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2009.09.15 at 10:31:07:520: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@23ce9f
2009.09.15 at 10:31:07:597: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument errcode = Execute failed - CECToolsException thrown - HRESULT[650007], description[The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons: A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect.]
2009.09.15 at 10:31:07:598: Thread-30: B2B - (ERROR) com.edifecs.shared.jni.JNIException: Execute failed - CECToolsException thrown - HRESULT[650007], description[The data in the file could not be parsed. Please check the file to verify that it is valid and formatted correctly. This error can occur for one of the following reasons: A) The data file may be a Word document or have some other binary format. B) The envelope data may not be formatted properly. If this is an X12 data file, please verify that the ISA segment is the correct size (exactly 106 characters). If this is an EDIFACT data file, it must have either a UNA or begin with UNB. For other standards, verify that the envelope segments conform to the specified rules. C) The segment/record delimiters in the file are incorrect.]
at com.edifecs.shared.jni.xdata.INativeToXData.ExecuteNative(Native Method)
at com.edifecs.shared.jni.xdata.INativeToXData.Execute(Unknown Source)
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.identifyIncomingDocument(EDIDocumentPlugin.java:370)
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3226)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2574)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2444)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2399)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2009.09.15 at 10:31:07:598: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument Enter
2009.09.15 at 10:31:07:657: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2009.09.15 at 10:31:07:658: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2009.09.15 at 10:31:07:658: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument continuing
2009.09.15 at 10:31:07:658: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2009.09.15 at 10:31:07:658: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2009.09.15 at 10:31:07:658: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
2009.09.15 at 10:31:07:658: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
2009.09.15 at 10:31:07:659: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2009.09.15 at 10:31:07:659: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2009.09.15 at 10:31:07:659: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument continuing
2009.09.15 at 10:31:07:659: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2009.09.15 at 10:31:07:659: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2009.09.15 at 10:31:07:659: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
2009.09.15 at 10:31:07:660: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
2009.09.15 at 10:31:07:660: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument non-XML Payload
2009.09.15 at 10:31:07:660: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument iDoc ECS = null
2009.09.15 at 10:31:07:660: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get start pos
2009.09.15 at 10:31:07:660: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument could not get end pos
2009.09.15 at 10:31:07:661: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:identifyIncomingDocument Exit
2009.09.15 at 10:31:07:662: Thread-30: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2574)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2444)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2399)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2009.09.15 at 10:31:07:662: Thread-30: B2B - (ERROR) Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2574)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2444)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2399)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2009.09.15 at 10:31:07:662: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2009.09.15 at 10:31:07:662: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2009.09.15 at 10:31:07:663: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50083: Document protocol identification error
2009.09.15 at 10:31:07:663: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2009.09.15 at 10:31:07:665: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {CONTENT-TRANSFER-ENCODING=binary, CONNECTION=Keep-Alive, AS2-FROM=BENCHQA, CONTENT-TYPE=application/pkcs7-mime; smime-type=enveloped-data; name="smime.p7m", MIME-VERSION=1.0, RECEIPT-DELIVERY-OPTION=http://b2b-qa.bench.com/BenchmarkAS2Receive_QA/BTSHTTPReceive.dll, AS2-VERSION=1.1, EXPECT=100-continue, USER-AGENT=Microsoft(R) BizTalk(R) Server 2006 R2 3.0.1.0, AS2-TO=EMRSNS, CONTENT-LENGTH=5137, ORACLE-ECID=1253032264:10.236.2.145:16396:0:3376,0, MESSAGE-ID=<ANG-QA-BT01_09D55C86-117A-4E5A-90C1-03C8B96EDB2E>, HOST=emersonb2b-s.emrsn.com, B2B_SERVLET_URI_PATTERN=/b2b/transportServlet, DISPOSITION-NOTIFICATION-TO=http://b2b-qa.bench.com/BenchmarkAS2Receive_QA/BTSHTTPReceive.dll}
2009.09.15 at 10:31:07:665: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2009.09.15 at 10:31:07:665: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2009.09.15 at 10:31:07:666: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50083: Document protocol identification error
2009.09.15 at 10:31:07:666: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2009.09.15 at 10:31:07:666: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2009.09.15 at 10:31:07:666: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2009.09.15 at 10:31:07:667: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2009.09.15 at 10:31:07:667: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2009.09.15 at 10:31:07:671: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2009.09.15 at 10:31:07:684: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2009.09.15 at 10:31:07:694: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2009.09.15 at 10:31:07:694: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2009.09.15 at 10:31:07:734: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name null
2009.09.15 at 10:31:07:734: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value AS2 IdentifierEMRSNS
2009.09.15 at 10:31:07:769: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name null null
2009.09.15 at 10:31:07:815: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2009.09.15 at 10:31:07:827: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2009.09.15 at 10:31:07:828: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2009.09.15 at 10:31:07:828: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2009.09.15 at 10:31:07:830: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = <ANG-QA-BT01_09D55C86-117A-4E5A-90C1-03C8B96EDB2E>
2009.09.15 at 10:31:07:830: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
2009.09.15 at 10:31:07:841: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2009.09.15 at 10:31:07:841: Thread-30: B2B - (DEBUG) Engine:notifyApp Enter
2009.09.15 at 10:31:07:848: Thread-30: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0AEC0291123BE8B0DB800000B91B0200</b2bMessageId>
<errorCode>AIP-50083</errorCode>
<errorText>Document protocol identification error</errorText>
<errorDescription>
<![CDATA[Machine Info: (essaps000-u008.emrsn.com)
Description: Unable to identify the document protocol of the message
StackTrace:
Error -: AIP-50083: Document protocol identification error
at oracle.tip.adapter.b2b.engine.Engine.identifyDocument(Engine.java:3245)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1666)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2574)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2444)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2399)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.09.15 at 10:31:07:859: Thread-30: B2B - (DEBUG) Engine:notifyApp Exit
2009.09.15 at 10:31:07:859: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-50083: Document protocol identification error
2009.09.15 at 10:31:07:859: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2009.09.15 at 10:31:07:860: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2009.09.15 at 10:31:07:860: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2009.09.15 at 10:31:07:860: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2009.09.15 at 10:31:07:860: Thread-30: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2009.09.15 at 10:31:07:861: Thread-30: B2B - (DEBUG) DBContext commit: Enter
2009.09.15 at 10:31:07:865: Thread-30: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.09.15 at 10:31:07:865: Thread-30: B2B - (DEBUG) DBContext commit: Leave
2009.09.15 at 10:31:07:865: Thread-30: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
Edited by: user8653471 on Sep 15, 2009 10:55 PMHi Anuj,
Please set oracle.tip.adapter.b2b.edi.enablePreprocess = true in the ip/config/tip.properties file and restart the server.
Do above statement is related to EDI? I am using Custom document over internet
I did not find any unreadable/non-xml characters in the xml file, here i am attaching the xml fille.
<?xml version="1.0" encoding="utf-8"?><ShowShipment releaseID="9.0" systemEnvironmentCode="Production" languageCode="en-US" xmlns:ns6="http://www.openapplications.org/oagis/9/IANAMIMEMediaTypes:2003" xmlns:ns0="http://www.openapplications.org/oagis/9/unqualifieddatatypes/1.1" xmlns:ns1="http://www.openapplications.org/oagis/9/qualifieddatatypes/1.1" xmlns:ns5="http://www.openapplications.org/oagis/9/currencycode/54217:2001" xmlns:ns3="http://www.openapplications.org/oagis/9/languagecode/5639:1988" xmlns:ns2="http://www.openapplications.org/oagis/9/codelists" xmlns:ns4="http://www.openapplications.org/oagis/9/unitcode/66411:2001" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<ApplicationArea>
<Sender>
<LogicalID>SCN024538</LogicalID>
<ComponentID>SHIPMENT</ComponentID>
<TaskID>SHOW</TaskID>
<ReferenceID>TSI20090914000000000000000000000002</ReferenceID>
<ConfirmationCode>Never</ConfirmationCode>
<AuthorizationID>160</AuthorizationID>
</Sender>
<CreationDateTime>2009-09-15T11:11:21</CreationDateTime>
</ApplicationArea>
<DataArea>
<Show>
<OriginalApplicationArea>
<Sender>
<LogicalID>EMR1601000</LogicalID>
</Sender>
<CreationDateTime>2009-09-15T11:11:21</CreationDateTime>
</OriginalApplicationArea>
</Show>
<Shipment>
<ShipmentHeader>
<DocumentID xsi:type="ItemIDType">
<ID>TSI543897</ID>
</DocumentID>
<DocumentDateTime>20090914</DocumentDateTime>
<DocumentReference type="WayBillAirBill">
<DocumentID>TTSA021720000001</DocumentID>
</DocumentReference>
<DocumentReference type="BillOfLading">
<DocumentID>BTSA02172000002</DocumentID>
</DocumentReference>
<DocumentReference type="PackingSlip">
<DocumentID>TSI543897</DocumentID>
</DocumentReference>
<Attachment inline="false">
</Attachment>
<ActualShipDateTime>20090914</ActualShipDateTime>
<ScheduledDeliveryDateTime>20091012</ScheduledDeliveryDateTime>
<ShipFromParty>
<PartyIDs>
<ID>501V00041757</ID>
</PartyIDs>
<Name>BENCHMARK ELECTRONICS THAILAND</Name>
<Location>
<ID>160234567</ID>
</Location>
</ShipFromParty>
</ShipmentHeader>
<ShipmentItem>
<ItemID>
<ID>166806G1</ID>
<RevisionID>
</RevisionID>
</ItemID>
<SupplierItemID>
<ID> EML166806G1</ID>
</SupplierItemID>
<Description>ASSY GROUND CURRENT DETECTOR</Description>
<ShippedQuantity unitCode="EA">20</ShippedQuantity>
<PurchaseOrderReference>
<DocumentID xsi:type="DocumentIDType">
<ID>501LBR295816</ID>
</DocumentID>
<ReleaseNumber>
</ReleaseNumber>
<LineNumber>001</LineNumber>
<ScheduleLineNumber>1 </ScheduleLineNumber>
</PurchaseOrderReference>
</ShipmentItem>
</Shipment>
</DataArea>
</ShowShipment> -
Warning -: AIP-50082: Duplicated Exchange protocol message error
Hi,
I am facing this warning while sending Outbound Rosettanet messages to Oracle b2B.
Warning -: AIP-50082: Duplicated Exchange protocol message error
Even after this warning, the messages are getting exchanged with the trading partner. The B2B report shows message state as "Complete".
The issue is very similar to the following thread.
[t-701140]
I tried entering values to "b2b_event" table manually. It first says that "The row is created". However, It is not actually getting created in the table.
Can you please help me with this issue?
Regards,
Ravi ShahHi Ramesh,
Thanks a lot for your response.
The Duplicate Exchange protocol message error issue is now resolved for RNIF. You suspected the duplicate MSG_ID to be the cause and it was. Though the back-end Java stub was updating the MSG_ID, that wasn't picked up by the B2B. This resulted in the same MSG_ID from the properties file being picked up for every message.
After rectifying the back-end Java stub code, this issue was resolved and no errors were found for the nearly 500 messages that were enqueued onto the JMS. Further, the throughput was found to be 4-6 MPS on Windows Env.
Thanks again!
Warm Regards,
Suhas. -
B2B-50081 Duplicated exchange protocol message error
Hi,
I tested a scenario for ebXML inbound type. for the first time it worked correctly with no errors. i got instance created in my soa composite. but from the next time, even though i changed the input xml file name with unique message id, i'm getting the following error after acknowledgement or between the acknowledgement.
Please help me to solve the issue.
I'm naming the input xml as follows : <fromTradingPartner>_<DocumentType>_<Revision>_<msgType>_<msgId>.xml
Eg:OracleServices_ebXMLType_204_1_210820128.xml
Error
Id 7F00000113948EE1E4B000002F2BA9C9
Message Id 7F00000113948EE1E26000002F2BA9C5
Refer To Message Refer To Message
Sender Type
Sender Value
Receiver Type Name
Receiver Value MarketInc
Sender
Receiver MarketInc
Agreement Id
Agreement
Document Type
Document Protocol
Document Version
Message Type REQ
Direction INBOUND
State MSG_ERROR
Acknowledgement Mode NONE
Response Mode ASYNC
Send Time Stamp 08/21/2012 04:55:28 PM
Receive Time Stamp 08/21/2012 04:55:28 PM
Document Retry Interval(Channel) 0
Document Remaining Retry(Channel) 0
Document Retry Interval(Agreement)
Document Remaining Retry(Agreement)
Native Message Size 0
Translated Message Size
Business Action Name
Business Transaction Name
Xpath Name1
Xpath Value1
Xpath Expression1
Xpath Name2
Xpath Value2
Xpath Expression2
Xpath Name3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
Correlation To XPath Value
Correlation To XPath Expression
Wire Message Wire Message
Application Message Application Message
Payload Storage Payload Storage
Attachment Attachment
Label
Collaboration Id
Collabration Name
Collabration Version
Business Action Name
Exchange Protocol Name Generic HTTP
Exchange Protocol Version 1.1
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code B2B-50081
Error Description Machine Info: (localhost.localdomain) Description: Duplicated exchange protocol message error - Original B2BMessageId = 7F00000113948EE1D1B000002F2BA9BF
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text Duplicated exchange protocol message errorI tried simple ebXML inbound use case only.
1.I created custom ebXML 2.0 document definition
2.created eBMS Channel for remote TP.
3.created Generic File Channel for host TP
3.created an agreement in the remote TP with these two channels and the document definition
4.Created a soa project in the jdeveloper with B2B adapter as sender(inbound), mediator to transform the xml to opaque(for .dat format) and then a JMS adapter as producer to put the the .dat file.
I tried this in 2 different ways:
If i configured the agreement without using the host channel (no channel for host and ebms channel for remote), instance for soa is been created with error since it is unable to convert to opaque format.
If i configured the agreement using the host channel (file channel for host and ebms channel for remote), no instance is been created in the soa but i can able to see the .dat file in the file channel's folder.In the reports page, msg and ack are generated correctly with one more error "duplicated protocol error".
Please help. -
Duplicated exchange protocol message error on Remote TP implement Sync Res
I am (MyCompany) send the business message and receive the corresponding business response from remote TP, but got error as the following,
Error Code B2B-50081
Error Description Machine Info: ( Acme) Description: Duplicated exchange protocol message error - Original B2BMessageId = C0A802111322965DEA30000050D092D0-1
I need your help!
Regards,
SanAnuj,
this is message id send to remote TP
Id C0A80211132296566E80000050D091E0
Message Id C0A80211132296564FA0000050D09120
Business Message C0A80211132296566D80000050D09170
Packed Message Packed Message
Payload Payload
Protocol Message Id @C0A80211132296566E10000050D091A0
Refer To Protocol Message Id
Protocol Collaboration Id @C0A80211132296566E10000050D091A0
Protocol Transport Binding SOAPAction="ebXML" http.sync=true timeout=300000 Content-Type=multipart/related;type="text/xml";boundary="----=_Part_65_1555520695.1314954503907";start="<ebxheader-C0A80211132296566E00000050D09190>" Content-Length=2483
Message Digest Message Digest
Digest Algorithm
Transport Protocol HTTP
Transport Protocol Version 1.1
And message id received from remote TP
Id C0A802111322965DE260000050D09280
Message Id C0A802111322965DE260000050D09280
Business Message C0A802111322965DEA40000050D092E0
Packed Message Packed Message
Payload Payload
Protocol Message Id M1314954587133.5826024@tcgws02_te4502442803846285853
Refer To Protocol Message Id @C0A80211132296566E10000050D091A0
Protocol Collaboration Id @C0A80211132296566E10000050D091A0
Protocol Transport Binding SOAPAction="ebXML" User-Agent=haboob/5.5.1.0.1 build-2636 Host=xx.xx.xx.xx:xxxx Content-Type=multipart/related; type="text/xml"; boundary="----=_Part_30558_29196552.1314954587139" Connection=close Content-Length=3237 MSG_RECEIVED_TIME=Fri Sep 02 16:08:54 ICT 2011
Message Digest Message Digest
Digest Algorithm
Transport Protocol HTTP
Transport Protocol Version 1.1
Thanks for your help.
San
Edited by: user7914871 on ๓ ก.ย. ๒๕๕๔, ๑๑:๔๙ น.
Edited by: 7914871 on ๕ ก.ย. ๒๕๕๔, ๑๔:๑๓ น. -
Rosettanet--document protocol identification error
Hi guys,
i am trying inbound operation using oracle Rosettanet standard(3a4) i have taken PO request XSD and Input XML from Oracle sample Rosettanet-004 i am getting document protocol identification error i have changed the GlobalBusinessIdentifier value for buyer and seller according to my duns values. Still any values i have to change?
can any one help on this?
thanks in advance...Hi,
Here is my wire message payload..
*<?xml version="1.0" encoding="UTF-8"?>*
*<Pip3A4PurchaseOrderRequest xmlns="http://www.edifecs.com/RosettaNet/100PO">*
*<fromRole>*
*<PartnerRoleDescription>*
*<ContactInformation>*
*<contactName>*
*<FreeFormText>Kerri Makela</FreeFormText>*
*</contactName>*
*<EmailAddress>Not Available</EmailAddress>*
*<telephoneNumber>*
*<CommunicationsNumber>4805521413</CommunicationsNumber>*
*</telephoneNumber>*
*</ContactInformation>*
*<GlobalPartnerRoleClassificationCode>Buyer</GlobalPartnerRoleClassificationCode>*
*<PartnerDescription>*
*<BusinessDescription>*
*<GlobalBusinessIdentifier>927775478</GlobalBusinessIdentifier>*
*<GlobalSupplyChainCode>Electronic Components</GlobalSupplyChainCode>*
*</BusinessDescription>*
*<GlobalPartnerClassificationCode>End User</GlobalPartnerClassificationCode>*
*</PartnerDescription>*
*</PartnerRoleDescription>*
*</fromRole>*
*<GlobalDocumentFunctionCode>Request</GlobalDocumentFunctionCode>*
*<PurchaseOrder>*
*<AccountDescription>*
*<accountName>*
*<FreeFormText>INTEL CORP</FreeFormText>*
*</accountName>*
*<AccountNumber>035219007</AccountNumber>*
*<billTo>*
*<PartnerRoleDescription>*
*<ContactInformation>*
*<PhysicalAddress>*
*<addressLine1>*
*<FreeFormText>ACCOUNTS PAYABLE</FreeFormText>*
*</addressLine1>*
*<addressLine2>*
*<FreeFormText>P.O. Box 1000</FreeFormText>*
*</addressLine2>*
*<cityName>*
*<FreeFormText>Hillsboro</FreeFormText>*
*</cityName>*
*<GlobalCountryCode>US</GlobalCountryCode>*
*<GlobalLocationIdentifier>0478978550001</GlobalLocationIdentifier>*
*<NationalPostalCode>97123-100</NationalPostalCode>*
*<regionName>*
*<FreeFormText>OR</FreeFormText>*
*</regionName>*
*</PhysicalAddress>*
*</ContactInformation>*
*<GlobalPartnerRoleClassificationCode>Payer</GlobalPartnerRoleClassificationCode>*
*<PartnerDescription>*
*<BusinessDescription>*
*<GlobalBusinessIdentifier>047897855</GlobalBusinessIdentifier>*
*<businessName>*
*<FreeFormText>INTEL CORP</FreeFormText>*
*</businessName>*
*</BusinessDescription>*
*</PartnerDescription>*
*</PartnerRoleDescription>*
*</billTo>*
*</AccountDescription>*
*<comments>*
*<FreeFormText>THIS PURCHASE ORDER CONFORMS TO THE TERMS AND__CONDITIONS SET FORTH IN CONTRACT. THE PARTIES HEREBY AGREE__TO AMEND SAID CONTRACT, FOR THIS ORDER ONLY, BY INCORPORATING THE NON__CONFLICTING TERM BELOW:__PARTIAL SHIPMENTS WILL NOT BE ACCEPTED. SHIP COMPLETE__PLEASE CONFIRM THIS ORDER BY SIGNING ON THE SIGNATURE__LINE BELOW AND RETURNING A COPY TO BUYER.__SIGNATURE DATE__THE TOOL ID, PURCHASE ORDER NUMBER, LINE ITEM AND__RELEASE, CRATE/BOX OF WILL BE ON THE PACKING SLIP__ATTACHED TO THE BILL OF LADING AND WRITTEN OR STAMPED__ON EACH CRATE/BOX OR CRATES/BOXES. THE TOOL ID,__PURCHASE ORDER, LINE ITEM AND RELEASE, WILL BE ON EACH__INVOICE TO ENSURE PROMPT AND CORRECT PAYMENT__SHIP VIA:__UVL REPRESENTATIVE AT 800-716-6625 OR__FAX: 602-470-0345__Danzas-AEI REPRESENTATIVE: GREGG TEUNISSEN:(31)(20)316-9754 OR FAX:__(31)(20)316-9898__KWE REPRESENTATIVE ICHIRO FURUSAWA:(81)(3)5443-4510 OR__FAX: (81)(3)5443-4515__SELLER WILL PROVIDE THE CARRIER WITH THE FOLLOWING INFORMATION:__PURCHASE ORDER NUMBER, LINE ITEM NUMBER AND RELEASE__NUMBER, TOOL IDENTIFIER FOR EACH PART NUMBER, TOOL__IDENTIFIER FOR EACH SYSTEM TO BE SHIPPED, DATE AND TIME__THE SYSTEM(S) WILL BE AVAILABLE FOR PICKUP; AND__CONFIRMATION OF THE PIECES, DIMENSIONS AND WEIGHTS TO__BE INCLUDED.__.</FreeFormText>*
*</comments>*
*<FinancingTerms>*
*<GlobalFinanceTermsCode>Bank transfer</GlobalFinanceTermsCode>*
*<PaymentTerms>*
*<GlobalPaymentConditionCode>Acceptance</GlobalPaymentConditionCode>*
*<netTermsDays>*
*<CountableAmount>0</CountableAmount>*
*</netTermsDays>*
*<percentDue>*
*<PercentAmount>20</PercentAmount>*
*</percentDue>*
*</PaymentTerms>*
*</FinancingTerms>*
*<GlobalPurchaseOrderTypeCode>Standard</GlobalPurchaseOrderTypeCode>*
*<isDropShip>*
*<AffirmationIndicator>No</AffirmationIndicator>*
*</isDropShip>*
*<ProductLineItem>*
*<comments>*
*<FreeFormText>.</FreeFormText>*
*</comments>*
*<GlobalProductUnitOfMeasureCode>Each</GlobalProductUnitOfMeasureCode>*
*<isDropShip>*
*<AffirmationIndicator>No</AffirmationIndicator>*
*</isDropShip>*
*<LineNumber>0010</LineNumber>*
*<OrderQuantity>*
*<requestedQuantity>*
*<ProductQuantity>1</ProductQuantity>*
*</requestedQuantity>*
*</OrderQuantity>*
*<OrderShippingInformation>*
*<CarrierInformation>*
*<GlobalCarrierCode>UVLN</GlobalCarrierCode>*
*</CarrierInformation>*
*<GlobalFreeOnBoardCode>Origin</GlobalFreeOnBoardCode>*
*<GlobalShipmentTermsCode>Collect</GlobalShipmentTermsCode>*
*<GlobalShippingServiceLevelCode>Premium Surface</GlobalShippingServiceLevelCode>*
*<SpecialHandlingInstruction>*
*<specialHandlingText>*
*<FreeFormText>Carrier Name : UVL Capital - Fob Text: EXW Amatpos;s Dock</FreeFormText>*
*</specialHandlingText>*
*</SpecialHandlingInstruction>*
*</OrderShippingInformation>*
*<ProductIdentification>*
*<PartnerProductIdentification>*
*<GlobalPartnerClassificationCode>Manufacturer</GlobalPartnerClassificationCode>*
*<ProprietaryProductIdentifier>DESCRIPTION:PreFac Kit</ProprietaryProductIdentifier>*
*</PartnerProductIdentification>*
*</ProductIdentification>*
*<ProductSubLineItem>*
*<GlobalProductUnitOfMeasureCode>Each</GlobalProductUnitOfMeasureCode>*
*<isDropShip>*
*<AffirmationIndicator>No</AffirmationIndicator>*
*</isDropShip>*
*<OrderQuantity>*
*<requestedQuantity>*
*<ProductQuantity>1</ProductQuantity>*
*</requestedQuantity>*
*</OrderQuantity>*
*<OrderShippingInformation>*
*<CarrierInformation>*
*<GlobalCarrierCode>UVLN</GlobalCarrierCode>*
*</CarrierInformation>*
*<GlobalFreeOnBoardCode>Origin</GlobalFreeOnBoardCode>*
*<GlobalShipmentTermsCode>Collect</GlobalShipmentTermsCode>*
*<GlobalShippingServiceLevelCode>Premium Surface</GlobalShippingServiceLevelCode>*
*<SpecialHandlingInstruction>*
*<specialHandlingText>*
*<FreeFormText>Carrier Name : UVL Capital - Fob Text: EXW Amaapos;s Dock</FreeFormText>*
*</specialHandlingText>*
*</SpecialHandlingInstruction>*
*</OrderShippingInformation>*
*<requestedEvent>*
*<TransportationEvent>*
*<DateStamp>20020311Z</DateStamp>*
*<GlobalTransportEventCode>Dock</GlobalTransportEventCode>*
*</TransportationEvent>*
*</requestedEvent>*
*<shipTo>*
*<PartnerDescription>*
*<BusinessDescription>*
*<GlobalBusinessIdentifier>047897855</GlobalBusinessIdentifier>*
*<businessName>*
*<FreeFormText>Intel Corporation</FreeFormText>*
*</businessName>*
*</BusinessDescription>*
*<GlobalPartnerClassificationCode>End User</GlobalPartnerClassificationCode>*
*<PhysicalAddress>*
*<addressLine1>*
*<FreeFormText>2501 N.W. 229th</FreeFormText>*
*</addressLine1>*
*<addressLine2>*
*<FreeFormText>Attn: D1C</FreeFormText>*
*</addressLine2>*
*<cityName>*
*<FreeFormText>HILLSBORO</FreeFormText>*
*</cityName>*
*<GlobalCountryCode>US</GlobalCountryCode>*
*<GlobalLocationIdentifier>0478978550D1C</GlobalLocationIdentifier>*
*<regionName>*
*<FreeFormText>OR</FreeFormText>*
*</regionName>*
*</PhysicalAddress>*
*</PartnerDescription>*
*</shipTo>*
*<subLineItem>*
*<LineNumber>1</LineNumber>*
*</subLineItem>*
*</ProductSubLineItem>*
*<requestedEvent>*
*<TransportationEvent>*
*<DateStamp>20020311Z</DateStamp>*
*<GlobalTransportEventCode>Dock</GlobalTransportEventCode>*
*</TransportationEvent>*
*</requestedEvent>*
*<requestedUnitPrice>*
*<FinancialAmount>*
*<GlobalCurrencyCode>USD</GlobalCurrencyCode>*
*<MonetaryAmount>0</MonetaryAmount>*
*</FinancialAmount>*
*</requestedUnitPrice>*
*<shipTo>*
*<PartnerDescription>*
*<BusinessDescription>*
*<GlobalBusinessIdentifier>047897855</GlobalBusinessIdentifier>*
*<businessName>*
*<FreeFormText>Intel Corporation</FreeFormText>*
*</businessName>*
*</BusinessDescription>*
*<GlobalPartnerClassificationCode>End User</GlobalPartnerClassificationCode>*
*<PhysicalAddress>*
*<addressLine1>*
*<FreeFormText>2501 N.W. 229th</FreeFormText>*
*</addressLine1>*
*<addressLine2>*
*<FreeFormText>Attn: D1C</FreeFormText>*
*</addressLine2>*
*<cityName>*
*<FreeFormText>HILLSBORO</FreeFormText>*
*</cityName>*
*<GlobalCountryCode>US</GlobalCountryCode>*
*<GlobalLocationIdentifier>0478978550D1C</GlobalLocationIdentifier>*
*<regionName>*
*<FreeFormText>OR</FreeFormText>*
*</regionName>*
*</PhysicalAddress>*
*</PartnerDescription>*
*</shipTo>*
*<TaxExemptStatus>*
*<isTaxExempt>*
*<AffirmationIndicator>Yes</AffirmationIndicator>*
*</isTaxExempt>*
*<TaxExemption>*
*<GlobalTaxExemptionCode>Exempt - per State law</GlobalTaxExemptionCode>*
*<taxExemptionCertificationIdentifier>*
*<ProprietaryReferenceIdentifier>Not Available</ProprietaryReferenceIdentifier>*
*</taxExemptionCertificationIdentifier>*
*</TaxExemption>*
*</TaxExemptStatus>*
*</ProductLineItem>*
*<shipTo>*
*<PartnerDescription>*
*<BusinessDescription>*
*<GlobalBusinessIdentifier>047897855</GlobalBusinessIdentifier>*
*<businessName>*
*<FreeFormText>Intel Corporation</FreeFormText>*
*</businessName>*
*</BusinessDescription>*
*<GlobalPartnerClassificationCode>End User</GlobalPartnerClassificationCode>*
*</PartnerDescription>*
*</shipTo>*
*</PurchaseOrder>*
*<thisDocumentGenerationDateTime>*
*<DateTimeStamp>20020307T002254.760Z</DateTimeStamp>*
*</thisDocumentGenerationDateTime>*
*<thisDocumentIdentifier>*
*<ProprietaryDocumentIdentifier>pip3a4_po_id1</ProprietaryDocumentIdentifier>*
*</thisDocumentIdentifier>*
*<toRole>*
*<PartnerRoleDescription>*
*<GlobalPartnerRoleClassificationCode>Seller</GlobalPartnerRoleClassificationCode>*
*<PartnerDescription>*
*<BusinessDescription>*
*<GlobalBusinessIdentifier>123456789</GlobalBusinessIdentifier>*
*<GlobalSupplyChainCode>Electronic Components</GlobalSupplyChainCode>*
*</BusinessDescription>*
*<GlobalPartnerClassificationCode>Manufacturer</GlobalPartnerClassificationCode>*
*</PartnerDescription>*
*</PartnerRoleDescription>*
*</toRole>*
*</Pip3A4PurchaseOrderRequest>*
I cant see any junk characters or BOM in my Payload.. -
%DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7)
I had pre-allocated tunnel ip's to remote spokes , some of them were implemented and put into production. Some of them got the config but the tunnel interfaces were left at shut.
Its because of this reason that the DMVPN HUB keeps getting nhrp request from one of the inactive spokes. Following is the sh ip nhrp extract :-
10.x.x22/32
Tunnel0 created 00:02:58, expire 00:00:06
Type: incomplete, Flags: negative
Cache hits: 7
I just cant seem to find the spoke WAN ip to identify it. I tried debugs but just cant get it.
From HUB:-
Nov 30 10:36:31: %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel: 10.x.x.1 NBMA: 20.x.x.x)
Nov 30 10:36:32: NHRP: Send Resolution Request via Tunnel0 vrf 0, packet size: 86
Nov 30 10:36:32: (F) afn: IPv4(1), type: IP(800), hop: 255, ver: 1
Nov 30 10:36:32: shtl: 4(NSAP), sstl: 0(NSAP)
Nov 30 10:36:32: pktsz: 86 extoff: 52
Nov 30 10:36:32: (M) flags: "router auth src-stable nat ", reqid: 46113
Nov 30 10:36:32: src NBMA: 20.x.x.x.
Nov 30 10:36:32: src protocol: 10.x.x.1, dst protocol: 10.x.x.22
Nov 30 10:36:32: (C-1) code: no error(0)
Nov 30 10:36:32: prefix: 32, mtu: 17912, hd_time: 360
Nov 30 10:36:32: addr_len: 0(NSAP), subaddr_len: 0(NSAP), proto_len: 0, pref: 0 Nov 30 10:36:31: %DMVPN-3-DMVPN_NHRP_ERROR: Tunnel0: NHRP Encap Error for Resolution Request , Reason: protocol generic error (7) on (Tunnel: 10.x.x.1 NBMA: 20.x.x.x)
So my question is , How do i find out the spoke wan ip , so i can do something about it. For now, its just filling up my logs on HUb router...not good ;-))Hello Marcin,
If tunnel interface is shut no NHRP activity should be going, on top, in debugs you point the hub is sending resolution request, not receiving it.
Agree, I expected the same, but unfortunately this is not the case. Spoke does sent out NHRP requests even with Tunnel status as admin shut.
If your hub does not have NHS, it will not know where to send it's resolution request.
I am still on DMVPN Phase 1, so Spokes dont talk to other spokes yet.
Are you positive that there is nothing that is sending packets towards 10.x.x.22 on hub side (sniffer trace of classyfing ACL on "LAN")?
Other then a spoke, it cant be anthing, as the subnet is dedicted for tunnel interface's.
If you know it's not a misconfig and there is no traffic on hub side initiated to 10.x.x.22, try removing and adding full tunnel configuration. i.e. we want to make sure that crypto socket gets closed and restrated.
I can do this over weekend, but i am sure this is not going to fix the problem, reason being, that the HUB was setup before anything else and then we started migrating spokes from primary legacy gre tunnels to dmvpn tunnel as primary and legacy as a backup.
Guess, I am still looking for the answer...Is there a WAN acl that i can use to filter the successfully migrated spokes and log the deny message as in to know what remote wan ip carries along the tunnel ip of .22 or any other debug ?? -
SSIS 2012: SSIS Error Code "Excel Connection Manager" failed with error code 0xC0202009.
Hi,
This is kind of weird issue that I am experiencing with excel connection manager in SSIS 2012. This issue occurs sometimes but when I close and re-open SSDT (SQL Server Data Tools - newer BIDS) then this issues goes off temporarily.
Just FYI, through SSDT environment I executed the package successfully with both settings Run64bit runtime setting to Yes and No when error does not occur.
So far I have installed
http://www.microsoft.com/en-us/download/details.aspx?id=13255 (Microsoft Access Database Engine 2010 Redistributable).
I still remember for older versions of SQL Server (2005 & 2008) that I have executed Excel connection SSIS packages with Run64bit runtime = false i.e. in 32-bit mode. As far as I know I think Excel 64-bit issue has been resolved with SQL Server
2012 release.
Here is the detail of error message:
TITLE: Package Validation Error
Package Validation Error
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [2]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection
Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Access Database Engine" Hresult: 0x80004005 Description: "Unspecified error".
(Microsoft.DataTransformationServices.VsIntegration)
Here are my environment details:
SQL Server 2012 {Microsoft SQL Server 2012 (SP1) - 11.0.3368.0 (X64) } , Excel 2010 (32-bit). I am developing SSIS code on Virtual desktops with Windows 7 32-bit OS.
Also it occurred to me that since Virtual Desktops are on Shared Infrastructure, the source files and SSIS packages (code) can be on Shared drives for e.g. \\<Corpnet>\userdata\<Corp_Users_Grp>\<Username>\Visual Studio 2010\Projects\Integration
Services Project2\Integration Services Project2\Package.dtsx.
Does this kind of Shared drives have any impact to give this issue?
Thanks in advance!
Ketan
P.S.: I had look at this forum question -->
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/903bbe1d-e070-4c43-9d3b-0a5193550029/64bit-error-in-excel-connection-manager-in-ssisHi Arthur,
Thanks for your response.
Yes, it looks like SSIS still has bunch of issues with Excel files like as follows:
1) Some times excel source files cannot be parsed by excel source connection manager.
2) For derive column conversion, we can't replace the existing column. rather, we have to add the derived column as " add as new column" which is tough to manage while destination mapping.
3) If an column in excel contains a data which is not of the data type assigned for the column in excel, the excel source reads that data as "null". For the same, we can't validate the data and redirect the erroneous data in reject file. <-- For
this we tried IMEX setting also
4) In multi-tab/sheet excel file, excel source is unable to detect a tab and identify the metadata of the excel.
I am also checking Microsoft connect for Excel issues with SSIS 2012(https://connect.microsoft.com/SQLServer/SearchResults.aspx?SearchQuery=excel#&&PageIndex=22
As worst case scenario, I am thinking of converting Excel to CSV file or Flat text file. (http://www.mssqltips.com/sqlservertip/2772/importing-data-from-excel-using-ssis--part-2/).
Do you think it is advisable to convert Excel into CSV or Flat file.
Thanks,
Ketan -
Error
[Load data from excel file [1]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There
may be error message
I am using BIDS Microsoft Visual Studio 2008 and running the package to load the data from excel .
My machine has 32 bit excel hence have set property to RUN64BITRUNTIME AS FALSE.
But the error still occurs .
I checked on Google and many have used Delay validation property at Data flow task level to true but even using it at both excel connection manager and DFT level it doesnt work
MudassarThats my connection string
Provider=Microsoft.ACE.OLEDB.12.0;Data Source=E:\SrcData\Feeds\Utilization.xlsx;Extended Properties="Excel 12.0;HDR=NO";
Excel 2010 installed and its 32 bit edition
Are you referring to install this component -AccessDatabaseEngine_x64.exe?
http://www.microsoft.com/en-us/download/details.aspx?id=13255
Mudassar
You can try an OLEDB provider in that case
see
http://dataintegrity.wordpress.com/2009/10/16/xlsx/
you might need to download and install ms access redistributable
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server 2012 Analysis Services." Hresult: 0x80004005
Description: "Internal error: An unexpected error occurred (file 'pcxmlacommon.cpp', line 43, function 'PCFault::RaiseError').
I'm getting above error in the pre- execute phase of a DFT when I'm trying to fetch data from a SSAS cube using mdx query.
I'm using OLE DB provider for connecting to cube.
I got one resolution for Error Code 0X8004005, which asked me to add 'Format= Tabular' in cube's connection string. It does not seem to work either. Can any one help me out on this???You are probably missing an update.
I saw a MS Connect post https://connect.microsoft.com/SQLServer/feedback/details/250920/error-using-oledb-or-datareader-to-get-analysis-services-data where that suggestion was proposed as a fix, but is for an older SQL Server version.
So do there is a question if you pull data from SQL Server 2012 SSAS using SSIS 2012 (so no other build is involved).
Arthur My Blog -
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210 I keep getting this error when trying to update
Hi,
You can visit Error U44M1I210 | Install updates and see if it works.
Regards
Kishan -
Help: Error message "ORA-12560 TNS:Protocol Adapter Error "
I tried to install Oracle 8i EE version 8.1.7 on Windows 2000. Everything is OK until the installation proceeded to installing "Oracle Database Configuration Assistant". At that point, I got an error message "ORA-12560 TNS:Protocol Adapter Error (network not loaded)". I looked up the error message. The cause of the error said: "This error occurs when the SQL*Net driver cannot find the JSB driver because you may have either forgotten to load the JSB driver (for instance MFTP) or used an incorrect TCP_VENDOR key (for example, TCP_VENDOR=NOVLWP).". And the suggested action said: "Load the JSB driver or use the correct TCP_VENDOR key.". I am using a standalone PC with Windows 2000 at home, and the PC does not connect to any network(except that I can dialup to internet via modem). What should I do? I can't understand the error message. Any expert to help me overcome the error?
nulldatabase tnsnames.ora
=========
# TNSNAMES.ORA Network Configuration File: D:\Oracle\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = MODOSE)
(PRESENTATION = http://HRService)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
developer 10g tnsnames.ora
==============
# tnsnames.ora Network Configuration File: D:\Forms\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.132)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = Dedicated)
ORCL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ORCL)
Please tell me what changes I needed
database serivice name is "ORCL'
and my pc name is "mohsin-pc" -
every time i try to download itunes my computer comes ups up with an error code half way through down load error code 2330
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Error Code 8224 Ldifde Exchange 2010 installation failure
Hi, here is a problem I have been bashing my head with for about a week. I am transitioning to Exchange 2010 from 2003. I have two DC's running Windows Server 2003 Sp2, one of which is the Exchange 2003 server. I have just brought online a windows 2008R2
member server, which I am attempting to install exchange 2010 on. I get the following error message during installation.
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear(); install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema1.ldf")" was run: "There was an error while running 'ldifde.exe' to
import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'".
There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'
Elapsed Time: 00:00:22
And from the ldif.err:
The connection cannot be established
The error code is 8224
Now I have checked dns, all is good. I can resolve the DC without issue.
I have done dcdiag and netdiag and passes all tests. I have even written a hosts file, all this to no avail.
Any help would be appreciated.
Thanks
BI had a same and I fixed this........
Solution
1. The error is happening at the "Organization Preparation" stage, so let's go 'old school' and do that manually.
2. Locate the server on your network that is the schema master (Locate FSMO Servers).
3. Put the Exchange 2010 DVD in the schema master (Or share it over the network and connect to it from the schema master server).
4. Drop to command line and change to the DVD Drive/Directory with the Exchange 2010 setup files in it.
5. ONLY do this if you have Exchange 2003 already! Run the following command, (If no Exchange 2003 present, skip to the next step).
X:\Setup /PrepareLegacyExchangePermissions (Where "X" is CD ROM derive letter)
6. Run the following command:
X:\Setup /PrepareSchema
7.
Run the following command:
X:\Setup /PrepareAD
Note: At this point it may fail, and say it requires an organization name, (it will do this if it finds no existing container in Active Directory).
Error
Exchange organization name is required for this mode. To specify an organization name, use the /organizationName parameter.
If that is the case, then run the following command:
X:\Setup /PrepareAD /OrganizationName:"Your required org name"
Reboot your server and try to install exchange 2010.
Jotiba Patil -
M4E Error Codes with SBS/Exchange...
Hi,
Does anyone have a list of the error codes for Mail for Exchange?
I have a Nokia E61 and I am trying to link it to our SBS Server. The SBS server supports RPC/HTTP, so I know all the domain certs/settings/passwords are good.
The E61 also access the Internet via WiFi, so I know this works too.
However, after installing and checking everything I can - I see this in the error log, two error codes I dont seem to be able to find answers to anywhere!
All help most welcome!
08/05/2007 7:28:46 OffPeakTime active
08/05/2007 7:28:50 Mail For Exchange Error -30180
08/05/2007 7:37:47 Profile Updated
08/05/2007 7:37:49 OffPeakTime active
08/05/2007 7:37:50 Profile Updated
08/05/2007 7:37:51 OffPeakTime active
08/05/2007 7:37:54 Mail For Exchange Error -30207
08/05/2007 7:38:15 Setting ROAMING status to True
08/05/2007 7:38:24 Mail For Exchange Error -30207
08/05/2007 7:38:50 Profile Updated
08/05/2007 7:38:52 OffPeakTime active
08/05/2007 7:38:53 Profile Updated
08/05/2007 7:38:54 OffPeakTime active
08/05/2007 7:38:55 Cancel job:3,type1:
08/05/2007 7:38:58 Mail For Exchange Error -30207
08/05/2007 7:40:35 Profile Updated
08/05/2007 7:40:36 OffPeakTime active
08/05/2007 7:40:39 Mail For Exchange Error -30207
08/05/2007 7:41:06 Mail For Exchange Error -30207
08/05/2007 7:57:53 OffPeakTime active
08/05/2007 8:09:44 Setting OFFLINE Status to True
08/05/2007 8:40:39 Mail For Exchange Error -30180Help, I need somebody Help, not just anybody Help, you know, I need someone Help
When I was younger (less IT smart,but arrogant), so much younger than today I never needed anybody's help in any way But now these days are gone, I'm not so self assured Now I find, I've changed my mind, I've opened up the doors (i really am stuck!)
Help me if you can, I'm feeling down And I do appreciate you being 'round Help me get my feet back on the ground Won't you, please, please help me? (this M4E error is killing me!)
Maybe you are looking for
-
How do I authorize multiple devices on my adobe digital editions account?
How do I authorize multiple devices on my adobe digital editions account?
-
Hello everyone, I hope someone can help me. I wanna copy my pictures to an external hard drive. Therefore I was trying to format my Seagate 1TB external drive (so it works with the Mac), but my Disk utilities is not working as it should (don't know w
-
I would like to create open Save As dialog using ColdFusion. The user will be clicking a button and the dialog will pop up asking the user if he want to save the file. I know that it can be done using JavaScript, but I am not sure how it could be don
-
Register and Setup T-Box
-
Table maintenence Generator for a Huge data Table.
Hi Experts, I have created a Table maitenance for a Custom table which has some 80,000,000 records approx. Now the when i run this, it goes for a short dump saying "STORAGE_PARAMETERS_WRONG_SET". The basis have reported that the tcode is running a se