Error Contract change update in CRM from R/3

We have the following scenario:
1) Create quantity contract in R/3
2) Replicate contract to CRM
3) Create call-off order in CRM
4) Order updates contract in CRM and R/3
When we now change the contract in R/3 (change target quantity) the inbound queue R3AD_SALESCONTRACT instatus running for a long time. At some point we get message "Time limit Exceeded".
Does anyone have a clue on this error?
Thanks in advance.
Pascal.

Hi,
After entering EXIT, from command prompt you would need to go to "ua" foler and the execute the following command.
java -cp ua.jar.UaServer
then it will ask for administrator password.
And then the Ua server will be started.
Leave this window as it is.
Open another window in command prompt.
then execute the command
java -cp uagui.jar.UaGui.
This will open the upgrade assistant. Enter the Host name and then the User name as Administrator and the password.
This should help you in resolving the issue.
Regards,
Imran

Similar Messages

Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

It seems that the itunes program has some interfefence when contacting the apple server.
i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
ha presto it began the process of transfering the file to the iphone4 and has now fully updated
hope that helps
leon

Getting error when ASN update is send from R/3 to SNC

Hello,
We are facing below error when we ASN update is send from R/3 to SNC. We are using SNC5.1. Due to this it is not updating it in SNC as ASN confirmed. We are implementing customer collaboration.
Below is error:
ASN item 4046020504 / 900002 ( 669301 R00550 / 00001 ): Notified quantity 20196.000000 is greater than due qty 19635.00000000000000 (tolerance: 0.000000) 187(/SCMB/DM_DLV)
Is this that when the actual delivery qty is more than requested qty R/3, to have correct update we need to maintain over delivery/Under del tolerance in SNC.
If yes then where I can maintain in SNC.
THX

Hi Vaibhav,
SAP SNC uses the supplier tolerances from the following source:
If the purchase order that the customer has sent from his or her back-end system to SAP SNC contains delivery tolerances for an item, SAP SNC uses these delivery tolerances. If the purchase order item does not contain delivery tolerances, SAP SNC uses the delivery tolerances from the purchase order header
If the purchase order does not contain delivery tolerances, SAP SNC uses the delivery tolerances for the purchase order item from the following source:
If the purchase order item contains a contract, SAP SNC uses the tolerances from the contract.
If the contract does not exist in SAP SNC or if the purchase order item does not contain a contract, SAP SNC uses the delivery tolerances from the purchasing info record.
If the purchasing info record does not exist in the SAP SNC system, SAP SNC uses the delivery tolerances from the location product master of the customer location.
Regards,
Sandeep

Error in changing the number range from the external to the internal no.

Dear all,
             Here is the error found when using the T-Code PA30 for hiring an employee. while changing the number range from external to internal using Tcode PE03, the error found was ' could not find interval for the number range'
Can anyone help me out?

Hi,
     Thanks for your reply.
Please check out what i have done
The number range intervals displayed using T-code PA04 are
No        From                    To                           Current No.               Ext.
1       00000001            00069999                                                  checked
2       00070000           00079999                 70295                       unchecked
3       00080000          09000000                                                   checked
Using T-code PE03, the feature numbkr was changed i.e the return value has been changed from 3 to 2(internal no. assigned)
Error found when performing action using T-Code PA30 is -could not find interval for the number range 2.
Could you please clarify?
Thanks

Error 3 in Update(The Conversion from 0CALDAY to 0FISCPER failed)

Hi Guyz....
Seriously struck with this issue while loading data into 0PP_C02 using the D.S- 2LIS_04_P_MATNR. I've been getting the error "Time Conversion from 0CALDAY to 0FISCPER (Fiscal Year) Failed... and at update rule I've been getting the error "Error 3 in Update"
I've searched almost all the posts- alas, all are unanswered.
Can anyone please provide me the right soultion...?
Thanks,
Regards,
G!

Hi Gautam,
For converting calday to fiscal period, you need to have fiscal variant and also entries in Table T009B for this fiscal variant.
1) Check whether you have company code populated for all records.
2) Please check whether you have fiscal variant maintained in the company code master data.
3) Check whether you have T009B table maintained.
If not this can be transferred in source system -> Global settings.
Hope this helps.
Thanks,
Krishnan

RemoteApp and Desktop Connections Error 0x800401F0 when updating RemoteApp connections from RDS webfeed

Environment:
Windows Server 2012 R2 with RDS roles installed.
Windows 8 clients
Issue:
The RDS Webfeed doesn't updated automatically. Instead, I get an error:
"An error occurred while updating this connection. Error code: 0x800401f0, 0x0"
I can perform a manual update in the control panel, but the users who will be using this on a regular basis are blocked from the control panel by a GPO. Also, I don't want end users to have to perform this update manually anyway.
I've included a screenshot of the issue for reference.
DuRand Bryant

MS Support has provided no more than the following replies to us for this case so far:
Based on your description, I suppose that the issue you are experiencing is:
The connection updates manually just fine, but it fails in nightly auto-updates. And setting up the connection does prompt for credentials
the first time after updating KB2857650, and it didn't before.
Based on my experience, this may be a known issue of KB2857650. I am trying my best to contact production team to confirm this information.
Currently, we recommended the following action plan on Windows 7 clients.
=======================================================================================================================================
Please uninstall hotfix of KB2857650 on all Windows 7 clients.
Note: we need to restart the clients after uninstalling the hotfix.
Then please click
Start, click
All Program, click
Accessories, and then click
Task Scheduler.
Open
Task Scheduler Library under Task Scheduler (local), and then browse to the following location:
---------------------------------------------------------------------------------------------------------------------------- Microsoft\Windows\RemoteApp and Desktop
Connections Update\
Open the subfolder that represents your user name.
Delete the following tasks:
Update connections
Report update status
Start Workspace Runtime at logon
Note
To delete a task, right-click the task, and then click
Delete.
After that, please recreate the connection.
Please test how the issue goes and let me know the results.
After you performed the steps above, if this issue persists, would you please collect the following information so that we can narrow down this issue?
And Later after I confirmed that I agree the issue seems to be a problem with
KB2857650 and then asking if a hotfix would be made available:
Thanks very much for you reply.
I totally understood how you feel about this. I am trying my best to contact production team to release new update to fix this issue. I will keep you updated about it. Since
we need to do a lot of tests about this issue to provide stable hotfix with our customers, it may be time-consuming to release the hotfix for this issue. Thanks for your understanding in advance.

Error message when updating my Ipod from my Powerbook

Hello, I need some help re updating songs from my Itunes Library to my Ipod (3rd generation).
At first it appears that everything is working and the Itunes window states that the songs are being transferred to my Ipod, however after a short while, I get an error message stating that Updating failed. Ipod disk cannot be read from or written to.....
Anyone come across this before? All assistance gratefully appreciated.
cheers
Mawbabyuk

See your other thread.
btabz

Error - While changing existing leave request from ESS

We are trying to use the standard leave request application in ESS/MSS. The basic required standard configurations are done. Since we wanted custom notifications, the related workflow is copied into custom workflow and we have included required custom notifications. The custom workflow is also configured properly.
Now, the standard functionalities like making leave request, triggering notifications, approving leave request and posting information into backend are working fine from the ESS/MSS.
When the employee tries to change the existing leave request (before approval) from ESS, at the 2nd step (Review and Send), it is displaying one error message General task: can be edited by all users. But, it still allows submitting the records.
Once it is submitted, the system throws one java error at the final step (after pressing SEND button) u2013 Failed to process request. Please contact your system administrator. - java.lang.NullPointerException. The complete error information is provided in the attached word document. Even though, it throws error the submitted data is getting saved into the backend.
Please help to solve this issue.
Thanks,
Prabhu
Edited by: Prabhu T on May 18, 2011 1:53 PM
Edited by: Prabhu T on May 18, 2011 1:54 PM

What custom notifications you require in leave request? We have all available in standard using Rptarqemail
First of all, the WF task should be set as
General task: can be edited by all users, which you have done presumably under task classification
Now, for checking purposes, can you check with standard WF in table v_t554s_web for one absence only?
ie WS12300111.
Please test this and let us know if you have errors
Also please check your custom WF whether it is working correctly or not?

Error in BP Creation in CRM from Mobile Client

Hi,
I have created the mobile client application MSA. When i do the sync through conntrans, the BP is transfering from MSA to CRM and it is available in Inbound queue. But after executing the Bdoc it gives me a error message saying that the Partner GUID is no exist.
"Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
This error is in "CAPGEN_OBJ_WRITE" Bdoc.
When i check in SMW01, this Bdoc has only table CAPGEN_OBJECT with values (1 row).
and
"CUST_HIERARCHY" Bdoc has give the below error message.
"Sending of an empty message is not possible"
Kindly suggest me where is the issue.
Regards,
Bala.c

Hi Bala,
Which version of CRM are you using? There are some notes for CUST_HIERARCHY BDoc errors. Please have a look at them in the Support Portal.
CRM_BUPA_MAIN_VAL is used for validation of rules set in CRM Server and maybe you dont have the same mandatory rules in MSA.
Best Regards,
Ankan

URGENT : ERROR 18 while updating the Infocube from ODS....

Hello
We got the data into BW from MS SQL. There are 19 Datasources and we used views for all. Using 19 child ODS objects we updated 3 Parent ODS Objects.
Now we have to update the 3 ODS objects data to the InfoCube. When we try to Update its giving the error
"ERROR 18 in the Update" and some hexadecimal error message in the data, but we can only find the error like IV hexavalue inbetween the words(the InfoObject data type is CHAR) and in some errors we cannot find any mistake. It is just like normal text.
What could be the problem ?
Best Regards....
Sankar Kumar
+91 98403 47141

Dear Sankar Kumar,
I think this is related to Invalid character issues.. or SPaces setting in RSKC..
may be you want to look at eh following post..
Re: invalid characters
/people/siegfried.szameitat/blog/2005/07/18/text-infoobjects-part-1
Example:
let us say..
1. Check in RSKC for allowed characters..
2. Add a code in the update rule to restrict the texts contains..
!"%&''()*+,-./:;<=>?_0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ' are allowed characters in RSKC transaction then other than the above character is 'Invalid' including the smaller case letters and will throw the hex.. error.
since this is from database system even 'NULL' datatype from there is not visble to the eyes and can cause the failure.
regards,
Hari

Error 'Express document "update was terminated" from the author'.

Dear All,
I have created a delivery doc(PGI) with ref to sales doc, it gave the
del doc no. while creating billing do with ref to this del doc I am getting
an error " update was terminated". when I cheched Vlo2n it says that the doc does not exist.
Even I have done PGI the stock is not deducted( MMBE).
   Please help me to rectify this error.
   Thanx and Regards
    Narender.N

Check if number range is maintained for accounting document to be generated at PGI level. You will have to consult an FI consultant for the same.
Also check the document flow & there is high possibility that PGI is not saved, but number range utilized during the transaction.
Regards,
Rajesh Banka
Reward points if helpful

Document Flow not updated in CRM from ECC

Hi Experts,
We are having a scenario where we are creating Service Orders in CRM, which in turn creates a meterial reservation document in ECC for the spare part items. However, the material reservation number is not getting updated in the document flow of the service order in CRM. We are using CRM7.0. Any suggestions anyone?

Hi,
Do we need to make any MW settings for the document flow to be updated with the material reservation document created in ECC.
Rgds,
-Sweta

Error Message: Change of update mode not possible due to open V3 update

Hi Gurus,
I got error message when i change update mode (LBWE) from V3 to Direct or Queued delta method.
Error Message: Change of update mode not possible due to open V3 update
Long text: You are not allowed to change the update mode for application 11 from V3 to another method. This is because there are still V3 update entries for update module MCEX_UPDATE_11 that have not been processed yet.
Pls anyone give solution for this.
Thanks
Muthu

Hi Sreeni,
i did check in all the below Tcode as you adviced.
1. Clear all record at SM13, LBWQ / SMQ1, Setup tables, RSA7 for particular datsasource or application..
2. For LBWQ provide date range and delete not required records.
I did not get the 3rd point " Need to clear in CLINTS of R/3 system" of your reply.
what does that mean?
I checked all the above tcodes and got the same message as no queue or data exists".
I went SBIW tcode and activated my data source and try to change the Update mode but still it is throwing error message as "Change of update is not possible due to open V3"
Please help me out.
It will be very helpful for me if you could share steps or docs regarding this issue.
Thanks,
Shailaja

A contract modified in IS-U not updated at CRM

Hi!!!
I'm try to update the data of crm contract from sap isu contract, but isn't works fine, the status and the description of CRM contract for example is not updated. The Bdoc SI_CONTRACT is generated correctly, and the Badi's DOWNLOAD on ISU and CRM are enhanced with the fields, but the info is not updated in crm when initial load is launched or when a move-out it's do it in isu.
Can you help me please?
Regards,
David

Hi,
Please tick the below checklist and tell me if they are set:
1. Goto R3AC4. Is entry for object class BUPA present in the List. If not, add a new entry: Object class BUPA, RFC destination (destination of ISU)
2.goto transaction SMOEAC and check if ISU site is subscribed is for BUPA_MAIN. If not, please do the same.
3. Change and save a BP and check the status of the BDOC. Is it green? if not, let me know.
4. goto ISU transaction SM30. table CRMRFCPAR. Is RFC destination for CRM maintained. If not, please do the same.
Let me know if these things are in place.
Best Regards
Kaushal

Inconsistent Update error: JBO: 25014. Help Needed from Jdev team

Hi,
***Please help me in solving this issue. urgent!!!. Thanks.***
I need to know how can i Update after i browse throw a rowset
and set the row attributes. Simple posting the changes and
commit is giving me following error.
I am getting JBO:25014 when i try to update a detail table for
selected number of rows.
I have a JSP page which allows the user to select either at
master level or detail level using Radio Button and
2 Text fields, one for date and other for comments at master
level. This will appear mandatorily.
In detail level, Number of rows which will be dynamically
populated. If this level is selected, and say 5 lines are
displayed, I will be having 5 text fields for dates and 5 text
fields for comments. Upon submit, I pass these text fields
values as params and receive in JSP page as String arrays in a
seperate validation page .
At the database end, I have Order Master table and Lines detail
table.
For some records in Order table, I am able to update records in
both the tables. But for certain records in Order table, I am
unable to update the detail table and throws me a JBO:25014
error: : Another user has changed the row with primary key
oracle.jbo.Key
This record is very similar to other records and i am unable to
update this record from sql*plus.
In the validation Page, where i receive the parameters, I use
View objects for Orders and Details, executeQuery for selected
Order. Then I use Row Iterator for each of the view objects, in
between the row iterator tags, I set the row attributes with the
individual lines values if Libe level is selected or the common
header date and comments value to all lines.
Then i post changes and commit.
The code is below for the way I update lines records.
<jbo:DataSource id="ds"
appid="LivePoheaders.LivePoheadersAppModule"
viewobject="MyPOLinesView"/>
<jbo:RowsetIterate datasource="ds" >
<%
//trying to get a row object
rowln = ds.getRowSet().getCurrentRow();
// formatting my date input to a valid string
lnDateStr = PohdrFcastYear+"-"+PohdrFcastMon+"-"+PohdrFcastDay;
out.println(PohdrComments);
out.println("Header date" + lnDateStr);
formatter.applyPattern("yyyy-MMM-dd");
tempDate = formatter.parse(lnDateStr);
formatter.applyPattern("yyyy-MM-dd");
lnDateStr = formatter.format(tempDate);
lnVenFcastDate = new oracle.jbo.domain.Date(lnDateStr);
// setting the two attributes with input values
rowln.setAttribute("VendorForecastDate", lnVenFcastDate);
rowln.setAttribute("VendorComments",PohdrComments);
}catch( Exception e)
currErrorStatus = err.putErrorDesc(e.getMessage());
err.setCurrentErrorStatus(currErrorStatus);
%>
<jbo:RollBack appid="LivePoheaders.LivePoheadersAppModule"/>
<%
throw new oracle.jbo.JboException(e);
%>
</jbo:RowsetIterate>
<%
try
%>
 Posting Changes ... 
<jbo:PostChanges appid="LivePoheaders.LivePoheadersAppModule"/>
 Committing Changes... 
<jbo:Commit appid="LivePoheaders.LivePoheadersAppModule"/>
 Commit Successful... 
<%
currErrorStatus = "-1";
err.setCurrentErrorStatus(currErrorStatus);
}catch( Exception e)
currErrorStatus = err.putErrorDesc(e.getMessage());
err.setCurrentErrorStatus(currErrorStatus);
%>
<jbo:RollBack appid="LivePoheaders.LivePoheadersAppModule"/>
<%
throw new oracle.jbo.JboException(e);
%>

From the JDeveloper 3.2.3 online documentation:
JBO-25014: RowInconsistentException
Cause: Comparison of the cached entity failed with the values in
the database for that entity. This could happen when another
user or operation has committed modifications to the same entity-
row in the database. This exception can also be thrown if the
equals() method on one of the domain-type attributes in the
entity fails.
Action: Choose from the following options:
--Verify that another user or operation has not modified the
same row in the database. If this entity has attributes of a
domain type verify that the equals() method on these domains do
not fail when comparing the existing cached value with the newly
fetched value.
--For any attributes/columns that are updated by the database,
modify the entity attribute definition by selecting Refresh
after update on the Attribute Settings page of the Entity Object
Wizard.
--Use view.executeQuery() frequently, especially after any
operations that result in data being changed.

Error Contract change update in CRM from R/3

Similar Messages

Maybe you are looking for