Error CRTD PASG during usage decission

Hi,
I have created a sample in qpr1 for 1 liter of Fuil and have changed the status of the sample to REL and saved.
Now against that sample i have created an inspection lot, when i am trying to make the UD system is not alowing me to
make the UD as the status is CRTD PASG in inspection lot , how do i change the status to REL CALC so that i can make the UD, am i missing any settings.
Suggestions will be appretiated.

HI
May be u have created the INspection plan afterthe inspection lot creation .. now u
u go to QA32 and press inspection lot of tht material then Inspectioon specfication screen press the tasklist/spec after that u move on to the next sample and press SMPL radio button .. then lot may come into the created state ...
if the above do not work
thenm match the Range that u have mentioned in in the sampling scheme with the lot size of the inspecttion lot .. their may be chance of mismatching of them
Hope it helps u
Regards
ramanujam

Similar Messages

Error during Usage Decision - Not All Physical Samples are valuated

Hi,
I am using Sampling Procedure as follows:
Sampling Type : Fixed Sample
Valuation Mode : Attributive Inspection nonconf. Units
Inspection Points : Sample Management
I have assigned the Inspection Point as 200 and Sample Drawing Procdure in Inspection Plan Header.
I have recorded and closed results for 3 samples. During Usage decision the following message shows:
Not all physical samples are valuated! Do you want to force inspection completion?
This means that Valuation of Inspection points have not updated. I request your help to solve this problem.
Thanks & Regards
V.Devaraj

Hi
Check the inspection plan, check for all the operation, by double clicking on operation you enter the opertioa details screnn, pls scrol down, you should have a field called VALUATION, select the option "automatic valuation option" .
try this
navin

No inspection lot can be opened for this material error is coming during GR

dear friends,
no inspection lot can be opened for this material error is coming during GR. what is the cause for this and how to solve it. please suggest me
regards,
Krishna

Hi,
i think you have maintained the quality view and activated the inspection. but you have not created any inspection lot task list for the material and plant. thsi you can create through QP01 there maintain the material and plant. then enter in inspection plan give usage 5 and status 4. save it and try to check it with QA32 and see the lot. it should be released then only you can give usage decision.
regards,
Adwait Bachuwar

Got an error message -43 during back up step of recent update

Received an error message (-43) during back up step of recent update attempt to iOS 5 for my iPhone 4. Tried several times with the same error message. Anyone know how to get around this issue?

And now, with the new iCloud Control Panel 1.1, still an error, in English this time:
Outlook Setup Error
Your setup couldn't be started because of an unexpected error.
I was able to click the Report button, here's the beginning of the text it emailed:
Help Apple improve its products by sending us diagnostic and usage information about iCloud.
By sending this message, you agree that Apple will collect and use this information as part of its support services and to improve its products and services. To learn more about Apple's Privacy Policy, see http://www.apple.com/legal/privacy.
Your setup couldn't be started because of an unexpected error.
Error: 0x80004005: CopyPSTFoldersToCache
Error: 0x80004005: GetZ1Store
Error: 0x80004005: HrGetOneProp on Z1Store failed
AppleOutlookDAVConfig version: 3.2.16.0
Windows version (6.1.7601): Windows 7 Ultimate Edition Service Pack 1 (build 7601), 64-bit
Local app data directory test: Pass
Temp directory test: Pass
Outlook version: 14 (14.0.6109.5005), x64
Outlook location (installed): C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE
MAPI location: C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\MSMAPI32.DLL
MAPI logon succeeded
Message Stores Table:
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Hotmail Connector Store Service, 975C4FC305EB4BBBB1992A7570EC7CF9
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Outlook Data File, 4E495441F9BFB80100AA0037D96E0000
Contents of C:\Program Files\Common Files\SYSTEM\MSMAPI\1033\mapisvc.inf
[Services]
NOTES=Lotus Notes Mail
MSN_CON=Microsoft Outlook Hotmail Connector
APLZODSERVICE=iCloud
[NOTES]
PR_SERVICE_DLL_NAME=nwnsp.dll
PR_SERVICE_SUPPORT_FILES=nwnsp.dll
PR_SERVICE_DELETE_FILES=nwnsp.dll
PR_SERVICE_ENTRY_NAME=ServiceEntry
continued...

Sender Mail Adapter Error: exception caught during processing mail message;

HI , I am configuring mail to file scenario. Need to read mail content (no need to capture From,TO or Subject details) and create a file with the content in the mail.
Need to read mails from microsoft outlook. Exchange server has been configured for POP3 protocol.
Following are the details provoding in sender mail adapter:
URL: provided url in the format: pop://<server name>
Authentication method: plain
provided user credinetions to access mails.
poll interval - 1min
content encoding none.
processing parameters : quality of service-exactly once
Since there is no need to capture From,TO or Subject details, didn't select the option - use mail package.
Verified for unread mails in the mail box and made sure that there are few unread mails.
Also, created data types and other components in IR and completed mapping.
But after starting sender mail communication channel, getting error "exception caught during processing mail message; java.lang.NullPointerException" in RWB-adapter-communication channel monitoring.
please let me know what needs to be done to resolve this error.
Thanks.

HI Stefan, i tried, but still it is giving same error. Yes, i am able to access outlook mail with the user credentials given in the communication channel to access exchange server.
I am using message protocol: xipayload . Also since i dont have to capture TO,from,subject details., created data type just with one element of type string, not in the standard format .Does this makes any difference.

Error in ECC6 During installation

Dear all
Error in ECC6 During installation , the following contents is get from sapnst_dev.log
148556: if ( componentToBeCalled == 'NW_Usage_Types_Configuration_BI_ind_ind_ind_ind')
148557:
148560: if ( componentToBeCalled == 'NW_Call_Offline_CTC_ind_ind_ind_ind')
148561:
148564: }
ERROR 2008-06-27 07:43:37 [iaxxejsbas.cpp:178]
 EJS_ErrorReporter
FJS-00003 TypeError: spStringRE.exec(labelString) has no properties (in script NW_Onehost|ind|ind|ind|ind, line 63483: ???)
ERROR 2008-06-27 07:43:37
FCO-00011 The step validateContent with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent was executed with status ERROR .
TRACE
<html><head></head><body>An error occurred while processing service SAP ERP 2005 Support Release 2 > SAP Systems > Oracle > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to C:\Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1155]
 showDialog()
waiting for an answer from gui
INFO 2008-06-27 07:45:05 [iaxxgenimp.cpp:782]
 showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|SAP_Software_Features_GetContent|ind|ind|ind|ind|0|0|validateContent".

Up !?

Error RW:50004 during install of R12 on win 2003

Hello,
I'm trying to install EBS R12 Express install with Vision DB via edelivery.
Had some issues with MSVC and cygwin paths, but it was resolved thanks to posts on the forum.
After about 20% of the installation [about 1hr 30mins into it], I get the following error:
RW-50004: Error code received when running external process. See log file for details.
Running Database install driver for VIS instance.
I wasn't sure which log file, so I checked the one under J:\Oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\<random_number_here>.log
The relevant portion from the log file is:
<snip>
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM Run RapidClone configuration step
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>REM
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Statusstring Configuring Database"
"Statusstring Configuring Database"
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>(echo APPS & echo APPS ) | J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jre\NT\1.5.0\bin\java -DCONTEXT_VALIDATED=true -mx512M -classpath .;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\java;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\xmlparserv2.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\ojdbc14.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\OraInstaller.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\ewt3.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\share.jar;J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\jlib\oui\srvm.jar oracle.apps.ad.clone.ApplyDatabase -e J:\oracle\VIS\db\tech_st\10.2.0\appsutil\VIS_ora-apps.xml -stage J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz -showProgress -phase cfg -nopromptmsg
Log file located at J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDatabase_08300057.log
| 0% completed
<deleted many similar lines here....>
- 0% completed
\ 0% completed RC-50004: Fatal: Error occurred in ApplyDatabase:
Control file creation failed
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>if 1 == 0 goto :CFG_OK
C:\DOCUME~1\ADMINI~1\LOCALS~1\Temp>echo "Cannot execute configure of database using RapidClone"
"Cannot execute configure of database using RapidClone"
RW-50010: Error: - script has returned an error: 1
RW-50004: Error code received when running external process. Check log file for details.
Running Database Install Driver for VIS instance
Processing DriverFile = J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
Running Instantiation Drivers for J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adridb.drv
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrun10g.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrun10g.cmd
instantiate file:
source : J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz\template\adrundb.cmd
dest : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
backup : J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd to J:\oracle\VIS\db\tech_st\10.2.0\appsutil\out\VIS_ora-apps\templbac\adrundb.cmd
Step 0 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrun10g.cmd
Processing Step 1 of 5
Step 1 of 5
Command: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
Processing Step 2 of 5
Executing: J:\oracle\VIS\db\tech_st\10.2.0\temp\VIS_ora-apps\adrundb.cmd
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM
J:\OracleEBSR12_downloads\StageR12\startCD\Disk1\rapidwiz>REM $Header: adrundb.cmd 120.6 2006/12/21 19:50:11 marderiu noship $
</snip>
Any help on this would be appreciated.
Thanks.
Hammad.
Message was edited by:
user592768

Hussein,
I reinstalled MS VC++ again, couldn't delete those LEGACY_* registry entries though.
I thought I'd try install again before re-installing the OS. Here are the results:
I got the same error code again on the RapidInstall applet: RW-50004.
Looks like some sort of service isn't getting started or created.
However, looking at the J:\oracle\VIS\db\tech_st\10.2.0\appsutil\log\VIS_ora-apps\ApplyDBStack_XXX.log file it says:
<snip>
LSNRCTL for 32-bit Windows: Version 10.2.0.2.0 - Production on 02-SEP-2007 00:53:51
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCVIS))
The command completed successfully
ECHO is off.
Listener VIS has already been started.
ECHO is off.
addlnctl.cmd exiting with status 0
OpenService failed
adsvdlsn.cmd exiting with status 1007
ERRORCODE = 1007 ERRORCODE_END
.end std out.
.end err out.
</snip>
and further....
<snip>
[CVM Error Report]
The following report lists errors encountered during CVM Phase
<filename> <return code where appropriate>
J:\oracle\VIS\db\tech_st\10.2.0\appsutil\bin\adgentns.pl 25600
No of scripts failed in CVM phase: 1
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: J:\oracle\VIS\db\tech_st\10.2.0\appsutil\install\VIS_ora-apps
adsvdlsn.cmd INSTE8_SETUP 1007
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
</snip>
I also checked the NetServiceHandler.log file in the same dir and here is the trace:
<snip>
ADX Database Utility
getConnectionUsingAppsJDBCConnector() -->
APPS_JDBC_URL='null'
Trying to get connection using SID based connect descriptor
getConnection() -->
sDbHost : ora-apps
sDbDomain : spectrum-tech.com
sDbPort : 1531
sDbSid : VIS
sDbUser : APPS
Trying to connect using SID...
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@ora-apps.spectrum-tech.com:1531:VIS
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
ora-apps.spectrum-tech.com:1531:VIS
Trying to connect using SID as ServiceName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12518, TNS:listener could not hand off client connection
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS)))
Trying to connect using SID as ServiceName.DomainName
getConnectionUsingServiceName() -->
JDBC URL: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Exception occurred: java.sql.SQLException: Listener refused the connection with the following error:
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
The Connection descriptor used by the client was:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ora-apps.spectrum-tech.com)(PORT=1531))(CONNECT_DATA=(SERVICE_NAME=VIS.spectrum-tech.com)))
Connection could not be obtained; returning null
</snip>
At the end it says:
<snip>
adgentns.pl exiting with status 25600
ERRORCODE = 25600 ERRORCODE_END
</snip>
I tried pinging my oracle machine ora-apps locally and it works, i.e. if I do ping ora-apps I get a response. I also tried pinging using the dns suffix that I setup based on your instructions and I get a response as well.
Also, I when I try pinging the ora-apps machine from another one on the network using ping ora-apps, I also get the same result.
However, if I use the entire domain name, i.e. ora-apps.spectrum-tech.com, I get a response from some server on Yahoo hosting, our ISP!!!! is that a problem?
Thanks.
Hammad.

CRM 2011+An error has occurred during report processing. (rsProcessingAborted)

Hi,
i have installed CRM 2011 on-premise version in Server A. Database and CRM 2011 Reporting Extenison in Server B. Both the server are 64 bit server and IIS 7.0 . i can able to browse the Report server url. USer as been added in Sql DB Logins and
as permission to Reportserver and ReportservertempDB.
i can able to access the CRM Reports only using Admin Credenttials that is from the credential which Report server is installed and configured
Error in server 1:
Web service request SetDataSourceCredentials to Report Server
(http://servername/Reportserver_XXXSQLSRVR)failed with SoapException. Error: An error has occurred during report processing. (rsProcessingAborted).
Error in Server 2: took this error From error log file
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Data source 'CRM': An error has occurred. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: An exception has occurred in data source 'CRM'. Details: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'. ---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException:
Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: i INFO: DataPrefetch abort handler called for Report with ID=. Aborting data sources ...
processing!ReportServer_0-1!7e4!03/16/2011-10:34:51:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot create a connection to data source 'CRM'.
---> Microsoft.Crm.Reporting.DataExtensionShim.Common.ReportExecutionException: Caller S-1-5-21-1587242514-2812063576-513219026-1110 has insufficient privilege to run report as user 9f69b98c-c73d-e011-bd85-842b2b6567dd
Eventvwr error in server 2:
Failed to unload app domain DefaultDomain. The following exception occurred: Error while unloading appdomain. (Exception from HRESULT: 0x80131015).
I tried the Following ways to fix it
1.added User as content manager
2.In CRM apppool i have Admin in identity column
its really paining when i'm unable to access the CRM 2011 Default Reports. got stucked for a day.
Thanks, Saraswathy Kumaravelu

Hi All,
I encountered this same issue today after installing CRM 2011.
CRM 2011 on Server A
SQL and SSRS 2008 R2 on Server B
I found that I got the same errors described here when running the standard reports even after I had installed the Reporting Extension (CRM 2011 replacement for CRM 4.0 Data Connector). The reason I got the error was because the 'Data Source Type' had not
been updated in Report Manager.
Here's how I resolved:
1. Browse to Report Manager (http://SERVERB/Reports)
2. Open the Organisation_MSCRM folder
3. Click Show Details
4. Open the MSCRM_DataSource
5. Change the Data Source Type from Microsoft SQL Server
to Microsoft Dynamics CRM SQL
*Note: - This option is only available once Reporting Extension has been installed on SSRS Server.
6. Clear the contents of the Connection String box
7. Set the Connect Using: option to Credentials Supplied by user running the report
but do NOT check the
Use as Windows Credentials when connecting to the DataSource option.
8. Click Apply
9. Restart the SQL Reporting Services Service in
Reporting Services Configuration Manager
10. Test by running one of the Standard CRM Reports (e.g. User Summary)
Ta Da!! - Success!!
Hope this helps!

[Forum FAQ] Troubleshooting "An error has occurred during report processing" message when viewing SCCM reports

Symptom:
When you view a report with SCCM, you may encounter the following error message:
An error has occurred during report processing.
Under the details box, you can see the detailed error information as below:
System.Web.Services.Protocols.SoapException: The report server has encountered a configuration error. Logon failed for the unattended
execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. Logon failed for the unattended execution account. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException:
Log on failed. Ensure the user name and password are correct. ---> System.ComponentModel.Win32Exception: The user name or password is incorrect
at Microsoft.ReportingServices.Library.ReportingService2005Impl.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ParameterInfoCollection& Parameters)
at Microsoft.ReportingServices.WebServer.ReportingService2005.GetReportParameters(String Report, String HistoryID, Boolean ForRendering, ParameterValue[] Values, DataSourceCredentials[] Credentials, ReportParameter[]& Parameters)
Figure 1 is the screenshot of the error message in SCCM:
Figure 1.
Cause:
According to the detailed error message, it indicates that “The report server has encountered a configuration error. Logon failed for the unattended execution account.”
and “The user name or password is incorrect”, so this issue would be caused by the mismatched credential stored in report server.
Solution:
To solve this issue, you can follow the steps below:
1.
Access Report Manager URL on your reporting server.
From figure 2, you can see that the URL for Report Manager is
http://SCCM:80/Reports
in our lab environment. You can check your Report Manager URL in Reporting Services Configuration Manager.
Figure 2.
2.
Find out the date source {5C6358F2-4BB6-4a1b-A16E-8D96795D8602} and access it.
Figure 3.
3. Test connection (Figure 4)
You can have a test connection to check whether the credentials stored in the report server are correct or not.
Figure 4.
4.
Modify the password or choose another authentication method
If you want to change the password, please make sure that password is the same as the one that you have set for that user account in the domain.
5. Confirm connection
After you change the password, you can test connection again. From figure 5, we can see that connection created successfully.
Figure 5.
After all the steps above, there is no error message when viewing the report. (Figure 6)
Figure 6.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

ok . the user name is sccm.admin this user have the assignment to run as a services, he is a domain admin, on the sql server this user have the sysadmin, i create the reporting with the Reporting Services Configuration Manager, and on the Database i use
the sccm.admin to create the new database, on the Service Account i use sccm.admin user, also this user have local administrator on the SCCM server, + i give him the dbreader on All the database on the SCCM server witch it also the SQL server, i add the sccm.admin
on the reporting web the system role and check the all settings give him full permissions
do i make my self clear ? (my English is not so bright )
now from the SCCM 2012 console , some reports run perfectly, and some run and trow this error at me
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)
this poor gay have the same problem
An error has occurred during report processing. (rsProcessingAborted)

An error has occurred during SWF generation.

Hello
We are receiving the error message "An error has occurred during SWF generation. Please contact the file creator or your system administrator" while trying to publish a dashboard to the BO server. But we haven't been able to assure the client what's causing the problem.
Here is some background about the dashboard and the error:
- It does not contain any unsupported formulas.
- It contains about 3,000 rows distributed on different tabs.
The error appears to happen randomly. I have succesfully exported the swf file locally (on my computer) a couple of times. Using the preview button also works sometimes, but when we try tu publish we get the error. We also have other dashboards, and publishing them works fine with them.
I think this might be a resources issue, the computer from which we are trying to publish has 2GB in RAM, and although it doesn't seem to be consuming all memory when trying to publish, it looks pretty close to do so.
I've succesfully deployed the swf file on locally on an other computer that has 8GB in RAM, but it is not in domain, so I cannot publish from there, and due to company's policy we cannot copy the swf files directly to the server.
I'm looking for help on the error, or for an explanation on what does Xcelsius do when generating the swf, for the tests I've run I would say it is a resources problem but I don't have a way to support this.

Hi,
You can try to reduce the size and complexity in excel.
Just export your excel to local machine, open and save it again reimport the same excel.
By doing so your excel file size will get reduced. (To see the difference record the size when exported from xcelsius and after saving xls).
One more suggestion is try to reduce the complex formulas. All i can say is replace the Vlookup formulas with Match and Index.
Reduce if more countif() or Sumif() are used.
Last but not least, try to increase flashs buffer size.
Hope this might help you.
If these things are not going to work......... Last option is to increase your machines RAM.
Regards,
AnjaniKumar C.A.

"An error (1502) occurred during the action Open." when opening original .VSD files, but NOT copies!?

We have a weird situation we're trying to troubleshoot for quite a while: We have multiple .vsd files stored on our network in DFS shares.. We have multiple users who cannot open the files, when they try by navigating to the file and double-clicking it,
they get "An error (1502) occurred during the action Open. File not found"
However, if they copy and paste the file to the same exact network folder, THAT file they can open with no problem!
The problem is very bizarre. I've checked obvious things such as file/folder permissions, versions of Visio installed, things in common between people who can and can't open the files.. I even did some testing today with some strange results...
Windows 7 x64 machine with Visio 2010 Pro installed (x86):
1. Opened file by double-clicking it in explorer, "Got the 1502 error"
2. Tried it again, this time I just get "File not found"
3. Opened Vizio, did a File --> Open --> navigated to the file and opened it that way... 1502 error.
4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.
5. Closed the copy, tried to open the original, still get file not found / error 1502.
The file does exist, it IS there.. sometimes the user just copies it to their local desktop (well, it's not really local, it's redirected) and it opens fine there.. other users email themselves a copy of the file and then open it that way.. it works for
some, not for others.. and there's no discernible pattern yet to identify who this is affecting. Anyone have any ideas?
-Keith
-Keith Elkin

Hi,
Based on the error message, the issue may be caused by the Visio file is occupied by some other program in DFS.
>>4. Copy/pasted the file into the same folder where it's stored, then double-clicked the copy and it opens fine.<< If you did this step, the Visio file would rename in the same folder, like file1.vsd. Thus, it opened well.
Thus, I recommend you check the file's status in computer management in DFS server, see the below image:
If the affected Visio files were occupied, please try to clean them(right click>close the file) to test.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Sorry,
This didn't help, the files are not open, locked open, and the issue still persists. Any other suggestions?
-Keith
-Keith Elkin

Error message (M3024) during parallel goods movement

For publication distribution, collected unreferenced deliveries and goods issues are done in SAP system for a customer group by a program which is triggered by a web service every day. Standart SAP functionalities are used in this program. At goods issue part of program, an error message is occuring "Valuation data for material & is locked by the user &" with error code :M3024. The user who processes the program is locking himself. Also we have checked the other goods movement types in standart transactions (MB1B-MB11..)and same problem was occured. We have checked the notes that we applied before for to avoid material lock in paralel goods movement. There is nothing changed both in customizing and deveploment after upgrade. So we couldnt find the way to fix this problem. FIRST ANSWER FROM SAP***************************************** Can you kindly review the attached note 70865 with regards to this issue. WE APPLIED.-- We reviewed 70865 and this solution not applicable for our current system. According to note; We set material late lock exclusive time 15 seconds in OMJI. This solution solved material lock error at all plant level. After this solution, We get same batch error during goods movement(m3862), Then We applied note 157423, this note solved material batch lock error during goods movement, At last we have now m3024(Material valuation error lock) error during all goods movement. THEN********************************* As explained in the note 70865 , to ensure data integrity, it is necessary to block the material against updates by other users during good movements. This is achieved by blocking the material plant (lock object MARC) and the material valuation area (lock object MBEW) exclusively against othertransactions which update the material master. What you can do, as advised in the note, is to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously. The problem is that you will experience a disadvantage of performance loss after this change. Please, notice that with this change in OMJI, several users will be ableto carry out GOODS MOVEMENTS to the same material and plant simultaneously. This change will not allow the simultaneous input of a goods movement and an invoice for the same material (in this case, the material will be locked as soon as the purchase order item is adopted in the invoice and the error message M3024 will occur). When the error message M3024 occurs, you could check with transaction SM12, there you could find some tables like MBEW are locked by user. The table is locked to prevent valuation, quantity etc. to be updated. System does not check if it is standard price or MAP, as soon as you work with one material it will be locked (its valuation data has to be locked, because otherwise there is no guarantee of the consistency of the stock values. Without this lock mechanism the possibility of serious data inconsistencies could arise). your customizing under: SPRO > IMG > Material Management > Set up Material block for goods movements Here you could choose setting 2(at positing) to have only a short locking period at posting. Please review information in attached notes. 521945 FAQ: Material block 322989 Late block: Number of blocking attempts AT LAST ** PROBLEM STILL GOING ON WHAT SHOULD WE DO TO SOLVE THIS ERROR.

HI Fatih,
Refer to SAP Note 1744780 - Error message M3024 during Invoice Verification process .
In the standard system it is not possible the simultaneous entry of a GOODS MOVEMENTS and an INVOICE for the same material and the same plant.
When you enter the invoice for the purchase order item, the valuation data for the material is updated, therefore this valuation data (table MBEW) needs to be blocked so that it is not changed at the same time by any other transaction (which might cause inconsistencies).
Resolution
This system behavior can not be avoided by any customizing setting or any user exit.
This is correct system behavior to protect the other transactions update the material master.
As advised in the note 70865 :
It is possible to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously, however there is a risk to cause the data inconsistency and performance problems.

Error has occured during install before the requested operation for i tunes could not be completed your system has not been modified

error has occured during install before the requested operation for I tunes could be completed Your system has not been modified to complete the install run the installer again and I have it still won't work

See:
Trouble installing iTunes or QuickTime for Windows

An error has occurred during report processing. (rsProcessingAborted)

Access Web Databases and SSRS
Issue:
After creating an access web database, such as Contacts Web Database in SharePoint 2010 we receive the following error when trying reports. This only happens on the Address Book, Phone Book, and Contact List reports. The Contact
Details and Printable Labels reports both work. The reports do not begin to error until data is added to the database (no errors initially).
I have duplicated this across all of our environments with the same results and get similar results when adding a Projects Web Database.
Environment:
Prod:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
QA:
3 WFE Servers – SP 2010 sp1
3 App Servers – SP 2010 sp1
2 SQL Servers – 2012 sp1
DEV:
1 WFE/App Server – SP 2010 sp1
1 SQL Server – 2012 sp1
Background
SSRS was installed following recommended guidelines and can be verified to be working. http://blog.helloitsliam.com/Lists/Posts/Post.aspx?ID=66
Error full text
Microsoft SQL Server Reporting Services
An error has occurred during report processing. (rsProcessingAborted)
The Group expression for the grouping ‘Group1’ contains an error: Request for the permission of type 'Microsoft.Office.Access.Server.Security.AccessServicesPermission,
Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c' failed. (rsRuntimeErrorInExpression)

Found the answer
here.
In short, SSRS 2012 installation missed a couple of config entries. You'll have to add them yourself:
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\WebServices\Reporting\rsreportserver.config. Search for the <Data> tag and add this entry:
<Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c" />
Open C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\Reporting\rssrvpolicy.config.
Search for <NamedPermissionSets> and add this entry:
<PermissionSet
class="NamedPermissionSet"
version="1"
Name="ReportExpressionsDefaultPermissionSet">
<IPermission class="SecurityPermission" version="1" Flags="Execution" />
<IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
</PermissionSet>
In the <CodeGroup>node, around line 70, find and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”

An error has occurred during report processing. (rsProcessingAborted). Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand). The Cube either does not exists or has not been processed

Hi,
I'm having issues with the report created using SSAS cube.
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'DimUserWorkCentre'. (rsErrorExecutingCommand)
The Operator_Performance cube either does not exist or has not been processed.
I have searched through internet and tried all the solutions, but didn't worked for me.
SSRS services running as NETEWORK SERVICE user.
SSRS Execution running as a Different user, which is the login is used to logon ot that server. I have also verified this user has access to database. I'm using Shared DataSource(SSAS Source) for this report.
Can any one please help me.
Thank You,
Praveen.
Praveen

Hello,
Have you tried it to execute on report manager , Is your data source properly configured in Report Manager and your report is mapped with Datset correctly?
Have you executed the Dataset query MDX editor now?
What is the volume of data you are fetching in the report. Try it to execute in other than IE , I don't know the exact reason but some of our report with large volume of data are failing on IE , on the other hand these reports are running fine Google
Chrome
blog:My Blog/
Hope this will help you !!!
Sanjeewan

Error CRTD PASG during usage decission

Similar Messages

Maybe you are looking for