Error during Usage Decision - Not All Physical Samples are valuated

Hi,
I am using Sampling Procedure as follows:
Sampling Type : Fixed Sample
Valuation Mode : Attributive Inspection nonconf. Units
Inspection Points : Sample Management
I have assigned the Inspection Point as 200 and Sample Drawing Procdure in Inspection Plan Header.
I have recorded and closed results for 3 samples. During Usage decision the following message shows:
Not all physical samples are valuated! Do you want to force inspection completion?
This means that Valuation of Inspection points have not updated. I request your help to solve this problem.
Thanks & Regards
V.Devaraj

Hi
Check the inspection plan, check for all the operation, by double clicking on operation you enter the opertioa details screnn, pls scrol down, you should have a field called VALUATION, select the option "automatic valuation option" .
try this
navin

Similar Messages

Not all physical samples are valuated, force inspection completion?

Hi
I have entered results against inspection characteristics but on UD the system gives message "not all physical samples are valuated, do you want force inspection completion?
What is missing or how can I avoid this message?

In QE23, Select the inspection lot and check for the physical sample,
Once you enter both, you will get the screen similiar to QE51 to record result,
You will see a button for physical sample which u need to select and do the valuation.
hope this helps

Error during usage decision for Test Equipment

Hi,
I have completed results recording for Test Equipment using QE51N (results closed and confirmation completed). When I tried to make usage decision (QA11) for the lot the pop-up message shows as "Not all equipment is valuated! Do you want to force inspection completion. I also noticed that in equipment tab of qa11 code valuation column shows as Not Valuated.
I request you to help me to solve this problem.
Thanks & Regards
V.Devaraj

HI,
You may try changing the valuation mode in IA06. In the inspection characteristic overivew, click on details -> operation, scroll down, you will find Quality management inspection points -> maintain automatic valuation based on inspection points.
The changes if made will be effective only for the next inspeciton lots.
Regards,
M.M

Error during Usage decision

Hi,
System status is not updating in the transaction QA32.We find that system status is not updating from certain period earlier which is fine.
Another thing is We are not able to clear the inspection lots through UD in QA32.If we try to do the UD in QA32 we are getting the error operation QM20 not available for this lot message QV224.
If we try to view the inspection lot we are getting the error No status object is available for INL 80000000328
Message no. BS001.
At the time when system status is updating fine we are able to do these things.Is system status is the reason for this?
Please help us on the above mentioned problems.
Thanks & Regards,
Rajesh

hi,
i think none of the lot result is recorded.
QAC3 & QA02 can help you to create.
please check and confirm.
balajia

Valuate the non-valuated QM characteristic during usage decision

Hi Guys,
I don't understand why during usage decision, system pops up the following message even though I have force the inspection completion on one particular inspection characteristic.
Valuate the non-valuated QM characteristics manually? Yes button and No button
After hits Yes button, another message appears...
Class characteristic QNNVM1 can be manually evaluated.
There are two inspection characteristics in this inspection lot, and one inspectin characteristic has been record as pass and accepted during result recording, while another inspection characteristic (which is a required characteristic on system setup) did not perform result record. Thus, during QA11, I force this required characteristic to inspection completion.
My questin is why the system gave me "Valuate the non-valuated QM characteristics manually?" message?
Thanks
YY

Plz. tell me whether sampling procedure is used for these characteristics ?
If yes then whether valuation mode is 'valuate manually ' ?

Msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25

msi.webprintlist fatal error during installation could not open key: unknown/component/da42bc899bf25bdaf18c3b9b1a1ee8\ab4027db46dde994b955a68c2fdf44a. verify that you have sufficient access to that key, or contact your support personnel. please go to http:\\hp.com\support for troubleshooting information about "fatal error" and " msi.webprintlist"

Hi Assennatog, the problem could be in the registry keys that are still present even if you completely uninstalled all the NI SW. So, after having uninstalled every NI apllication, try to execute the keys deleting proccess, by using MSIBlast, in the way it's explained in the attached doc. Ciao!
Attachments:
msi.doc ‏32 KB

UOM Change during Usage Decision

Hi Gurus,
I am maintaining 2 UOM in the material master .
1) Kg
2 ) Tonne
I am purchasing my material in Tonnes . During Usage decision, I want to post my material in Kg.
I ] Is it possible to make the UOM change during Usage Decision.
II] Is it possible to use same inspection plan for the same UOM, In case of I am recieving the material by Kg or Tonne
Thanks in Advance.
Srinivasan

You cannot normally change the UOM in the UD. You can only use the bas UOM. SAP however does have a note on using alternate UOM in the stock posting. It is not as seamless as you would probably like, but its the best you'll do.
The note is 605861.
I posted part of it below.
Craig
With the import of the assigned Support Package or the implementation of
this note, a Business Add-In is made available with which you can program
an input help for quantities in the usage decision.
For example, this enables you to specify quantities for the stock posting
in an alternative unit of measure in the usage decision. Via a
corresponding BAdI implementation, you can call up a dialog box - in which
you can specify the respective quantity with the required unit - in the
usage decision when you use the input help (F4) for the quantity fields.
However, the quantity is always transferred in base unit of measure to the
stock posting.
The BAdI can only be used for stock-relevant inspection lots. You can only
enter the quantities in other unit of measures manually (explicit call of
the input help).
You can implement new BAdI QEVA_ALT_QTY_INPUT using Transaction SE19.
Take also the documentation on the BAdI into account.
You can transfer the BAdI definition together with the respective
documentation using the assigned Support Package.

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.muli

I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.mulib file is also not there so you cannot automatically download all the necessary library files. Can anyone help?

found it in another area
Where do I find the cc getting started Katies.mulib File ?

Not all selected pictures are shared in album sharing in Photostream

I am trying to share an album with my friends on photostream. After i selected the album, added the friends, and waited for ever to upload the pictures, I realized that not all the pictures are available on the shared album. So i had to go back again and check the photos one by one to see what has been uploaded and what is missing to reupload them manually. This can get very tiring in large albums.
I guess mmy question is this:
Why is it doing that ? and how can i avoid such behaviour?
Is there a way that i can monitor / check the photos uploaded to make sure that the full album is there online ?

Hello Karim Zaafan,
Thank you for using Apple Support Communities!
I was thinking that it might be a good idea to see if perhaps you are bumping up to the limits of Shared Photo Streams.
iCloud: Photo Stream limits
http://support.apple.com/kb/HT4858
Shared Photo Stream limits
The current Shared Photo Stream hourly and daily limits are as follows:
Maximum number of photos to share per hour: 1,000
Maximum number of photos to share per day: 10,000
These sharing limits are separate from the upload limits above. For example, in the same day you could upload 10,000 photos to My Photo Stream and then share those 10,000 photos, or 10,000 other photos.Some additional limits for Shared Photo Stream usage:
Maximum shared streams an owner can share: 100
Maximum shared streams a user can subscribe to: 100
Maximum subscribers per shared stream: 100 (the number of subscribers on each shared stream)
Maximum number of photos per shared stream: 1,000
Maximum number of comments per shared stream photo: 200 (a comment can be either a like or a text entry)
Maximum characters per comment: 200
Maximum number of invites a shared stream owner may send per day: 200
Also I would recommend this precautionary step from iCloud: Photo Stream troubleshooting found http://support.apple.com/kb/TS3989
Ensure your iOS device has not fallen below 20% battery power. To preserve battery life, Photo Stream downloading and uploading are disabled when the battery reaches this threshold. Downloading and uploading will resume once you charge your device, and the battery charge is greater than 20%.
Cheers,
Sterling

I have three "pages" of apps, not all of which are full. How do I move an app from one page to another to consolidate?

I have three pages of apps, not all of which are full. How do I move apps from one page to another to have full pages?

Hook your iPad up to your computer and iTunes and move them from within iTunes.
Or
Hold down on one of your apps until they all start to wiggle. Then hold down on the ones you want to move and drag them on the screen. Drag them to the middle left to move them left,(such as from page 2 to page one) middle right ot move them right,(from page 2 to page 3) rearrange as you want.
When you're done, tap the home key and everything should stop wiggling.

My notes won't open on my iPod touch 5 g it lags and closes everything else is fine I need my notes all my passwords are written there in my notes.

My notes won't open on my iPod touch 5 g it lags and closes everything else is fine I need my notes all my passwords are written there in my notes.

If on a computer browser you go to icloud.com and sing in are you notes there? If so get them off.
Next,
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>iCloud and delete the iCloud account from the iPod,. Note this does not delete the account, only deletes it from the iPod. Then sign back in.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Backup and then restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Not all my songs are showing in itunes even though they are in the Itunes Media file directory

Not all my songs are showing in itunes even though they are in the itunes Media Dir. I have spent hours trying to find out why so I moved the songs out of the Music/itunes/itunes media and uninstalled itunes. I then restarted my pc and re-installed itunes. When I opened itunes the same songs are still there (but cannot be played as cannot find location) even though I have not put anything back in the itunes media dir. To me there seems to be a refreshing problem as itunes is not looking at the directory even through the advanced preferences area is mapped to the correct area.
Help please.
Thanks

Apple's official advice on duplicates is here: Find and remove duplicate items in your iTunes library. It is a manual process and the article fails to explain some of the potential pitfalls such as lost ratings and playlist membership, or that sometimes the same file can be represented by multiple entries in the library and that deleting one and recycling the file will break the other.
Use Shift > View > Show Exact Duplicate Items to display duplicates as this is normally a more useful selection. You need to manually select all but one of each group to remove. Sorting the list by Date Added may make it easier to select the appropriate tracks, however this works best when performed immediately after the dupes have been created. If you have multiple entries in iTunes connected to the same file on the hard drive then don't send to the recycle bin.
Use my DeDuper script if you're not sure, don't want to do it by hand, or want to preserve ratings, play counts and playlist membership. See this thread for background, this post for detailed instructions, and please take note of the warning to backup your library before deduping.
(If you don't see the menu bar press ALT to show it temporarily or CTRL+B to keep it displayed.)
The most recent version of the script can tidy dead links as long as there is at least one live duplicate to merge stats and playlist membership to and should cope sensibly when the same file has been added via multiple paths.
See also Make a split library portable for some thoughts on best practice when it comes to organizing the library and media files.
tt2

I preordered an album but not all the songs are showing up. They say purchased but wont go into my itunes library or onto my iphone. Please help.

They say purchased but wont go into my itunes library or onto my iphone. Please help.

Hey there aussieboss123,
It sounds like you are wanting to download an album that you pre ordered, not all the songs are downloading. First, use this section of the following article to see if the tracks download:
Download a pre-ordered item
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
If you enabled the option to automatically download prepurchased content in iTunes, then your pre-ordered content may already be in your library. If not, click the download link provided in your email notification, and your pre-ordered content will begin to download. You can also use the Check for Available Downloads feature in iTunes on your computer (choose Store > Check for Available Downloads) to begin downloading your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
If it does not, I would use the following article to report a problem with the purchase to the iTunes Store support directly:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/ht1933
Thank you for using Apple Support Communities.
Cheers,
Sterling

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

Despite ticking the box "remove all website data", when I reset Safari not all stored cookies are eliminated. How can I overcome the problem? Or is it a bug?

I have done a little experimenting: 1-close all open windows (I found that I had to do this step in order to keep Safari from hanging-will be explained later). 2: Remove all data in Prefs. 3: Immediately close the prefs window (no window should be open at this point) and quit Safari. Try to complete step 3 fast as possible; I have it down to a few seconds. The reason I urge you to close all windows is that Safari hangs until forced to quit upon immediately quitting after removing cookies. I think the auto page reload in Lion is the cause of these hiccups but I can't be sure about that. The hasty quit I found is crucial to success. Don't know why that is but it could prevent the data from re-populating. A quick flush, if you will. Hit me back if you need any of my suggestions clarified; a bit wordy, I know

Error during Usage Decision - Not All Physical Samples are valuated

Similar Messages

Maybe you are looking for