Error - Developer Mode Exception : Lov Input should by default be the query

How to get rid of this message?

Full error message
Lov Input should by default be the queryable criteria and Result

Similar Messages

Error:Lov Input should by default be the queryable criteria and Result

Hello,
I have a LOV Which displays the Locations.It has 2 columns Location_id and Location_Name.This LOV is attached to a field named "LocationName".Requirement is to show the existing location name based on the location id of the employee that is queried before updating the employee details.
The programatic Query property of the associated LOV map is set to True as i need to bind the query with the location_id at run time. However this gives me the following error message when the page is opened :
Lov Input should by default be the queryable criteria and Result
Can you please let me know what need's to be done?
Regards,
GayatriJ

Normally you will get this error, when you didn't give LOV field as the criteria item in the LOV mappings.
Check you have given the LOV field as one of the criteria mapping for the LOV.
Thanks.
With Regards,
Kali.

Developer Mode Exception encountered in item EffectiveFrom Error

In Oracle apps , When I click on Configurator Developer, I get this error on the very first page :
Developer Mode Exception encountered in item EffectiveFrom Error: The item EffectiveFrom has a type (DATETIME) which is incompatible with the associated VO attribute, EffectFromAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveTo Error: The item EffectiveTo has a type (DATETIME) which is incompatible with the associated VO attribute, EffectUntilAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveFrom Error: The item EffectiveFrom has a type (DATETIME) which is incompatible with the associated VO attribute, EffectFromAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveTo Error: The item EffectiveTo has a type (DATETIME) which is incompatible with the associated VO attribute, EffectUntilAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
I havent been working in any seeded applications lately . I am working on some other custom application and have depolyed it on server and this error did not occur untill yesterday.
There is a profile option : FND: Developer Mode which is set to nothing on server.
Also I have enabled developer mode to true in zone.properties
could any of this be a problem ?
Thanks
Edited by: user633772 on Sep 12, 2008 11:42 AM

A few doubts :
1. How is it different to set prof. opt. from Func Admin to setting it from Sys Admin ?
2. Do I need apache bounce after this ?
3. I had not touched these p/os and the values for site/user were null from before, so why do I see the error and others do not ?
4. Apart from all the error I posted in this thread I also get some error when I launch configurator from my custom webpage -
error is like this :
The OA passivation framework coding standard has been violated. The view object with full name, CZApplicationModule.TreeViewUsage, is not properly prepared for row insertion. Either setMaxFetchSize(0) or executeQuery() (or any equivalent method that ends up executing the view object query) must be called on the view object before new rows are inserted. For a detail view object in a master - detail relationship, executeQuery() (or any equivalent method that ends up executing the view object query) must be called instead of setMaxFetchSize(0) on the detail view object before new rows are inserted into the detail view object. setMaxFetchSize(0) call on the detail view object could cause a number of adverse effects.
Thanks

Developer Mode Exception

I am not able to understand what the below exception means,I would like to fix this in the Development environment.Can somebody help me in deciphering the exception.
Developer Mode Exception encountered in item CacNtsCreateNotes Error: The item CacNtsCreateNotes has a maximum length (2000) which is not equal to that of the corresponding VO attribute, AddNote length (4000). Action: Make sure they are equal in size.
Is it got something to do with 2 VO attributes or a VO attribute with some other page component?

Vikram,
The error clearly points, that the bean on your page with id "CacNtsCreateNotes", length is not equal to the attached VO attribute.You need to make the length of bean exactly equal to the VO attribute length.
If this error is coming from seeded code, you can ignore, because developer mode exceptions are anyways not visible to user... in production.. without enabling the corresponding profile option.
--Mukul

Developer Mode Exception encountered for item.

Hi,
After running the page I am getting following error ,
1. Developer Mode Exception encountered in item CitizenId Error: The item CitizenId has a maximum length (0) which is not equal to that of the corresponding VO attribute, CitizenId length (20). Action: Make sure they are equal in size.
What is the reason behind it?
Thanks & Regards,
Sagarika

Sagarika,
As suggested you can have the attribute length and the item field length as same. Seems you created the item CitizenId and did not enter any maximum length property. So you can enter a value to make it 20.
Sumit

Reduce the size of Input box comingby default with search query

Hi,
I have created one EO and VO and one jsp for that . Inside that VO , there is one option Named Criteria, which is having All Queriable Attributes option , on drag and drop of this option i have got default search page for all the attributes which i had in my form , But with every dropdown am getting one input box to specify the value of my search, i want to reduce the size of that input box . there is no code in the jsp for those attributes.
Please help
Regards
shadab

Filed bug# 6501297 to track this issue. Thanks for reporting it.
For now you'll need to manually add an additional facet to the content of the query component's "valueStamp" facet with the id of the same name as the attribute and manually set the properties on an <af:inputText> to the desired width.
Between Tech Preview 2 and production the Query form component is being simplified to be more metadata driven, so this temporary workaround is applicable only to the TP2 release.

OAF: Error:Developer Mode Error: Cannot Display Page

Hi Everyone,
When i click on button it shows me the below error:
"You cannot complete this task due to a loss of page data.
Cause:
This error has been encountered because the SESSION_TIMEOUT_RECOVERY_ENABLED profile option value was set to "No" when the page was run with OAPassivationTestMode value, "1."
Action:
Use a combination of responsibility and application that has the SESSION_TIMEOUT_RECOVERY_ENABLED profile option value set to "Yes." For the application level value, the application associated with the page definition will be used for this profile, not the application associated with the responsibility. Or set OAPassivationTestMode value to "2" to bypass this error. Setting the passivation test mode to "2" has the effect of setting the SESSION_TIMEOUT_RECOVERY_ENABLED value to Yes and the application module retention level value to MANAGE_STATE."
How to do this?
plz help me to get out of this?
Thanks.

Hi,
You can try changing
/<yourinstance>/erpapp/iAS/Apache/Jserv/etc
zone.properties session.timeout
Check link
http://mukx.blogspot.com/2007_11_01_archive.html
http://www.solutionbeacon.com/best7.htm
Thanks,
Jit

What type of input should be provided to the proxy function module HR_trv_credit_card_transaction

Hello All,
I am trying to configure the proxy for credit card transaction in Trip module,For this the standard proxy class is being used. I am not able to find out what should be the input to the function module Hr_trv_credit_Card_transaction. This relates to some control structures.Does anybody has some idea on this.
Many thanks
Papiya

Hello,
The manual on page A-3 has some useful information. I am posting it below. Additionally, I found that the SCXI-1104 series use a two-pole RC Butterworth filter. As you'll see in the notes below the 10kHz cutoff is the -3dB point for the filters.
Filters
Cutoff frequency (?3 dB)
SCXI-1104 ............... 2 Hz
SCXI-1104C ............. 10 kHz
NMR (60 Hz) ............ 40 dB (SCXI-1104)
Step response (either gain)
Accuracy SCXI-1104 SCXI-1104C
To 0.1% 1 s 200 ms
To 0.01% 10 s 1 ms
Hope this helps,
John N
Applications Engineer
National Instruments

Can't view photos in Develop mode. Just a blank template (as is the preview template)

Hello community,
I don't know what happened and I certainly can't figure out what to do about this problem. When I open LR 4, I can see all my folders in the Library. When I switch to 'Develop', I still have the strip below and when the mouse hovers over the pic, it shows up in both the preview and main window. BUT, when I move up to the window with the mouse, the pic disappears and the screen goes to the default grey. ALSO, the few times that the picture was in the screen, I would try to make adjustments and nothing would happen. So I NEED HELP!!!! Thanks.
RB

Post screen shots of the Library and Develop module views and you may get some responses.
Things to try in this order:
1) Close out all applications, shut down, and reboot your system.
2) Reset the LR 4 Preferences file and recover catalog:
http://helpx.adobe.com/lightroom/kb/recover-catalog-images-resetting-lightrooms.html
You may want to record your Preferences settings. You can also rename the old preferences file for recovery if this does not help:
com.adobe.Lightroom4.plist.old
Lightroom 4 Preferences.agprefs.old
3) Uninstall LR4.x and reinstall LR4.4.1.

What sort of input should be given to the FP-DO-410 module to generate discrete output

We are using a FP-DO-410 module for creating discrete output.Can we use it to generate swept square wave pulses

Hi,
You can generate a "square wave" with the FP-DO-410, but this is not normally the way this module is used. This module contains "static digital output", which means you can only write true or false, in other words, you cannot exactly control the frequency of the output signal, if you want to have control of the frequency you normally use a counter module (FP-CTR-50X) or even better a FP-PG-522... these modules have their frequency hardware controlled...
You can create a square wave with the FP-DO-410 but in that case you will have to create the square wave via software and the frequency will be software dependent, connection dependent and so on... the final result will be very poor (no practical use)...
So, if you want to create square wave I
would advise the FP-PG-522.
I hope it helps
Best Regards
Andre Oliveira

Lov s should be interdependent

Hi friends
I have req like
I have 2 lov inputs
My task is both lov s should be interdependent .whether user selects 1st or 2nd the else lov input should be default based on selected ones
(I GOT FIRST DEPENDENCY not getting second dependency)
FIRST LOV INPUT :-.emp name (for this attcahed lov maps are lov map1 and lov map3)
lov map1-- lov region item-empname
                    return item --empname
                    criteria item-- empname
lov map3--lov region item--empname
                    return item--formvalue
                    criteria item-- KEPT blank
SECOND LOV INPUT:-emp number ((for this attcahed lov maps are lov map2 and lov map4)
lov map2 --
                     lov region item- emp number
                    return item -- emp number
                    criteria item-- emp number
lovmap 4---    lov region item--emp name
                       return item -- KEPT blank
                        criteria item-- formvalue
As u said "In mapping of Second LOV, set criteria item as Employee Name."
I tried but no use
(My task is both lov s should be interdependent .whether user selects 1st or 2nd the else lov input should be default based on selected ones)
Exactly as per above in which map I have to keep /set   criteria item as Employee Name ?????????????????
Please clarify
Thanks
Aravinda

Sushant ,
I tried that .but no luck.
Finally I got solution.This is the logic.
Even we select either , else input auto appears.But using 6 lov maps.
RETURN AND CRITERIA ITEMS ARE LOV INPUT'S IDs
FIRST LOV INPUT :-.emp name
lov map1--   lov region item-empname
                    return item --empname
                    criteria item-- empname
lov map3--   lov region item--empnum
                    return item--empnumber (2nd lov id)
                    criteria item-- blank
lov map5--   lov region item--empnum
                    return item--blank
                    criteria item-- empnumber (2nd lov id)
SECOND LOV INPUT:-emp number
lov map2 --    lov region item- empnum
                    return item -- emp number
                    criteria item-- emp number
lovmap 4---    lov region item--emp name
                    return item -- empname(ID of 1st LOV)
                    criteria item-- blank
lovmap 6---    lov region item--emp name
                    return item -- blank
                    criteria item-- empname(ID of 1st LOV)
RETURN AND CRITERIA ITEMS ARE LOV INPUT'S IDs

Developer Mode Error

Hi everyone,
I'm trying to find out what I did wrong closing the connection after calling a Stored Proc, the stored works fine and it made the update and others intructions, the problem comes when I whant to reload some VO's before they data was updated.
Here's the error:
Developer Mode Error - The database connection in the AppsContext object associated with the root application module's transaction has changed while the application module was in use. Cause: This could have been caused if application code called releaseJDBCConnection(), logOut(), or freeWebAppsContext() on the AppsContext object. Note that the AppsContext's JDBC connection is referenced and used by the application module's transaction. Action: Check your application code and remove these calls if the AppsContext was handed out from OADBTransactionImpl.getAppsContext(). (This developer mode check cannot detect the release event, if the same connection instance got checked out again through the getJDBCConnection call on AppsContext after the release.).
and here's my code in the AM
public void methodExample(String famEX){
Connection con = getOADBTransaction().getJdbcConnection();
CallableStatement cs = null;
for(blah blah blah){
if( blah blah){
try{
cs = con.prepareCall("begin dbEschema.SP_Example_Update_Proc(?,?); end;");
//some instructions
//declare and enter the "IN" values
int p_Id_Fam = (Integer.parseInt(famEX));
String p_Item_Id = r.getItemId();
cs.setInt(1, p_Id_Fam);
cs.setString(2, p_Item_Id);
//Execute the procedure
cs.executeUpdate();
cs.close();
con.close();
}catch(Exception e){
System.err.println("Exception: "+ e.getMessage());
}finally{
try{
if(cs != null)
cs.close();
if(con != null)
con.close();
}catch(Exception ex){
System.err.println("2nd Exception: "+ ex.getMessage());
cs = null;
con = null;
I wonder what can be the mistake, I hope you can help me
Regards,
Mentor
Edited by: mentor on 9/08/2010 03:29 PM

Thanks Ajay, Reetesh
I found another way to call without any problem the StroredProc from AOF, this can be helpful for another users.
OADBTransactionImpl oadbtransactionimpl = (OADBTransactionImpl)getDBTransaction();
Row[] rows = getacDVO1().getAllRowsInRange();
for(int i = 0; i < rows.length; i++){
acDVORowImpl r = (acDVORowImpl)rows;
StringBuilder procedureCall = new StringBuilder();
if(r.getSelected().equals("ON")){
try{
int p_Id_Cat = (Integer.parseInt(String));
String p_cve = r.getYourElements();
procedureCall.append("begin SCHEMA.YOUR_STORED_PROCEDURE('").append(p_Id_Cat);
procedureCall.append("', '").append(p_cve_ac).append("'");
procedureCall.append("); end;");
OracleCallableStatement oraclecallablestatement = (OracleCallableStatement)oadbtransactionimpl.createCallableStatement(procedureCall.toString(), -1);
oraclecallablestatement.execute();
getOADBTransaction().commit();
}catch(SQLException sqlexception){
System.err.println("SQL Exception: "+ sqlexception.getMessage());
getOADBTransaction().rollback();
throw OAException.wrapperException(sqlexception);
}catch(Exception e){
System.err.println("Exception: "+ e.getMessage());
getOADBTransaction().rollback();
throw OAException.wrapperException(e);
I hope this example can be very useful to this community
Best Regards,
Mentor

J1INCHLN when should I use error control mode checkbox

Hi Experts,
I am using t-code J1INCHLN for creating remittance Challan.
But in ECC6, EHP 5 there is new functionality added & no documentation available for same.
There is one field with tick option called Error Control Mode.so when should i use this functionality.
Can anyone help on this?
Thanks and Regards,
Sameer

HI
Please refer the note no : 1567443
Manual Control in J1INCHLN to change currency key/doc type
"After this, if you will run J1INCHLN, you will get a checkbox at the end
with 'Error Control Mode' which will be selected by default. If you want
to change document type, currency or rate during processing, you should
uncheck it else it will take you to the last screen."
I hope note is allready available in your system hence you are getting above cheeck box.
If you want to change the document type and currency or rate during posting then you need use the check box.
Regards
Madhu M

In Develop Mode, always Display As Shot White Balance

When adjusting WB for RAW images in Develop Mode, it would be really useful to have the As Shot WB visible in RH Pane, along side the Custom WB or other adopted WB.

and I guess, just undo after changing to As Shot, or is there someway more elegant?
I don't completly understand that... Do you mean that you just want to quickly review what the WB in your camera was for the photo, but you want to retain the custom WB setting that you made during developmen? If that is the case, yes, undo afterwards seems to be the best thing to do. If I remember correctly, there is no place in the metadata panel where one can view the original WB information (I don't have LR at my disposal at present).
The same should be true for the flash info, but I am not 100% sure about that right now. Look for it in the metadata panel switched to "EXIF". If an information is not there, it is probably not available in LR elsewhere (except perhaps via a plugin).
Note: The WB values (temp, tint) of "As Shot" do not necessarily equal those displayed by the camera of by the camera maker's software. Actual WB values heavily depend on the raw processing and camera profiles used, and because Adobe/ACR uses different ones compared to the camera maker, there may be substantial differences. I think there was a thread somewhere here in the forum about that...

Cannot control size of adjustment brush in Lightroom 5 Develop mode

Whenever I click on the adjustment brush tool in Develop mode, its circle of influence automatically expands to the maximum diameter.
Even when I try to contain the dimensions of the circle via the LR5's size slider or left bracket key, the adjustment brush diameter remains at the max diameter.
Please advise.

This problem is caused by changing the cursor size in the ACCESSIBILITY settings in your OS. Here is a screen shot from the Mac but Windows has similar settings. I reported this in Lightroom 2 or 3 and it is STILL not fixed. (Adobe's bug fixing rate to me is pretty dismal) If you change your system cursor to anything except "Normal" you will get this behavior as Lightroom doesn't account for the system preferences. I would like to make my cursor bigger but this prevents it.

Error - Developer Mode Exception : Lov Input should by default be the query

Similar Messages

Maybe you are looking for