Developer Mode Exception

I am not able to understand what the below exception means,I would like to fix this in the Development environment.Can somebody help me in deciphering the exception.
Developer Mode Exception encountered in item CacNtsCreateNotes Error: The item CacNtsCreateNotes has a maximum length (2000) which is not equal to that of the corresponding VO attribute, AddNote length (4000). Action: Make sure they are equal in size.
Is it got something to do with 2 VO attributes or a VO attribute with some other page component?

Vikram,
The error clearly points, that the bean on your page with id "CacNtsCreateNotes", length is not equal to the attached VO attribute.You need to make the length of bean exactly equal to the VO attribute length.
If this error is coming from seeded code, you can ignore, because developer mode exceptions are anyways not visible to user... in production.. without enabling the corresponding profile option.
--Mukul

Similar Messages

Developer Mode Exception encountered for item.

Hi,
After running the page I am getting following error ,
1. Developer Mode Exception encountered in item CitizenId Error: The item CitizenId has a maximum length (0) which is not equal to that of the corresponding VO attribute, CitizenId length (20). Action: Make sure they are equal in size.
What is the reason behind it?
Thanks & Regards,
Sagarika

Sagarika,
As suggested you can have the attribute length and the item field length as same. Seems you created the item CitizenId and did not enter any maximum length property. So you can enter a value to make it 20.
Sumit

Developer Mode Exception encountered in item EffectiveFrom Error

In Oracle apps , When I click on Configurator Developer, I get this error on the very first page :
Developer Mode Exception encountered in item EffectiveFrom Error: The item EffectiveFrom has a type (DATETIME) which is incompatible with the associated VO attribute, EffectFromAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveTo Error: The item EffectiveTo has a type (DATETIME) which is incompatible with the associated VO attribute, EffectUntilAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveFrom Error: The item EffectiveFrom has a type (DATETIME) which is incompatible with the associated VO attribute, EffectFromAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
Developer Mode Exception encountered in item EffectiveTo Error: The item EffectiveTo has a type (DATETIME) which is incompatible with the associated VO attribute, EffectUntilAsString (VARCHAR2). Action: Make sure they are compatible by either changing the datatype or the attribute associated with the item.
I havent been working in any seeded applications lately . I am working on some other custom application and have depolyed it on server and this error did not occur untill yesterday.
There is a profile option : FND: Developer Mode which is set to nothing on server.
Also I have enabled developer mode to true in zone.properties
could any of this be a problem ?
Thanks
Edited by: user633772 on Sep 12, 2008 11:42 AM

A few doubts :
1. How is it different to set prof. opt. from Func Admin to setting it from Sys Admin ?
2. Do I need apache bounce after this ?
3. I had not touched these p/os and the values for site/user were null from before, so why do I see the error and others do not ?
4. Apart from all the error I posted in this thread I also get some error when I launch configurator from my custom webpage -
error is like this :
The OA passivation framework coding standard has been violated. The view object with full name, CZApplicationModule.TreeViewUsage, is not properly prepared for row insertion. Either setMaxFetchSize(0) or executeQuery() (or any equivalent method that ends up executing the view object query) must be called on the view object before new rows are inserted. For a detail view object in a master - detail relationship, executeQuery() (or any equivalent method that ends up executing the view object query) must be called instead of setMaxFetchSize(0) on the detail view object before new rows are inserted into the detail view object. setMaxFetchSize(0) call on the detail view object could cause a number of adverse effects.
Thanks

Error - Developer Mode Exception : Lov Input should by default be the query

How to get rid of this message?

Full error message
Lov Input should by default be the queryable criteria and Result

Development mode error

Developer Mode Error: Stale Data
The requested page contains stale data. This error could have been caused through the use of the browser's navigation buttons (the browser Back button, for example). If the browser's navigation buttons were not used, this error could have been caused by coding mistakes in application code. Please check Supporting the Browser Back Button developer guide - View Object Primary Key Comparison section to review the primary causes of this error and correct the coding mistakes.
Cause:
The view object XxEmployeeAM.XxEmployeeSearchVO1 contained no record. The displayed records may have been deleted, or the current record for the view object may not have been properly initialized.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
can you please help me with this error,that will be helpful to me
i am using jdeveloper version 12.1.3

package xxcuso.oracle.apps.fnd.emprec.server;
import oracle.apps.fnd.framework.server.OAApplicationModuleImpl;
import oracle.jbo.Row;
import xxcuso.oracle.apps.fnd.emprec.server.XxEmployeeSearchVO1Impl;
import xxcuso.oracle.apps.fnd.emprec.server.XxEmployeeVO1Impl;
import xxcuso.oracle.apps.fnd.emprec.server.XxEmployeeVO1RowImpl;
//import java.lang.Number;
import java.lang.String;
import oracle.jbo.domain.Number;
import xxcus.oracle.apps.fnd.emprec.server.XxEmployeeSearchVOImpl;
import xxcus.oracle.apps.fnd.emprec.server.XxEmployeeVOImpl;
//import oracle.jbo.domain.Number;
// --- File generated by Oracle ADF Business Components Design Time.
// --- Custom code may be added to this class.
// --- Warning: Do not modify method signatures of generated methods.
public class XxEmployeeAM1Impl extends OAApplicationModuleImpl
/**This is the default constructor (do not remove)
public XxEmployeeAM1Impl()
public void searchEmployee(String empNum, String empName) {
try {
XxEmployeeSearchVO1Impl vo = getXxEmployeeSearchVO1_1();
vo.setMaxFetchSize(-1);
vo.setWhereClause(null);
vo.setWhereClauseParams(null);
vo.setWhereClause("EMPNO = nvl(" + empNum + ",EMPNO)" +
"AND UPPER(ENAME) like UPPER('%" + empName + "%')");
System.out.println("search query - " + vo.getQuery());
vo.executeQuery();
} catch(Exception e) {
e.printStackTrace();
public void initCreateEmp() {
try {
XxEmployeeVO1Impl empCreateVO = getXxEmployeeVO1_1();
empCreateVO.setMaxFetchSize(0);
XxEmployeeVO1RowImpl row = (XxEmployeeVO1RowImpl)empCreateVO.createRow();
// here we are setting the employee number using a DB Sequence
Number empNum = (Number)getOADBTransaction().getSequenceValue("EMPLOYEE_NUMBER_S");
row.setEmpno(empNum);
empCreateVO.insertRow(row);
row.setNewRowState(Row.STATUS_INITIALIZED);
} catch (Exception e) {
e.printStackTrace();
public void initUpdateEmp(String empNum) {
try {
XxEmployeeVO1Impl employeeVO = getXxEmployeeVO1_1();
employeeVO.setWhereClause(null);
employeeVO.setWhereClauseParams(null);
employeeVO.setWhereClause("EMPNO = :1");
employeeVO.setWhereClauseParam(0, empNum);
employeeVO.setMaxFetchSize(-1);
employeeVO.executeQuery();
} catch (Exception e) {
e.printStackTrace();
public void commit() {
try {
XxEmployeeVO1Impl employeeVO = getXxEmployeeVO1_1();
XxEmployeeVO1RowImpl row = (XxEmployeeVO1RowImpl)employeeVO.first();
String savedEmp = row.getEmpno().toString();
getOADBTransaction().commit();
//return savedEmp;
} catch (Exception e) {
e.printStackTrace();
/**Sample main for debugging Business Components code using the tester.
public static void main(String[] args)
launchTester("xxcuso.oracle.apps.fnd.emprec.server", /* package name */
"XxEmployeeAM1Local" /* Configuration Name */);
/**Container's getter for XxEmployeeSearchVO1_1
/* public XxEmployeeSearchVO1Impl getXxEmployeeSearchVO1_1()
return (XxEmployeeSearchVO1Impl)findViewObject("XxEmployeeSearchVO1_1");
/**Container's getter for XxEmployeeVO1_1
public XxEmployeeVO1Impl getXxEmployeeVO1_1()
return (XxEmployeeVO1Impl)findViewObject("XxEmployeeVO1_1");
public XxEmployeeSearchVO1Impl getXxEmployeeSearchVO1_1()
return (XxEmployeeSearchVO1Impl)findViewObject("XxEmployeeSearchVO1_1");
/**Container's getter for XxEmployeeVO1_1
public XxEmployeeVO1Impl getXxEmployeeVO1_1()
return (XxEmployeeVO1Impl)findViewObject("XxEmployeeVO1_1");
}

Developer Mode Error

Hi everyone,
I'm trying to find out what I did wrong closing the connection after calling a Stored Proc, the stored works fine and it made the update and others intructions, the problem comes when I whant to reload some VO's before they data was updated.
Here's the error:
Developer Mode Error - The database connection in the AppsContext object associated with the root application module's transaction has changed while the application module was in use. Cause: This could have been caused if application code called releaseJDBCConnection(), logOut(), or freeWebAppsContext() on the AppsContext object. Note that the AppsContext's JDBC connection is referenced and used by the application module's transaction. Action: Check your application code and remove these calls if the AppsContext was handed out from OADBTransactionImpl.getAppsContext(). (This developer mode check cannot detect the release event, if the same connection instance got checked out again through the getJDBCConnection call on AppsContext after the release.).
and here's my code in the AM
public void methodExample(String famEX){
Connection con = getOADBTransaction().getJdbcConnection();
CallableStatement cs = null;
for(blah blah blah){
if( blah blah){
try{
cs = con.prepareCall("begin dbEschema.SP_Example_Update_Proc(?,?); end;");
//some instructions
//declare and enter the "IN" values
int p_Id_Fam = (Integer.parseInt(famEX));
String p_Item_Id = r.getItemId();
cs.setInt(1, p_Id_Fam);
cs.setString(2, p_Item_Id);
//Execute the procedure
cs.executeUpdate();
cs.close();
con.close();
}catch(Exception e){
System.err.println("Exception: "+ e.getMessage());
}finally{
try{
if(cs != null)
cs.close();
if(con != null)
con.close();
}catch(Exception ex){
System.err.println("2nd Exception: "+ ex.getMessage());
cs = null;
con = null;
I wonder what can be the mistake, I hope you can help me
Regards,
Mentor
Edited by: mentor on 9/08/2010 03:29 PM

Thanks Ajay, Reetesh
I found another way to call without any problem the StroredProc from AOF, this can be helpful for another users.
OADBTransactionImpl oadbtransactionimpl = (OADBTransactionImpl)getDBTransaction();
Row[] rows = getacDVO1().getAllRowsInRange();
for(int i = 0; i < rows.length; i++){
acDVORowImpl r = (acDVORowImpl)rows;
StringBuilder procedureCall = new StringBuilder();
if(r.getSelected().equals("ON")){
try{
int p_Id_Cat = (Integer.parseInt(String));
String p_cve = r.getYourElements();
procedureCall.append("begin SCHEMA.YOUR_STORED_PROCEDURE('").append(p_Id_Cat);
procedureCall.append("', '").append(p_cve_ac).append("'");
procedureCall.append("); end;");
OracleCallableStatement oraclecallablestatement = (OracleCallableStatement)oadbtransactionimpl.createCallableStatement(procedureCall.toString(), -1);
oraclecallablestatement.execute();
getOADBTransaction().commit();
}catch(SQLException sqlexception){
System.err.println("SQL Exception: "+ sqlexception.getMessage());
getOADBTransaction().rollback();
throw OAException.wrapperException(sqlexception);
}catch(Exception e){
System.err.println("Exception: "+ e.getMessage());
getOADBTransaction().rollback();
throw OAException.wrapperException(e);
I hope this example can be very useful to this community
Best Regards,
Mentor

Develop Mode Auto Adjustments

Hello,
When I am loading RAW files in to LR, in the Develop mode they start off as a pretty flat image (as I shot them) but then LR slowly adjusts each photos as it loads which looks like it is bumping the saturation and contrast then lowering the exposure.
What are these auto adjustments and how can I turn them off? I would rather edit my images as shot in camera, not after LR makes its own adjustments without my help.

Ryan.Polei wrote:
This doesn't happen in Bridge
The difference: Lightroom is a raw editor, Bridge is not.
So, Bridge shows you what the camera did (if unedited raw file) instead of what it would look like with Lightroom edits. And Lightroom edits have to start somewhere, and that somewhere CAN'T be the same as the jpeg, or the same as another raw editing software (they use different settings, different software, different starting point..).
Don't get me wrong: I think Adobe should have better support for displaying embedded preview / sidecar jpegs (which is what Bridge does), and have an option to detect in camera profile setting and select a "nearest fit" Lightroom profile, but none of that will change the basic "deal" - different software, different settings, different starting point...
Note: this may seem odd to you now, but it's how all proprietary raw editors work, i.e. all those except the camera manufacturer's own (or those using the camera manufacturer's raw-rendering toolkit under the hood, instead of it's own), which emulates in-camera settings pretty-much exactly - no others can interpret a custom picture style, granted some may try to start with a somewhat closer look.
To review: all proprietary raw software does the same thing: interpret raw data according to invented algorithms and settings. That's what Lightroom software does, and that's what Capture NX2 does (and that's what your camera firmware does to come up with the jpegs), but they are different software, with different algorithms, which use different settings.
So your choices are:
* shoot jpeg
* use the camera manufacturer's software to process, or
* wean yourself from custom camera styles and learn to setup Lightroom processing instead.
PS - I recommend the later. Actually, you can use a plugin to somewhat translate camera settings to Lightroom settings, but I don't recommend doing it, because it tends to prolong your dependency on camera settings, rather than wean.
My advice? - Learn to use Lightroom (and get it set up optimally for your druthers) for post-production, and forget about camera settings whilst shooting (except for exposure and focusing etc., of course). Then, delete all the custom profiles you created in your camera, for therapeutic purposes .
Rob

In Develop Mode, always Display As Shot White Balance

When adjusting WB for RAW images in Develop Mode, it would be really useful to have the As Shot WB visible in RH Pane, along side the Custom WB or other adopted WB.

and I guess, just undo after changing to As Shot, or is there someway more elegant?
I don't completly understand that... Do you mean that you just want to quickly review what the WB in your camera was for the photo, but you want to retain the custom WB setting that you made during developmen? If that is the case, yes, undo afterwards seems to be the best thing to do. If I remember correctly, there is no place in the metadata panel where one can view the original WB information (I don't have LR at my disposal at present).
The same should be true for the flash info, but I am not 100% sure about that right now. Look for it in the metadata panel switched to "EXIF". If an information is not there, it is probably not available in LR elsewhere (except perhaps via a plugin).
Note: The WB values (temp, tint) of "As Shot" do not necessarily equal those displayed by the camera of by the camera maker's software. Actual WB values heavily depend on the raw processing and camera profiles used, and because Adobe/ACR uses different ones compared to the camera maker, there may be substantial differences. I think there was a thread somewhere here in the forum about that...

Cannot control size of adjustment brush in Lightroom 5 Develop mode

Whenever I click on the adjustment brush tool in Develop mode, its circle of influence automatically expands to the maximum diameter.
Even when I try to contain the dimensions of the circle via the LR5's size slider or left bracket key, the adjustment brush diameter remains at the max diameter.
Please advise.

This problem is caused by changing the cursor size in the ACCESSIBILITY settings in your OS. Here is a screen shot from the Mac but Windows has similar settings. I reported this in Lightroom 2 or 3 and it is STILL not fixed. (Adobe's bug fixing rate to me is pretty dismal) If you change your system cursor to anything except "Normal" you will get this behavior as Lightroom doesn't account for the system preferences. I would like to make my cursor bigger but this prevents it.

Development mode problem

Hi,
We are using weblogic 6.1 SP3 and are having a problem when redeploying applications
in development mode.
We register a number of custom MBeans using a managemen.war which has a "<load-on-startup>"
line in its web.xml descriptor. We do this so that the MBeans get created and
registered a deployment time.
The war is normally packaged within an ear and when I copy a new ear into the
'applications' directory I get a series of class not found exceptions relating
to classes used by the mbeans.
What I am assuming is that when an ear is updated, the weblogic server attempts
to re-initialize its list of mbeans ?
Anyone know what happens internally when an application is re-deployed ?
We get the same problem when redploying any ear in the applications directory
and I have also got the problem if I extract the management.war and deploy it
separately ( i.e. not within our ear )
Any help would be appreciated.
Thanks,
Paul.

Where does the Schema class live?
I am ataching 1 example, one in an ear, the other is the same webapp just
standalone. The use custom JMX and register the mbeans, note that the
classes for the mbeans are down in the WEB-INF/classes.
I am not sure if these ear and web apps will work on 6.1, but these both
deploy fine on 8.1
The only thing you might have to tweak is deployment descriptor dtd.s
Cheers
mbg
"Paul" <[email protected]> wrote in message
news:[email protected]...
>
Hi,
Thanks for the reply,
Our ear contain 2 ejb.jars and 3 wars, the war we use to register ourcustom mbeans
can be deployed separately (i.e. not within the ear) so it does not have aclasspath
line in its manifest file.
We use the following line to get a reference to the mbean server
mbeanServer = (MBeanServer) new InitialContext().lookup(weblogic.management.RemoteMBeanServer.JNDI_NAME);
>
we then register mbeans using code similar to this
mbeanServer.registerMBean(mbean, mbeanName);
I have attached a sample of the exception, the exception repeats for allof our
custom mbeans, the listing shows the server getting a class excecption forone
of our custom mbeans called "Schema"
Thanks,
Paul.
"Mark Griffith" <[email protected]> wrote:
What is the topology of your ear. ie. where does stuff live and manifest
classpath.
How are you "regestering" mbeans.
What is the exception and the full stack?
mbg
"Paul Ryan" <[email protected]> wrote:
Hi,
We are using weblogic 6.1 SP3 and are having a problem when redeploying
applications
in development mode.
We register a number of custom MBeans using a managemen.war which has
a "<load-on-startup>"
line in its web.xml descriptor. We do this so that the MBeans get
created
and
registered a deployment time.
The war is normally packaged within an ear and when I copy a new ear
into the
'applications' directory I get a series of class not found exceptions
relating
to classes used by the mbeans.
What I am assuming is that when an ear is updated, the weblogic server
attempts
to re-initialize its list of mbeans ?
Anyone know what happens internally when an application is re-deployed
We get the same problem when redploying any ear in the applicationsdirectory
and I have also got the problem if I extract the management.war anddeploy
it
separately ( i.e. not within our ear )
Any help would be appreciated.
Thanks,
Paul.
[jmxEar.ear]
[jmxWebApp.war]

Corruption in LR Develop mode

Greetings,
I'm on a Mac Power PC running OS 10.5.5 with 6.5 GB RAM on LR 2.1. I am shooting with a Canon 1ds III on SanDisk Extreme IV 4.0 GB cards.
Sometimes I get a rainbow-colored corruption on part or most of an image while working with an image in the develop mode. I recently upgraded to LR 2.0 and was hoping that it would clear up what was happing in LR 1.0 but it has not.
The only good news is that when I restart the computer and then relaunch LR, the corruption disappears before my eyes. In other words, when the image is "loading" in LR's develop mode, the same corruption is there momentarily but then vanishes once the image has fully "loaded."
Any thoughts?
Let me know if I can provide more information as I'm sure I have not provided enough. I have a screen capture I can email (or post if I knew how).
Thanks,
Scott

Hey Martin,
I can't get your first link to work but what I get is a square or rectangular-rainbow-digital gobbeldigook usually starting from the lower right corner of the image covering anywhere from 5% to 90% of the image.
At the moment, I'm exploring the possibility that mine is RAM-related. I'm able to recover the flawed images after a restart. This points me to a problem with my Mac or the LR software. I could be wrong so take this with a grain of salt.
Anyway, I purchased online (for a buck and change) "Memtest OS X". It checks your RAM for errors/flaws. After running the program, it turns out I have a bad RAM chip in my desktop machine and so I have of course removed it. So far, with working all day today on post, I have had no problems (knock wood). This is by no means final in my mind however and I'm going to continue to cross my fingers and hold my breath for a little while every time I open an image in the develop mode of LR.
I hope this might lead you somewhere as well. I'll report back later after I've had some time to test the waters.
Any luck on your end?
Scott

Starting Weblogic Server in Development Mode

Hello,
How can I start a managed server in development mode? I set STARTMODE=false in
the StartManagedServer.cmd. However, this did not work. Any ideas? Thanks in
advance.

收到，谢谢！
内容不错

JDeveloper IDE: Developer Mode Error

Hi All,
I am facing an issue after launcing JDEV through /jdevbin/NT/1223_db2dbg_17007206 (JDeveloper IDE for Release 12.2.3 Dev Build 2).
I am getting developer mode error after launcing my application. For the error to perish, we need to disable the same by :
Go Project Properties -> Oracle Applications -> Run Options and remove OADeveloperMode from the selected list.
However the OADeveloperMode option is not visible at project properties. Any idea on how to disable the option through any other means or any workarounds.
The profile “FND:Developer Mode” is already set to No in site level in environment. I am still seeing the Developer Mode error in jdev.
Thanks in advance.
Regards,
Arpita

Hi Shobit,
Error message :
(This developer mode error is thrown instead of being registered due to the lack of the page context object.) The OA passivation framework coding standard has been violated. Web bean properties cannot be modified in the controller processFormData or processFormRequest method. Web bean properties should be modified in the processRequest method only. An attempt to modify a web bean has been made in the following call stack: java.lang.Throwable at oracle.apps.fnd.framework.OACommonUtils.getCallStack(OACommonUtils.java:822) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.setAttributeValue(OAWebBeanHelper.java:1857) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.setAttributeValue(OAWebBeanHelper.java:1891) at oracle.apps.fnd.framework.webui.OAWebBeanFormElementHelper.setAttributeValue(OAWebBeanFormElementHelper.java:2108) at oracle.apps.fnd.framework.webui.beans.message.OAMessageLovInputBean.setAttributeValue(OAMessageLovInputBean.java:616) at oracle.cabo.ui.beans.form.TextInputBean.setRequired(TextInputBean.java:441) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:743) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursiveInternal(ClientUtil.java:864) at oracle.apps.po.common.webui.ClientUtil.setViewOnlyRecursive(ClientUtil.java:704) at oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO.setPageReadOnly(ClaimUpdateCO.java:425) at oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO.processFormRequest(ClaimUpdateCO.java:239) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:854) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(OAPageLayoutHelper.java:1241) at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(OAPageLayoutBean.java:1579) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1066) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1032) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:887) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(OAFormBean.java:395) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1066) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(OAWebBeanHelper.java:1032) at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(OAWebBeanHelper.java:887) at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(OAWebBeanContainerHelper.java:385) at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(OABodyBean.java:363) at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(OAPageBean.java:3113) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1897) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:558) at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:446) at _OA._jspService(_OA.java:72) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:473) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:734) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:226) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:127) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:116) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303) at java.lang.Thread.run(Thread.java:662)
This error part of the file (oracle.apps.ozf.oa.claim.webui.ClaimUpdateCO) present in the error message is an already existing code.
Now the problem with solving this issues may end up solving many other issues. I am also not sure that my solving one part will fix it or not.
If you can please help me with suppressing the option how we used to do that earlier via jdev, then I can move ahead with my changes and test them.
Thanks,
Arpita

Issue in Develop mode for embedding google map

Hello,
I am facing an interesting issue in Develop mode for embedding google map html code (screenshot is attached)
The map rectangle showing almost same size box underneath filled in black, while in preview mode, it is working properly. I could not find the reason, where I am doing something wrong.
Many thanks .

Hi Muzeone,
Its a default behavior with every WYSIWYG HTML Designer or editor,
Reason :The black box which is appearing in the design view is because you might have tried increasing the size of the iframe thumbnail.
If you are using Iframe and using Insert HTML feature in MUSE, make sure when you paste the iframe code in MUSE, it creates a thumbnail in design view do not resize it in design view.
Size does not change the height and width of Iframe in MUSE as its being controlled by the codes that you are inserting.
The design view will only show you iframe height which is defined in the codes below that it will show a black box.
Enjoy working with MUSE !!
Thanks
Prabhakar Kumar

Lightroom 4 Bug: can only see photos in Library mode, not develop mode

This may be related to other imported catalog bugs, but does not seem to be quite the same. In Lightroom 4, with an upgraded Lightroom 3 catalog:
1. Select a photo in Library mode.
2. Click on Develop to go to Develop mode
Screen shows "No photo selected". I cannot edit photos in Develop mode.
I can see and edit photos that are found in smart collections, but not photos that are simply in my collections from 2012, 2011, etc. folders

This happened to me, too, after importing a couple older LR3 catalogs (upgrading/consolidating). I could see the photo in Library module but when I pressed "D" (single photo selected) I was getting the "no photo selected" error message--for every photo I tried. I wasn't able to open any photos at all in the develop module. (These were photos that were fine before installing LR4 and upgrading.) Photos were from imported LR3 and LR4 Beta catalogs.
I restarted and everything seems ok--for now!
So if you come across this thread with this same issue, restart and see if that helps. (Before restarting LR I optimized as suggested above, which did nothing for the "no photo selected" issue. And this isn't related to the parent folder issue, I left my photos in the same place and didn't have more than 3k photos in any of the parent folders. I read in other threads that people had the issue again after importing other catalogs. I'm about to do that so I'll report back.

Developer Mode Exception

Similar Messages

Maybe you are looking for