Error:Lov Input should by default be the queryable criteria and Result

Hello,
I have a LOV Which displays the Locations.It has 2 columns Location_id and Location_Name.This LOV is attached to a field named "LocationName".Requirement is to show the existing location name based on the location id of the employee that is queried before updating the employee details.
The programatic Query property of the associated LOV map is set to True as i need to bind the query with the location_id at run time. However this gives me the following error message when the page is opened :
Lov Input should by default be the queryable criteria and Result
Can you please let me know what need's to be done?
Regards,
GayatriJ

Normally you will get this error, when you didn't give LOV field as the criteria item in the LOV mappings.
Check you have given the LOV field as one of the criteria mapping for the LOV.
Thanks.
With Regards,
Kali.

Similar Messages

Error - Developer Mode Exception : Lov Input should by default be the query

How to get rid of this message?

Full error message
Lov Input should by default be the queryable criteria and Result

Windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

windows vista system, continuously trying to download a DRM file in Adobe Digital Editions application shows "Error check activation". I have authorized the Fire Wall and still the same.

Since Re-activation as suggested by the link above is not working for you, Can you please confirm the following:
The OperatorURL is reachable. ( you can find the operatorURL from the acsm file by opening it in notepad,etc)
And Book is still available on the book-store for purchase.
(If any of first two are not available, you might have to talk to distributor for next action item to get the book. Since you will have record of purchasing the book, (in my opinion) they should provide you the new token for downloading the book)
And please confirm this that you used the same userID for downloading that you used when you first fulfilled/downloaded the book.
(If it is the case, then you have to use the correct userID)
I hope it helps.

I have several Outlook accounts and want to switch between them but Firefox defaults to the main one and won't let me access the others.

Outlook now makes me sign out and sign back in to each of my email accounts. When I try to sign back in, it defaults to the main account and won't let me type in the other email addresses. This only happens in Firefox, both Google and IE leave the email address blank and let me type in the one I want to access. I'd rather use Firefox, but it doesn't let me type in a different email address. Can I fix this?

This can be caused by corrupted cookies or cookies that are blocked (check the permissions on the about:permissions page).
*https://support.mozilla.org/kb/fix-login-issues-on-websites-require-passwords
Clear the cache and the cookies from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
If clearing cookies doesn't work then it is possible that the cookies.sqlite file that stores the cookies is corrupted.
Rename (or delete) cookies.sqlite (cookies.sqlite.old) and delete other present cookie files like cookies.sqlite-journal in the Firefox profile folder in case the file cookies.sqlite got corrupted.
*http://kb.mozillazine.org/Cookies
*https://support.mozilla.org/kb/Deleting+cookies

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
== URL of affected sites ==
http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
Brianeng

When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing

When I was updating my ipod touch 4g 8g 4.3.3 the USB came out and now it just shows connect to itunes and when i try to update it comes with error 6. I do all of the help things and nothing happoned

First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem.

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotfo

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

Hi I want to create a search form with drop down search criteria. This form should then search on the same site and display the search results. Is there HTML available for this? Or an oline site that I can use to build this form? I created a form in Jotform.com, but this form doesn't search the site, instead it sends me an e-mail. Do you have a solution for me? Thanks.

Error while adding a used relationship between the New DC and the Web DC

Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
Satish

Hi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish

TS5376 I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions above and now I can't get past the Service 'Apple Mobile Divice failed to start. Help!!!

I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
V/r "TRACER"
CDR Harold W. "TRACER" Valentine, SC, USN

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

What type of input should be provided to the proxy function module HR_trv_credit_card_transaction

Hello All,
I am trying to configure the proxy for credit card transaction in Trip module,For this the standard proxy class is being used. I am not able to find out what should be the input to the function module Hr_trv_credit_Card_transaction. This relates to some control structures.Does anybody has some idea on this.
Many thanks
Papiya

Hello,
The manual on page A-3 has some useful information. I am posting it below. Additionally, I found that the SCXI-1104 series use a two-pole RC Butterworth filter. As you'll see in the notes below the 10kHz cutoff is the -3dB point for the filters.
Filters
Cutoff frequency (?3 dB)
SCXI-1104 ............... 2 Hz
SCXI-1104C ............. 10 kHz
NMR (60 Hz) ............ 40 dB (SCXI-1104)
Step response (either gain)
Accuracy SCXI-1104 SCXI-1104C
To 0.1% 1 s 200 ms
To 0.01% 10 s 1 ms
Hope this helps,
John N
Applications Engineer
National Instruments

What sort of input should be given to the FP-DO-410 module to generate discrete output

We are using a FP-DO-410 module for creating discrete output.Can we use it to generate swept square wave pulses

Hi,
You can generate a "square wave" with the FP-DO-410, but this is not normally the way this module is used. This module contains "static digital output", which means you can only write true or false, in other words, you cannot exactly control the frequency of the output signal, if you want to have control of the frequency you normally use a counter module (FP-CTR-50X) or even better a FP-PG-522... these modules have their frequency hardware controlled...
You can create a square wave with the FP-DO-410 but in that case you will have to create the square wave via software and the frequency will be software dependent, connection dependent and so on... the final result will be very poor (no practical use)...
So, if you want to create square wave I
would advise the FP-PG-522.
I hope it helps
Best Regards
Andre Oliveira

HT204053 I have reset my apple ID and the password, but I am still getting an error message saying: wrong account associated with the current ID and password! Any thoughts as to why?

I have reset my apple id and password, but I am still getting an error message indicating, "wrong account associated with this id/password" !!!
Any thoughts as to why?

What exactly do you mean by the statement that you have reset your Apple ID and password. I am not familiar with being able to reset and Apple ID.

I get this error message, (Error code: sec_error_ocsp_future_response), but my computer has the correct date and time.

After getting this error message, I checked the date and time on my computer. That is not the problem.

You can also check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

TS1702 I have added to my Callander an long event (holiday) that crosses a month boundary. Now when I want to school into the second month, the screen defaults to the icion screen and dose not show what I am expecting. Glitch or fault? Geoff Lamd

I have added to my calendar a long event (holiday) that crosses a month boundary. Now when I try to school from one month to the next, I am booted back to the icon screen. Is this a glitch or a fault? Geoff Lamb

Is it crossing the end of March 2013 ? If it is then there appears to be a problem with all day events on the 1st April 2013 due to clocks changing for daylight saving - if it does include 1st April 2013 then try changing it to end on 31st March 2013 and have a second entry for 1st April onwards (starting at something like 4am on the 1st)

PlZ HELP: How can i format a Macbook without the originals cds and results

Hello
I have a macbook since a couple of years running 10.5.8 OSX. the last months the system is getting a bit slower and since i bought a midi controller which is arriving today i am thinking of making a format. But i havent the original cds. So here are some questions for u mates and plz consider me as a total amateur.
1. Will a format make the performance of my macbook back to its original state when i bought it, like it is done with a pc format?
2. I have ordered this: Mac OS X Snow Leopard International 10.6.3 (upgarde from Leopard). will i be able to do a format with that or i have to oder the original cds (i understand that i will loose iLIfe)
3. I have some programs installed in my macbook and i have some bookmarks i really work with them. so i am thinking of using time mashine before and after format. Should i do that or if i do that then the format thing has no point at cause the macbook will be slow like it is now??
Thank u all for your patience and i really hope u will help me.

Call Apple, givre them your serial number and they will send you the original install disks only charging for shipping & handling. You should always have those.
1. A re-format will make your Mac volume blank, after re-installing it would be back to original defaults, but it is usually unnecessary, unless you are experiencing insurmountable problems.
2. Yes, you will be able to format & install. But like I said, you're better off just upgrading.
3. You should always have a backup either TM or SuperDuper or CarbonCopy Cloner. The value of these cloning apps, is that you can boot from them in case you get into trouble on your main drive.
Before you install run Disk Utility > Verify Disk. If you find errors repair until no errors are found.
SuperDuper or CarbonCopy Cloner.
-mj

Error:Lov Input should by default be the queryable criteria and Result

Similar Messages

Maybe you are looking for