Error documented goods movements

Hello PP experts
I have done the good issue of the components of a process order.
If I ckeck it in the order in Lits-> documented goods movement, sytem showe me an error 'There is no data for the selection'
What is wrong? why does not show me the movements of good issue?
Thanks in advance

Dear
Order type dependent parameters- Implementation tab - Documentation of goods movements - Make tick mark for all.

Similar Messages

Process inst cat cons_1 documented goods movement in cor3 not updated

Dear Gurus, i have sent the cons_1 process inst cat to pi sheet and then send the related process message using co54. in order withdrawn qty is updated, but documented goods movement is not updated. please advise what should be done in order to update the documented goods movement in cor3?

Hi,
Check in CO54 whether all your messages are successfully sent or not . Ensure there are no errors as shown below..Check and revert...
Thanks
Kumar

Not able to see the documented goods movement

Hi ,
The Problem is I cannot see the documents against the same combination of the order type and Plant for Ceratin period but can see the documented goods movements against the same orders for some other period.

Hi,
Check in OPL8, whether the Documented Goods Movemets is maintained or not.
This in the Second Tab page: Implementation.
Revert for further discussion..
Regards,
Siva

Error in Goods Movement during order confirmation

Hi,
I am trying to confirm a production order through CO11n,but i am getting an error in Goods Movement .
The following message is displayed in the log - "* Posting only possible in /11 anperiods 2008d 2008/10 in company code A100*". Can any one guide me what should i do to confirm the order without any error in Goods Movement,
Thanks in advance.

Hi,
It is advisable to correct the Goods Movement Errors in COGI in the same period (before closing the period by MM in MMPV). You cannot correct the same if the period is closed.
Only option is you need to open the closed period in consulatation with FI and MM team members
OR
Delete the Error movement records in COGI and post the Goods Issue for the production order in Tcode : MB1A with movt type 261 and go inside and mention the materials which you want to issue to the order.
Hope this will help you.
regards
radhak mk

Error in Good Movement

Hi SAP Gurus,
I have got a error in Goods Movement. For Production Order no.xxxxxxxxx, there is no error in the COGI report, but if we check it in one of the customized report called Valuated Goods movement failure there is a error for the said Order no. But it is not showing any reasons. I checked it in the database table also. There also the error exist, but it is also not giving any reason. Actually what the user did is they did cancel the confirmation for this Order no for certain quantity.
Can anyone tell me what should be the reason and how to solve it?
Regards,
Rinky

Hi Andreas,
Thanks for ur reply. actually the user canceled a Confirmation for certain qty. That canceled confirmation is not re-confirmed. when i check in CO14 - Display Production Order Confirmation against the canceled operation/counter no. It says "Highlighted items need to be processed". How to come to the conclusion that what to do next. how to identify the error. In my customization in OPK4 we have maintained,
Operation sequence   Error when operation sequence is not adhered t
Underdelivery             Underdelivery tolerance is not checked
Overdelivery               Error when overdelivery tolerance is exceeded
QM results rec.         Message if no inspection results exist
So, could you tell me how to solve this?
Regards,
Rinky

DOCUMENTED GOODS MOVEMENT FOR COLLECTIVE ORDER

Hi Guru's
In the 4.6C version
If i got to Production order from transaction code CO03 , Read the collective order , highlight the toplevel item and ''GOTO'' in the menu bar and select Documented goods movement , the display shows the Top level order AND the Sub-Assemblies.
( sub-assemblies goods movement with main assembly can be seen in the single screen)
In the ECC 6.0 Version
If i got to Production order from transaction code CO03 , Read the collective order , highlight the toplevel item and ''GOTO'' in the menu bar and select Documented goods movement , the display shows the Top level order only.
To see the Goods Movement in the Sub-Assemblies you have to go to each production order individually.
can this be changed in ECC 6.0 exactly to that seen in 4.6c version .
pls give me your valuable inputs at the earliest .
Thanks for your help.
Regards
satish k

Hi satish,
In collective order struture ,Automatic goods movement will be happened between toplevel & lower level.
Please check with "coll order goods mvt" settings for order type at OPJH For ECC 6.0 version.
Please also check with cost analysis for Goods movement.
Regards
Pradeep

Error: dependent goods movement was incorrect

Hi,
Can anyone help me please correct this error "dependent goods movement was incorrect" (message no. RU 523). I have encountered this error upon confirmation.
Thanks.
Regards,
Ching

This error is noticed when production storage location between parent and child in direct production(special procurement
key - 52) is_ NOT_ similar i.e. mismatch of storage location
Example:
Production Order A {Collective parent structure production storage location: 0001}
|
|
|
Production Order B {Collective child production storage location: 0002}
In above scenario, prod. sloc is 0002 for child while 0001 for parent, which inturn results in COGI error with error message TYPE RU 523
Steps performed for correction:
1. Cancel the production order confirmation for component
2. In co02, edit the goods reciept sloc for component under goods reciept tab such that it matches with parent production order storage location
3. Redo the confirmations for the component production order and reprocess the COGI

Documented Goods Movements COR3

Hello dear gurus:
I need your help, when I made a goods movements (261) with transaction COR6N, I can see the documented goods movements in COR3 (GoTo>List>Documented Goods Movements), but if I made the goods movements with transaction MB11 or any other I can't see the documented goods movements in COR3, If I checked the MB51 I can see all the Goods movements. (261 and 101).
Is there any way to make all the goods movements reflected in COR3???? no matter which transaction I use?

Adrian,
You are right. You need to activate the check box for "Unplanned Goods Issue" & "Goods Recipet for Purchase order"(Incase of non-stock Items). Now you would get the list of all goods movement document against the order.
Just have another suggestion, from your problem it appears that the goods Issue you are making using MB11 is not going as planned Issue. This is basically a simple transaction processing mistake, in MB11 transaction after entering plant/movement type/posting date click the "To order", in the pop-up screen input your order number and then click to adopt the details. Now if you post the goods Issue, even now i think you would be getting the document list in COR3 without making changes in COR4.
I think currently your users (or you) in MB11 transaction after entering entering plant/movement type/posting date details you are pressing Enter key and you are entering manually the process order number in the goods movment screen, if this way it is performed system would consider this as an unplanned Issue. The problem with this type of Issue is that it wont update the withdraw quantity against the reservation.
Regards,
Prasobh

Documented goods movements list in cooispi.

Hi,
Even though there are goods movements w.r.t. process order, they are not getting displayed in cooispi in the List - Documented Goods Movements. What could be the reason for this?
Thanks a lot..
Madhavi S

Hi Madhvi,
U can also the "Documented good movement" at header view of Process order .
Please also check with "documentation of goods movement" settings at COR4 for process order /plant combination.
Activate all the check boxs under Document good mvt table at Implementation tab in COR4 & create new order and do goodsmovement check with cooispi.
Pradeep
Edited by: Pradeep Kumar on Apr 9, 2008 10:15 AM

Error in goods movement during confirmation

I get an error while doing the goods movement during confirmation stating that posting is not possible during that period.

Hi,
If it is MM Posting period problem then check in MMRV and MMPV ..
In MMRV - u can allow posting to previous periods
In MMPV -U can close and open periods i think
If it is CO posting period problem then check in OB52 , Here to get posting period variant for your company code from OBY6 and input in OB52 and check for all accounts the periods , change the periods accordingly for the year..
regards
pushpa

Co02-Documented Goods Movement

Hi,
I have done goods movement i,e Goods Issue in CO11N.
But I could not see Details in Doucmented goods movement.
I have done SPRO settings for the same in OPL8-Implementation-Documentation of Goods Movements.
Is there any thing else to be done.
Regards,
somiraghu

Dear Raghu,
i think Backflush is not activated, just check in CO14, inputting the order number &
Check the Goods movement tab whether components exists or not ( 261 movement type)
Regards
Madhu

Error in goods movement

HI
For goods movement of a production order we have batch control for all the products but it is creating problem for a single product.What could be the probable reason.
Regards,
PradeepM.

1. You have not given what the exact issue - so kindly post the exact issue.
2. Since you are telling that only one mateiral is having problem then surely it would be becuase of Master Data.
Also check all the master data setting forthat material.
reg
dsk

Error in Goods movement BAPI_GOODSMVT_CREATE

I am using the BAPI_GOODSMVT_CREATE.
I am appendign 10 records to my table and executing the BAPI.
It is executing successfully for the first 2 records.But for rest 8 records i am getting an error "Content of order 1000030903 : 6211300 transferred to interfa (IMSEG): 6211301"
where 1000030903 is my Order number and 6211301 is my Material Number.
Can somebody has got this kind of error.

Hi,
Please check and format your table data before sending it to bapi. I mean to say u might be missing conversions or validations for some fields.
I guess the data you are passing in first two lines meets thee bapi requirement without any conversions, whereas same is not the case with other lines od data.
I hope this will help you in resolving this issue and close it.
Appreciate if found helpful!!!
Regards,
Vinit

Number range error in goods movement BAPI

Dear friends
we are using the BAPI BAPI_GOODSMVT_CREATE to create a material reservation with movemnet type 201. although all the fields are maintained properly i get an error number 136 - number range different. i checked the number range and found it to be ok. can anyone please help me out
thanks in advance
Gurvindre

Hi,
Please check and format your table data before sending it to bapi. I mean to say u might be missing conversions or validations for some fields.
I guess the data you are passing in first two lines meets thee bapi requirement without any conversions, whereas same is not the case with other lines od data.
I hope this will help you in resolving this issue and close it.
Appreciate if found helpful!!!
Regards,
Vinit

COGI error in relevance in production order goods movement

Hello,
Yesterday I have a COGI error with regards in reservation. "RE Quantity moved exceeded by 7,912 LB: 1000710 0111 0001 201200". But today someone done something on the production order, and the error yesterday in COGI are fixed. Am confused what happen or what they did to fixed this since yesterday the error still there but now it is gone.
when checking the Documented Goods Movement for material 1000710 in the production order here the details,
Goods MVt   Mat. Doc Mvt type Batch      Qty   Reservation
1                       4908430     261     201199    6000 1112345
1                       4908426     261     201198   14000 1112345
1                       4908437     262     201200   14000 1112345
2                       4908430     261     201200   14000
This is what it shows? could some one explain me with this data what was the reseason yesterday i did not fixed the COGI error while now it was fixed? and why in RESERVATION 1112345 it only shows qty 6000 not 14000 for this order?
Hope for your kind and urgent reply to this issue
Thanks
JJ
Edited by: John Jay Palisoc on Jul 24, 2008 5:02 AM

Hi JJ,
well, as far as I can see, there is an unplanned 261 (without reservation no.). This one (doc. 4908430) has wihtdrawn additional 14000 for batch 201200. Therefore, the later 262 posting (doc. 4908437) with 14000 for that batch could be put into store without error.
That's all
Regarding the reservation: It shows qty 6000 because as first step 14000 were withdrawn, then additional 6000 and then 14000 were put back. So 6000 remain.
Regards, Andreas
Edited by: Andreas Seibel on Jul 24, 2008 3:37 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:40 PM
Edited by: Andreas Seibel on Jul 24, 2008 3:45 PM

Error documented goods movements

Similar Messages

Maybe you are looking for