Error downloading video (corrupted file) need help

I began to download the new quicksilver snowboarding film "That's it That's All" and when i was about halfway through the download i got an error message pop up saying that the file was corrupted and to choose the "check for available downloads" under the "store" tab to fix it. but after doing this numerous times i still am not able to download the video fully and its stuck about halfway. does anyone know how to fix this?
(by the way, the error report code is 8008 if anyone cares.)

Hello
I repeat my offer.
Not only because I wish to try to help you but because I wish to be able to understand what is the source of the oddity.
I'm afraid because I found on these forums some messages about corrupted files.
As my brain is not so large than Apple's offices, I join together these reports and the description of some encountered oddities of iWork products used under Mac OS X 10.5.
At this time I don't know which is the wrongdoer but it's clear that the relations between the apps and the OS are not perfectly correct.
Yvan KOENIG (from FRANCE mardi 18 décembre 2007 16:12:38)

Similar Messages

HT6114 Hi everyone! When I tried to update my OS X to 10.9.2 (Combined) thru the App Center, once it restarts, an error says "the version downloaded is corrupted and needs to be updated." I did download and update three times already but the same error oc

Hi! Why is it that after I updated thru the app center my OS X 10.9 to 10.9.2 (Combined), after it downloaded and restarts, this error occurs, "the version downloaded is corrupted and needs to download again."? I have been repeating the process for more than three times already but the same problem keeps on happening. Please advise.

Try the manual update:

I did a manual restore but it gave me an error it was 3914 i need help fixing it.

i did a manual restore but it gave me an error it was 3914 i need help fixing it.

From this Apple support document: iTunes: Specific update-and-restore error messages and advanced troubleshooting
This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the headingBlocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
B-rock

I can't restore my ipod, error 3194 pops up, I need help

I can't restore my ipod, error 3194 pops up, I need help. Please

From http://support.apple.com/kb/TS3694#error3194:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. FollowiTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

Download video clip file from website, i.e., YouTube

Can someone advise how to download video clip file from website & play it back on computer.

YouTube video clips are flash videos. I use videobox, its shareware, with a free trial, it works for 5 days. Here's the link: http://www.tastyapps.com/ . Did this help?

PsCS6 won't open. Error Message 213:19. Need Help.

PsCS6 won't open. Error Message 213:19. Need Help.

HI jacksonthomas,
Were you able to use PS CS6?
If not, please try the solutions on the following page: http://helpx.adobe.com/photoshop-elements/kb/licensing-problem.html
Let us know if you need any further help.
-Pragya

I am using OS X 10.8.5 but I'm having a hard time downloading Mavericks. It keeps on showing that there is an error downloading. Can someone can help me?

I am using OS X 10.8.5 but I'm having a hard time downloading Mavericks.
It keeps on showing that there is an error downloading.
Can someone can help me?

Some have managed to resolve the problem by cancelling the download, logging out of their App Store account and then logging back in again and starting over. The same approach also sometimes works for a stalled download:
http://www.wired.com/gadgetlab/2013/10/mavericks-issues-and-fixes/#slideid-23477 1
Also, if you are connected via wifi, try connecting via ethernet cable if you are able to. It's a 5.3gb download and it seems the more reliable the connection is, the better.

The iphone iphone could not be restored an unknown error occurred(9) pleas i need help

the iphone iphone could not be restored an unknown error occurred(9) pleas i need help
i phone 5

Hi there vienna.hassan,
You may find the troubleshooting steps in the article below helpful.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
-Griff W.

I do not have Microsoft office and to know if I can still open docx files - error message reads corrupt files. Is there a reliable converter out there?

I do not have Microsoft office and want to know if I can still open docx files - error message reads corrupt files. Is there a reliable converter out there? I am a new mac user.

Install the free LibreOffice and save a bundle not having to pay MS. http://www.libreoffice.org/

Getting a Rendering Error "No Video in File" and now corrupted video file

I've been working with some video footage in Final Cut that I recorded directly to my hdd using adobe Onlocation. I used the chroma key filter on it and then added an animation clip from After Effects, in the form of a .mov file to my timeline. When trying to render my timeline I get the "no video in file error."
I used the render manager and trashed all the render files, then I manually searched my hdd and trashed any other render files I could find. Still getting the same error message. Gave up and decided to start from scratch except that now my original video file that I recorded with Onlocation is corrupted and I can't preview it in Quicktime nor play it in Onlocation. It also imports into final cut as a white screen.
This is the only copy of the file I have (I know, stupid me right?) so any help or suggestions would be greatly, GREATLY appreciated.

Thanks so much for your suggestions, the File Salvage option from digital rebellion worked!! Good as new!! made a backup and going to attempt to complete my project, but any ideas on why adding the AE clip to the timeline caused the corruption of the video file in the first place?

Everytime I download mountain Lion, it always stop at 156mb and says " an error has occurred". I need help?

I need help because Mountain lion downloads but when it gets to 156mb, itss calculating and then an error has occurred. What is the problem

Are you getting an error code?
Try resetting the App Store.
Reset Learned from Old Toad
If that doesn't work:
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store. Sign in and then reclick the Mountain Lion buy. It won’t charge you again.

More than 1 ms MOMO digital IO 7358 in LabView Real-Time 8.5, error downloading EPOS dll file into RT

Hi all,
I have several problems here, I tried to google but still I could not solve the problem.
Here are my questions:
1. I tried to download an example program of EPOS which require to download a DLL file into the RT, but it failed, here's the error (I attached the picture) 01/02/2008 13:29:50.511 [error] LabVIEW:
Failed to load shared library EposCmd.dll:_VCS_GetProtocolStackName@16:C on RT target device.
From the NI.com forum,
I found a similar problem and it said by installing Network Variable Engine and Variable Client Support into the LV-RT, and I did, but still failed. Any one can help me about this?
2. I posted a question also in lavag, I think this section is more appropriate. "I
am trying to use the digital IO of the motion controller of 7358, but then I realized the delay is more that 1 ms (I checked using the oscilloscope), I attached the code (MOMO = Must On Must Off). Is this real, I mean the hardware delay between on-off is as big as this? Anyone knows the solution for this?"
Note: I am using LV-RT 8.5, PXI-7358 Motion Controller, EPOS 70/10
Thank you for any help
Message Edited by bono02 on 01-02-2008 05:47 AM
Attachments:
maxon-rt3.JPG ‏120 KB
momo1.JPG ‏55 KB

Hello bono,
1. From what I have seen, this error is usually caused by one of two things. The first is the Shared Variable software components not being installed, which is covered in this Knowledgebase. The other is due to a corruption of the ni-rt.ini file on the Real-Time controller. You can follow the steps layed out in this Knowledgebase, which gives three possible remedies. You could also try reinstalling the software (firmware) or create a PXI Uninstall disk from Measurement & Automation Explorer by selecting Tools»Remote Systems»RT PXI Disk Utilities»Create PXI Uninstall Disk. Boot the PXI Controller from the PXI Uninstall Disk, which will erase the ni-rt.ini and ph_exec.exe on the target. However, you will need to reconfigure the controller after doing this.
2. Due to the nature of the digital I/O on motion controllers, it is not surprising that you are seeing around a 1ms delay. It deals with the fact that it must update the motion controller with the new value on each control loop. This Knowledgebase gives a little more clarification regarding the 7350 specs.
Carlton
CLD

I bought a hp d3000 and can'nt get it to download to premiere elements,need help!

I bought a hp d3000 and can'nt download to preiere elements 11. need help!

rik46
As for the video specifications for your HP D3000. From what I read, you are either shooting 1280 x 720 at 30 frames per second or 640 x 480 at 30 frames per second. And, your video is MotionJPEG.avi. Can you confirm that?
http://www.futureshop.ca/en-CA/product/hewlett-packard-hp-16-1mp-21x-optical-zoom-digital- camera-d3000-black-hpd3000/10239990.aspx
If you are shooting 1280 x 720 at 30 frames per second, I would suggest the following, whichever works:
a. transfer the video from the camera to a computer hard drive save location.
b. Open Premiere Elements 11, go to File Menu/New/Project and in the new project dialog set the project preset YOURSELF to NTSC HDV HDV 720p30, making sure that you place a check mark next to "Force selected Project Setting for this project". Then via ADD MEDIA, Files and Folders, browse to an bring your MotionJPEG.avi into the project (Project Assets).
or
a. if doable, attach at USB cable from your camera's USB 2.0 port (it has one according to what I read online) to the computer USB 2.0 or 3.0 port
b. then open a Premiere Elements 11 new project - File Menu/New/Project and in the new project dialog set the project preset YOURSELF to NTSC HDV HDV 720p30, making sure that you place a check mark next to "Force selected Project Setting for this project". Then via ADD MEDIA, "Vidoes from Flip or Camera"/Video Importer and its Advanced Dialog bring your video into the project.
In these cases the project preset will match your source media (no black borders in the monitor space when you edit). If the program has a problem selecting the project preset, as it wants to do, you will probably end up with the default 1080i30 instead of 720p30 unless you step in and do this project preset setting yourself.
Please review and let us know the outcome.
Thanks.
ATR

Error downloading videos purchased on iTunes store

I recently upgraded to the 30GB iPod w/ video. I purchased a couple of videos from the iTunes store and when I attempt to download I get an error message: "There was an error downloading you purchased music. The disk could not be read from or written to." I even went as far as removing my old software and reloading the new disk. Can someone help me out? My laptop is pretty full but I've still got 9GB free.

No, but thanks for the help. I checked and it is not read only. It is a corporate laptop. Could it have to do with the security selections?

Connect to mysql DB (An unidentified error has occurred.) plz need help...

I have been unable to create a database connection in dreamweaver to my MySql
server. Each time I receive the message "an unidentified error has occurred".
I can use pure php code to create a connection successfully:
<?php
$username = "root";
$password = "password";
$hostname = "localhost";
$dbh = mysql_connect($hostname, $username, $password)
or die("Unable to connect to mysql");
print "connected to mysql<br>";
$selected = mysql_select_db("test",$dbh)
or die("Could not select first_test");
if (mysql_query("insert into test_table values('5')")) {
print "successfully inserted record";
else {
print "Failed to insert record";
mysql_close($dbh);
?>
This works, I can successfully insert a record. However, if I try and create
a connection in Dreamweaver with these same variables, I receive the message
"an unidentified error has occurred". I have tried, deleting the _mm
connection scripts folder and recreating them. I have used the mx2004 updater,
I have tried all document types... nothing seems to work...
i am using local server (phptraid)
PHPTriad 2.2 contains the following changes:
Updated packages for Apache(1.3.23), MySQL(3.23.48) and PHP(4.1.1).
also using remote host at (www.0fees.net)
last thing i would to say in my computer i success only one time to make connection in window 7 - dreamweaver cs4
and i create this site mwlobby.0fees.net
but now i downloaded dreamweaver cs5 and i need to install new windows
so i need help
any suggestions?

Turn your iPhone to a DFU mode and restore it

Error downloading video (corrupted file) need help

Similar Messages

Maybe you are looking for