Error during automatic settlement rule creation

Hi Gurus,
For the investment project, I maintained as follows, first level WBSE - Only planning element - no settlement. 2nd level WBSE - settled to AuCs. For level three & below settled to Superior WBSE. I had created the Settlement type with '5'. When I am executing CJB2 to create the Settlement rules automatically, I am getting the following error message for level 3 & below WBSE.
Enter a valid value for the settlement type :
Message no. KD199
Diagnosis
The system found a settlement type settlement type in the settlement rule which either does not exist or is unsuitable for the sender.
Procedure
If possible, enter a suitable settlement rule.  Remember that the rules for preliminary settlement ("PRE") of capital investment measures are different from those for period settlement ("PER") of other settlement senders.  Periodic settlement only makes sense for capital investment measures.  They must not have any "PER" rules.
To enter an investment profile (in the control data for an order or WBS element) or to remove it.  However, first delete the PER or PRE rules (in the settlement rule) and er zu in internal orders, you can first change the investment profile and then adapt the rules before you save.
Error(s) during creation of settlement rule :
Message no. ORB509
Diagnosis
Errors occurred during the check on settlement receivers.
System Response
Processing stopped.
Procedure
Check whether the:
Specific receiver Account assignment e actually exists
Settlement profile Z7 permits account assignment to the specified receiver
can anyone help me where I am making mistake or what is the procedure to be adopted for such scenario.
somebody else also had discussed the same issue in this forum but there is no answer for this.
thanks in advance
Vinodh

hi Sreenivas,
Thanks for your reply,
I tried this, system is giving the following error now
Could not find a superior WBS element for WBS element
Message no. CJ115
Diagnosis
The system could not find a superior element for a WBS element while it was executing the function 'Derive structure'
System Response
Processing stopped.
What  could be the reason ?
thanks in advance,
Vinodh

Similar Messages

  • Automatic settlement rule creation

    Hello Guru's,
    I have a scenario of capital proejcts. Were I create Assets with the help of Investment profile at the top(1st level) WBS element. Now my requirment is the cost of the second level WBS should be rolled upto top level WBS element. To do this I have to manually create settlement rule for all second level WBS to settle at top level. I have to create this rule automatically throught CBJ2 tcode.
    As per SAP Note 211324 I have  Implemented the modification. Now I have Insert value '5' with short text 'Superior WBS element'. Also have assign the strategy to Acct. Assign element. This strategy is also assigned to settlement profile. Also have assigned this settleemnt profile to project profile.
    Now, when i run CJB2 tcode for my project the system issues me an error :-
    Error(s) during creation of settlement rule
    Message no. ORB509
    Diagnosis
    Errors occurred during the check on settlement receivers.
    System Response
    Processing stopped.
    Procedure
    Check whether the:
    Specific receiver Account assignment e actually exists
    Settlement profile ZPI03 permits account assignment to the specified receiver
    Please throw some light on this error
    Regards,
    Tushar

    Thanks Virendra,
    Thanks for your reply but tell me after the implementation of note do I need to implement BADI also as in past for some forums you have mentioned???
    Regards,
    Tushar

  • Iw31 auto settlement rule creation

    Hi
    We have to create sett rules for Maint orders automatically based on additional data tab either wbs or cc.
    The rules are created fine if the order is assigned to an object (ie Functional location with wbs or cc) with the maint order.  But if the maint order is not assigned to a FL without a wbs or cc, the automatic settl. rule creation with default is not created. 
    I would like not to assign a wbs or cc to the FL since the maint orders will be generated from one FL but could be settled to sevral wbs/cc.

    Hi ,
    The requirement cannot be met through standard behaviour of the system , for your requirement you will have to go for the below mentioned user Exit .
    Go to SMOD and give the name of the enhancement as IWO10027
    In the components you will find the fucntion module - EXIT_SAPLCOI1_027 , which will serve the prupose that you are looking for .
    Regards ,
    Dewang .

  • Automatic Settlement rules generation

    PS Experts
    I need to have automatic settlement rule generation for WBS elements.
    I do have all the config (PS & IM) in place and when i release my WBS element then AUC is automatically created and no settlement rules are generated at this point.
    But when i create FINAL ASSET, then the settlement rules are generated automatically with final asset as the receiver. When i run my final settlement (CJ88) then the settlement rule is updated with AUC & Final asset.
    My question is do i need to have Investment profile to have automatic creation of settlement rules.
    What if i don't want to activate IM and still have automatic settlement rule generation?
    Edited by: Raj M on Apr 17, 2008 8:49 PM

    Hi,
    For automtic settlement rule generation folloowing steps need to be followed.
    1. Determine Strategy for Settlement Rule
    In this there will be settings for settlement rule where we define the recevier cost object after project settlement.
    This strategy will be assigned to project profile
    2. Generate Settlement
    CJB2 transaction need to be run for generation settlement for the WBSE.
    Hope this will help you.
    Regards,
    Rakesh Pradhan

  • Auto Settlement rule creation problem at the time of PM order release

    In SPRO, for order type GEN, already customization available as "Madatory for Release" for order type. But still automatically settlement rule is not being created in IW31/IW32 at the time of release.
    If I go to Settlement rule in GO TO option-Settlement Rule in IW32, then system is asking me two options as as With default and Without default. With default settlement, settlemement rules are coming.
    But my query is, even if it is mandatory for release, why system is releasing without creating distribution rule in IW31?
    Pl. let me know if any config missing.
    Vijay

    Hi,
       Please read note 195607 and see if it helps
    regards
    Waman

  • Automatic settlement rules for AUC

    Hi.
    I want to create the automatic settlement rules for AUC settlement instead of entering the setllement rules manually.
    can anyone provide me the configuration steps required for automatic settlement rules.
    Regards,
    Padmavathi

    Hi ,
    Path: Spro - controlling - Internal orders - Actual postings - Settlement - Automatic generation of settlement rules
    Can anyone please provide me the details how to configure in this path and in which scenario is it useful.
    Regards,
    Padmavathi

  • PS - Automatic Settlement Rule Generation

    I am currently setting up the automatic settlement rule generation in Project Systems and running some tests to make sure it works properly.  I am running into an issue involving the newly generated settlement rule overwriting an existing settlement rule that was entered manually.
    To generate the settlement rules, I run transaction code, CJB1 for multiple projects.  I am doing it in a batch process, run for a range of projects from 1 - 1000.. 
    Is there a way to distinguish the projects with settlement rules so that a rule isn't generated?
    Any thoughts are greatly appreciated.
    Thanks!

    Hi,
    I think you can look for following things-
    1. In the selection varaint itself you can mention the project numbers, which you want to have the setllement rules to be generated for. This can be done only if you know the projects which need not to be included in the list of selection.
    2. Or else when the settlement rule is already created for the WBS it has the system status as "SETC". You can use this in the selection profile.
    Thanks

  • Automate settlement rule

    How to  configure the settlement rules to be automatically created when a new project is saved such as for the AUC settlement or Requesting Cost Center?

    Automatic settlement rule work for the projects where object class is other than INVESTMENT.
    You have to configure  in SPRO IMG->>>PS->>>Costs->>>Automatic and Periodic Allocations->>> Settlement->>> Settlement Rule for WBSE ->>> Determine Strategy for Settlement Rule.
    Here you can mention your default settlement receiver as requesting cost center / responsible cost center or you can enter a settlement rule for level 1 WBS element and then copy this to all lower levels.
    Assign this to Project profile in OPSA transaction under the controlling area tab Settmt rule strat. field.
    Then you have to execute the transaction CJB1 / CJB2 for generating the settlement rule automatically to all the WBS elements.
    You can search the forum, <link removed>
    you can also refer to the online help. <link removed>
    Incase of INVESTMENT object class projects, the settlement rule is automatically created by the system when you execute the settlement for project first time, the receiver will be the respective AUC.
    Praveen
    Edited by: b praveen savan on Sep 14, 2010 6:27 PM
    Edited by: Virendra Pal on Sep 15, 2010 4:56 PM
    This time I am not deleting the post and do not bank on second chances.

  • Error during automatic PR to PO creation

    Hi,
    We are getting the following error while automatically converting PR to PO thorugh ME59N:
    "Internal system error during blocking"
    Message Class - 06  and Message Number - 002.
    Can anyone suggest that what exactly is this error and how to rectify this.
    We have checked all the Lokced entry list in the system, but none of the tables/objects related to MM are locked.
    FYI, on the selection screen of ME59N we are just specifying the plant and vendor number, as all PR for this vendor need to be converted in PO in one-go.
    Regards,
    Ankit

    Dear,
    Kindly check if Material , vendor is locked bu any user ...You can restart the server and then try...
    Or ask basis guy to check if any Lock entries are there...
    Also if still you are facing this error then make this Error message as Warning messsage and then try...
    Regards
    Utsav

  • Error while creating settlement rule

    We are trying to create a Settlement Rule for a Production Order for material 900010001 with following details:
    Cat:MAT
    Settlement Receiver:900010001
    % :100
    Settlement Type:FUL
    System is giving an error msg. no.KD063 'Distribution rule for an Article can only be created automatically'.
    Can anyone help us in analysing the same.
    We want that while creating a Production Order Settlement Rule shall be created by default for Cat:MAT & Settlement Receiver:900010001 (Material of Production Order).Can anyone guide us how the same can be achieved.
    With Rgds.,
    Rakesh Kumar

    Hi..
    please try this....Goto KSR2_VBP.
    THere are two strategies.. 01 and 02.
    01 for manual creation of settlement rules
    02 for auto creation..
    first check whether 01 and 02 are in your plant.
    Sales and distrib....basic functions......auto gen. of settlement rules.......
    here you ll find two activities.
    (1)maintaining the settlement strategies and
    (2)activating one among them.
    If you activate 02, your problem will be solved..
    Also check this..
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/a9/ab777d414111d182b10000e829fbfe/frameset.htm
    The settlement profile is to be defined for thee particular Order Type to generate automatically.
    Define Production Order Type in OPJH
    Under Cost controlling check the settlement profile .
    If not create the same in OPJH.
    Settlement Profile: Create settlement profile - SPRO > Controlling > Product Cost Controlling > Product cost by Order > Period End Closing > Settlement > Create Settlement Profile
    Enter Settlement profile from OPJH or Choose one for production order
    and configure Settlement profile. Indicators
    with wishes
    karthick.

  • Automatic settlement rule for receiver 'Fixed asset' (with out IM)

    Hi Experts
    I am working with project settlement to a fixed asset.
    I have defined a selttlement profile in which, FXA is the only valid receiver.
    Please note that we do not use Investment managent and hence no automatic AUC.The predefined asset to be used for settlement.
    In this situation i am unable to generate settlement rule automatically as like the case with CTR.
    The below message is experienced.
    "Enter a distribution rule for Asset without a validity limit"
    However i have manually maintained the settlement rule with specification of appropriate asset as receiver and settled.
    In this scenario, how to ensure that the settlement rule is automatically generated, any where can we refer the fixed asset?
    warm regards
    ramSiva

    Hi,
    Settlement rule cannot be automatically maintsined, you have to maintain manually, for example if you want to settle to fixed asset, how the system know to which fixed asset it should settle. You have to maintain settlement parameter manually.
    Regards,
    Sreekanth

  • Automatic Settlement rule derivation in IP50

    Hi All,
    In IP50, Service Plan has been created with reference to Contract. How can the settlement profile be derived automatically?
    I have used order type SM01. For that order type, default settlement receiver is Sales document item.
    I have not released the order, just created.
    Note: If I follow the path of creating notification for contract & order based on notification, I could able to get settlement profile automatically with that contract as receiver.
    I have not configured anything. I have tried in IDES with standard configuration.

    Alan,
    You can use IWO10027 to automatically determine your settlement rules.
    If you go to transaction SMOD and display the Documentation, then there is some sample code at the bottom of the text.
    PeteA

  • Object Currency is Required in settlement rule creation in CJIC

    Hi,
      I am trying to create settlement rule to settle the cost of wbse to Final Asset in CJIC.I want to settle by amount in Object currency.There is no field where I can change it to Object currency,it is in Controlling Area Currency.
    Any help on this will be appreciated,
    Regards,
    B P Singh

    Hi,
    Go to CJ20N, and go the WBS element. Now go to the settlement rule and give the final asset there. Now in CJ88, after settlemet run, the currency will be taken accordingly
    Regards,
    Uddhab

  • System Center 2012 Error on Automatic Deployment Rule

    Good day,
    I have created and Automatic Deployment Rule to deploy my EndPoint Protection updates. So far, I have been able to deploy the agents, and the Antivirus to all my network computers. The problem I have is when the update rule runs. I have checked the SMSProv.log
    file, and this I what I get:
    Execute SQL =select  all SMS_AutoDeployment.AutoDeploymentEnabled,SMS_AutoDeployment.AutoDeploymentID,SMS_AutoDeployment.SecurityKey,SMS_AutoDeployment.Description,SMS_AutoDeployment.LastErrorCode,SMS_AutoDeployment.LastErrorTime,SMS_AutoDeployment.LastRunTime,SMS_AutoDeployment.LocaleID,SMS_AutoDeployment.Name,SMS_AutoDeployment.Schedule
    from vSMS_AutoDeployments AS SMS_AutoDeployment  where SMS_AutoDeployment.AutoDeploymentID = 1
    I am running System Center 2012 R2 on Windows Server 2012 R2. With this, I run SQL Server 2012 Sp1.
    Thanks
    Chris

    Hi,
    UpdatesHandler.log on the client records about the download and installation of software updates on the client.
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error during automatic po creation ME59N

    Dear All,
    Following errors has been shown after automatic po creation by ME59N:-
    Message text Message Class Message Number
    PO could not be created
    PO header data still faulty MEPO 2
    Enter Validity End ME 83
    Enter Latest GR Date ME 83
    Can delivery date be met? ME 40
    Requisition could not be converted
    Please suggest how to solve above .
    with regards,
    Pradeep Bhardwaj

    Hi
    From the messages it seems that system is expecting a Validity end date at PO header & Latest GR date at item level.
    Do you have these two fields as required in the PO??
    If these are required fields then you need to have process to populate them automatically (Programatically) to resolve the error.
    Thanx
    Prasad

Maybe you are looking for

  • Ultra high memory usage when deleting a slide show

    Hallo, I have a DVD project with several menus and slideshows and a huge flowchart. I wanted to delete one of the slide shows. What happened then was that the memory usage rised up to over 2 GB. Not the usage of the exe shown in the windows task mana

  • Why do I appear to have 2 different Qwerty keyboards?

    How do I change a key board's contents to have an undrescore? I need an underscore as part of my address and depending on which programme I am in one doesn't have an underscore.  How do I change that?

  • How to show an image in JSP given the bytes[] of the photo?

    Hi all, I stored a user's picture in the db as text. For this I simply converted the JPG to bytes[] and from bytes to string: Base64.encode(bytes) Now I wish to do the reverse - to 'output' the image on the screen. So given the bytes[] of the image w

  • TOC link with a subscript character does not work in PDF

    Hi, has anyone come across with this? A heading has a subscript character and when you generate a PDF, the TOC page has no link. Other TOC heading links work out just fine, but all these that have subscript, these do not. I have used Save As PDF and

  • Updated AgentID not displaying correctly on CTIOS SD

    Hi, We've changed an AgentID of one agent. CTIOS Agent Desktop's agentID has been updated but on CTIOS Supervisor Desktop, agentID of that agent is still showing the old agentID. Anyone knows how to refresh the agentID on the CTIOS Supervisor Desktop