Automatic Settlement rules generation

PS Experts
I need to have automatic settlement rule generation for WBS elements.
I do have all the config (PS & IM) in place and when i release my WBS element then AUC is automatically created and no settlement rules are generated at this point.
But when i create FINAL ASSET, then the settlement rules are generated automatically with final asset as the receiver. When i run my final settlement (CJ88) then the settlement rule is updated with AUC & Final asset.
My question is do i need to have Investment profile to have automatic creation of settlement rules.
What if i don't want to activate IM and still have automatic settlement rule generation?
Edited by: Raj M on Apr 17, 2008 8:49 PM

Hi,
For automtic settlement rule generation folloowing steps need to be followed.
1. Determine Strategy for Settlement Rule
In this there will be settings for settlement rule where we define the recevier cost object after project settlement.
This strategy will be assigned to project profile
2. Generate Settlement
CJB2 transaction need to be run for generation settlement for the WBSE.
Hope this will help you.
Regards,
Rakesh Pradhan

Similar Messages

PS - Automatic Settlement Rule Generation

I am currently setting up the automatic settlement rule generation in Project Systems and running some tests to make sure it works properly. I am running into an issue involving the newly generated settlement rule overwriting an existing settlement rule that was entered manually.
To generate the settlement rules, I run transaction code, CJB1 for multiple projects. I am doing it in a batch process, run for a range of projects from 1 - 1000..
Is there a way to distinguish the projects with settlement rules so that a rule isn't generated?
Any thoughts are greatly appreciated.
Thanks!

Hi,
I think you can look for following things-
1. In the selection varaint itself you can mention the project numbers, which you want to have the setllement rules to be generated for. This can be done only if you know the projects which need not to be included in the list of selection.
2. Or else when the settlement rule is already created for the WBS it has the system status as "SETC". You can use this in the selection profile.
Thanks

Automatic settlement rules for AUC

Hi.
I want to create the automatic settlement rules for AUC settlement instead of entering the setllement rules manually.
can anyone provide me the configuration steps required for automatic settlement rules.
Regards,
Padmavathi

Hi ,
Path: Spro - controlling - Internal orders - Actual postings - Settlement - Automatic generation of settlement rules
Can anyone please provide me the details how to configure in this path and in which scenario is it useful.
Regards,
Padmavathi

Automate settlement rule

How to configure the settlement rules to be automatically created when a new project is saved such as for the AUC settlement or Requesting Cost Center?

Automatic settlement rule work for the projects where object class is other than INVESTMENT.
You have to configure in SPRO IMG->>>PS->>>Costs->>>Automatic and Periodic Allocations->>> Settlement->>> Settlement Rule for WBSE ->>> Determine Strategy for Settlement Rule.
Here you can mention your default settlement receiver as requesting cost center / responsible cost center or you can enter a settlement rule for level 1 WBS element and then copy this to all lower levels.
Assign this to Project profile in OPSA transaction under the controlling area tab Settmt rule strat. field.
Then you have to execute the transaction CJB1 / CJB2 for generating the settlement rule automatically to all the WBS elements.
You can search the forum, <link removed>
you can also refer to the online help. <link removed>
Incase of INVESTMENT object class projects, the settlement rule is automatically created by the system when you execute the settlement for project first time, the receiver will be the respective AUC.
Praveen
Edited by: b praveen savan on Sep 14, 2010 6:27 PM
Edited by: Virendra Pal on Sep 15, 2010 4:56 PM
This time I am not deleting the post and do not bank on second chances.

Settlement rule generation

Hi all.
I am using line item settlement. using investment projects.
Unable to generate the settelemnt rule for the lower level WBS elements. while settling from WBS to AUC
1. Created project (throught AR) with one one level WBS element (top level), planned cost, released budget, posted actual. now while doing settlemnt, i am able to generate settlemnt rule for top level WBS element automatically and settlemnt is done.
2. Created project (throught AR) with TWO level WBS elements (top level and 2nd level), planned cost, released budget, posted actual and while doing settlemnt, i am unable to settle, as system is asking me to maintain settlemnt rule for the 2nd level.
is there a way to generate settlemenmt rule for 2nd level automatically, as i have mainitained settelemnt strategy 40, to take the settlement rule from superior WBS.
i have checked it with CJB2 also, and it giving an error ORB501.
regards
Edited by: Surya Pampana on Oct 12, 2010 12:25 PM

Thanks for all the inputs.
Ahmed, i have implement the note 211323 and its relevent notes, still not working.
Ok, if i have to maintain settelemnt rules manully, how to maintain at level 2.
FYI: both level 1 and level 2 are account assigned
Now i have to maintain the settelment rule for 2nd level as : from level 2 to level 1?
pls suggest
Regards
Surya

Automatic settlement rule for receiver 'Fixed asset' (with out IM)

Hi Experts
I am working with project settlement to a fixed asset.
I have defined a selttlement profile in which, FXA is the only valid receiver.
Please note that we do not use Investment managent and hence no automatic AUC.The predefined asset to be used for settlement.
In this situation i am unable to generate settlement rule automatically as like the case with CTR.
The below message is experienced.
"Enter a distribution rule for Asset without a validity limit"
However i have manually maintained the settlement rule with specification of appropriate asset as receiver and settled.
In this scenario, how to ensure that the settlement rule is automatically generated, any where can we refer the fixed asset?
warm regards
ramSiva

Hi,
Settlement rule cannot be automatically maintsined, you have to maintain manually, for example if you want to settle to fixed asset, how the system know to which fixed asset it should settle. You have to maintain settlement parameter manually.
Regards,
Sreekanth

Automatic settlement rule creation

Hello Guru's,
I have a scenario of capital proejcts. Were I create Assets with the help of Investment profile at the top(1st level) WBS element. Now my requirment is the cost of the second level WBS should be rolled upto top level WBS element. To do this I have to manually create settlement rule for all second level WBS to settle at top level. I have to create this rule automatically throught CBJ2 tcode.
As per SAP Note 211324 I have Implemented the modification. Now I have Insert value '5' with short text 'Superior WBS element'. Also have assign the strategy to Acct. Assign element. This strategy is also assigned to settlement profile. Also have assigned this settleemnt profile to project profile.
Now, when i run CJB2 tcode for my project the system issues me an error :-
Error(s) during creation of settlement rule
Message no. ORB509
Diagnosis
Errors occurred during the check on settlement receivers.
System Response
Processing stopped.
Procedure
Check whether the:
Specific receiver Account assignment e actually exists
Settlement profile ZPI03 permits account assignment to the specified receiver
Please throw some light on this error
Regards,
Tushar

Thanks Virendra,
Thanks for your reply but tell me after the implementation of note do I need to implement BADI also as in past for some forums you have mentioned???
Regards,
Tushar

Error during automatic settlement rule creation

Hi Gurus,
For the investment project, I maintained as follows, first level WBSE - Only planning element - no settlement. 2nd level WBSE - settled to AuCs. For level three & below settled to Superior WBSE. I had created the Settlement type with '5'. When I am executing CJB2 to create the Settlement rules automatically, I am getting the following error message for level 3 & below WBSE.
Enter a valid value for the settlement type :
Message no. KD199
Diagnosis
The system found a settlement type settlement type in the settlement rule which either does not exist or is unsuitable for the sender.
Procedure
If possible, enter a suitable settlement rule. Remember that the rules for preliminary settlement ("PRE") of capital investment measures are different from those for period settlement ("PER") of other settlement senders. Periodic settlement only makes sense for capital investment measures. They must not have any "PER" rules.
To enter an investment profile (in the control data for an order or WBS element) or to remove it. However, first delete the PER or PRE rules (in the settlement rule) and er zu in internal orders, you can first change the investment profile and then adapt the rules before you save.
Error(s) during creation of settlement rule :
Message no. ORB509
Diagnosis
Errors occurred during the check on settlement receivers.
System Response
Processing stopped.
Procedure
Check whether the:
Specific receiver Account assignment e actually exists
Settlement profile Z7 permits account assignment to the specified receiver
can anyone help me where I am making mistake or what is the procedure to be adopted for such scenario.
somebody else also had discussed the same issue in this forum but there is no answer for this.
thanks in advance
Vinodh

hi Sreenivas,
Thanks for your reply,
I tried this, system is giving the following error now
Could not find a superior WBS element for WBS element
Message no. CJ115
Diagnosis
The system could not find a superior element for a WBS element while it was executing the function 'Derive structure'
System Response
Processing stopped.
What could be the reason ?
thanks in advance,
Vinodh

Automatic Settlement rule derivation in IP50

Hi All,
In IP50, Service Plan has been created with reference to Contract. How can the settlement profile be derived automatically?
I have used order type SM01. For that order type, default settlement receiver is Sales document item.
I have not released the order, just created.
Note: If I follow the path of creating notification for contract & order based on notification, I could able to get settlement profile automatically with that contract as receiver.
I have not configured anything. I have tried in IDES with standard configuration.

Alan,
You can use IWO10027 to automatically determine your settlement rules.
If you go to transaction SMOD and display the Documentation, then there is some sample code at the bottom of the text.
PeteA

Automatic Generation of Settlement Rules for PM order

Hi All,
I am doing a maintenance orders settlement and I have the fallowing issue:
My client has 2 types of equipment, namely vehicles and industrial equipment. Both have particular rules.
For vehicles, we need to control all cost by an internal order
Industrial equipment costs will be control by cost center.
So, cost center is maintained for industrial equipment, and Settlement Order for vehicle equipment.
I have a unique order type for which in Settlement profile I have entered Order and Cost Center as 'Settlement Optional' and default object type as CTR.
When I create a PM order for vehicle, system cannot generate automatically the settlement rule, because in order type I have entered default object type as CTR and in equipment I just have the Settlement Order.
But if I create a PM order for industrial equipment system create automatically the settlement rule, because cost center is maintained for industrial equipment and order type has default object type as CTR.
In the allocation structure I have a receiver category for CTR and ORD.
So, Could you help me how to generate automatically settlement rule for both cases without 2 order types?
Thanks & regards,
Hélder Nunes

hi
i think it is not possible to generate settlement rule based on equipment ,if you have specified the default settlement category in IMG ,it will be generated .
check with your technical team whether user exit IWO10027 can be mapped
regards
thyagarajan

Auto generation of settlement rule for PM orders that are Investment Measur

Hi all
Has anyone successfully automatically generated settlement rules on a PM order that is an Investment measure? The settlement receiver would be an asset. User exit IWO10027 doesn't work. Std settings don't work either because a settlement rule is auto generated for the AUC on the order during settlement (Note 195607) because of IM.
Any ideas?
Thanks
CC

for a PM order as investm,ent measure the system assumes that you wish to create an AuC hence no other settlement rule generation is allowed
you can try by removing the asset class in the IM profile

Automatic creation of settlement rule while creating sales order

Hi Friends,
Can any one help me how to create settlement rule automatically while creating sales order i.e saving sales order. Is there any function module or any badi which can be used.. please suggest.
thanks
bobby

Hi,
Here is the solution , First Create a sustitution by going into OPSN Transaction , only user exit say 'U902'
and write the form routine in Program named 'ZRGGBS000'
The code is below ,
*&      Form U902
   Automatic Generation of Settlement Rule For WBS and Company 4180
FORM u902.
Exit For Automatic Settlement Rule Creation for WBS Billing elements
IF sy-tcode = 'CJ20N' or sy-tcode = 'CJ01' or sy-tcode = 'CJ02'.
    DATA   lv_proj TYPE ps_pspid.
    lv_proj = proj-pspid.
    EXPORT lv_proj TO MEMORY ID 'PSPID'.
Calling YGPS_CJB1EXEC Program For Creating Settlement Rule
    SUBMIT ygps_cjb1exec AND RETURN.
ENDIF.
ENDFORM.                                                    "u902
*& Program YGPS_CJB1EXEC
PROGRAM ygps_cjb1exec.
   Automatic Generation of Settlement Rule For WBS and Company 4180
Called From Exit For Automatic Settlement Rule Creation for WBS Billing elements
DATA: bdcdata_wa TYPE bdcdata,
      bdcdata_tab TYPE TABLE OF bdcdata,
      itab TYPE TABLE OF bdcmsgcoll.
DATA :lv_currm LIKE bkpf-monat,
      lv_curry LIKE bkpf-gjahr,
      lv_prevm LIKE bkpf-monat,
      lv_prevy LIKE bkpf-gjahr,
      lv_proj TYPE ps_pspid,
      lv_mode TYPE c,
      lv_time TYPE sy-uzeit.
DATA :g_datfm            LIKE usr01-datfm,
      g_dd(2)            TYPE c,                         " Day
      g_mm(2)            TYPE c,                         " Month
      g_yyyy(4)          TYPE c,                         " Year
      g_sydatum(10)      TYPE c.
IMPORT lv_proj FROM MEMORY ID 'PSPID'.
lv_mode = 'N'.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'PRZB-VARIANT'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'PRZB-VARIANT'.
bdcdata_wa-fval = 'ZGPS0001'.
APPEND bdcdata_wa TO bdcdata_tab.
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    bukrs = '4180'
IMPORTING
    currm = lv_currm
    curry = lv_curry
    prevm = lv_prevm
    prevy = lv_prevy.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-FROM'.
bdcdata_wa-fval = lv_currm.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-GJAHR'.
bdcdata_wa-fval = lv_curry.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VARC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'RKPSEL00'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_CURSOR'.
bdcdata_wa-fval = 'CN_PROJN-LOW'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PROJN-LOW'.
bdcdata_wa-fval = lv_proj.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_PSPNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_NETNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_ACTVT-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'CN_MATNR-LOW'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '/00'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=SAVE'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=VBAC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLSPO1'.
bdcdata_wa-dynpro   = '0100'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=YES'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKAZB'.
bdcdata_wa-dynpro   = '1000'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-BATCH'.
bdcdata_wa-fval = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'RKAUF-TEST'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=RUN'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-program = 'SAPLKABA'.
bdcdata_wa-dynpro   = '0210'.
bdcdata_wa-dynbegin = 'X'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-JNAME'.
bdcdata_wa-fval = 'CJB1_EXEC'.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_SUBSCR'.
bdcdata_wa-fval = 'SAPLKABA'.
APPEND bdcdata_wa TO bdcdata_tab.
Extract the date format from the user settings
PERFORM f_get_dateformat CHANGING g_datfm.
Changing the current date format to User Profile Date Settings
PERFORM f_format_date USING   g_datfm
                              sy-datum+4(2)
                              sy-datum+6(2)
                              sy-datum+0(4)
                     CHANGING g_sydatum.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STDAY'.
bdcdata_wa-fval = g_sydatum.
APPEND bdcdata_wa TO bdcdata_tab.
lv_time = sy-uzeit + 30.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-STTME'.
bdcdata_wa-fval = lv_time.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'KABA01-PRIKZ'.
bdcdata_wa-fval = space.
APPEND bdcdata_wa TO bdcdata_tab.
CLEAR bdcdata_wa.
bdcdata_wa-fnam = 'BDC_OKCODE'.
bdcdata_wa-fval = '=TAKE'.
APPEND bdcdata_wa TO bdcdata_tab.
Calling Transaction 'CJB1' for creating settlement rule
CALL TRANSACTION 'CJB1' USING bdcdata_tab MODE lv_mode .
IF sy-subrc = 0.
ENDIF.
*&      Form F_GET_DATEFORMAT
      This subroutine returns the date format in the user setttigs
     <--P_G_DATFM Date Format
FORM f_get_dateformat CHANGING p_g_datfm.                   "#EC *
SELECT SINGLE datfm FROM usr01 INTO p_g_datfm
WHERE bname = sy-uname.
ENDFORM.                    " F_GET_DATEFORMAT
*&      Form F_FORMAT_DATE
      This subroutine returns the date as per the user settings
     -->P_G_DATFM Date Format
     -->P_G_MM Month
     -->P_G_DD Day
     -->P_G_YYYY Year
     <--P_G_DATE Date
FORM f_format_date USING    p_g_datfm
                            p_g_mm
                            p_g_dd
                            p_g_yyyy
                   CHANGING p_g_date.                       "#EC *
CONSTANTS: c_dot VALUE '.',
             c_slash VALUE '/',
             c_dash VALUE '-',
             c_1 VALUE '1',
             c_2 VALUE '2',
             c_3 VALUE '3',
             c_4 VALUE '4',
             c_5 VALUE '5',
             c_6 VALUE '6'.
DATA: l_day(2),
        l_month(2).
l_day = p_g_dd.
l_month = p_g_mm.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = l_month
    IMPORTING
      output = l_month.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
      input = l_day
    IMPORTING
      output = l_day.
CASE p_g_datfm.
    WHEN c_1.
      CONCATENATE l_day l_month p_g_yyyy INTO p_g_date
          SEPARATED BY c_dot.
    WHEN c_2.
      CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
       SEPARATED BY c_slash.
    WHEN c_3.
      CONCATENATE l_month l_day p_g_yyyy INTO p_g_date
          SEPARATED BY c_dash.
    WHEN c_4.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_dot.
    WHEN c_5.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_slash.
    WHEN c_6.
      CONCATENATE p_g_yyyy l_month l_day INTO p_g_date
          SEPARATED BY c_dash.
ENDCASE.
ENDFORM.                    " F_FORMAT_DATE
thanks
bobby

Automatic Creation of Settlement Rule for Maintenance Order

Hi,
While doing TECO for Maintenance Order, its asking for Settlement Rule. IF I click settlement rule, message is coming as Maintain Settlement Profile with options like With Default, Without Default & Cancel.
I have maintained the Cost center in Equipment Master. Also I maintained Cost Center as Default Settlement receiver.
Also I have gone through setting in Automatic Creation of Settlement Rule under Controlling Category.
But I couldnt understand that. Can you please tell what are the steps to be done?
Regards,
Maheswaran.

Hi,
Please check the indicatorsin Actual cost/cost sales and Valid recevivers in settlement profile.
If for cost center : 1 settlement optional is maintained in valid recevivers and also for order
and in actual cost/ cost sales: indicator to be settled in full is selected.
Also check Allocation structure too if you have assigned the valid allocation structure.
**check if you have assigned the valid settlement profile to order types.
*****Most important after doing all these settings you need to create new order. for same order you will not get the automatic settlement rule
Hope this helps.
Regards,
PMAddi

Settlement rule - Internal orders

Hi all
Where do I define an automatic settlement rule for settlement of an internal order to a GL account? I do not find any strategy sequences that would settle to a GL account....
I know that I can use those strategy sequences for cost centers, WBS elements, etc.
Is there anything that I need to configure different?
Please help...
Thanks

Hi Raghu
Thanks for your quick reply. I am talking about the automatic settlement rule. I know how to create the settlement profile & define it manually when I create orders & make sure it gets settled to the GL account.
But my client wants to default that settlement rule whenever they create orders. For that I need to define an automatic settlement rule which will default itself to any order that i create with my order type.
It is under SPRO -> Controlling ->Internal Orders ->Actual Postings->Settlement -> Automatic generation of settlement rules -> Startegy sequences. So there I dont find any GL account settlement strategy sequence. So I was asking if anybody have set that up before for an auto settlement rule.
Thanks

Auto Settlement rule creation problem at the time of PM order release

In SPRO, for order type GEN, already customization available as "Madatory for Release" for order type. But still automatically settlement rule is not being created in IW31/IW32 at the time of release.
If I go to Settlement rule in GO TO option-Settlement Rule in IW32, then system is asking me two options as as With default and Without default. With default settlement, settlemement rules are coming.
But my query is, even if it is mandatory for release, why system is releasing without creating distribution rule in IW31?
Pl. let me know if any config missing.
Vijay

Hi,
Please read note 195607 and see if it helps
regards
Waman

Automatic Settlement rules generation

Similar Messages

Maybe you are looking for