Error during Stock movement between two storage type

Dear Friends
How do i move the stock from one storage type to other storage type within a warehouse?
In the material master i have maintained a storage type indicator for automatic storage type determination.
now when i create a TO for moving the stock from the orginal loaction to other location (NOT INTERIM) i am getting an error
Error occurred during storage section search (1740 003)
Message no. L3041
Diagnosis
No storage area search has been defined for this material and this storage type.
Please assist
Thanks

Dear,
       Kindly specify the storage section indicator in Material Master - WM view.
Regards,
Sandip

Similar Messages

  • Stock transfer order between two storage locations in IS Retail

    Hi,
    I want to have a Stock transfer order between two storage locations in the plant.
    I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
    Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
    I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
    Tnx
    Lior

    Hola.
    Voy a contestar tu pregunta en espanol. Debes crear al centro  emisor  como  deudor  en la transaccion WB02  y ampliar a la organizacion  de compra.
    Posterior, debes crear al centro  receptor como  acreedor en la transaccion  wb02.
    Cesar Moreno. Funcional MM Retail.

  • Transfer of stock between the storage types in WM

    Hi Gurus,
    can any one tell me the proceedure how to transfer a material in warehouse between the storage types.
    For example if i have a stock of 100 Nos.ina warehouse of storage type 916 (Goods issue for Deliveries) Ineed to transfer this stock to my permanent bin Storage type of 001.
    Sunil

    Hi
    Use LT01 & create Tansfer order (TO), Input material ,plant,storage location.
    Provide the required inputs like Source & destination storage type,storage section & Bin numbers.
    Finally confirm the TO, it will be done.
    Regards,
    Ravindran

  • Stock Transfer Between two plants within same company code

    Hello,
    We are using scenario-'Stock transfer between two plants within same company code. Scenaro is like Plant A is receving plant and Plant B is delivering Plant.
    Plant A release PO for 100 nos to Plant B
    Plant B issues 100 nos (via delivery) to Plant A
    But Plant A receives only 50 nos physically so they do Goods receipt for 50 nos , but document got generated for 100 nos (when plant B issues material).
    Now Plant A do not want to receive remaining 50 nos physically, but wants to reduce material document which got created when goods issue posted by plant B
    Now stock in transis (mb5t) is 50 nos.
    How to reduce this material document. or any another alternative solution for this?
    Thanks,
    Shailesh

    Hi There
    Reversal of partial is not possible ,
    But you can use the Mov Type 557 and 558 to do the adjustments in Stock in transit qty
    Few more details on STO adjustments
    Hi There
    it can be settle in many ways,,,
    1. Receive the goods as 100 and Scrap the 50 nos from the received plant,,- If the receiving plant is responsible
    2.Revert the PGI/Transfer movement(Vl09) and send the 50 nos again from the supplying plant- of the Supplying plant is responsible,
    3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
    4. also you can check the below similar thread
    STO - material lost during tranfer from plant A to plant B
    5. If above are not ok, then receive the goods as 100, And raise the STO as your plant as supplying plant and receiving plant is (Supplied 50 nos less) plant,, Do the process without sending the material.. in this way that 50 nos can be adjusted,,
    6.Here is some more details
    557 Issue from stock in transit (adjustment posting)
    Only use this movement type (also the reversal movement type) under the following circumstances:
    Using movement type 557, you can correct purchase-order-independent stock in transit if
    - a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
    - stock in transit still exists, even though there are no open stock transfer orders for the particular material
    This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
    This movement type may not be copied.
    Note!
    Before using this movement type, note the following:
    - 392205 Analysis stock in transit / Correction if split valuation
    Possible special stock indicators:
    E, Q
    7. As previous post says if you have the note for this issue you can use that also
    You can use any one of the way to solve the issue, Hope it helps
    Cheers
    Senthil P

  • Stock Transfer between 2 Storage locations

    Dear All
    I want to configure Stock Transfer between 2 Storage locations.
    I have activated the same in configuration but can anybody provoide complete details at to how the process happens.Is there any standard document type to be used like UB in case of stock tranasfer between plants,do we craete SD Delivery etc.
    Regards
    Vaibhav Mahajan
    Edited by: Csaba Szommer on Aug 22, 2011 12:56 PM

    Hi
    Stock Transfer between 2 Storage locations,there is no seperate configuration needed( like stock transport order b/w plants  doc type UB), just goto MIGO
    There are 2 options are there for Stock Transfer between 2 Storage locations
    1. one step procedure movement type 311(from unrestricted to unrestricted)
                                                                   323(from quality to quality)
                                                                   325(from blocked to blocked)
    2. Two step procedure movement type 313 and 315(only possible from unrestricted to unrestricted stock)
    During this transfer no accounting document will generate because you are transferrring the stock within the plant,
    Thanks

  • GATP Stock transfer between two sublocations

    Hello,
    Is it possible to use Rules Based ATP to create an Stock Transfer between two sublocations in the same plant?
    The source sublocation (Storage Location) is assigned to a Storage Location MRP Area
    In the Rules we have defined a Location determination procedure that if it does not find ATP quantities in the main location it searches in the Storage Location MRP Area (Location Type 1077). The idea behind this rule is to treat the Storage Location MRP Area as a diferent location, but it does not works.
    I thank in advance for your kind cooperation.

    Hi Loknath / Verma,
    The STR  is between a Production Location an a MRP Area Location.
    I have created the rule, but no STR are created.  It does something very strange instead of what is expected.
    For example,
    I have 2 storage locations in PLANT1:
    - STL1 has 100 units of product 1
    - STL2 has 200 units of product 1. This SL is assigned to an MRP area
    In APO the No check on sublocation level  check is unchecked.
    I have cifed production location and the MRP area so two locations are created: one is  type 1001 and the other is type 1007.
    I have defined a Rule, so if there is not enough ATP cuantities in PLANT1 (Type 1001) it should search in the MRP Area (type 1007)
    If I have a sales order that asks for 150 units, rule is trigered.
    First thing that is very strange: when I see the Storage location substitution list, I cannot see the MRP Area. What I see is the production location.
    The other problem is when i look at the ATP quantities during ATO verification, they do not match with the ones I can see in RRP3.
    Anyway, I have taken a look at the link that Verma sent me, and I understand that if I use RBATP to create STR between storage locations, sub positions are created, and there is a requirement in our project that no subpositions should be created. So, even if I can make it work, I cannot used... Seems that I may investigate the problem in my spare time.
    Thanks a lot for your help.

  • Billing in Stock Transfer between two plants of two different company codes

    Hi Friends,
    I am doing the scenario of stock transfer between two plants of different  company codes.
    I have some issues in Billing for this..
    What are the settings do i need to to for Pricing in SD point of view.
    Ex:
    Supplying         /         Receiving
    Com.Code:2000     /        CompanyCode:1000
    Plant:2100              /         Plant:1100
    SA:2000/10/00      /          SA:1000/10/00
    I created Customer 5555 w.r.t sales area of supplying company code (2000/10/00)
    I created Vendor  7777 and assigned Supplying Plant 2100 in add purchasing data.
    In IMG Settings:
    Define Shipping Data for Plants: In Receving Plant i assigned customer 5555 and sales area blank
                                                        In Supplying Plant i assigned customer blank and sales area as 2000/10/00
    Create Checking Rule: Standard(B SD Delivery)
    Define Checking Rule: Standard(Avallability-01assigned to checking rule B)
    Assign Delivery Type and Checking rule: Document type(NB)-Supplying Plant(2100)-Delivery Type(NLCC)-Checking Rule-(B)
    Assign Doc Type:Supplying Plant(2100)-Receving Plant(1100)-Doc type(NB)
    What are Pricing settings in SD i have to do?????????
    Process:
    ME21N->VL10B->VL02N(PGI)->VF01(IV)->MIGO->MIRO
    I have gone through many threads in Forum but confusion in Pricing Part..
    Some are mixing with the inter company sales proces..
    Pls guide me..
    With Regards

    Do the following steps for STO Customizing:-
    1. Create a customer master record for the issuing plant.
    2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
    3. Repeat steps 1 and 2 for the receiving plant.
    4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
    The Process Flow would be as follows :-
    Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
    Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
    Once the goods arrive, you follow the standard procedure for incoming excise invoices:
    The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
    The excise supervisor then posts the excise invoice.
    Best Regards,
    Ankur

  • As to the data type of the data type of the difference between two date type of datas

    Hi,
    I have a question about the data type of the difference between two date type of datas.
    There are two date type of datas as:
    SSHIPMENTS.RECEIVEDATETIME
    SSHIPMENTS.PROMISEDATETIME
    I try to use the following SQL Script in Oracle SQL*Plus as:
    SELECT CASE
    WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:00:00.000' THEN 'OnTime'
    WHEN (SSHIPMENTS.RECEIVEDATETIME - SSHIPMENTS.PROMISEDATETIME) < '000 01:30:00.000' THEN '60-89 Minutes'
    ELSE '3+ Hours'
    END
    FROM SSHIPMENTS;
    The error message of "Invalid Number" for the '000 01:30:00.000' happens.
    I don't know if the data type of the interval is wrong.
    Many Thanks,
    Cathy

    SELECT CASE
    WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss')) < '010000' THEN 'OnTime'
    WHEN (to_char(SSHIPMENTS.RECEIVEDATETIME,'hhmiss') - to_char(SSHIPMENTS.PROMISEDATETIME,'hh24miss'))< '000 01:30:00.000' THEN '60-89 Minutes'
    ELSE '3+ Hours'
    END
    FROM SSHIPMENTS;
    just try it out..

  • Intra-company stock transfer between two ERP Systems without SAP APO

    Hi,
    I'm looking for information regarding the scenario Intra-company stock transfer between two ERP Systems without SAP APO.
    On help.sap.com, I can only find below image, but I'm actually looking for the configuration settings required to implement it.
    Does anyone have experience with this scenario?
    Thanks & regards,
    Oliver

    Hi Jagdeep,
    Thanks for the reply. I understand that I need to use iDocs and setup communication between both systems. What I am actually looking for is detailed information on the setup of the purchase order type and sales order type. Especially because there is no invoicing involved in this flow.
    Regards,
    Oliver

  • How to exclude stock of a particular storage type from collective availabil

    How to exclude stock of a particular storage type from collective availability check in MDVP.

    you can set the storage location as 'Storage location stock excluded from MRP' value '1' in the field
    Sloc MRP indicator , in MRP view $ when you enter a storage location accessing the material master.
    Thsi is the only way to exclude the storage location, you have to do it per each material and also it is excluded from the MRP.
    With this option the stock is not considered in ATP.
    IF you need the storage location in the MRP, then you should consider the use of MRP Areas.
    With the MRP Areas you define which plants/storage locations belong to each MRP area and the ATP is performed for eah area with the stocks that exist in each of them.
    Please if the issue is solved set the thread  as answered and provide the points to the useful replies.
    thanks for your cooperation

  • Inspection lot for Mvt type 311 between two storage location only

    Hello all,
    I want to create an inspection lot only whenever my material transfer between two particulars storage locations. e.g if i have multiple storage locations, then i need an inspection lot to be created whenever my material transferred from say X S.Loc to Y S.loc only. For other transfers i don't need to create an inspection lot even from Y to X.
    For more clarity, suppose i have ten storage locations. i have also created one storage location for my Lab. So I want an inspection lot to be created only when my material transfer to my Lab storage location from any other storage location, not when i transfer from my LAB to any other S.Loc or between two S.Loc other than LAB.
    I have activated inspection type 08 but it does not have a restricition on S.Loc.
    So please suggest some solution for the same.

    Dear Amit
    In this case what you can do is make a copy of 311 movement type, say Z11. Deactivate QM for 311 and activate QM for Z11
    So whenever you want inspection lot to be created use Z11.
    You can activate and deactivate QM in QCCO > Quality inspection > Inspection lot creation > inspection for goods movement
    Regards
    Gajesh

  • Stock transfer between two WM managed storage locations

    Hi,
    I want to transfer some stock between two wm enabled storage loc (wm 120 and sl  0001 to another wm 200 and sl 0006) but
    not able to do so. Got to know that there are two components involved in this one IM and WM. I am new in WM so do not have much idea please provide me the right solutions.
    Thanks and Regards,
    Rahul
    Edited by: Rahul Shukla on Aug 23, 2010 12:30 PM

    Stock transfer w/o delivery:
    You can execute the goods movement in IM (one-step or two step) and after that you can process the TRs which are generated when posting GI/GR (hopefully your config is OK and TR is created automatically; else you have to maintain WM-IM interface). You can process the relevant TR from LB10 both in supplying plant (TO wiill be created from TR --> stock removal) and in receiving plant (TO will be created from TR --> putaway TO)
    Stock transfer with delivery:
    In supplying plant you have to pick the delivery (you have to create TO), you can do this e.g. via trx LT03, VL06O, VL02N (from "Subsequent functions" manu). In receiving plant you have to process the TR (from LB10) which is generated when GR is posted.
    (based on your WM-IM interface setting you may not get TR but immediate TO creation can be triggered, etc. If you are using inbound delivery as well you have to create putaway TO, etc.)
    Please specify your problem you are facing - in this case you may get specific answer.
    Edited by: Csaba Szommer on Aug 23, 2010 1:51 PM

  • Transfer of stock between two storage locations within a plant in two steps

    Hi,
    We have a plant 6400 & we have two storage locations 6401 & 6402. Each storage location belongs to a department which are located at some distance from one another.
    The material to be moved from one storage location to another using a truck.
    For the above mentioned process can we have the following process
    (1) In first posting the material is issue from the storage location to a transit
    (2) In second posting the material from the transit is received into the storage location
    I am looking for a feature that is possible between two plants, can we have a similar feature available within a plant.
    Warm regards,
    Umesh

    Hi Umesh,
    It would be a business decision i suppose. If those 5 nos. are lost / damaged in transit & needs to be scrapped, then the ownership needs to be decided first. If it lies with the sender, then reverse the 5 nos. (MB1B mvt is 314) & then proceed with your scrapping or if it lies with the receiver then receive the 5 nos & then proceed with the scrapping.
    Posting in system is one aspect, but a clear business rule is the key factor. So discuss with your materials mgmt personnel to define the process flow.
    Hope the above helps.
    Regards,
    Vivek

  • Stock transfer between two St locs of same warehouse

    Hi All,
    I am new to WM and trying to config/simulate st loc to st loc transfer 311
    one step between two st locs that belong to same warehouse number.
    What should be the config and under
    LE->WM->Interface->IM->movement types -> assign WM Movement Type
    References to IM Movement Types. In my system for 311 movement type entry with
    only the quantity check box checked and no other spl stock I see that there are
    three columns mentioned below
    For mvt types on WM side first one “Reference movement type for WM from
    material movements” = 311
    Second one “Reference movement type for transfer in warehouse mgmt.” =312
    Third one “Reference movement type for posting change in whse mgmt.”=309
    The reason I am confused is when I do a MB1B 311 from one st loc to another
    st loc from unrestricted to unrestricted on IM side it is triggering 309 on WM
    side where as I am expecting 311 to trigger with TR to pick from issuing St loc
    and another TR/TO with (312 or 311 I am not sure) to putaway the stock in to
    the receiving st loc. Can someone help in explaining how should the stand SAP
    IM/WM interface work and what should I be doing to make it work that way
    Thank you in advance
    J

    Hi J,
    To explain you in simple way,
    When Sloc is Wm managed and stock is transferred at IM level using 1 step within plant, stock is directly transferred from one sloc to other sloc(no TR/To is created to pick and putaway unless configured)  Due to this difference is created between IM & WM level, Hence mvt type 309 is triggered for PCN . This Mvt 309 is picked based on std config at
    LE->WM->Interface->IM->movement types -> assign WM Movement Type
    References to IM Movement Types
    If you want to create TR immediately then put x in 9 column against mvt 309 and w/h combination.
    LE->WM->Interface->IM->movement types -> LE-WM Interface to Inventory Management

  • Stock transfer from 998 storage type to Physical bins

    Dear Experts,
    As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    4) I want to print the storage units simultaneously during this process. How can I do this?
    I really appreciate your help.
    Thanks

    Answering your questions:
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    Use this info to load the stock into the correct storage bin
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    Don't really understand what your doubt is, but if your MM/WM setup is correct, this should go OK
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    LSMW, with 'Standard batch/Direct Input' Object 0220 and Method 0000 (should be assigned to program RLBEST00).
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    Based on previous answer, no!
    4) I want to print the storage units simultaneously during this process. How can I do this?
    Just assign the correct print code to the 561 movement type...but beware for the fact that a lot of labels will be generated at the same time and you can stuck your printer :s

Maybe you are looking for