Error executing RDS command. Status Code : 503 , Reason : Service Unavailable

Hi,
I am being trying to connect a Flex desktop application with a Java application running in Tomcat (6.0.29), and I get this error message when trying to use the Data wizard to connect with Blaze DS.
I have read all the tutorials and everything looks good from the server side. This is what appears in the server log:
2011-01-27 16:02:33,030 [ INFO] - RemotingDestinationExporter - Created remoting destination with id 'accounts'
2011-01-27 16:02:33,046 [ INFO] - RemotingDestinationExporter - Remoting destination 'accounts' has been started started successfully.
2011-01-27 16:02:33,046 [ INFO] - RemotingDestinationExporter - Created remoting destination with id 'customers'
2011-01-27 16:02:33,046 [ INFO] - RemotingDestinationExporter - Remoting destination 'customers' has been started started successfully.
2011-01-27 16:02:33,061 [ INFO] - FrameworkServlet - FrameworkServlet 'flex': initialization completed in 3887 ms
2011-01-27 16:02:50,813 [ INFO] - MessageBrokerHandlerAdapter - Channel endpoint my-amf received request.
2011-01-27 16:43:42,897 [ INFO] - MessageBrokerHandlerAdapter - Channel endpoint my-amf received request.
(The last two lines appears when I put the AMF channel's URI in a browser).
Below is what appears in the Event log from Eclipse.
java.lang.RuntimeException: java.lang.RuntimeException: RDS server message:
Error executing RDS command. Status Code : 503 , Reason : Service Unavailable
at com.adobe.flexbuilder.services.j2eeservice.J2EEServicePage.setVisible(J2EEServicePage.jav a:149)
at org.eclipse.jface.wizard.WizardDialog.updateForPage(WizardDialog.java:1171)
at org.eclipse.jface.wizard.WizardDialog.access$2(WizardDialog.java:1149)
at org.eclipse.jface.wizard.WizardDialog$5.run(WizardDialog.java:1138)
at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
at org.eclipse.jface.wizard.WizardDialog.showPage(WizardDialog.java:1136)
at org.eclipse.jface.wizard.WizardDialog.nextPressed(WizardDialog.java:830)
at com.adobe.flexbuilder.DCDService.ui.wizard.ServiceWizardDialog.nextPressed(ServiceWizardD ialog.java:93)
at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:369)
at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:624)
at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:228)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3910)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3503)
at org.eclipse.jface.window.Window.runEventLoop(Window.java:825)
at org.eclipse.jface.window.Window.open(Window.java:801)
at com.adobe.flexbuilder.DCDService.ui.wizard.ServiceWizard.show(ServiceWizard.java:190)
at com.adobe.flexbuilder.DCDService.ui.wizard.ServiceWizard.createService(ServiceWizard.java :152)
at com.adobe.flexbuilder.dcrad.views.ServiceExplorerView$1.handleEvent(ServiceExplorerView.j ava:528)
at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)
at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)
at org.eclipse.swt.widgets.Link.wmNotifyChild(Link.java:1004)
at org.eclipse.swt.widgets.Control.wmNotify(Control.java:4877)
at org.eclipse.swt.widgets.Composite.wmNotify(Composite.java:1757)
at org.eclipse.swt.widgets.Control.WM_NOTIFY(Control.java:4507)
at org.eclipse.swt.widgets.Control.windowProc(Control.java:4000)
at org.eclipse.swt.widgets.Display.windowProc(Display.java:4632)
at org.eclipse.swt.internal.win32.OS.CallWindowProcW(Native Method)
at org.eclipse.swt.internal.win32.OS.CallWindowProc(OS.java:2314)
at org.eclipse.swt.widgets.Link.callWindowProc(Link.java:172)
at org.eclipse.swt.widgets.Widget.wmLButtonUp(Widget.java:1917)
at org.eclipse.swt.widgets.Control.WM_LBUTTONUP(Control.java:4301)
at org.eclipse.swt.widgets.Link.WM_LBUTTONUP(Link.java:842)
at org.eclipse.swt.widgets.Control.windowProc(Control.java:3982)
at org.eclipse.swt.widgets.Display.windowProc(Display.java:4632)
at org.eclipse.swt.internal.win32.OS.DispatchMessageW(Native Method)
at org.eclipse.swt.internal.win32.OS.DispatchMessage(OS.java:2411)
at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3501)
at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2405)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2369)
at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221)
at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500)
at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
at org.eclipse.equinox.launcher.Main.main(Main.java:1287)
Caused by: java.lang.RuntimeException: RDS server message:
Error executing RDS command. Status Code : 503 , Reason : Service Unavailable
at com.adobe.flexbuilder.services.j2eeservice.J2EEServicePage.initialize(J2EEServicePage.jav a:187)
at com.adobe.flexbuilder.services.j2eeservice.J2EEServicePage.setVisible(J2EEServicePage.jav a:136)
... 61 more
Any help wolud be appreciated.
Thanks

Hi There,
I am getting the same error. can anyone tell me what could be problem?

Similar Messages

Error executing RDS Command Status Code 504

Hi,
I'm new to the flex world & was trying out the testdrive application at http://www.adobe.com/devnet/flex/testdrive/articles/1_build_a_flex_app2.html
I've installed Flex Flash builder 4 on top of my eclipse installation and I'm using Tomcat as the servlet container for deploying the testDrive WAR file (which contains the remote services).
When I try to connect to the 'BlazeDS' from Data-> Connect to BlazeDS option; I get a Status code - 504, Reason: Connect Error.
Can anyone please point me to the right direction, I've tried everything I could but no luck.
Thanks in advance for your time.
Cheers,
J

With all the problems people have with this error, you'd think there would be a FAQ about it. is this it? no answers?
no one knows why this happens with eclipse/FB4 on a windows xp system? is this the kind of support you get from Adobe?
this is EXTREMELY frustrating!!!!!!! please Adobe,HHHEELLPPP!!!!!

Http server code 503 reason Service Unavailable explanation Service Unavail

Hi all
I am trying to send data to a HTTP SITE.
I am getting the following error.
Could somebody guide me how to solve this.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>Oxalate</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>503</SAP:P1>
<SAP:P2>Service Unavailable</SAP:P2>
<SAP:P3>Service Unavailable</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Http server code 503 reason Service Unavailable explanation Service Unavailable</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thankyou

Same errors are comming up.
Could not do a RFC connection to website.

HTTP request failed. Error code: "503". Service Unavailable in RWB and Cache Refresh

Dear Experts,,
We have MDM and PI in our landscape. We are using MDM Adapter for the integration between the two.
When we try to run the T Code SXMB_IFR, we are getting HTTP request failed error. i.e., “Error Code: 503 -- Service Unavailable”. And also the RWB communication channel is not working because of this error and we are unable to refresh the cache too because of this error.
We have checked from MDM side, and messages are flowing from ready folder but not coming into PI. We had monitored the messages using
SXMB_MONI.
We have restarted the Java Server but it’s taking too much time to restart around 12 to 15 hours & we checked after that but still facing the same issue.
Could you please help me to figure out this issue.
Thank you for your support in advance.
Thanks and Regards,
Priti.

Hi Priti,
You can check the suggestion of Jyothi Anagani
Because of J2EE application com.sap.aii.af.ms.app not active
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Runtime Workbench "503 Service Unavailable" Error After JSPM SP Update
Regards,
Nabendu.

Error executing RDS command. Status Code : 404 , Reason : Not Found

Anyone know how I would resolve this error?

There can be any number of reasons. First would if the RDS feature is disabled on the server you’re connecting to. Second, that web server (if you are using one) could be configured to block RDS requests (or perhaps even all requests to url’s with CFIDE in them). You could address those, but before you do, please do share more about your use of CFB.
To be clear, are you meaning to intentionally use the feature in CFB where you define a server (and optionally connect a project to that server), so that you can use features to allow you to access server resources (database info, CFC, and more) from within CFB? You would typically only do that in connecting to a development server. Just want to know what your intentions are before leading you to enable something on a server that you don’t really need.
And while we await those answers, and whether the first paragraph may get you going to a solution, is this CF server something you’re connecting to (the RDS url) using the server’s external web server (like IIS or Apache, such as is typical if you have no port in the URL), or via CF’s built-in web server (such as is typical when you have a port like 8500 in the URL)? That may be important in helping to solve your problem.
For instance, if the server (and the URL you’re using) uses IIS, then if you visited the URL for RDS in a browser on the server itself, you may get a much more clear explanation of the problem (since by default, IIS shows more details for requests made ON the sever itself than it does for requests from off the server). The RDS URL (which is generated by the RDS feature in CFBuilder, not something you normally type) is /CFIDE/main/ide.cfm, so append that to the domain or IP address of the server you have configured CFBuilder to use, and see what more detail you may get in your browser.
/charlie

Error executing RDS command. Status Code:404

The following problem really made crazy. I worked it for a whole day and still didn't figure it out. could someone help me ? Thanks a million.
I created a project using this way:
and select a tomcat server 6.0.*
and my RDS configuration in my web.xml is this:
part of my web.xml
<servlet>
        <servlet-name>RDSDispatchServlet</servlet-name>
        <display-name>RDSDispatchServlet</display-name>
        <servlet-class>flex.rds.server.servlet.FrontEndServlet</servlet-class>
        <init-param>
            <param-name>useAppserverSecurity</param-name>
            <param-value>false</param-value>
        </init-param>
        <load-on-startup>10</load-on-startup>
    </servlet>
    <servlet-mapping id="RDS_DISPATCH_MAPPING">
        <servlet-name>RDSDispatchServlet</servlet-name>
        <url-pattern>/CFIDE/main/ide.cfm</url-pattern>
    </servlet-mapping>
when I created my flex project, and added it to the server using the way of Add web module... . After that, I started my server, and changed to this view:
I clicked "Connect to Data/Service..." and selected the service type "BlazeDS". When the Flash Builder popped up a Authentication window, I checked "No password required" and clicked the OK button, and then, the problem comes out.
Any clues for this problem? Thank you.

With all the problems people have with this error, you'd think there would be a FAQ about it. is this it? no answers?
no one knows why this happens with eclipse/FB4 on a windows xp system? is this the kind of support you get from Adobe?
this is EXTREMELY frustrating!!!!!!! please Adobe,HHHEELLPPP!!!!!

Status code 503--Service Unavailable

Hi everyone.
A little time ago I 've faced status code 503 -- service unavailable on XI 3.0, so I found Sap Note 803145 and applied it.
The note says to change the PollAttempts parameter from 60 to 100 and that's supposed to solve the problem.
Actually it seems that problem is solved, but occasionally it keeps apearing the same error (status code 503 -- service unavailable).
I've checked all PollAttempts parameters and they are in 100 like the note says.
Before the Note application the error was appearing in some messages that use SOAP and JDBC Adapters, but now this error is only appearing in JDBC adapter.
Not all messages that use JDBC adapter are erroneous, the tricky thing here is that some messages that appear with this error can be restarted and processed succesfully but others can not be restarted.
Can someone give me some light in this??
Thanks in advanced.
Emmanuel Rebolledo

Hi Emmanuel,
The "pollIntervall" and "pollAttempts" properties define how often and in what
interval the messaging system tries to access the Listener Beans
during startup (using JNDI Lookup). In the default system, this is a maximum
of 10 attempts every 60 seconds. This is necessary because the Messaging
System (MS) is implemented as a J2EE service, whereas EJBs are part of a
J2EE application. During server startup, applications are always in a second
phase after the services; therefore they are unavailable during the MS
initialization. If your system starts very slowly (if it takes more than 10
minutes), you may therefore need to increase "pollIntervall" and
"pollAttempts".
Default: pollInterval=60000 [ms], pollAttempts=10
Regards
joel

HTTP response contains status code 503

Hi All,
Im working on File to JDBC scenario using MsAccess.My file is been picked by XI from the sender folder (im using NFS at the sender side), but it is not inserting the data in the table which i have created on the server.
When i do SXI_MONI , i'm getting a error in call adapter "HTTP response contains status code 503 with the description Service Unavailable Error while sending by HTTP (error code: 503, error text: Service Unavailable)".
Plz do help me to solve it.
Thanks,
Suma

Hi,
503 Service unavailable
this is because of the server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
you can go for the possible solution as mentioned below:
Because of J2EE application com.sap.aii.af.ms.app not active
1. Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine.
2. The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
3. Refer SAP Note 803145,807000,791655
4. In Visual Admin, check if all the required services are running and start them, else restart the Java Stack in the XI server.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi /people/vinoth.murugaiyan/blog/2007/08/06/how-to-the-change-the-application-stopped-message
http://help.sap.com/saphelp_nw04/helpdata/en/64/351941edd5ef23e10000000a155106/frameset.htm
thanq
krishna

HTTP response contains status code 503 with the description

<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 503 with the description
Service Unavailable Error when sending by HTTP (error code: 503, error
text: Service Unavailable)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Please advice. Initially we thought the J2EE services were unavailable . But now even when the services are running we still have the same issue when there is a http call from an external application to XI . The message get posted but there is an error on the response back to the external application.
Even the contract which was supposed to be created in ERP from the external application did not get created.
Please advice.
Thanks,
Nivedita

Hi Nivedita,
503 means Service Unavailable
just check whether you cn ping the HTTP server host and port is open.
if not then consult the vedor and make both open first.
Also if you want to restart the java engine
then run T-code SMICM
Then go to administration then JAVA restart soft.
it will help you.
Regards,
Sumit Gupta

Error in file-file scenario: HTTP response contains status code 503

Hi folks,
I've encountered the foll error in file-file scenario:
Testing file-file scenario (followed the blog: https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/flatFILETOFLATFILE&)
Initially i was hving problems with recvr comm channel, which are now resolved. File is sent successfully but not recvd. I tried to modify the scenario above and change the file type to 'Text' but still got the same error.
I've checked SICF -->default_host/xi/engine , we dont maintain logon data there. when i test the default_host/xi/engine service, it resolves into an ip addr as follows:
http://<hostname>.<domain.com>:8001/sap/xi/engine?sap-client=<clientNo>
(Also, we hv a BW system running on the same server ,which uses a fully qualified domain, while we dont which is why we get the above domain. Im not sure if there are any issues with that.)
and we get the foll error:
Error Code 10060: Connection timeout
If i remove the domain manually, im prompted for userid/pwd and get the foll result:
- <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Header />
- <SOAP:Body>
- <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<faultcode>SOAP:Client</faultcode>
<faultstring>Pipeline specified in URL attribute (type) not existing</faultstring>
<faultactor>http://sap.com/xi/XI/Message/30</faultactor>
- <detail>
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">URL_PIPELINE_NOT_FOUND</SAP:Code>
<SAP:P1>/sap/xi/engine?sap-client=<clientNo></SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Pipeline ID , which is expected as value of attribute "type" in the URL, does not exist in the Integration Engine (URL = /sap/xi/engine?sap-client=811)</SAP:Stack>
</SAP:Error>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
also, we dont hv any overload issues as this is dev env and not many of us are using the xi server. Would really appreciate if any of you can share your inputs on how to resolve this. Thanks!!
cheers
Prachi

Hi ,
Look in to this for all errors
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server. The implication is that this is a temporary condition which will be alleviated after some delay. If known, the length of the delay MAY be indicated in a Retry-After header. If no Retry-After is given, the client SHOULD handle the response as it would for a 500 response.
Note: The existence of the 503 status code does not imply that a server must use it when becoming overloaded. Some servers may wish to simply refuse the connection.
Possible Tips: Because of J2EE application com.sap.aii.af.ms.app not active
Try to (re)start the application using the Visual Administrator Choose Server --> Services --> Deploy --> View on Application or restart the J2EE engine
The problem is that not all J2EE services can be started by the J2EE. i.e Start the Visual Administrator and select Server->Services->Deploy in the tree on the left. On the right-hand side, choose the Runtime tab page. You see a tree in the right window with all applications if you select the APPLICATION radio button. Check if they are running, otherwise choose Start. Usually the J2EE engine starts all services automatically.
Refer SAP Note 803145,807000,791655
<b>Award Points if found usefull.</b>

Demo Error - HTTP response contains status code 404

Dear all,
While configuring the first demo on XI 3.0, I encountered the following errors when executing the scenario. The scenario is "Configuring Integration Scenarios for proxy-to-proxy communication" - Checking flight seat availability.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>404</SAP:P1>
<SAP:P2>Not Found</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b> 404 &nbsp Not Found</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/6.40 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b> The requested resource does not exist.</b></font></p> <p><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b> Details:</b></td><td valign="top"><PRE>Go to <A HREF="/" target="_parent">main page</A> of this application!</PRE></font></td></tr></table></font></p> </body> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 404 with the description Not Found XML element Envelope missing in SOAP message header (SAP XI Extension)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Any pointers on this is greatly appreciated!!
Thanks,
Cyanna

Hi Michal,
Thanks for your response! I followed the instruction on question 17, and recheck my configuration of the integration engines (for client 105/106/107 as stated in the SAp demo), and change the 'Corresponding Inte. Server" back to the format "dest://<RFC destination for inte. server>". I had that initially, and decided to try using the entire http path (http://<local_host:J2EE port>/sap/xi/engine/?type=entry). Neither of them worked.
Do I need to restart or reactivate any components after I changed the corresponding integration server value after the configuration?
Since the above did not work, so I went back to the possible root cause (Integration Server RFC destination). I have set up the integration server RFC destination in client 100, with the following parameters:
Under Technical Settings:
Host: <local_host>
path prefix: /sap/xi/engine/?type=entry
service no.: 5<instance>00
Under Logon/Security:
Logon Precedure: chose Basic Authentication
Client: 100
Login ID : XIAPPLUSER
Afterwards, I did the "Test Connection", and it returns the 404 error.
In addition, on the application systems side (in the demo, the case will be client 105/106/107), I have ensured the business systems are set to "application system".
Any help is greatly appreciated!
Thanks much!
Regards,
Cyanna

Error Handler Returning 200 Status Code

Greetings,
I have a section of my site assigned to be an "Error Handler" however when a user is brought to this page, the status code is a 200. As you can imagine, this has the potential to cause a lot of problems for processes that rely on status codes to operate.
I have found the following solution on another site, indicating to place this Idoc Script code at the top of the Page Template:

Unfortunately, doing the above does not work. Am I missing something?
Any help is appreciated. Thanks!
Josh

Hi Srinath,
First of all, thanks for taking time to help. I removed the tag that I previously had inside of my Page Template and put yours in the body, however my page still returns a 200. I completely stripped the Page Template of all but the necessary markup.
<!DOCTYPE html>
<html lang="en">
<head>
     <meta charset="UTF-8">
     
     <meta http-equiv="X-UA-Compatible" content="IE=edge" />
     <meta name="viewport" content="width=device-width, initial-scale=1">
     <script id="ssInfo" type="text/xml" warning="DO NOT MODIFY!">
          <ssinfo></ssinfo>
     </script>
</head>
<body>
     
</body>
</html>
Thanks!

ERRORs executing CWM commands in SQL Plus

Hi,
I tried to execute following command in SQL Plus:
execute cwm_olap_dimension.set_plural_name('olapdata', 'OLAP_APARAT_DIM', 'OLAP_APARAT_DIM');
And in response I got following result:
BEGIN cwm_olap_dimension.set_plural_name('olapdata', 'OLAP_APARAT_DIM', 'OLAP_APARAT_DIM'); END;
ERROR at line 1:
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.CWM$UTIL", line 535
ORA-06512: at "OLAPSYS.CWM$OLAP$DIMENSION", line 17
ORA-06512: at line 1
Can anyone explane me what am i doing wrong ?
I would really appreciate any help!
Thanks

check SQL*Plus user's guide
e.g column REMARK format a30
set linesize 2243
etc etc etc

Error: Server returned HTTP response code: 503

Hi All,
I am trying to import a web service WSDL (which is not a BPEL or ESB service) on creating a partnerlink in BPEL. I am getting following error while importing,
"java.io.IOException: Server returned HTTP response code: 503 for URL: http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"
Does anyone know the cause and fix for this issue.
Thanks,
Rizwan

Hi,
Have u tried to open the wsdl url in browser. If it is giving the same error than u have to look into the server hosting this service.
The HTTP response code 503 says: The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.

Error opening a file in a KM repository - Service Unavailable (503)

Hi,
I created a repository FSDB, and now is running OK.
When I try to open any file from this repository (or click "save target as"), open a new page empty with the message "503 - Service unavailable".
My version is:
Portal 6.0.9.0.0
KnowledgeManagementCollaboration 6.0.9.0.0 (NW04 SPS09)
is a bug? is necesarry install a patch?, I am missing some configuration? when i used EP 6.0 SP2, I didn't have this problem with repository.
thanks in advance !
regards
Leandro

thanks venkat for the quick response!
I will try upgrading SP14 next week,
but I keep the doubt about if this is a configuration problem or a bug of this version,
regards

Error executing RDS command. Status Code : 503 , Reason : Service Unavailable

Similar Messages

Maybe you are looking for