Error - Failed to import Content Inventory

Hello all,
I'm having an issue uploading a SCORM elesson created to our LMS, and I'm hoping that one of the wise people out there may be able to help me out.
The project setting used, are the same as I've previously had success using.
There is no object outside of the stage.
The naming of the file project is ver simeple... 2 letters.
There is no Quiz.
Whilst trying to upload the zipped file to our LMS, I get this error:
The upload of this document failed. Error discribtion:
Error Encountered
(43073) Failed to import Content Inventory: IT - IT Work Processes Introduction
(43269) Invalid content. (*)ERROR: Failed to extract the manifest file from content package. Possible cause: The markup in XML document (manifest file) preceding the root element is not well-formed.'
Any ideas anybody?
Thanks ahead of time

No sorry. I only use the pdf version to send to people for reviews. When it comes to publishing it to the LMS (SABA), I zip it with Captivate (with no pdf). The zip file contains the HTML/SWF Files etc. included below is my normal package, unzipped.
and this is the one I'm having problems with:

Similar Messages

Failed to import ActiveX control

I am using VB2005 express and VC#2005 express. With my old friend
VS2003, whenever i needed to add flash to my WInforms, all i needed to
do was to add the control as a com component and drag it on the stage
from the toolbar. Now, when i did the same in new express version,
althogh it is added in the toolbars and the references list, but still,
whenever i try to drag a shockwave flash instance on my win form, i get
the error:
Failed to import ActiveX control, please ensure it is properly registered.
does some one have any idea how to add flash comntrol as we used to do in earlier versions? Please reply this ASAP.
Thanks and regards.
Syed Mazhar Hasan

None of these solutions are working for me.
In VS2005 I'm stuck. I also have VB6 installed, and there the OCX imports fine. In VS2005 I get the above error message, but sometimes I also get a ResolveComReference error.
1) When I go to the obj directories the interop files aren't even generated (so the delete then re-add solution doesn't work for me).
2) running tlbimp on the ocx gives me a TI0000.exe error - Error loading library
3) running aximp on the ocx generates a TYPE_E_CANTLOADLIBRARY error.
This ocx has loaded fine in VS2005 before I reformatted my PC, and loads fine on other machines. VS2005 is local, but our code is on a server share drive, so my first thought was some kind of security settings was messed up, but I moved everything to a local drive and still no dice.
I've also made sure that I have the latest VS2005 service packs, and XP is compeletly up-to-date.
I've been working on this for almost a week with no progress, and I'm getting pretty desperate. Anyone have any other ideas?

Import of gmail cert errors out - [ERROR]   - Failed import certificate: gmail

I am trying to use javamail to read mail from gmail. When I try to import the ssl cert from the comman line it errorsout
java -jar lib/javacloud.jar add-ssl-certificates -user user -serviceinstance serviceinstance -identitydomain identitydomain -path /Users/user/gmailssl/ssl.cer -datacenter us2 -alias gmail
[ERROR]   - Failed import certificate: gmail, content: -----BEGIN CERTIFICATE-----
            LS0tLS1CRUdJTiBDRVJUSUZJQ0FURS0tLS0tCk1JSUVkakNDQTE2Z0F3SUJBZ0lJ
            R2NNRjdqZVZNb0F3RFFZSktvWklodmNOQVFFRkJRQXdTVEVMTUFrR0ExVUUKQmhN
            Q1ZWTXhFekFSQmdOVkJBb1RDa2R2YjJkc1pTQkpibU14SlRBakJnTlZCQU1USEVk
            dmIyZHNaU0JKYm5SbApjbTVsZENCQmRYUm9iM0pwZEhrZ1J6SXdIaGNOTVRRd056
            RTFNRGcwTURNNFdoY05NVFV3TkRBME1UVXhOVFUxCldqQm9NUXN3Q1FZRFZRUUdF
            d0pWVXpFVE1CRUdBMVVFQ0F3S1EyRnNhV1p2Y201cFlURVdNQlFHQTFVRUJ3d04K
            VFc5MWJuUmhhVzRnVm1sbGR6RVRNQkVHQTFVRUNnd0tSMjl2WjJ4bElFbHVZekVY
            TUJVR0ExVUVBd3dPYzIxMApjQzVuYldGcGJDNWpiMjB3Z2dFaU1BMEdDU3FHU0li
            M0RRRUJBUVVBQTRJQkR3QXdnZ0VLQW9JQkFRQ3U0dk9yCkxneU5zSGljeEJPUmdP
            Mk9PZlhLeEVLYjgzME56TnU2ZWx1YmJmMVQ0NUdpbEIzZkhnRFFKRUxSeWRUUlpp
            bG8KRWZ2NzVBZzd1UlFNL00xdGsrMWgxOHdEcEpaZW0rekZtSmNzMzBjY0JOMjFD
            bkN2cXNJRVlKTXlZM2tjVjR2RAp4NDRieDZWdkVBbUo5L2tpRko3eFJVbENjaHU1
            WVZPRm9Wa01hRWF4M1VXYjVGdGk5cGU4VmdZZGFzdWs1M2FlCjhadUlyNHBGZXc5
            ZnJheE9lLzZMWEVhUE1TdzYyMktTV3B5Sy9HVWJhQXAwN2hWMTFjK0xWZ2psVURU
            Z0ErMmsKbkRpZ1dyZGIreUxMOUh2M1dOTFdqRUFIRldoRWNlNVF3VjNTTjhKTGdh
            M1JidzJOM2xxOWFma1F0T25rSmdkTQpVRzR4a1VIR3FzY2dnTURKQWdNQkFBR2pn
            Z0ZCTUlJQlBUQWRCZ05WSFNVRUZqQVVCZ2dyQmdFRkJRY0RBUVlJCkt3WUJCUVVI
            QXdJd0dRWURWUjBSQkJJd0VJSU9jMjEwY0M1bmJXRnBiQzVqYjIwd2FBWUlLd1lC
            QlFVSEFRRUUKWERCYU1Dc0dDQ3NHQVFVRkJ6QUNoaDlvZEhSd09pOHZjR3RwTG1k
            dmIyZHNaUzVqYjIwdlIwbEJSekl1WTNKMApNQ3NHQ0NzR0FRVUZCekFCaGg5b2RI
            UndPaTh2WTJ4cFpXNTBjekV1WjI5dloyeGxMbU52YlM5dlkzTndNQjBHCkExVWRE
            Z1FXQkJTYW5aQnZZK1JuajBIcXVKbWFlOUFKdndpQ3pUQU1CZ05WSFJNQkFmOEVB
            akFBTUI4R0ExVWQKSXdRWU1CYUFGRXJkQmhZYnZQWm90WGIxZ2JhN1locTZXb0V2
            TUJjR0ExVWRJQVFRTUE0d0RBWUtLd1lCQkFIVwplUUlGQVRBd0JnTlZIUjhFS1RB
            bk1DV2dJNkFoaGg5b2RIUndPaTh2Y0d0cExtZHZiMmRzWlM1amIyMHZSMGxCClJ6
            SXVZM0pzTUEwR0NTcUdTSWIzRFFFQkJRVUFBNElCQVFDVm9HQU9LWm9pbDRzTkFZ
            dmxiOXV4Tm1XcVFxeWgKcWwwRDFiZXdiTHhzM0RTVldTZTJEaFBqamhkTUhNVGNN
            cEIralF6QWJHeFZZaXVOTGRxTGwxWGNkZTdFVW1vMQpLSlVHelRPMDQ2aysxMUxZ
            Vk94RVhMQmU1czNGRituaUZKYnk3WEZnbUkzeU10NGJsSE41dEhtLzdKaWpMMUlw
            CnZrY3N5bk9uT3dBRUhlaEkxVTEyTjBKRXBrY29ldE02TUE4Y0d0bjc0RVBUYXM0
            TnBhK21UTm8zc2VIOGlZNDMKNEw0aG5zdWJYTWhjUVE5SVFNUHRLdVpZTlVYa2xO
            L05TMGY2OUJlKzNIUVJUT2xqdEN4ZHBtL3YvZW1IUGp3ZwovQ3d1KzU4ZlpLK2Zs
            UTFQUWNZMjRDZ3Q3RUYwUit1cW81SWwzQ0d1Q2dyZDRKeEpOTXVHY3NHUwotLS0t
            LUVORCBDRVJUSUZJQ0FURS0tLS0tCg==
            -----END CERTIFICATE-----
I noticed that the content within the CERT is different. Not sure if that is relevant.

I am not sure what the "store.connect()" does, based on the exceptions seems to be trying to make non-https connection which based on the documentation is not supported:
Unsupported Features
Alternative
Remote invocations with a transport protocol other than HTTPS (including plain text HTTP).
Not applicable.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Error in crawl log "Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "

Hi
I get the following error in my crawl logs
"Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - The method or operation is not implemented..; SearchID "
Because of this i suspect, the search results are not including those aspx pages marked as "Hide physical urls from search".
This error is not available in the another environment where the aspx pages are coming in the results.
Thanks
Joe

Hi Joe,
Greetings!
Reset the index and re-crawl. That usually clears it
If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
Probably you need to debug the BDC code that underlies the external content types.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/41a86c43-151d-47cd-af73-967a4c940611/lotus-notes-connector-error-while-crawling-lob-contents?forum=sharepointsearch
Please remember to click 'Mark as Answer' on the answer if it helps you

ERROR :Conversion of file content to XML failed at position 0

Hi Frnds,
I have a File to File scenario, while testing I am getting the following error:
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'TA_830':java.lang.Exception: Consistency error: field(s) missing - specify 'lastFieldsOptional' parameter to allow this
Can any one please tell me why Iam getting this error even I have provided the following informantion in channel configuration. Here TA_830 is the record name.
TA_830.processFieldNames     fromConfiguration
TA_830.fieldNames     SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,REF_NUM,PAYER_ACC,VAL_DATE,ISO_CURRENCY,AMOUNT,RESV_11,SEG_NUM,EXCHG_RATE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_18,SEG_NUM,BANK_ID,BANK_CODE,ADDR1,ADDR2,ADDR3,ADDR4,RESV_5,SEG_NUM,ACCOUNT,ADDR1,ADDR2,ADDR3,ADDR4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,MESSAGE1,MESSAGE2,MESSAGE3,MESSAGE4,RESV_6,SEG_NUM,PROCESS_DATE,PAYEE_BCODE,ISSUE_SEQ_NUM,CR_DATE,PAYER_BCODE,PAYER_ID,ENTRY_SEQ_NUM,TRAN_TYPE,PAYMENT_TYPE,PROCESS_FLAG,TOTAL_AMOUNT,RESV_59
TA_830.fieldFixedLengths     2,6,12,5,6,7,5,5,3,1,1,16,24,6,3,15,11,2,12,24,24,24,24,18,2,1,24,24,24,24,24,5,2,24,24,24,24,24,6,2,30,30,30,30,6,2,30,30,30,30,6,2,6,12,5,6,7,5,5,3,1,1,16,59
TA_830.fieldContentFormatting     nothing
Regards,
Shiva.

Hi,
As you are using Fixed Length File...use below specified parameters:
TA_830.fieldName:          Names of Fields in teh File
TA_830.fieldFixedLegths: Lenghts as per your file
TA_830.keyFieldValue:    If you use any value as key
TA_830.lastFieldsOptional: YES
TA_830.endSeparator :        'nl'
This will help you out..
Thanks,
Kishore.

Content generation error. [Error: Failed to Export the PDF file.]

Hi;
Everytime i try to update an article within a folio in DPS folio builder i get this error :
Content generation error.
[Error: Failed to Export the PDF file.]
My colleague next to me is running exactly the same set up and doesnt get the error. in fact his update anf sideloading is fast as lightning.
the ONLY difference is that im running v28 tools and he is on v27, however wehave another colleague running v28 and his updates work perfectly.
Any ideas lovely community?
Scott

Hi Bob;
Have tried that one. And again on your suggestion....no luck.
Scott

ORA-02373 error on expdp, table failed to import!!

Hi All,
Would need a little help from you guys. I am trying to take export of an schema, and as the expdp continues, it throws error while exporting one of the tables. I tried looking over the net, but found nothing on this.
I think it is high time to have a say from the pros :) !!
Here goes the error:
=========================================================================
ORA-31693: Table data object "SCHEMA-NAME"."TABLE-NAME" failed to load/unload and is being skipped due to error:
ORA-02354: error in exporting/importing data
ORA-02373: Error parsing insert statement for table "SCHEMA-NAME"."TABLE-NAME".
ORA-00904: : invalid identifier
=========================================================================
The DB Server is 11g.
Any kind of help will be greatly appreciated!
Thanks in Advance.
Noman A.

Hi Kumar,
This is the description of the table:
Name Null Type
ID NOT NULL VARCHAR2(64)
COL-1 VARCHAR2(128)
COL-2 VARCHAR2(128)
COL-3 NOT NULL VARCHAR2(64)
COL-4 NOT NULL VARCHAR2(64)
COL-5 NOT NULL VARCHAR2(64)
COL-6 NOT NULL VARCHAR2(64)
COL-7 VARCHAR2(64)
COL-8 VARCHAR2(255)
COL-9 NOT NULL VARCHAR2(64)
COL-10 NOT NULL TIMESTAMP(6)
COL-11 NOT NULL TIMESTAMP(6)
COL-12 NOT NULL CHAR(1)
COL-13 BLOB()
COL-14 VARCHAR2(512)
COL-15 CHAR(3)
Thanks
Noman A.

PowerPivot Error "Failed to connect to the server. Reason: Unspecified error" when importing other files

I have been getting the error below on a regular basis when attempting to import Excel, Text, or Access files.
I'm running Office 2010 (SP1), and PowerPivot (SP1). After reading a similar thread I reinstalled PowerPivot. It worked until I closed Excel. Now it recuses to allow import or update of these files. I really need it to work. Anyone have an solution or even
something to try - other than uninstalling and reinstalling PowerPiviot everytime I need to import or refresh files?
Thanks,
============================
Error Message:
============================
Unspecified error
Failed to connect to the server. Reason: Unspecified error
============================
Call Stack:
============================
   at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
   at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection)
   at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
   at System.Data.ProviderBase.DbConnectionInternal.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.OleDb.OleDbConnection.Open()
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.InitializeConnectionObject(String connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open(String& connectionIdentifier)
   at Microsoft.AnalysisServices.BackEnd.RelationalDataSourceConnection.Open()
   at Microsoft.AnalysisServices.Common.DataSourceBasic.TestConnection()
   at Microsoft.AnalysisServices.Common.DataSourceBasic.ClickTestConnection(Object progressControl)
============================

Hi San,
What's the version of your PowerPivot? Please refer to the article to check the version of PowerPivot for Excel:
http://powerpivot-info.com/post/89-q-how-can-i-check-what-version-of-powerpivot-for-excel-is-installed-on-my-machine
We can download the latest PowerPivot for Excel version from:
http://www.microsoft.com/en-us/download/details.aspx?id=29074
In addition, please help to collect windows events log information to us for further investigation. If you cann't import Excel, TEXT or Access data into PowerPivot data model, you can try to directly copy your data into it.
Regards,
Elvis Long
TechNet Community Support

Error "Failed to apply XSLT to the content."

Hello all
Good Day!
When i am trying to apply my XSLT script to XML Viewer, I'm getting the given below error :
"Failed to apply XSLT to the content".
Kindly need your help.

Hi Rachna,
According to your description, my understanding is that the error occurred when you applied XSLT script to XML Viewer web part.
This issue may be caused by a recent published security fix for the .NET Framework 3.5.1.
For SharePoint 2010 there is now a re-released fix out to resolve the problem.
See here for more: KB 2872441 - Microsoft SharePoint applications may encounter errors while executing web
parts.
More reference:
http://blogs.technet.com/b/steve_chen/archive/2013/07/31/3587795.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Mail fails to import messages after 10.8.5 update

After the update Mail fails to import my messages and then quits.
First screen says: Welcome to Mail. To use the new features your existing Mail messages need to be imported....
Then when I click continue it says: The import failed. An error occurred during the import. Make sure you have available space in your home folder and try again.
I run mail from inside the container (MacOS folder) and here's what it reads:
Last login: Mon Oct 21 22:39:50 on ttys001
/Applications/Mail.app/Contents/MacOS/Mail ; exit;
Gustavos-MacBook-Air:~ calazans$ /Applications/Mail.app/Contents/MacOS/Mail ; exit;
2013-10-21 23:03:45.907 Mail[778:707] Using V2 Layout
2013-10-21 23:04:43.483 Mail[778:9617] Copy from /Users/calazans/Library/Mail/V2/MailData/Envelope Index to /Users/calazans/Library/Mail/V2/MailData/Envelope Index-26 failed with 10: not an error
logout
[Process completed]
I have already reinstalled combo 10.8.5
I have already booted on recovery console and repaired permissions
I have already installed the Supplemental update 10.8.5
I have created another standard user and inside this new account Mail will work perfectly.
Nothing worked so far. Cherry on the cake : I have a message saying I have a recall on my MBAir SSD drive.
Please advise on how to solve this issue !
Cheers,
ZChef

Intermediate answer: The app launched correctly and the import process has started.
It is taking ages though. Over 3 hours for around 30K messages.
The message count sometimes gets stuck for 20-30 minutes or so and then starts counting again...
There are ~5K messages left to be imported. I'll let you know if it goes ok.
Stay tuned for the next and hopefully last episode.
Cheers,
ZChef

Opatch error: Unable to lock Central Inventory

A) When applying Oracle one-off patches I get this error:
Unable to lock Central Inventory. Stop trying per user-request?
OPatchSession cannot load inventory for the given Oracle Home /oracle/VRQ/102_64. Possible causes are:
   No read or write permission to ORACLE_HOME/.patch_storage
   Central Inventory is locked by another OUI instance
   No read permission to Central Inventory
   The lock file exists in ORACLE_HOME/.patch_storage
   The Oracle Home does not exist in Central Inventory
B) Researching the error, I find thes solutions...
This error may occur because of any one or more of the following reasons:
1. The ORACLE_HOME/.patch_storage may not have read/write permissions. Ensure that you give read/write permissions to this folder and apply the patch again.
2. There may be another Oracle Universal Installer instance running. Stop it and try applying the patch again.
3. The Central Inventory may not have read permission. Ensure that you give read permission to the Central Inventory and apply the patch again.
4. The ORACLE_HOME/.patch_storage directory might be locked. If this directory is locked, you will find a file named patch_locked inside this directory. This may be due to a previously failed installation of a patch. To remove the lock, restore the Oracle home and remove the patch_locked file from the ORACLE_HOME/.patch_storage directory. For more information on restoring the Oracle home, refer to section "Restoring Oracle Homes".
5. The Oracle home may not be present in the Central Inventory. This may be due to a corrupted or lost inventory or the inventory may not be registered in the Central Inventory. For more information, refer to section "Diagnosing and Recovering from Central Inventory Corruption".
C) Everyhing looks okay. What am I missing?
Oracle - 10.2.0.4
OS - AIX 6.1
Multiple database on the server: IPQ and VRQ
Thanks in advance.

Hi,
did you setup a seperate oraInventory for each of both instances as recommended?
Check the contents of oraInst.loc
(On Solaris in /var/opt/oracle, not sure if the same on AIX)
It should point to the Inventory Location.
May be yours is pointing to the other ORACLE_HOME-Inventory.
I tend to use the Inventory location
/oracle/SID/oraInventory, so each ORACLE_HOME has its
own non-mixed inventory.
But you have to keep in mind that oraInst.loc needs to be adjusted,
when you use runInstaller or OPatch !
Or is one ORACLE_HOME a binary copy of another?
A bianary copied ORACLE_HOME is non patchable at all, as far as I know.
In this case (beside this is not a supported SAP configuration), you need to
apply the patches to your copy-Source and do a re-copy.
There is a meatlink note describing how to use a cloned ORACLE_HOME,
but again: This is not supported within SAP!
Hope this helps
Volker

Error, "Failed to load the folio"

So I joined the Creative cloud. Comming from CS5 I must say I really like CS6.
Today I say this youtube video from Terry White in which he explains how to create an app in Indesign. I had installed the latest DPS and Adobe Air from the Adobe download site and it installed fine.
I wanted to try this so I followed him with creating an Folio overlay and tried to preview this with the adobe content viewer on the desktop (macPro OS 10.8.2) and came with the following error ; Error, "Failed to load the folio".
No matter what I try, the error keeps on comming. I tried uninstall the old CS5. Uninstalling Indesign CS6, adobe air. Then rebooted the mac and installed it all over again (except CS5).
The troubleshooting page says this;
Error, "Failed to load the folio"
If you receive this error, it could be due to use of platform invalid characters in the magazine title. For example, the following characters used in the magazine title could cause this error, \ / : * ? " < > |
Rename your magazine title so that none of these characters are used. It's sometimes necessary to test by eliminating any characters that aren't alphanumeric. If changing the magazine name fixes the problem, update the folio in the Folio Builder panel to update the content on the server. Adobe hopes to have these issues fixed in later releases of the product.
If special characters are not the cause of this error, then some other content or attribute could be the cause. Use comparison testing and binary isolation to test sections of your content individually to see if you can isolate the offending element.
But my title is just test.indd.
Even when there is just one image on the page I get the same error when trying to preview.
I also tried to create a folio with the folio builder. The folio gets created but as soon as i try to import an article it says he is done, but the symbol in front of the article is still spinning as if it is not uploading it to the cloud.
But this also happens when I try to do it offline.
I have ran out of solutions to try. Can someone shed some light on this? Thanks.

I get the same problem. The only thing that worked for me was to go to another computer and try it there... And then it works. Not great when you want to teach a class full of students how to do something and only half the class works.

DFSR Error : Error: 9098 (A tombstoned content set deletion has been scheduled)

Hello,
We are getting this error on one of our DFSR shares and am not sure how to get this fixed. We have over 30 different shares replicating and all of them are fine except for one. I have tried to remove the Replication and the namespace and have recreated them
both and continue to get the same error. This is what is in the event logs on the server;
The DFS Replication service stopped replication on the replicated folder at local path E:\SHARE\Sharelocation.
Additional Information:
Error: 9098 (A tombstoned content set deletion has been scheduled)
Additional context of the error:
Replicated Folder Name: Sharelocation
Replicated Folder ID: 9BDA3E5A-8103-481F-84B2-269AE8A3BBC8
Replication Group Name: SHARE
Replication Group ID: C25E73B7-5B65-4299-A1BE-76E723443B02
Member ID: 568CC517-3329-42A4-ABAD-633CB3D1EF2E
If anyone has any suggestion on how to get this working again it would be greatly appreciated.

Here is a short summary of what I did:
Look in Event Viewer and identify all the replication groups/folders that are giving the tombstone error. Once you have them identified, go into DFS Management GUI and completely delete the replication group
associated with that folder. You do not need to delete the DFS Namespace for that folder, just the replication functionality of that namespace folder. If you have other replication groups in your DFS-R that do not get the 9098 errors, then you do not have
to do this for these folders.
Stop DFSR services (you may need to kill the service using the taskkill command if it hangs when it tries to stop).
Give yourself permissions to the hidden System Volume Information folder. If you're account is under the domain admins group, you can simply add the security group.
This folder exists on all servers that is a member of the replication group. In my situation, 2 of the 3 servers didn't show this folder as existing even when I enabled to see hidden folders. If this happens to you,
the server is lying to you that it's not there. It is there. Don't listen to it. My suggestion is to download and use the 7-zip file manager. It will see the folder and will help you set the permissions to
it as well as delete files that are longer than 256 characters, which is an issue if you do the next step from the command line).
Note, after you set the permissions, it might tell you that you still don't have access to that folder. Just close out of 7-zip and open it back up. It should let you in that folder as well as its subfolders.
Once you have access to that folder, go ahead and delete the DFSR folder that resides underneath it. You will want to do this on all servers that has the DFSR role installed and is a member to any replication
groups. You can use the command line command "rmdir", but it fails to delete files/folders that are longer than 256 characters. This is why the 7-zip file manager is a better option to delete the DFSR folder under System Volume Information. However,
there are instances where 7-zip is unable to delete a file or folder. If you run in that scenario, use the rmdir command in an elevated command prompt. Essentially, a combination of these two will eventually clear out everything you need to clear out.
Turn DFSR services back on. This will begin the process of recreating the DFSR hash and virtual tree that you had just deleted.
Recreate the replication group that you want.
On the replication groups that you did not delete, you may get the warning: "The DFS Replication service initialized the replicated folder at local path <path> and is waiting to perform initial
replication. The replicated folder will remain in this state until it has received replicated data, directly or indirectly, from the designated primary member."
If you do, what you need to do is run the command line to set one of the DFSR servers as the primary server for that replication group, and then once set - this
is important - you will have to go in the DFS Management GUI, click on the replication group with the associated warning, select the connections tab, and then right click the the sending member that
you just made as primary and choose "Replicate now..." This will initialize the replication and you will have to do this just that once for it to replicate here on out. You will need to do choose the "Replicate now..." option for each receiving
member that the sending member/primary member server is attached to in that replication group.
Wait about 5-10 minutes and run the dfsrdiag backlog command on each replicationgroup and see if a backlog for replication/sync gets created. Run this command each 5 to 10 minutes to see if the backlog file count value decreases. If it does, it's syncing/replicating.
Don't forget that when testing replication, you cannot create test files via the local path and see if it replicates. You must create it in the DFS Namespace (\domain\folder\share) to see if replication works. Otherwise
you get false negatives and you think replication is still broken. Just an FYI.

Error while updating the content in workflow

Hi,
I'm getting an error while updating the content in workflow thru the checkout option. i.e. contributor checks in the content - reviewer rejects the content - then contributor checks out and modifies the content as per the reviewer's remarks and while checking in the following error occurs
Content Server Request Failed
Unable to check in content item 'HO000128' for workflow. Unable to execute service method 'checkInUpdateRevByID'. (System Error: Runtime error: java.lang.NullPointerException
at intradoc.server.DocServiceHandler.checkInRevByID(DocServiceHandler.java:248)
at intradoc.server.DocServiceHandler.checkInUpdateRevByID(DocServiceHandler.java:240)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.DocServiceHandler.determineWorkflowCheckin(DocServiceHandler.java:3833)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
at intradoc.server.Service.doCodeEx(Service.java:490)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeSubServiceCode(ServiceRequestImplementor.java:1071)
at intradoc.server.Service.executeSubServiceCode(Service.java:3497)
at intradoc.server.ServiceRequestImplementor.executeServiceEx(ServiceRequestImplementor.java:942)
at intradoc.server.Service.executeServiceEx(Service.java:3492)
at intradoc.server.Service.executeService(Service.java:3476)
at intradoc.server.Service.doSubService(Service.java:3465)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
at intradoc.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:279)
at intradoc.common.ClassHelperUtils.executeMethod(ClassHelperUtils.java:264)
at intradoc.server.Service.doCodeEx(Service.java:507)
at intradoc.server.Service.doCode(Service.java:472)
at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
at intradoc.server.Service.doAction(Service.java:452)
at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
at intradoc.server.Service.doActions(Service.java:447)
at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
at intradoc.server.Service.executeActions(Service.java:433)
at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
at intradoc.server.Service.doRequest(Service.java:1707)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:197))
Please help to resolve.
Thanks in advance
Prasad

I also get error while updating the content in workflow thru the checkout option as reviewer. i.e. contributor checks in the content - then reviewer either updates the metadata or checks out and modifies the content and while checking in the following error occurs
Content Server Request Failed
Unable to update the content item information for 'HO000128'.
The content ID must be specified.
Please help to resolve.
Thanks in advance
Prasad

Error in Starting DMS(Content Server)

Dear all,
I get the following error while starting the Content server on unix.
i am unbale to start the server , pls assist.
$ pwd
/home/sapcs/bin
$ apachectl start
ld.so.1: httpd: fatal: libucb.so.1: open failed: No such file or directory
Killed
$
Regards,
Irfan

That simply sounds like the PATH for libucb.so.1 is not maintained in your env variables.
That should fix the problem
Regards
Juan

Error - Failed to import Content Inventory

Similar Messages

Maybe you are looking for