Error"Failed to resolve Convergence Issue"

Hello,
I am working with the Multisim13 and I when I am trying to implement the design as attached shows a window saying ""Failed to resolve Convergence Issue" as shown in attachment.
I found similar threads here
http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/how-to-solve-simulation-error/m-p/838043/highl...
http://forums.ni.com/t5/Circuit-Design-Suite-Multisim/Problem-with-simulation/td-p/2603281/highlight...
Btu were not upto the solution to this.
Thanks.
Solved!
Go to Solution.
Attachments:
Error.jpg ‏327 KB
Design.jpg ‏446 KB

The Sallen-Key lowpass filter has C3 connected at the R5-U2 junction, not as your image shows.
The attached file has the SPICE listing I used. Because I did only AC analysis, none of the DC sources are required. In the listing R2 is the parallel equivalent of your R2 || R3 = 50 kΩ. The op amps are modeled as linear voltage controlled voltage sources with gain of 1 (E1 and E2). R5 was omitted because no current would flow through it. In the corrected Sallen-Key circuit it will be necessary. Resistors Rv1 and Re1 are probably not necessary but assure a DC path to ground from all nodes. I do not have Multisim. These files are modeled with a SPICE 3f5 engine.
The file test 2 stage.txt is the listing for the circuit in your image and test 2 stage SK.txt is modified to represent the Sallen-Key circuit.
The plot below is my analysis of the Sallen-Key version.
Lynn
Attachments:
test 2 stage.txt ‏1 KB
test 2 stage SK.txt ‏1 KB

Similar Messages

Error in NWDI --- ERROR: failed to resolve reference

hello everybody,
i'm working with was 7.01
i configured my NWDI for a Internet Sales project.
In my SLD I added :
SAP J2EE ENGINE
SAP BUILD TOOL
SAP JAVA TECHNOLOGY SERVICES
WEB DYNPRO RUNTIME
when i try to create project from crm/home/shr/ext
But i have this error:
/userOut/Development Component (com.sap.ide.eclipse.component.provider.actions.dc.UsedDCFoundHandlerBase) [Thread[main,5,main]] ERROR: failed to resolve reference "sap.com/com.sap.mw.jco" for DC "sap.com_SAP-SHRWEB_1:sap.com/crm/home/shr/ext":Cannot find compartment of used component: sap.com:com.sap.mw.jco
I already did this step in other pojects and without problems .
I thought to forget something but i don't find missing step
any suggestion?
maybe i forget some SCA file?

HI,
it is not enough to check in the SCA files, but you also have to import them (CMS -- Transport Studio -- Development/Consolidation tabs). Else the corresponding DCs won't be part of the buildspace and so the dependencies cannot be resolved.
The DC sap.com/com.sap.mw.jco is located in the SCA file SAP-JEE. Most likely this SC is still displayed on the Development tab with status "Waiting for import" or "failed".
Best Regards,
Ervin

Hi Since upgrading to Firefox 4.0 I am unable to clear history and get the message "quick time failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas?

Hi I Run Windows 7. Since upgrading to Firefox 4.0 I am unable to "clear history" and get the message "QuickTime failed to initialize". I can delete history when in safe mode with plug-ins disabled. Re-installing quick time fails to resolve the issue. Any ideas or suggestions?

i have that quicktime problem too

TS3694 sirmy iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible

sir my iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible

The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '10,$d' /etc/hosts
You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

HT201328 An unlocked Optus iPhone 4s which accepted a Telstra SIM whilst on IOS6 failed to accept the Testra SIM after an upgrade to IOS7. Many visits to the Optus Shop and the Apple Store have failed to resolve the issue.

An "Out of Contract" Optus iPhone 4S accepted and worked perfectly with a Telstra SIM.
Following an upgrade to IOS7.0.4 the iPhone 4S will no longer work with the Telsta SIM.
The following error message is recieved
“The SIM card inserted in this iPhone does not appear to be supported”
Apple Store Genius Bar on checking the 4S iphone in the Apple database indicate that the Service Details Policy is assigned to “Australia Optus (Singtel)” and only Optus can unlock it.
Optus indicate that teh iPhone is unlocked and I have a stalmate as noone is able to advise how to rectify the issue.
A checkof teh Telstra SIM was undertaken on another IOS6 Optus 4S iPhone and it functioned correctly.
I am aware others have had this issue as there is a reference to it on the Optus Support Community.
It means that an international SIM cannot be used in teh iPhone until the issue is resolved
I am of teh opinion teh it is an IOS7 software upgrade issue not a problem with teh harware or the carrier
I await any feedback
Thank you
wp72rgn49

You're welcome.
Since the iPhone is carrier locked with Optus, the only way it could work with another carrier's SIM card and service under iOS 6 was by hacking/jailbreaking the iPhone to unlock it. Installing an iOS update on an iPhone that was hacked to be unlocked re-locks the iPhone to the carrier it was sold as carrier locked with when new.
All Optus carrier locked iPhones are not unlocked with iOS 7.
Only the carrier an iPhone was sold as carrier locked with can officially unlock the iPhone, or send the unlock request to Apple on the owner's behalf. Since Apple's database shows the iPhone as being locked with Optus, Optus must send the unlock request to Apple for the iPhone. When the unlock process is ready, the unlocking is done with iTunes on your computer. This is the only way a carrier locked iPhone can be officially unlocked.

Load Indictor errors - Has anyone resolve this issues

I made the modifications suggested, but the database will not open because of the error encountered in the alert log file. When trying to start the 8.0.5 database using 8.1.5 executables and libaries, I get the following error messages in the alter log file.
PMON started with pid=2
Load Indicator not support by OS!
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
-timestamp-
alter database mount
-timestamp-
Errors in ckpt_2057.trc:
oerr-00600 internal error, arguments: [2114],[13],[752],[],[],[],[]
RECO start with pid=7
-timestamp-
CKPT:terminating instance due to error 600
Instance terminated by CKPT, pid=2057
Is this error due to the Load indicator?
pmon_2051.trc contains
Load indicator not support by OS!
Any help is appreciated in trying to mount and open this database so that I can migrate to 8.1.5.
I have already applied the 8.1.5.0.2 patch to the software.
[email protected]
null

I tried to reply in the email but some issue
trying to open the link. reply here the best times to
chat and I will go through forum here my phone is 48078
28079 and we can remote if given a day notice
drgm

Failed to resolve incompatibility between price lists

Hej,
I have several price list but in one when I add item I get the following error
Failed to resolve incompatibility between price lists(item) Duplicate price list lines( i.e. equal precedence): US dc and US dc.
I have checked the item is not duplicated anywhere in pricing, any idea why getting this error message?
thanks and kind reagrds,
/Z

Check that if the same item is there in terms of category price list line and that has same precedence.

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

I am using itunes 10 and trying to consolidate my files. I keep getting the error "Copying files failed. The file name was invalid or too long". How can I indentify what file is causing this problem or resolve this issue?

BUMP
Yes, I just get that message. I don't see how I could investigate this problem.
I didn't mention that this happened when I was consolidating my library, not copying files to another computer.
In other words, I'm using a "normal" itunes procedure, itunes won't complete it, and won't tell me exactly why or how to figure out how to fix it...
Is there at least some easy way to tell which files were successfully copied to my itunes music folder so I can work on moving the uncopied files?
Can anybody help me?

HT4913 How do I resolve this issue when I try to download iTunes. I receive this error message " iTunes64Setup.exe is corrupt or invalid"

How do I resolve this issue when I try to download iTunes on my laptop? It fails because of this error message " iTunes64Setup.exe is corrupt or invalid"

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Call to Driver Package Error - Nine Possible Solutions that have Resolved this Issue!

Hello everyone I've decided to write up this guide to discuss and troubleshoot the “Call to Driver Package Error”.
What is it ? What causes it?
This issue normally occurs when a specific driver, that is being called, cannot be called. Sometimes, a 1627 or 1603 error is referenced in the error.
- If a 1603 error is referenced, this indicates that an ERROR_INSTALL_FAILURE has occurred, meaning a component of the installation failed. This is normally accompanied when another form of installation occurs.
- If a 1627 error is referenced, this indicates that an ERROR_FUNCTION_FAILURE has occurred, meaning a function at a specific moment has failed, and the installation cannot continue.
Typically, these numbers do not mean a whole lot. However, for an advanced user, these numbers might mean a little bit more.
An example?
"Call to driver package install returned the error 1603 for Pkg C:/ProgramFiles\HP\HP officejet pro 8600\driverstore\ng scan driver\HPWia_OJ8600.INF"
This is the most recent error message I've witnessed. If you break it down, you will notice that “HPWia_OJ8600.INF” is the installation file (INF) that has failed. WIA (Windows Image Acquisition) is crucial for scanning, and the printer installs this file to enable scanning features.
How can you troubleshoot this error?
This is the main portion of the post. I am going to suggest a significant list of troubleshooting that you can attempt. There are nine solutions which have resolved the issue in different situations, all of which I personally worked with. I'm hoping that these solutions will work for you if you have to face this error.
*Please note that some of this troubleshooting is a little complicated. If a mistake is made, you may have to reinstall the operating system. However, the final troubleshooting step will require you to do this. You should make sure all of your data is backed up before troubleshooting.
Backing Up Your Files (Windows 8)
Backing Up Your Files (Windows 7)
How to Back Up Your Files (Windows Vista or XP)
You should also backup the Registry. There are some Registry-editing steps in the troubleshooting I provide.
Backing Up, Editing, and Restoring the Windows Registry (Windows 8)
Backing Up, Editing, and Restoring the Windows Registry (Windows 7)
Backing Up, Editing, and Restoring the Windows Registry (Windows 98, ME, and XP)
*After each step is attempted, you can try installing the printer software. If it fails, please uninstall the software before proceeding. This HP document will explain how to do it:
1. The first step is performing a Clean Boot. I've resolved this issue in the past by performing this simple step before installing the software. A Clean Boot will turn off third-party programs and services that could be blocking the software from working correctly. For more information on how to do this, please look at this Microsoft document:
How to perform a clean boot in Windows
2. Next, make sure the Windows Installer it turned on and started. If it not, the installation may not complete. To do this, hold down the “Windows” and “R” key on the keyboard, which will open the Run box. In that box, type “services.msc” (without the quotes) and hit Enter.
Now scroll down to the Windows Installer. If it is checked stopped, or not started, right-click on it and select “Start”.
3. Next, I would suggest completing all Windows Updates:
a) Open "Windows Update" in Control Panel.
b) Click "Settings", and then click "Install optional updates".
c) Next, click "Check for updates".
This will ensure that all updates are found and installed. Once they are installed, see whether or not the error returns.
4. If the issue is not resolved at this point, I would like to check the system for obvious corruption with an SFC scan. SFC stands for System File Checker, and it scans and attempts to restore corrupted Windows files.
To do this, open Command Prompt as Administrator. Type in this command and hit Enter afterward: sfc
/scannow
Write down the results and restart computer after this completes.
5. Creating a new Administrator account is a workaround to the issue. If the error does not appear on other accounts, this proves that whatever is causing the error is account-exclusive. I'm going to suggest you unlock the computer's built-in Administrator account.
To do this, open Command Prompt as Administrator, again. Then type in this command and hit Enter afterward: net user administrator /active:yes
6. The next step involves editing permissions in the Registry. In the Registry, please review the instructions below to apply full permissions to the following key: HKEY_LOCAL_MACHINE
a) Right-click on the key that you need to edit and/or delete (HKEY_LOCAL_MACHINE). Click on "permissions..."
b) Click "Add" in that Window that appears.
c) There will be an empty box under "Enter the object names to select". Type "Administrator" (without the quotes), then click on "Check Names".
d) An Administrator name will appear, click "Ok" when it does.
e) You should be able to select (click) the Administrator profile under "Group or user names". Once clicked, click on "Advanced".
f) Click on the "Owner" tab.
g) Click on the Administrator profile, then put the check-mark in "Replace owner on subcontainers and objects".
h) Go back to the "Permissions" tab, and ensure the Administrator profile is selected.
i) In the "Permissions" tab, put a check-mark in every box available. The boxes will likely be indicated by "Include inheritable permissions from this object's parent" and "Replace all child object permissions with inheritable permissions from this object".
j) Next, click "Edit". Put a check-mark in "Full Control" under Allow. Click Ok. Now, click Apply (you may receive a Window security message, just click "Yes"), then Ok.
k) Exit the Registry, then restart the computer, and launch the Administrator account.
7. The next step is to re-register the Windows Installer, and other dynamic library links (.DLL). Doing this will reference certain components that are required to complete the installation. Open Command Prompt as Administrator, then type each command and hit Enter after each one:
MSIEXEC /UNREGISTER
MSIEXEC /REGSERVER
REGSVR32 MSI.DLL
REGSVR32 ATL.DLL
REGSVR32 SOFTPUB.DLL
REGSVR32 WINTRUST.DLL
REGSVR32 INITPKI.DLL
REGSVR32 DSSENH.DLL
REGSVR32 RSAENH.DLL
REGSVR32 GPKCSP.DLL
REGSVR32 SCCBASE.DLL
REGSVR32 SLBCSP.DLL
REGSVR32 MSSIP32.DLL
REGSVR32 CRYPTDLG.DLL
8. There are certain DLL files that can interfere with the installation, and they should be deleted. Go to C:\Windows\System32
Delete the following files:
HPZipm12.dll
HPZinw12.dll
9. Before reinstalling the operating system, you can try restoring it. This will allow you to return the computer to a point where the printer was working.
*You should only do this if the software worked in the recent past.
What is System Restore? - For Windows 7 and Vista
How to refresh, reset, or restore your PC - For Windows 8 and 8.1
What if these nine solutions do not work?
Finally, you will need to reinstall the operating system if the issue is not resolved by this point. However, I can promise that this will resolve the issue. Here is a generic document on reinstalling the operating system:
Overview of Recovering the OS or Reinstalling the Operating System
And that's everything. Thanks for reading! - Mario
I worked on behalf of HP.

No error messages are given. It will either freeze while saying "Accessing iTunes Store," or without saying anything at all.
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

IPV6 issues during the installation? "error: failed retrieving file"

Hi!
I currently try to install Arch on my Notebook using the Newbie Guide from the German Arch Wiki. Everything seemed to work fine until I got to the point of installing the base system using
pacstrap /mnt base base-devel wpa_supplicant
. The downloading process fails and returns about the same error message for every mirror:
error: failed retrieving file 'core.db' from MIRRORNAME : Resolving timed out after XY milliseconds
I already tried to use different mirrors, but none of them worked. I tried to reach them on another machine via the browser and could access them, so they're definitly up. It therefore could be my internet connection, but I'm connected via an ethernet cable and can ping e.g. google.com or archlinux.org without any problems. I looked up the issue on different forums and almost everyone said that it's an issue caused by ipv6; I tried different workarounds, but none of them worked since most of them were used on an Arch system that was already installed but had problems with pacman. Due to the fact that I'm encountering this problem on a CD that I try to install Arch with, most of the files I'm supposed to edit to disable ipv6 aren't there (yet?) - and the other workarounds just didn't work. I really want to install Arch on my system, but can't continue with the installation when pacman can't reach the mirrors.
I therefore need your help to solve this; like I said, it's probably an issue with ipv6, but I just can't find out how to disable it on my installation medium (I burned the archlinux-2014.11.01-dual.iso on it, if that matters).
Last edited by Nex (2014-11-15 15:05:06)

run ping6 -c 4 google.com and post the output.
alss post the output of :
ip addr
ip route -4
ip route -6
Last edited by Lone_Wolf (2014-11-15 16:37:13)

SSTP VPN fails with Error 0x80092013 when certificate is issued by an Enterprise CA

I have spent several days trying to configure an SSTP VPN in an environment with a 2008R2 Enterprise CA server without much luck. I have been using the example found at http://technet.microsoft.com/en-us/library/cc731352(v=ws.10).aspx which
works very well as long as you configure the CA Extensions tab with an http CRL Distribution point that is included in the CRLs and CDP extension of issued certificates and is available to the client prior to VPN connection.
Basically my lab environment is as follows:
Separate 2008R2 domain controller, Single 2008R2 Enterprise CA / RRAS server with one nic. I know the instructions that I mentioned above use an RRAS server with 2 nics but I don't want my RRAS server serving as a router. I have an external hardware firewall
that port forwards port 443 to my single nic in my RRAS server and this entire configuration works fine as long as I am using a standard CA configuration. The RRAS was configured using the custom option and only VPN was chosen. Since my RRAS server is behind
a NAT router, the dns name my external client uses to connect is different than the internal name of my RRAS server.
In the example above, a Windows 2008R2 CA server is configured as a standalone non-enterprise root CA. As long as I stick with a standard CA, I have no problem and everything works.
My problem is that if I configure my Windows Server 2008R2 Enterprise server as an Enterprise Root CA, My Windows 7 client always gets an "Error 0x80092013 The revocation function was unable to check revocation because the revocation server was offline."
I'm not certain, but I think the problem is with the way that I request the certificate for my RRAS server. When I configure a standalone standard root CA and use the web enrollment page and use an Advanced Certificate Request, I get a page that I can use
to fill out the external dns name that I use to connect to SSTP, choose a Server Authentication Certificate, choose to mark keys as exportable and submit my request. Once I install this key in the Certificates (local computer) / Personal / Certificates
store, everything works and my client can connect as long as I have installed the root CA certificate on my client.
When I install my CA as an Enterprise Root CA server, everything changes. I no longer have the same options to install a custom certificate. Instead of getting the same page as I do with a standard CA, I get my choice of Certificate Templates. Prior to this,
I have duplicated the Computer template in the CA authority and configured the subject name to "supply in request" and configured my CA to issue it. I have tried issuing my RRAS SSTP certificate using the web enrollment and I have also tried using the certificates
plugins in mmc to request custom certificates and tried using an alternative subject name, filling out the DNS option with my external dns name.
When it is all said and done, I end up with an RRAS SSTP certificate that has CRL Distribution Points defined as URL=http://www.mywebsite/CertEnroll/myCA.crl and it is available to my client or anyone. I have compared the certificate issued by an Enterprise
CA vs the Standard CA and I find little difference in the two. I also know that I can reach this RRAS SSTP certificate from my client by going to https://myexternaladdress.mydomain.com/sra_{BA195980-CD49-458b-9E23-C84EE0ADCD75}/and
I can view the padlock in IE and view my internal RRAS certificate. The CRL Distribution point looks no different when I have a standard vs an Enterprise CA but my client always fails with the Error 0x80092013 when I have issued the RRAS SSTP certificate
with the Enterprise CA.
I have probably re-setup this lab about 20 times and am getting very familiar with getting it set up quickly and working with the standard CA but I want to use an Enterprise CA environment.
What am I missing? How can I make this work with an Enterprise CA? How can I troubleshoot this?
Thanks,
Rod
Rod Miller

Thanks for your reply. I did read the article and addressed that issue in the first part of my previous post. I don't think that the website where I am hosting my CRL has directory browsing permissions or that I have the ability to set them but the
point of my question was everything works using that same public website when I use a standard CA to create my certificate but does NOT work when I create the certificate using an Enterprise CA.
Rod
Rod Miller

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

When trying to upload a document or attach a document in an email Firefox gives me an error "Failed to load CTDFMRES.dll" and stops responding, I have no issues in any other browsers. And I am using Firefox 4, Fixes???

You don't have to disable any addons or extentions!!!You guys are not going to believe this I figured out the problem it's really dumb...ok here goes the attachment uploader loads seperate so I got to thinking it's a popup so I went to options content and under block pop ups there is an option exceptions click on that and in the box type firefox.com and hit allow pow its fixed!!!!! :-)

While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.

While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.

Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour.

Error in ST05 - trace record pair error block. How to resolve/tackle issue?

Hello,
Someone approached me last week in asking me how to resolve an issue in ST05. Basically I used the transaction to filter "inclusive VBPA".
The error is ....
Internal error - trace record pair error block 8 link no. 0
Message no. 0S 026
Diagnosis
    Each SQL statement is described by two SQL trace records that have the
    same link number. In this case, there are at least three records with the
    same link number.
    The system outputs the number of the block in which the third SQL trace
    record was found, as well as the link number of the records.
System response
    Program processing continues after the message is displayed. The system
    processes all of the trace records. You should assume, however, that the
    SQL trace in this case is not displayed correctly.
Procedure
You cannot correct this error yourself. If you can reproduce the error,
contact the SAP Hotline.
SQL trace list editing terminated after 6 errors
While using the trace I am executing the program that selects VBPA once and, I am assuming, as it goes through the BAPI BAPI_SALESORDER_CHANGE used to unblock a delivery block. I am guessing the problem or source is from the BAPI but do you guys have other insights in what is causing this issue?
Thanks again, hope to hear from you soon, and good day.

Our ERP LIVE Production around 11am all users encountered cannot generate print record from the submit new request. see below errorFor production issues, please log a SR.
ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.
ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.
ORA-00060: Deadlock detected. More info in file /u/oracle/PROD/db/tech_st/11.1.0/admin/PROD_tailindb/diag/rdbms/prod/PROD/trace/PROD_ora_4026.trc.Please see these docs.
OERR: ORA 60 "deadlock detected while waiting for resource" [ID 18251.1]
What to do with "ORA-60 Deadlock Detected" Errors [ID 62365.1]
Thanks,
Hussein

Error"Failed to resolve Convergence Issue"

Similar Messages

Maybe you are looking for