Error for output tax code:Tax code I4 may only contain one assignment line.
Hi
While posting customer invoice with output tax code, I am getting following error.
Tax code I4 may only contain one assignment line.
Please help me resolve.
Regards
Rekha
There are quite some answered questions in this forum for this issue.
Here is one.
Error in Sample document (Message no. FF731)
Also, please search the forum with the following search key words.
Tax AND code AND may AND only AND contain AND one AND assignment AND line
Make sure you select all posts, not just the past 90 days (the default option), and you will see quite some hits.
Similar Messages
-
Tax code S2 may only contain one assignment line-Input Service tax
There is one interim service tax input code (for normal services) - S1. Final service tax code S2 is created assigned to S1 as target tax code.
Entry passed:
Exp A/c.. Dr 500000
Service Tax Basic (deferred) 50000
Service Tax ECS (deferred) 1000
Service Tax SHEC (deferred) 500
To Vendor A/c 551500
But when i execute the program i can see three line items (for basic, interim and SHEC)
But when i run the session, it gives error:
Tax code S2 may only contain one assignment line.
I AM UNABLE TO UNDERSTAND, WHY ITS GIVING ERROR FOR Input SERVICE TAX TRANSFER
But for output Service tax Interim-I1 and final Service tax code-T1- means in case of customer, the deffered tax transfer cycle is working fine.......
regardsHello Pari,
Could you please share the solution?
I am facing same error.
While executing programme RFUMSV50 system is generating batch but no postings are taking place while processing the same.
however while executing RFUMSV25 system is generating batch inputs and while executing the programme it gives me similar error that you have faced. i.e Tax code 8S may only contain one assignment line.
Please tell me the solution.
Rahul Kulkarni. -
Tax code S7 may only contain one assignment line (Message no. FF731)
Dear All,
I am getting above error while processing Batch session genrated by S_AC0_52000644.
I have searched SDN and found the similar kind of error but that message was related to Tax Procedure TAXINN where as we are useing tax procudure TAXINJ. Any how I have checked the configs for posting error given in Note 921634, all the mentioned setting are available still I am getting same errror.
Please suggest.
Thanks & Regards
Krishnna chaitanyaHi,
This error is due to your configuration setting for RFUMSV50(Deferred Service tax).
you need to assign routing 166 to your tax procedure for Service Tax. Once you do that you will not get this error.
Regards,
SAPFICO -
Revision: 20754
Revision: 20754
Author: [email protected]
Date: 2011-03-10 03:36:05 -0800 (Thu, 10 Mar 2011)
Log Message:
My latest EndpointPushNotifier change changed the style of the code quite a bit (sorry for that, it was my IDE settings getting in the loop here) I only changed one char line 389.
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/client/EndpointPushNotifier.javaI seem to have fixed it by putting <div class="clearfloat"></div> after the navigation bar?
-
Cannot submit app update - "Error The submission can only contain one appx or one appxbundle."
I'm trying to submit my app update to the store and I get the following error:
Error
The submission can only contain one appx or one appxbundle.
So I thought I should maybe utilize the "Delete" option to allow me to submit an updated appx or appxbundle (since these are the only file types that App Studio allows us to build). However, when I do, I get the
following message:
Can't delete this package
You must have at least one 8.1 package in your submission.
... So I'm basically stuck. Can't delete to upload a new one. Can't upload a new one because there's one already there. It would be nice if you could automatically sunset the old appx/appxbundle package in favor of the new
one.
Update: Solved! Solution below.Since this is still an issue, shouldn't it be escalated for a fix so that the page works on any modern browser?
I see two independent problems here:
- Hitting Delete should work, not bash the user with a "You must have at least one 8.1 package in your submission." message (i.e. allow the developer to delete and then add a new file, if so desired). After all, when making the initial submission
we are in the same situation (no file yet), so it can't be that bad, as long as this is checked for at a later stage.
- Show that Replace button which seems to be hiding! If it is a Silverlight issue, why require Silverlight in the first place?
P.S.: I am experiencing this with IE (no Replace button, Windows 8.1 x64 and latest updates). -
BAPI_GOODSMVT_CREATE - error for movement type 343 (movement code - 04)
Hi Gurus,
I am using BAPI_GOODSMVT_CREATE for doing transfer posting MB1B.
I need to do transfer posting using movement type - 343 "Blocked to Unrestricted stock"
Movement type - 343
GOODSMVT_CODE - 04 (transfer posintg)
I am getting error message -
E /CWM/MM 001 Transfer the parallel entry quantity/entry unit of measure
Help me with some pointers.
Thanks,
MadanRajesh,
Here is my code for line items:
MATERIAL 100001374
PLANT 1AAE
STGE_LOC B100
BATCH 0111331309
MOVE_TYPE 343
ENTRY_QNT 10.000
ENTRY_UOM EA
Let me know should I need to fill any other fields.
Thanks,
Madan -
Need to isolate error with output with valid input (code included)
Hey guys, this code will be a bit lengthy as I am posting from two separate Java files: Rectangle.java and RectangleTest.java - Basically I am stumped as to why even valid input keeps resulting in this message: System.out.println("\nThis is a SQUARE, not a Rectangle...Quiting...\n"); . Why am I getting this output? I seriously cant figure this out, and really what I am trying to do is take user input for four sets of coordinates, store them, do some simple math with them to determine if the object they form is a Rectangle and not a square. In the long run I am probably doing the whole thing wrong.
Here is the Rectangle.java code:
public class Rectangle {
private int x1,x2,x3,x4,y1,y2,y3,y4;
private int length;
private int width;
public Rectangle ()
this.x1 = 0;
this.y1 = 0;
this.x2 = 0;
this.y2 = 0;
this.x3 = 0;
this.y3 = 0;
this.x4 = 0;
this.y4 = 0;
public Rectangle ( int x1, int x2, int x3, int x4, int y1, int y2, int y3, int y4)
this.setX1(x1);
this.setX2(x2);
this.setX3(x3);
this.setX4(x4);
this.setY1(y1);
this.setY2(y2);
this.setY3(y3);
this.setY4(y4);
// First set x1, y1
if (x1 > 0 && x1 < 20)
setX1(x1);
else
this.x1 = 0;
if (y1 > 0 && y1 < 20)
setY1(y1);
else
this.y1 = 0;
// Second set x2,y2
if (x2 > 0 && x2 < 20)
setX2(x2);
else
this.x2 = 0;
if (y2 > 0 && y2 < 20)
setY2(y2);
else
this.y2 = 0;
// Third set x3,y3
if (x3 > 0 && x3 < 20)
setX3(x3);
else
this.x3 = 0;
if (y3 > 0 && y3 < 20)
setY3(y3);
else
this.y3 = 0;
// Last set x4,y4
if (x4 > 0 && x4 < 20)
setX4(x4);
else
this.x4 = 0;
if (y4 > 0 && y4 < 20)
setY4(y4);
else
this.y4 = 0;
}// exit constructor
// Enter methods
public int getArea()
return length * width;
public int getPerimeter()
return (2*length) + (2*width);
public boolean isSquare()
if (length == width)
return true;
else return false;
public boolean isRectangle()
if (length != width && length > width)
return true;
else return false;
// Enter Setters and Getters
public void setLength(){
this.length = ((x2-x1)^2 + (y2-y1)^2);
public int getLength(){
return length;
public void setWidth(){
this.width = ((x4-x1)^2 + (y4-y1)^2);
public int getWidth(){
return width;
public void setX1(int x1) {
this.x1 = x1;
public int getX1() {
return x1;
public void setX2(int x2) {
this.x2 = x2;
public int getX2() {
return x2;
public void setX3(int x3) {
this.x3 = x3;
public int getX3() {
return x3;
public void setX4(int x4) {
this.x4 = x4;
public int getX4() {
return x4;
public void setY1(int y1) {
this.y1 = y1;
public int getY1() {
return y1;
public void setY2(int y2) {
this.y2 = y2;
public int getY2() {
return y2;
public void setY3(int y3) {
this.y3 = y3;
public int getY3() {
return y3;
public void setY4(int y4) {
this.y4 = y4;
public int getY4() {
return y4;
Code for RectangleTest.java:
import java.util.Scanner;
public class RectangleTest {
public static void main(String[] args)
int choice;
int xFirst, xSecond, xThird, xFourth, yFirst, ySecond, yThird, yFourth;
Scanner input = new Scanner(System.in); // Scans or reads the inputs from the keyboard of user
do {
System.out.print("\nTo START Enter '1'; ");
System.out.print("\nOr to QUIT Enter '0'; ");
choice = input.nextInt();
if (choice == 1)
// First Set
System.out.println("\nPlease enter the FIRST set of Coordinates\n");
System.out.print("Enter X1: ");
xFirst = input.nextInt();
System.out.print("Enter Y1: ");
yFirst = input.nextInt();
// Second Set
System.out.println("\nPlease enter the SECOND set of Coordinates\n");
System.out.print("Enter X2: ");
xSecond = input.nextInt();
System.out.print("Enter Y2: ");
ySecond = input.nextInt();
// Third Set
System.out.println("\nPlease enter the THIRD set of Coordinates\n");
System.out.print("Enter X3: ");
xThird = input.nextInt();
System.out.print("Enter Y3: ");
yThird = input.nextInt();
// Third Set
System.out.println("\nPlease enter the FOURTH set of Coordinates\n");
System.out.print("Enter X4: ");
xFourth = input.nextInt();
System.out.print("Enter Y4: ");
yFourth = input.nextInt();
// Instantiating the Rectangle class to test it
Rectangle rectangle1 = new Rectangle(xFirst, xSecond, xThird, xFourth, yFirst, ySecond, yThird, yFourth);
int lengthRectangle1 = rectangle1.getLength();
int widthRectangle1 = rectangle1.getWidth();
int area = rectangle1.getArea();
int periRect = rectangle1.getPerimeter();
// Check Shape type
if (rectangle1.isRectangle())
System.out.println("\nThis is a valid Rectangle\n");
else if (rectangle1.isSquare());
System.out.println("\nThis is a SQUARE, not a Rectangle...Quiting...\n");
}while (choice != 0);
System.out.println("Bye for now!");
}NPP83 wrote:
Essentially, I am trying to achieve the following:
1. Store the Cartesian coordinates for the four corners of a Rectangle
2. Verify that the supplied coordinates (by the user) do infact make a Rectangle and not a Square.
Since I don't physically have a Length and Width, but just points, I have to use a little math to create a Length and Width and I came up with ((x2-x1)^2 + (y2-y1)^2) to find the length of one side. I thought I would store this as the way to set the Length/Width (setLength & setWidth), but I havent been able to find a way to bridge the user's input in the main() method of the test program to use the values in this formula. Even then, I am not sure if this simple step would at all help validate the object created by the four sets of points is a Rectangle. I thought that a Rectangle might be created by simply by deductive math where if the Length > Width or Length < Width and Width != Length then I would have a what I was looking for.One side is (X2 - X1) the next side is (Y3 - Y2) the 3rd and 4th sides are: (X4 - X3) and (Y4 - Y1).
Edited by: morgalr on Mar 29, 2010 3:40 PM -- the following comment added:
You should check out getBounds, it may be what you are looking for. -
Error for visual ADF from xml code behind
Hello all:
I am a freshman to use Jdeveloper 10.1.3.1.
When I was using faces-config.xml to create JSP and JSPX page, the ADF component control suddenly diplayed abnormally, Only to show the tagbox like form, html, head, body and so on in Design view, sometimes even nothing to display,.But when I restart jdeveloper, some page would be OK again, others still can not be show normally. I checked the code behind the page.there is nothing wrong, because these codes are all auto-created.
Thanks to advance
Bonnie([email protected])I have solved this problem.
Because I added a filter into web.xml. It seemed that this would be complied while in design model. After I removed it, it's OK! -
In LIVECYCLE DESIGNER how do I code a submit button to only submit one page of a multipage PDF
I have a multipage PDF I've designed in Livecycle and have print and submit buttons on each unique form in the document. I am able to create code (which I've copied from someplace) that allows only one page to print but when I click the submit button it wants to submit the entire document. PS - I created the Submit from the blank button and have it set to submit PDF not XML.
I don't think you can submit just a page of your PDF like you printed just a page. The difference is that when you print, the PDF becomes dots on paper, while when you submit a PDF it must remain completely intact to be machine readable, especially since the forms on a LiveCycle (XFA) document can have complex dependencies between pages.
-
Recurring rendering error "an output module failed. The file may be damaged or corrupted"
From today onwards I've been getting this error whenever I'm exporting to Quicktime mov (at least H264 and DXV). I've been reading a lot about it and it seems to be an ongoing issue, related to the QT32 server (whatever that is). I haven't been able to find a satisfactory solution yet. One thing's for sure, it's messing up my workflow.
Some additional info:
System: Mac
OS: 10.9.2 (Mavericks)
Adobe: Adobe CC
Quicktime: Version 10.3
One other weird thing is, whenever I quit and restart AE, it renders fine once. After that it breaks.
Hope you can help!AE version: CC 12.2.1.5
Updates: Yes, everything is updated to the last version.
Mac OS: 10.9.2 (Mavericks)
Hardware: Processor: 2.8 Ghz Intel Core 2 duo
Memory: 8Gb 1067 MHz DDR3
Graphics: NVIDIA GeForce 9600M GT 512Mb
#Cores: 2
Harddisk: Samsung 840 EVO 500GB
External HD's: None
Drivers: CUDA: Installed the most recent version 3 weeks ago, tried finding the
version.. Sorry I'm a real nOOb when it comes to this stuff
3dparty hardware: None
Source footage: See previous post
Error message:
I can replicate the error again and again. I can predict that it will work fine the first render, second time it breaks.
I've done this a million times in CS5, and it worked fine in the CC trial. As soon as I went to 'full', it broke.
I REALLY hope this is sufficient information!
Tnx for taking the time to help me out -
I want to be able to use only one instance of Pod Farm for my guitars, and have all of my guitar tracks run through it while I'm recording.
What he said. Or here is a similar approach with a picture.
1. Press the SEND button on every stereo (or mono) guitar track you want to send through the effect. Then select a free bus.
2. Make sure you turn up the amount of send (in db). Holding alt while leftclicking on this circle sets the send level to 0 db wich is good.
3. Open the mixer (Cmd+2). Please see that I here have turned the output off from the stereo guitar track. That way the only output will be the BUS, in your case the AmpTrack bus where all your guitars will pass through. If you want both the original guitar sound AND the Ampfarm effect then just set all outputs on your guitar tracks to Stereo Out, like the AmpF Bus track is set in my picture.
4. Insert your AmpFarm plugin here. I don´t have that plug so I inserted Waves Renes Axe for demo purpose.
Adjust the volume/effect of every guitartrack by turning the circle input shown as 2. in my picture.
I now see that you mentioned Pod Farm, not AmpFarm. But I guess it´s the same trick.
Have fun.
Heyclown.
Message was edited by: WizardSongs - Typhoos -
How do I sign out of my apple i.d. Using my iPad then sign back n using my other apple I.d? I can't find the option anywhere on my iPad to do this. Anyone know how?
What ID do you want to change? To change your iTunes ID, go to Settings>iTunes & App Stores, tap the ID, sign out, then sign back in with the new ID. To change the ID for iMessage, do the same thing in Settings>Messages>Send & Receive. To change the ID for FaceTime, do the same thing in Settings>FaceTime. To change the ID for iCloud, go to Settings>iCloud, tap Delete Account, then sign back in with the ID you want to use.
-
I've been charged for 2 in app purchases but I've only received one on Pixel People?
on Pixel People I made an in app purchase for a vip spin, but it asked me to accept terms and conditions and I had to go back into the app, I think clicked to spin again and actually got a spin, but I got charged for two, I don't know who to contact about this.
Thank you for your time!Contact iTunes Store support. Use the "contact us" link on the lower right hand corner of this page
-
Pls help me
Okay, I have noticed every single highlighted word is a link direct to Ebay. Nowhere else. I wonder how much Ebay paid Apple to do this. Random words scattered throughout the internet, but it seems most prevalent on internet forums. I am feeling pretty annoyed that my iPad has turned itself into a portable advertising campaign for Ebay. The highlighting of random numbers or phrases for maps or as phone numbers continues.
-
Printing error with t-code j1inmis: Can not find PDL type for output device
Hi,
When using tr.code j1inmis,when we seeing the print preview iam getting below error.
The error with my system show the details as follow :
Cannot find PDL type for output device LP01.
My system is only abap stack.Guide me for the same how to resolve this.
ThankuHi,
When i submit the test through URL its working fine(http://192.17.0.12/AdobeDocumentServices/Config).In SM59 Both sides are working.
When I check The Test : FP_TEST_00 iam getting below error
ADS: com.adobe.ProcessingException: com.adobe.Processin(200101)
But
When I check The Test : FP_PDF_TEST_00 its working fine.
And When I check this test : FP_CHECK_DESTINATION_SERVICE without destination its working fine.
When i check with destination iam getting error : SYSTEM ERROR:com.adobe.ProcessingException:Problem accessing data from Destination:dest:FP_ICF_DATA_SMN//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE.
Guide me for the same two tests are working fine other two are getting error,guide me for the same to solve this,appreciate ur help.
Thanku
Maybe you are looking for
-
Hello! Here's some information that might be familiar, I don't know: I got my Mac late 2014 Yosemite, 13-inch, Retina 120 GB, 8 GB RAM This would be the second time that I'm 'uninstalling' Spotify. The first time was a few months back, when it wouldn
-
How do I change permissions on a volume after migration using OS X installer?
On attached volumes I cannot save files. I recently used OS X migration assistant to move to my new iMac but the volumes that I used on the old system will not allow me to save to them (the os says it's a permissions problem). Short of renaming the n
-
Firefox keeps history for more than the designated time period and opens automatically
So i have two problems 1)my firefox history options is set to only remember last 7 days but it doesn't delete after 7 days and adds this month and previous month.If i delete only this month the entire history is deleted. 2)lately whenever my laptop g
-
Having trouble adding music to slide shows
I've always been able to add specific songs from itunes to a iphoto slide show. Now when I go to add music the viewer just lists my playslists but won't open to show songs in the playlist. My only option is to play the entire playlist. I am using Itu
-
Cannot change mobile account settings, connected to Windows AD
Hi! My Mac Book Pro, 15", 2-3 months old, Lion, 8GB RAM. I have also VMware Fusion 4.x installed. I also still have my old MBP 13", 2,5 years old with almost the same config, but VMware 3.x. Now to the strange thing. On the MBP 13" I CAN change setti