Error - G/L account 407350 requires a valid tax codeu201D.

I am getting error "G/L account 407350 requires a valid tax codeu201D, while executing F-28 transaction.
IF there are any User-exit available to resole this issue ?

Rather than the use-exit, I suggest you to discuss this with configuration consultant who can make some change on the configuration and eliminate the error.
>
batramanish wrote:
> I am getting error "G/L account 407350 requires a valid tax codeu201D, while executing F-28 transaction.
> IF there are any User-exit available to resole this issue ?

Similar Messages

Error G/L A/c requires a valid tax code

hi freinds,
while using aiab T-code geting error G/L A/c 300030 requires a valid tax code the G/L for DEBTORS CTRL A/C (OTHERS-LOCAL) A/c is Recon. account for customer there no tick for tax category

For GL account 300030 you have checked teh check box "Relevant for tax" and you might have given tax category and thats why you are getting this error.
Go to FS00 and give this GL acccount and change in control data tab "Post without tax aloowed" check box". This will turn your error to warning adn will allow to post. Also if you feel remove any values in tax category.
Mind you I am assuming this as you are practicing and not for supportinhg any client. In th elater case, check with the client why this is configured and what tax code need to be given.
reward points if useful.
sarma

Database, Dataset, Table Adaptors Error "Unable to load, Update requires a valid DeleteCommand when passed DataRow collection with deleted row"

Microsoft Visual Basic 2010 Express.
I am new to Visual Basic programing and i am trying to understand the relationships between Datasets, database, table Adaptors. I have to following code that is is giving me the following error" Unable to load, Update requires a valid DeleteCommand
when passed DataRow collection with deleted rows".
I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
It seems that i can delete the data on the DataGridView Table and it only displays the correct data. but my database is not updating, even though the data grid displays differently.I can determine this because, when i save the offset database, i have all
the previous uploads and all the rows that i wanted to delete are still there.
My final goal is to be able to import offset data from a CSV file, save this data on the pc, send a copy of this data to a NuermicUpDown so the customer can modify certain numbers. From here they download all the date to a controller. IF the customer
needs to modify the imported data, they can go to a tab with a data grid view and modify the table. They will also have to option to save the modified data into a csv file.
Im not sure if i am making this overcomplicated or if there is a easier way to program this.
CODE:
Private Function LoadOffSetData()
        Dim LoadOffsetDialog As New OpenFileDialog 'create a new open file dialog and setup its parameters
        LoadOffsetDialog.DefaultExt = "csv"
        LoadOffsetDialog.Filter = "csv|*.csv"
        LoadOffsetDialog.Title = "Load Offset Data"
        LoadOffsetDialog.FileName = "RollCoaterOffset.csv"
        If LoadOffsetDialog.ShowDialog() = Windows.Forms.DialogResult.OK Then 'show the dialog and if the result is ok then
            Try
                Dim myStream As New System.IO.StreamReader(LoadOffsetDialog.OpenFile) 'try to open the file with a stream reader
                If (myStream IsNot Nothing) Then 'if the file is valid
                    For Each oldRow As MaterionOffsetDataSet.OffsetTableRow In MaterionOffsetDataSet.OffsetTable.Rows
                        oldRow.Delete()
'delete all of the existing rows
                    Next
                    'OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
                    Dim rowvalue As String
                    Dim cellvalue(25) As String
                    'Reading CSV file content
                    While myStream.Peek() <> -1
                        Dim NRow As MaterionOffsetDataSet.OffsetTableRow
                        rowvalue = myStream.ReadLine()
                        cellvalue = rowvalue.Split(","c) 'check what is ur separator
                        NRow = MaterionOffsetDataSet.OffsetTable.Rows.Add(cellvalue)
                        Me.OffsetTableTableAdapter.Update(NRow)
                    End While
                    Me.OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)
                    MainOffset.Value = OffsetTableTableAdapter.MainOffsetValue          'saves all the table offsets
to the offset numericUpDown registers in the main window
                    StationOffset01.Value = OffsetTableTableAdapter.Station01Value
                    StationOffset02.Value = OffsetTableTableAdapter.Station02Value
                   myStream.Close() 'close the stream
                    Return True
                Else 'if we were not able to open the file then
                    MsgBox("Unable to load, check file name and location") 'let the operator know that the file wasn't able to open
                    Return False
                End If
            Catch ex As Exception
                MsgBox("Unable to load, " + ex.Message)
                Return False
            End Try
        Else
            Return False
        End If
    End Function

Hello SaulMTZ,
>>I can track the error and its located in "OffsetTableTableAdapter.Update(MaterionOffsetDataSet.OffsetTable)" code. What am i missing?
This error usually shows that you do not initialize the
DeleteCommand object, you could check this
article to see if you get a workaround.
>> Im not sure if i am making this overcomplicated or if there is a easier way to program this.
If you are working CSV file, you could use OleDB to read it which would treat the CSV file as a Table:
http://www.codeproject.com/Articles/27802/Using-OleDb-to-Import-Text-Files-tab-CSV-custom
which seems to be easier (in my opinion).
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Account 555555 requires an assignment to a CO object

I am receiving following error in posting:
account 555555 requires an assignment to a CO object
please help

Hi,
For the GL account Cost center is the mandatory feild for posting to accounts.
Check IT0001or IT0027 if cost center is attached to the employees associated to the GL account.
Regards,
Hemant V. Mahale

Account 455150 require as assignment to a Co object

Dear Expert,
when i do the Release GR Bloked stock with the Reffrance off Material Document in MIGO at that time system give Error
1. Account 455150 require as assignment to a Co object.
Thanks in advance.
Regards
Mahendra.

Hi,
For you G/L account in tcode FS00 assign the cost object by giving your G/L account and click on edit cost element and then open the tab Default Acct Assgmt where in provide the cost center over there and save it.This will workout for sure.
Thanks
Edited by: Madhavi.n on Dec 13, 2011 8:46 AM

HT204053 I have downloaded icloud to my pc, however when i go to sign in to Apple through icloud, i get an error message saying my apple ID is valid but is not an icloud account. What does this mean and how can i update my account so i can access icloud?!

I have downloaded icloud to my pc, however when i go to sign in to Apple through icloud, i get an error message saying my apple ID is valid but is not an icloud account. What does this mean and how can i update my account so i can access icloud?!

To use iCloud, you must first set it up with your Apple ID on a device with iOS 5 or a Mac with OS X Lion.

When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian Store. You must switch to the US store before purchasing." I am in the US how do I switch?

When I try and download app updates via wi-fi to my Ipad I get an error message "Your account is not valid for use in the Australian store. Your must switch t the US store before purchasing. I am currently in the US on wi-fi. How do I switch

Change App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again.

Error in FB60 - Additional account assignment required for field BSEG-HBKID

Hi Experts
While posting an Invoice for a particular company code in FB60, we are facing the following error :
"Additional account assignment required for field BSEG-HBKID"
Message no. F5A122
Diagnosis
Additional account assignment has to be carried out for some fields on the detail screen.
System Response
Error message
Procedure
Select the relevant items and call up the detail screen.
We are unable to post any Non PO Based Invoices in this company code.
Kindly guide us on possible methods to rectify this error.
Regards
MM

Dear,
First Check the setup as described by Atif,
Also in OBC4 you will not find HBKID field, for this u need to select appropriate FSG, Under Payment Transaction Group please check if own Bank field is optional or not. by doing this as optional system will show House ban Field in Payment Tab of FB60, will be enabled and there will be two field one for House Bank and Other will be for Account ID.
Hope this helps.
Br, Vivek

MIGO Error - Account 6500029 requires assignment with CO object

Hi Experts,
I am facing problem with new material code opened recently. Valuation class assigned is ZSTD.
At the time of GRN, It is giving an error msg :
Message no. KI235. Account 6500029 requires assignment with CO object.
Kindly note I am not making an account assignment P.O. It is a normal P.O.
Previously also with same valuation class, we have received no. of materials with out any error.
It should post the material to my inventory account 1220000 as it did with materials of the same valuation class earlier. I don't know from where it is picking GL 6500029.
Kindly help.
Regards,
Rajneesh Gulati

Hi ,
In OBYC kindly check the Key BSX for the GL account assingment to the valuation class .
As inventory accounts are Balance sheet accounts and do no require an assingnment to a cost element .
If your account is getting changed then check the same in OBYC - BRX .
Regards ,
Dewang T

HT1918 I purchased Iphone in London. Then i shifted to India after 1 yr and now i want to change the account info. But when i tried to change the credit card details in itunes, i get an error message that this card is not valid in UK.

I purchased iphone in London one year back. Then i shifted to India recently. Now when i want to change my credit card detail in itunes, i get an error message that This card is not valid in UK. But i am no more in UK now. In the same page i edited my address but itunes does not change that details showing the above error message.

So you are trying to change the account from India to the Uk right...? Cause it wont accept UK card if you're trying to keep it for India...

Component not throwing validation error even if there is required in .jsff

I have component in my jsff page which has required validation however it still allows user to proceed without entering values following is my code
<panelLabelAndMessage id="plam1"
visible="true"
label="Label"
binding="#{backingBeanScope.MyClass.plam1}">
<inputListOfValues id="ilovDataEntryBranch"
readOnly="#{pageFlowScope.MyClassHelper.taskflowReadOnly}"
required="true"/>
<panelLabelAndMessage>
Still this component doesnt throw error of required field validation.
Please help.

Dear,
Check is there any pending STO and delivery for this material in system because if there are some pending document means your material is block there. So, kindly delete this pending delivery and STO then only you are able to do PGI for material.
For check pending delivery use T.Code VL06O --- > List outbound delivery --> in material data tab ---> enter material ---> then in Status : Outb. Delivs. ---> Total gds mvt stat. = A. ---> Execute.
May be it will help you.
Regards,
Sandip

Forms Authentication Error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed

I created a custom security extension following the steps listed in the Readme_Security Extension Sample. It works fine if I login as the user that is specified AdminConfiguration section of the rsreportserver.config file but if I
log in as another user, I get this error: User '' does not have required permissions. Verify that sufficient permissions have been granted and Windows User Account Control (UAC) restrictions have been addressed. I've added the user to both System Administrator
and System User roles to try to get it to work but still no luck.
Does anyone know how to fix this?
Thanks.

Hi MetronM,
The issue is due to that user have no permission to access the report server. In report manager, Reporting Services includes predefined roles that we can assign to users and groups to provide immediate access to a report server. Each role defines a collection
of related tasks.
You can refer to the following steps to assign corresponding role to the user.
Open report manager.
Click “Folder Setting” button.
Click “New Role Assignment” icon.
Type the user name and select the corresponding role.
There is an article about Granting Permissions on a Native Mode Report Server, you can refer to it.
http://technet.microsoft.com/en-us/library/ms156014.aspx
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

Account field required for some users, not for others in URM when checking

I am running into a real show stopper. I have been working in our development database, and have tested checking in content multiple times with no problems. I recently turned it over to my users to begin testing and they can not even check in one document, because they receive an error stating that the account is required. I know just enough to be dangerous, so I am not quite sure how to solve this one. It makes no sense to me that on my check in screen, account is not required and yet on all of my users check in screens, not only is it required, but nothing they enter is accepted as a valid value, so they can't even get past it. I would just as soon not have account show up or be required, but have struggled with making that happen, since it is not a custom metadata field. It appears to be a delivered field used for security purposes? any help would be appreciated! Thanks.
One more thing that I noticed that may be helpful in diagnosing this is that my profile has no accounts, just #none,#all
whereas the user's profiles have a number of different accounts listed in their profile. Could this be part of the reason that they are forced to enter an account when checking in content and I am not?
If so, how can I get around this?
Edited by: user10985708 on Apr 7, 2009 12:21 PM

That´s a little strange behaviour becouse normally the account field is not required as default.
You could try a global rule setting the Account field not to be required with some IDOC.
But as you say you´re not using accounts anyway i´d suggest removing it from your server instance.
In the server\config\CONFIG.CFG file look for UseAccounts=true set it to false and the field won´t bother you anymore.

Error occured in accounting message - Controlling cockpit

Hi All,
I have an item / Cproject and a project in PS linked to it. After the role requirement is done, system gives following messages in the PPM system.
Error occurred in accounting - check the costing in the ERP system Display Help
Maintain an activity type for cost/revenue rate R1
Maintain an activity type for cost/revenue rate ZB_ENG_S_TCAS
For last 2 messages I know that the activity type assignment to cost/revenue rate is needed. But for first message when I go to correct the entry in controlling cockpit it gives a message - Enter a valid value for the settlement type.
The settlement rule was created for PS project with settlement type FUL. Still this message is not getting cleared from the RPM system and from the controlling cockpit even after precessing it.
Can any one please let me know what can be done to solve this?
Regards,
Gaurav

Hi Yemi,
Controlling cockpit is accessed to view the error details in the accounting integration. This can be accessed through two ways.
1) In Project-->Accounting tab
2) Through tcode - COCPCPR
You can try the second method to view the error details.
And coming back to your query on project profile config in PS, as Pramod said, by standard SAP delivers a standard profile in SAP PS for cProjects-->PS integration. You can find the same in the below SPRO path.
Project System-->Structures-->Operative structure-->Work Breakdown structure(WBS)-->Create Project profile
Project profile name : CPR0001
This project profile is used when an automatic PS project is created through accounting integration.
Hope this helps.
Regards,
Ravi

Error: SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='

I'm getting the following error, but it only seems to happen with my 'admin' id. At our company we have a regular user id that we use for daily use that has our email attached to it, and then we have an admin id that has elevated privileges on the
various systems.
I haven't found any trace of this error appearing for anyone else in the system, only for my Admin id. I don't know if it has something to do with not having an Exchange account set up for it, or if there is something else missing. In searching
for this error I can find lots of references to Kerberos, but we don't have that running at this company. I'm not sure why it says Kerberos in the error message.
Any ideas?
THanks.
Ted
P.S. Here is the error:
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='Domain\ID', UPN='[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]:
WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access
the service.
at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity)
at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid)
at SyncInvokeUpnLogon(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..

Hi Ted,
What operations(e.g. create a site?) are your performing with your "admin" account, when you are getting this error?
Please check the following article with similar posts, e.g. grant the admin account proper permissions, or modify the config file (please back up the original file in a safe place for recovery in future), etc., let us know results.
http://onefootinthecloud.blogspot.jp/2012/01/save-template-error-no-windows-identity.html
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/efb39291-857c-4a85-b244-56712f11430a/sharepoint-2010-migrated-to-claims-strange-error?forum=sharepointadminprevious
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b4d06b64-a713-480e-a00c-d02a466ad891/claims-to-windows-token-issue?forum=sharepointadminprevious
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Error - G/L account 407350 requires a valid tax codeu201D.

Similar Messages

Maybe you are looking for