Error Handling in Open Hub Destination

Hi
I created a OHD of Third Party Type and the option : Delete Data from Table is set, because only delta records have to be sent.
Transformation and DTP(Delta mode of extraction) were created and the DTP is included in the Process Chain.The Process chain is executed via the ETL job of DataServices.
When the ETL job was executed data was extracted without any error.But when new records came and the delta records were again extracted from Data Services ETL Job there was an error and after the error was fixed and the DTP was executed again, the records were deleted from the OHD table as that option was set and hence no records were retrieved.
Can anybody help how this can be avoided, jus like in InfoSpoke we have the deactivate Delta option, is there anything with oHD or DTP?
Thanks...

Hi,
Your TR is failing, may be because in your target system, application server file system is different.
go to transaction AL11 and check that. If same folder structure is not available, get it created, or go to RSA1 and try changing your infospoke settings to point to the application sever file as in your target system.
You have to point this path to Q server.
~AK

Similar Messages

Error in Transporting Open Hub Destination Objects

Hi Experts,
When i transport the open-hub destination to Quality server from development, the error No Rule Type Exists occurs while activating the transformation.
The objects are transported but transformation & DTPs are inactive.
Please assist as this is for the first time Open-Hubs are being transported in my system.
Any help will be greatly appreciated.
Thanks,
Sumit

Hi,
the return code is 8
I checked and here is error log:-
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
   Activation of Objects with Type Transformation
   Checking Objects with Type Transformation
   Checking Transformation 08FM6JIPU6MCLHM2LWBY02OT6SXOPDNY
   No rule exists
Checking Transformation 09RS1PONVSGIHIJEHRGDCWPP4UD87TBY
   No rule exists
Checking Transformation 0MJTLNXZAUI7SKRWPKEFUIOCMB8X5TWQ
   No rule exists
Saving Objects with Type Transformation
Thanks,
Sumit

Unable to delete Open Hub Destination

Hi,
I have created an Open Hub Destination in RSA1-> Modeling-> Open Hub Destination.
However, when i try to delete it, i have this error:
Error while deleting open hub destination
Anyone has any idea how to delete an Open Hub Destination?
Thanks,
CH

Here is the message when deleting DTP with Delta update:-
Delta DTP cannot currently be deleted (see long text)
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.
According to the message, i need to delete all request. How to do that?
Appreciate your help. Thanks.

Open Hub Destination - Transport Error

Hi,
Following error occured while transporting the Open Hub Destination(OHD) to QA.
Created OHD using Logical file as File type.
Syntax group: WINDOWS NT.
Transport Error Log:
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Activation Mode)
Application server bidwXXX does not exist.
Start of the after-import method RS_DEST_AFTER_IMPORT for object type(s) DEST (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DEST L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
are we missing anything configuration here?
Regards

Ananda,
This is my file path in Dev:
D:\usr\sap\<SYSID>\DVEBMGS00\work\<FILENAME> in this path i have mentioned BWD instead of <SYSID> initially, it failed so i thought i would give a try by giving the parameter <SYSID> instead of BWD, even that failed.
When i have transported OHD with the path D:\usr\sap\<SYSID>\DVEBMGS00\work\<FILENAME> it was created in QA in the same directory as mentioned in Dev.So i believe i have the right file path in QA.
Thanks.

Open Hub Destination error

Hi,
I am working on Open Hub (first time ofcourse). And performing following steps:-
Modeling>Open Hub> InfoArea> Create Open Hub Destination> Output to File .csv. field names>DIrectory> activate> Create transformation> activate Transformations>Create DTP..Here I am getting an error that destination Open Hub is not active.
Can anyone please tell me am i missing any step here?
Thanks

Hi...
Always bear in mind that the OHD, once created, should be saved and activated, before creating any transformations or DTPs for it.
And each time the OHD is changed, all the objects corresponding to it... (The transformations and the DTPs) should be activated.
Hope this helps.
Thanks
Sree Ramya Lanka

Error in Open Hub Destination Transport

Hi All,
I am facing the following problem in transporting the openhub destination.
We have created a Open Hub Destination with following settings.
Destination Type :- 'FILE'
We have ticked the application Server name checkbox.
In the server name we have selected our BI Development Server.
In the type of File Name we have selected 'Logical File Name'. We have maintained the details in AL11 and FILE transactions.
While transporting it to our Quality system, it throws an error saying it does not recognize the server name (which is true, the server name is different in quality system).
Needed your guidance if there is any setting like source system conversion where it would change the name?
Also if you could guide me regarding the best practices to transport the entries we have created in AL11 and FILE it would be realy nice. I did a search on this in SDN and could not find any useful stuff for my case.
Thanks in advance.

Hi,
Your TR is failing, may be because in your target system, application server file system is different.
go to transaction AL11 and check that. If same folder structure is not available, get it created, or go to RSA1 and try changing your infospoke settings to point to the application sever file as in your target system.
You have to point this path to Q server.
~AK

Help~open hub destination file is not open error!

Hi all,
I met a problem, i tried several times and all got error messages.
It is about open hub destination, i want to use it to send some files to sever, but when i execute the DTP, i got system dump:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Runtime Errors         DATASET_NOT_OPEN
Except.                CX_SY_FILE_OPEN_MODE
Date and Time          26.10.2011 01:18:09
Short text
    File "I:\usr\sap\Q26\DVEBMGS11\work\ZSS_O0021.CSV" is not open.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_RSB_FILE_APPLSRV===========CP" had to
     terminated because it has
    come across a statement that unfortunately cannot be executed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have two open hub, one is fine ,but the rest one always get this error. Help..........

Thanks! I checked my ID and found that i have the role to access this folder.
Then i found that our Q system have two servers, A and B, for open hub i should run my process chain in system B, but i forgot that, so i got error. After i changed to sever B, i re-active my open hub and DTP, then re-fresh the process chain and re-executed it again, the error disappeared.

Open Hub Destination - From BI7 to R/3 error

Hi All ,
I am in the process of transferring infocube data from BI 7.0 to R/3.
I created an open hub destination with third party . Once I execute the DTP , i get an
error message
CREATE DATA : The specified type /BIC/OH**** id no valid data type.
The RFC connection between both the systems is in place .
Please guide me where i am going wrong.
Any help is highly appreciated.
Thanks & Regards,
Anjna Goyal

Hi,
Set the correct parameters in case of other Systesm i.e. external system, see the below articles on Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Thanks
Reddy

Open hub destination with datasource as the source

Hi,
I am trying to use the new features of BI for open hub destination where you can use datasource as the source for extraction.
I have created an infopackage, loaded data to PSA and from there to open hub destination via the DTP.
When I try to execute the DTP, I get the following error:
<b>Datapackage processing terminated.
Error in substep
You are not authorized to use this transformation.</b>
I have been able to use the DTP to load open hub destination targets with datastore and infocubes as source.
Also when we turn on the security trace, it doesn't fail anywhere.
Has anybody faced a similar problem?
Any help appreciated,
Thanks,
Payal.

I have created to OHD - one for a 3.5 data source and one for a 7.0 data source (both are different data sources). While creating DTP for the 7.0 data source, it did create a default mapping for transformation.
But I still get same error in both cases.
When I create the DTP, it tries to create a transformation. But I get an information message :
Exception CX_RS_MSG occurred (program: CL_RSBK_PATH==================CP, include: CL_RSBK_PATH==================CM00I, line: 16).
I can still activate the DTP and when I run it says I don't have authorization to this transformation.
I think there are issues while creating the transformation, but I don't know what!
-Payal.

Open Hub Destination transports

Hi Experts..
We have crated Open Hub destinations to pull data from ODS to DB table in BI 7.0. But while transport the transformations for OHD are failing with transformation becoming inactive with error messageu201D Target ODSO ZODS*** does not exist" But the ODS is present in QA system and is in active version.
So can any one pls help me to know the proper sequence for Open Hub Destination transport and the necessary objects to be captured in the request? Currently I had captured OHD, transformation and DTP in the same request.
<removed by moderator>
Regards,
Umesh.
Edited by: Siegfried Szameitat on Jan 16, 2009 11:57 AM

Send the OHD in one request, transformations in one request, then DTP in another request.
When club transformations & DTP together it fails in my experience.

Open hub destination issue

Hi,
In our project we have Client Instance (eg: BWPD) and Application server (eg: BWPRD) defined for load balancing.
We have created open hub and assigned destination server BWPD.
When i execute the DTP manually in BWPD, it runs succesfully.
However, the same DTP when placed in the process chain fails with error message :
No Such File or Directory
Could not open file D:\usr\sap\BWPD\A01\work\Material on application server
Error while updating to target ZXXXX.
Options Tried:
Schedule process chain in the background server BWPD (same server which has been mentioned in Open hub dest) still DTP failed.
Tried with Application server it failed.
Tried with HOST as option it failed.
couldn't make out what is going wrong. Any thoughts ?
Regards.

Hi there,
found that doc quite useful.
Maybe could shed some light to your issue.
[Creating Open Hub Destination using a Logical file to extract the data|Creating Open Hub Destination using a Logical file to extract the data]
Also, what OS do you have?
is the Syntax Group accordingly created ?

Issue for DTP from DSO to open hub destination

Hello Gurus,
        I have a issue for DTP from DSO to open hub destination, long text for error in the monitor is as follows:
          " Could not open file
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2 on application server"
          " Error while updating to target ZFIGLH03 (type Open Hub Destination)     "
      for open hub destination, I check the configure for logical file name , which is "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr",
I am wondering where that file "
SAPBITFS\tst_bi\bit\BIWork\GENLGR_OneTimeVendr_2" in the error message comes from?
Many thanks,

Hi
You do not need to create a file in application server. It will be created automatically.
But if you have defined a logical file name in tcode FILE and used that in OHD and if it is not correct then it will show a conflict. Check this out.

I am getting an dump while executing open hub destination?

I did happened to delete a filed in the open hub and then activated and re-ran it i am getting the following error!!
error analysis
You attempted to assign a field to a typed field symbol,
but the field does not have the required type.
open hub is active, dtp is active and transformations is active too but still the same!!
Can anyone advise me on this!!
thanks
pooja

Hi,
See in
http://wiki.sdn.sap.com/wiki/display/profile/Surendra+Reddy
Open Hub Destination
Open Hub Destination: Part 1
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%201.pdf
Open Hub Destination: Part 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/m-o/open%20hub%20destination%3a%20part%202.pdf
Analysis Process Designer (APD)
Analysis Process Designer (APD): Part - 1
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f06353dd-1fe3-2c10-7197-dd1a2ed3893e?quicklink=index&overridelayout=true
Analysis Process Designer (APD): Part - 2
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%20Part%20-%202.pdf
Analysis Process Designer (APD): Part - 3
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/business-intelligence/a-c/analysis%20process%20designer%20(APD)%3a%20Part%20-%203.pdf
Thanks
Reddy

Erase data from open hub destination data service

Hi,
I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
The error given is the following:
Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
Message no. RSM077
Diagnosis
One or more DTP requests have already updated the request.
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
Thanks.

Hi,
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Follow the same steps above , that means delete the requests from the Cube Zrappel.
right click on the cube -
> Delete Data
now the syatem will promt you asking
Do you want to delete the content of data target Zrapple ?
say yes for it .
hope this will solve your problem
santosh

Open Hub Destination over a Datasource as a source

Hi Expert,
I am trying to create Open hub destination over Datasource as a source
it showing me an error "Cannot connect DataSource to an open hub destination".
Can anyone tell me is it possible to create an open hub destination over a datasource
If yes then how?
Thanks and Regards
Lalit Kumar

HI lalit,
Check the below forum for refer they have refer using datasource as source for OHD m nt sure:
Open hub destination with datasource as the source
OHD ISSUE
Thanks,
Deepak
Edited by: Deepak Machal on Dec 15, 2011 11:04 AM

Error Handling in Open Hub Destination

Similar Messages

Maybe you are looking for