Error in accessing database homepage for oracle10g in fedora 13
hii there,
i have installed oracle10g in fedora 13. and i got problem in accessing database home page and also sqlplus.follwing message i got...
Unable to connect
Firefox can't establish a connection to the server at 127.0.0.1:8080.
* The site could be temporarily unavailable or too busy. Try again in a few
moments.
* If you are unable to load any pages, check your computer's network
connection.
* If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.
What's the sqlplus error?
Similar Messages
-
"Error while accessing porting layer for ORACLE database via getSessionId()
Hi,
My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
... 90 moreActually, now (after the GRANT described in my reply before) the Exception has changed to:
Caused by: com.sap.sql.log.OpenSQLException: Error while
accessing porting layer for ORACLE database via
<b>getDatabaseHost</b>().
at com.sap.sql.log.Syslog.createAndLogOpenSQLException
(Syslog.java:148)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createPooledConnection(DirectConnectionFactory.java:527)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:158)
at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:118)
at com.sap.sql.connect.factory.PooledConnectionFactory.
createPooledConnection(PooledConnectionFactory.java:119)
at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
getPooledConnection(DriverPooledConnectionFactory.java:38)
at com.sap.sql.connect.datasource.DBDataSourceImpl.
createPooledConnection(DBDataSourceImpl.java:685)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPool(DBDataSourcePoolImpl.java:1081)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPooledConnection(DBDataSourcePoolImpl.java:919)
at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
getConnection(DBDataSourcePoolImpl.java:67)
at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
getConnection(DatabaseDataSourceImpl.java:36)
at com.sap.engine.services.dbpool.spi.
ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
... 90 more -
Database not found/Error: ORA-16621: database name for ADD DATABASE must be
I am new to Data Guard and am trying to set up Data Guard Broker. I had created a configuration file with both my primary and standby databases and at one time I could show both databases. But now I can no longer show the standby database nor can I enable, disable or reinstate it. Here is what I have:
Primary Database: orcl10g
Standby Database: 10gSB
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose orcl10g
Database
Name: orcl10g
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
orcl10g
Properties:
InitialConnectIdentifier = 'orcl10g'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '10gSB, orcl10g'
LogFileNameConvert = '/oracle/oracle/product/10.2.0/oradata/orcl10g/redo01.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo01.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo02.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo02.log, /oracle/oracle/product/10.2.0/oradata/orcl10g/redo03.log, /oracle/oracle/product/10.2.0/oradata/10gSB/redo03.log'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'remarkable.mammothnetworks.com'
SidName = 'orcl10g'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521))'
StandbyArchiveLocation = '/oracle/flash_recovery_area/orcl10g/archivelog'
AlternateLocation = ''
LogArchiveTrace = '1024'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "orcl10g":
SUCCESS
DGMGRL> show database verbose 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> remove database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> reinstate database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> enable database 10gSB
Object "10gsb" was not found
DGMGRL>
DGMGRL> add database '10gSB' as
connect identifier is 10gSB
maintained as physical;Error: ORA-16621: database name for ADD DATABASE must be unique
Failed.
How can I get Data Guard to see the standby database correctly again?Thank you for the constructive feedback. I have been able to make progress on this issue.
I did check the Data Guard Log files as you suggested. I did not find anything when I checked them before but this time I found the following:
DG 2011-06-16-17:23:18 0 2 0 RSM detected log transport problem: log transport for database '10gSB' has the following error.
DG 2011-06-16-17:23:18 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16737: the redo transport service for standby database "10gSB" has an error
DG 2011-06-16-17:23:18 0 2 0 NSV1: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 0 RSM0: Failed to connect to remote database 10gSB. Error is ORA-12514
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
DG 2011-06-16-17:23:18 0 2 753988034 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16778
I verified that I am able to connect to both the primary and standby databases via external connections:
-bash-3.2$ lsnrctl status
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 17-JUN-2011 12:41:03
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 17-JUN-2011 01:40:30
Uptime 0 days 11 hr. 0 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /oracle/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=remarkable.mammothnetworks.com)(PORT=1521)))
Services Summary...
Service "10gSB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_DGB" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "10gSB_XPT" has 1 instance(s).
Instance "10gSB", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl10g" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10gXDB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_DGB" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
Service "orcl10g_XPT" has 1 instance(s).
Instance "orcl10g", status READY, has 1 handler(s) for this service...
The command completed successfully
-bash-3.2$
-bash-3.2$
-bash-3.2$ sqlplus system/dbas4ever@orcl10g
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:41 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
SQL> quit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
-bash-3.2$ sqlplus system/dbas4ver@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 12:43:59 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress <== I think this is normal since the database is in mount mode
Enter user-name:
I also checked the listener log file and did see and error associated with a known bug:
WARNING: Subscription for node down event still pending
So I added the following to the listener.ora file and bounced the listener:
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
That seems to have taken care of the error.
The following is my listener.ora file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1)
(PROGRAM = extproc)
(SID_DESC = ( GLOBAL_DBNAME = 10gsb_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g_DGMGRL.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = orcl10g.remarkable.mammothnetworks.com )
( SERVICE_NAME = orcl10g.remarkable.mammothnetworks.com )
( SID_NAME = orcl10g )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
(SID_DESC = ( GLOBAL_DBNAME = 10gsb.remarkable.mammothnetworks.com )
( SERVICE_NAME = 10gsb.remarkable.mammothnetworks.com )
( SID_NAME = 10gsb )
( ORACLE_HOME = /oracle/oracle/product/10.2.0/db_1 )
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
I again tried connecting externally to the standby database:
-bash-3.2$ sqlplus system/dbas4ever@10gSB
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Jun 17 13:09:00 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01033: ORACLE initialization or shutdown in progress
Enter user-name:
and see this in the listener.log file:
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11357)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11358)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:10:24 * service_update * 10gSB * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25119)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=perl)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25120)) * establish * orcl10g * 0
17-JUN-2011 13:10:30 * (CONNECT_DATA=(SID=orcl10g)(CID=(PROGRAM=emagent)(HOST=localhost.localdomain)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=25121)) * establish * orcl10g * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11420)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:22 * (CONNECT_DATA=(SERVICE_NAME=10gSB_XPT)(SERVER=dedicated)(CID=(PROGRAM=oracle)(HOST=remarkable.mammothnetworks.com)(USER=oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=199.187.124.130)(PORT=11422)) * establish * 10gSB_XPT * 0
17-JUN-2011 13:11:24 * service_update * 10gSB * 0
I tried again to see the database in Data Guard Broker:
DGMGRL> show database 10gSB
Object "10gsb" was not found
however, I then was able to add the database in Data Guard Broker:
DGMGRL> add database 10gSB
as connect identifier is 10gSB
maintained as physical;Database "10gsb" added <== this is progress!!!
However the configuration shows the following:
DGMGRL> show database 10gSB
Database
Name: 10gsb
Role: PHYSICAL STANDBY
Enabled: NO
Intended State: OFFLINE
Instance(s):
10gSB
Current status for "10gsb":
DISABLED <=====
So I tried to enable the database:
DGMGRL> enable database 10gSB
Error: ORA-16626: failed to enable specified object
Failed.
and I tried to reinstate the database:
DGMGRL> reinstate database 10gSB
Reinstating database "10gsb", please wait...
Error: ORA-16653: failed to reinstate database
Failed.
Reinstatement of database "10gsb" failed
So I checked the configuration and now see two entries for the standby database but with case differences:
DGMGRL> show configuration
Configuration
Name: orcl10g
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
orcl10g - Primary database
10gSB - Physical standby database
10gsb - Physical standby database (disabled)
Current status for "orcl10g":
SUCCESS
Question: How do I get rid of 10gSB and enable 10gsb? -
MS access database prompting for username and password
Hello,
When I try to run a crystal report that is connected to a (Access Database) from crystal server 2013, I get prompted for a username and password. Im not sure what im doing wrong, Ive tried creating a ODBC connection, change the SAP service to run under a domain user account, recreated the report with a different file path. but still no luck, please help im at a lose.
Thank youHello,
Refer please to the following kbas, probably this can help you :
http://service.sap.com/sap/support/notes/1270997
http://service.sap.com/sap/support/notes/1661997
Regards,
Asma -
Error using Oracle Database Gateway for DRDA
Hello All,
We're encountering issues while trying to query a table using a db link to DB2 database.
We are running oracle 11g R1 on windows and we have DB2 installed on the box. We've installed database gateway for DRDA also on the same box. The gateway is running on a different home location within the same machine. But we get the following error while trying to query across the db link. Would be great if you can take a look and suggest appropriate changes.
ORA-28545: error diagnosed by Net8 when connecting to an agent
Unable to retrieve text of NETWORK/NCR message 65535
ORA-02063: preceding 2 lines from UDB
Here's how we configured the gateway:
Listener:
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=DB2)
(ORACLE_HOME=E:\app\Oracle\product\11.1.0\db_1)
(PROGRAM=g4drsrv)
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=E:\app\Oracle\product\11.1.0\db_1)
(PROGRAM=extproc)
Tns:
dg4drda.idc.oracle.com =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xpone.idc.oracle.com)
(PORT = 1521))
(CONNECT_DATA =
(SID= DB2))
(HS=OK)
initDB2.ora
HS_COMMIT_POINT_STRENGTH=255
HS_NLS_DATE_FORMAT=YYYY-MM-DD
HS_LANGUAGE=AMERICAN_AMERICA.WE8ISO8859P1
HS_RPC_FETCH_REBLOCKING=off
HS_RPC_FETCH_SIZE=32767
HS_FDS_FETCH_ROWS=20
FDS_CLASS=DG4DRDA_DB2UDB
DRDA_CONNECT_PARM=xpone.idc.oracle.com:50000
DRDA_REMOTE_DB_NAME=SAMPLE
DRDA_PACKAGE_COLLID=ORA11
DRDA_PACKAGE_NAME=G2DRSQL
DRDA_PACKAGE_CONSTOKEN=A929B170D366FB00
DRDA_RECOVERY_USERID=ORADRDA
DRDA_RECOVERY_PASSWORD=ORADRDA
DRDA_ISOLATION_LEVEL=CS
DRDA_DISABLE_CALL=TRUE
DRDA_CODEPAGE_MAP=codepage.map
heres how we created the db link:
CREATE DATABASE LINK udb CONNECT TO ORACLE IDENTIFIED BY "welcome1" USING 'dg4drda.idc.oracle.com';
and this was the sql executed
select * from employee@udb;
Really appreciate your assistance.
Regards
KrishnaHello Mike,
Here's the entire listener entry (I've changed the SID to DB2. Consequently I have also changed the SID in tns and gateway init under folder "11.1.0\tg_1\dg4drda\admin"
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = XPONE)(PORT = 1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=DB2)
(ORACLE_HOME=E:\app\Oracle\product\11.1.0\db_1)
(PROGRAM=g4drsrv)
(SID_DESC=
(SID_NAME=PLSExtProc)
(ORACLE_HOME=E:\app\Oracle\product\11.1.0\db_1)
(PROGRAM=extproc)
I've also added the necessary IP entry to my host file.
Here's the listener log. I've grabbed it for 2 consecutive attempts to bind the package.
<msg time='2010-02-11T11:11:25.562-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Trace information written to e:\app\oracle\diag\tnslsnr\xpone\listener\trace\ora_752_2136.trc
</txt>
</msg>
<msg time='2010-02-11T11:11:25.562-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2010-02-11T11:11:25.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>
</txt>
</msg>
<msg time='2010-02-11T11:11:25.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Started with pid=752
</txt>
</msg>
<msg time='2010-02-11T11:11:25.593-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
</txt>
</msg>
<msg time='2010-02-11T11:11:25.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=1521)))
</txt>
</msg>
<msg time='2010-02-11T11:11:28.031-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2010-02-11T11:11:28.062-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2010-02-11T11:11:29.546-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=8080))(Presentation=HTTP)(Session=RAW))
</txt>
</msg>
<msg time='2010-02-11T11:11:29.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:29 * service_register * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:45.015-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:44 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=E:\app\Oracle\product\11.1.0\db_1\bin\sqlplus.exe)(HOST=XPONE)(USER=Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1076)) * establish * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:47.500-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:47 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:49.890-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:49 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=E:\app\Oracle\product\11.1.0\db_1\bin\sqlplus.exe)(HOST=XPONE)(USER=Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1077)) * establish * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:53.500-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:53 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:54.343-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:54 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=E:\app\Oracle\product\11.1.0\db_1\bin\sqlplus.exe)(HOST=XPONE)(USER=Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1078)) * establish * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:11:56.515-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:11:56 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:12:02.531-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:02 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:12:11.546-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:11 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:12:13.140-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:13 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1080)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:12:13.156-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:12:13.390-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:13 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1081)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:12:13.437-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:12:35.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:12:35 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:13:41.718-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:13:41 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:14:11.765-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:14:11 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:14:14.781-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:14:14 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:14:23.796-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:14:23 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:15:53.843-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:15:53 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:16:11.875-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:16:11 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:16:26.890-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:16:26 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:17:35.921-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:17:35 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:17:37.546-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:17:37 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:17:42.203-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=8080))(Presentation=HTTP)(Session=RAW))
</txt>
</msg>
<msg time='2010-02-11T11:17:42.218-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:17:42 * service_died * orcl * 12537
</txt>
</msg>
<msg time='2010-02-11T11:17:54.265-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>System parameter file is E:\app\Oracle\product\11.1.0\db_1\network\admin\listener.ora
</txt>
</msg>
<msg time='2010-02-11T11:17:54.281-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Log messages written to e:\app\oracle\diag\tnslsnr\xpone\listener\alert\log.xml
</txt>
</msg>
<msg time='2010-02-11T11:17:54.281-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Trace information written to e:\app\oracle\diag\tnslsnr\xpone\listener\trace\ora_3060_3104.trc
</txt>
</msg>
<msg time='2010-02-11T11:17:54.281-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Trace level is currently 0
</txt>
</msg>
<msg time='2010-02-11T11:17:54.296-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>
</txt>
</msg>
<msg time='2010-02-11T11:17:54.296-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Started with pid=3060
</txt>
</msg>
<msg time='2010-02-11T11:17:54.296-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
</txt>
</msg>
<msg time='2010-02-11T11:17:54.328-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=1521)))
</txt>
</msg>
<msg time='2010-02-11T11:17:56.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listener completed notification to CRS on start
</txt>
</msg>
<msg time='2010-02-11T11:17:56.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
</txt>
</msg>
<msg time='2010-02-11T11:18:06.562-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:06 * service_register * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:09.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:09 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:12.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:12 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:18.625-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:18 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:39.625-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xpone)(PORT=8080))(Presentation=HTTP)(Session=RAW))
</txt>
</msg>
<msg time='2010-02-11T11:18:39.625-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:39 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:42.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:42 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:18:48.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:18:48 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:19:00.687-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:00 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl)(CID=(PROGRAM=E:\app\Oracle\product\11.1.0\db_1\bin\sqlplus.exe)(HOST=XPONE)(USER=Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1095)) * establish * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:19:03.625-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:03 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:19:17.140-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:17 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1096)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:17.171-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:17.265-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:17 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1097)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:17.296-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:20.578-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:20 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1098)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:20.609-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:20.671-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:20 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1099)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:20.703-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:21.640-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:21 * service_update * orcl * 0
</txt>
</msg>
<msg time='2010-02-11T11:19:23.015-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:22 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1100)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:23.046-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
<msg time='2010-02-11T11:19:23.156-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>11-FEB-2010 11:19:23 * (CONNECT_DATA=(SID=DB2)(CID=(PROGRAM=)(HOST=MSHOME\XPONE)(USER=XPONE\Oracle))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.100)(PORT=1101)) * establish * DB2 * 12518
</txt>
</msg>
<msg time='2010-02-11T11:19:23.187-05:00' org_id='oracle' comp_id='tnslsnr'
type='UNKNOWN' level='16' host_id='XPONE'
host_addr='192.168.0.100'>
<txt>TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
32-bit Windows Error: 2: No such file or directory
</txt>
</msg>
And finally, the listener is starting from Oracle Home and I do not have any other Oracle products installed.
Thanks a billion for all your suggestions.
Regards
Krishna -
Error on Create Database command for Oracle 9i on Red Hat 9
Error on Create Database command
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16
CREATE DATABASE ora9i
ERROR at line 1:
ORA-01092:ORACLE instance terminated. Disconnection forced.
initora9i.ora file contents :
background_dump_dest=$HOME/ADMIN/BDUMP
core_dump_dest=$HOME/ADMIN/CDUMP
db_name=ora9i
db_files= 80
db_file_multiblock_read_count=8
db_block_buffers=100
shared_pool_size = 3500000
log_checkpoint_interval = 10000
processes=50
parallel_max_servers=5
log_buffer = 32768
max_dump_file_size = 10240
global_name = TRUE
control_files=$HOME/ORADATA/ctrl01.ctl
undo_management=AUTO
user_dump_dest=$HOME/ADMIN/UDUMP
-------------------------------------------------Pleae include REUSE keyword at the end of each file location as shown below...
CREATE DATABASE ora9i
LOGFILE
GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M REUSE,
GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M REUSE
DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M REUSE
AUTOEXTEND ON NEXT 50M MAXSIZE 150M
DEFAULT TEMPORARY TABLESPACE temp
TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M REUSE
AUTOEXTEND ON NEXT 5M MAXSIZE 30M
CHARACTER SET WE81SO8859P1
NATIONAL CHARACTER SET AL16UTF16 -
Database error says connect by clause for Oracle10g
Hi All,
I am trying to select details from anodestable where error says SQLException connect by clause is required in this query block.
Please respond if you know how to resolve this error.
Thanks in advance.
ByeKatheresh wrote:
Hi All,
I am trying to select details from anodestable where error says SQLException connect by clause is required in this query block.
Please respond if you know how to resolve this error.
Thanks in advance.
ByeCould you post the SQL code and the error you got? -
Error when accessing database Struts2 + JPA + Spring + Hibernate 3
Good day,
I was able to deploy my WAR file application (moved the queries in the xml file into ) and the first page works fine. However when i try loging in (which access the the database) i get this error.
org.hibernate.QueryException: ClassNotFoundException: org.hibernate.hql.ast.HqlToken
thanksalso I have the jar files inside WEB-INF/lib of the war file that i deployed
-
Error Connection to Database Homepage
Hi everyone,
This is my very first time using Oracle 10g( Express Edition). I have some problems to connect to the database home page. Once i clicked go to database home page, the IE explorer will display the following message.
Internet Explorer cannot display the webpage
Most likely causes:
You are not connected to the Internet.
The website is encountering problems.
There might be a typing error in the address.
Any assistance is greatly appreciated. Thank you, all. Cheers. =)Hi, can try with this operation:
Class.forName ("oracle.jdbc.OracleDriver");
Connection conn = DriverManager.getConnection
("jdbc:oracle:thin:@//localhost:1521/orcl", "brunors", "mypass");
I think this hope you :
JDBC - Oracle FAQ
OracleDriver (Oracle Database JDBC Java API Reference)
Hugs, Bruno Reis. -
While trying to import to MSSQL2012 from SSDT using the wizard from an Access 2013 DB (.accdb) which is password protected, I get the following error with the username blank and the password field correctly populated:
Cannot start your application. The workgroup information file is missing or opened exclusively by another user. (MicrosoftOffice Access Database Engine)
But according to this link:
http://office.microsoft.com/en-us/access-help/what-happened-to-user-level-security-HA010342116.aspx
MSA10 and beyond shouldn't need workgroup information files, although it's not clear to me if they are
created/used or not.
I can point the wizard to some local version of system.mdw at Advanced -> All -> Jet OLEDB:System Database, and then the error becomes:
Not a valid account name or password. (Microsoft Office Access Database Engine)
for any username I can think of.
Questions:
1. Why does this data source insist on looking for a workgroup information file even though user-level security should be disabled?
2. Why does the Open dialog box for the Microsoft Access Database Engine have *.mdb as the only selectable filetype?
3. How can I get around these errors for an .accdb that is password protected?
Thanks!Hi JordanPG,
To connect to Access 2007 or later database, we need the Microsoft ACE 12.0 OLE DB driver. SQL Server only installs the Microsoft Jet 4.0 OLE DB driver which can be used to connect to Access 2003 or earlier database. Besides, the Microsoft Jet 4.0 OLE DB
driver only has 32-bit version, but the Microsoft ACE 12.0 OLE DB driver has both 32-bit and 64-bit version. However, the 32-bit and 64-bit Microsoft ACE 12.0 OLE DB drivers cannot be installed on a single server.
According to your description, you can use the 64-bit SQL Server Import and Export Wizard to load data from the Access database, so the 64-bit Microsoft ACE 12.0 OLE DB driver is installed on your computer. Since the BIDS/SSDT is a 32-bit application, the
64-bit Microsoft ACE 12.0 OLE DB Provider is not visible in BIDS/SSDT. So, when you said that you select “Microsoft Access (Microsoft Access Database Engine)" in the SQL Server Import and Export Wizard (it is actually the 32-bit version) started by the SSDT,
I think it should be “Microsoft Access (Microsoft Jet Database Engine)”. Because the Microsoft Jet 4.0 OLE DB driver only supports Access 2003 or earlier format, it threw the error “Test connection failed because of an error in initializing provider. Unrecognized
database format 'C:\myDB.accdb'”.
In this situation, you have two approaches to avoid this issue:
Launch the SQL Server Import and Export Wizard (64-bit), and select “Save SSIS Package” to “File System” on the “Save and Run Package” page. Then, the package will be saved to a specified directory. After that, you can add this existing package to a SSIS
project. The status of the corresponding OLE DB Connection Manager should be Work Offline, or the OLE DB Source will throw an error about 32-bit driver if the Connection Manager is not in Work Offline status, you can ignore that and the package can run successfully
in SSDT as long as the project is set to run in 64-bit runtime mode.
However, for the SSDT 2012 integrated with Visual Studio 2012, the 64-bit runtime mode is disabled. In this situation, to run the package in SSDT, you have to uninstall the 64-bit Microsoft ACE 12.0 OLE DB drivers and install the 32-bit one. Here is the
download link:
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Regards,
Mike Yin
TechNet Community Support -
we formatted Database server and restored all the databases from the backup. but the sharepoint site is giving below error when i access the home page.
we have 3 application servers in that two are working fine, but only one server getting the below error.
SQL database login for 'SharePoint_Config_2010' on instance 'db server' failed. Additional error information from SQL Server is included below.
Login failed for user 'domain\user'.
could you help what is the issue?Hi,
According to your post, my understanding is that you failed to access sharepoint site with one application server.
It was due to the MOM/SCOM Agent that has a SharePoint management pack installed, the agents Windows Service runs as ‘Local System’ and thus causes this.
The workaround is to either kill the SCOM agent service, or set it to run as a dedicated service account.
In addtion, I recommend to add the logon account of the SharePoint Timer service as a user of the SharePoint_Config database. Give role membership to the account db_owner.
You also need to add the SharePoint accounts back into sql server.
There are some similar articles for you to take a look at:
http://blog.blksthl.com/2012/04/26/login-for-sharepoint_config-login-failed-for-user-domaincomputername-scom-agent/
http://msdn.microsoft.com/en-us/library/jj551781(v=nav.70).aspx
http://sharepoint.stackexchange.com/questions/51623/moved-sql-databases-for-sharepoint-2010-and-now-have-a-3351-error
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Error in database parameter for star schema table in RSRV
Hi Experts,
In RSRV, I executed the following checks in my cube and it is showing me the following error:-
1) Check database parameter for star schema table for InfoCube ZMM_MVAL
564971 units missing from fact table /BIC/FZMM_MVAL; see details
Message no. RSRV134
Diagnosis
In the fact table /BIC/FZMM_MVAL records have been found that contain values other than zero for key figures that have units, but that have no value for the unit of the key figure. Since the value of the unit has to correspond to the value of the key figure, this inidicates an error when the data was loaded. The values of the units have not been loaded into BW correctly. Choose Details to display the incorrect records.
2) Consistency of time dimension of InfoCube ZMM_MVAL
/BIC/FZMM_MVAL PARTITIONED 1878 ( 30 - 50 )
Please advise me on this.
Thanks in Advance.
AparnaAs mentioned in the log, check the Unit KFs in your cube and make sure that unit is populated for all such values.
e.g. if Qty is 5 KG, then unit KF will have 5 and unit info object should have KF.
Regards,
Gaurav -
How To Insert Data into a Access Database from a PDF File
Hi All,
Could anyone help me to insert PDF form data to an MS Access database.I am new to this and I would appreciate if anyone can help me at the earliest.
Thanks,
DeeptiYou can submit your PDF to a server-side script (ASP/PHP), and store the new record in a MS Access database.
For more information on how to store your PDF submission in a database, please visit:
http://www.fdftoolkit.net -
when installing 9i server i couldn't create database and after installation i tried to create database using DBCA but same errors occured.
it says null sid name error=2. and then says tns protocol problem.
what should i do?Kim Gabrielsen (guest) wrote:
: Hi,
: I have tried to install O8 on Linux several times but all have
: failed. I follow the doc written by Tom Bissett which I find
very
: informative on this subject.
: I have the correct env setting, have created oracle user as
: member of the dba group and the install program runs nicely
until
: it starts to create the database. It stops with an error
message.
: The log files look like this (excerpts):
: CRDBORCL.LST
: ORA-06413: Connection not open.
: LCC-00161: Message 161 not found; product=SVRMGR; facility=MGR
: ORA-06413: Connection not open.
: create database "ORCL"
: ORA-03114: not connected to ORACLE
: ORA-06413: Connection not open.
: which is the same results I see if I invoke svrmgr manually
: and tries to connect as 'internal'. BTW srvmgr prompts me for a
: password even though I'm logged on as 'Oracle' which is a
member
: of DBA.
: INSTALL.LOG
: - Entering database actions section.
: - Creating initORCL.ora file
: - Creating crdb2ORCL.sql database catalog and file
creation
: script
: - ERROR: The 'CREATE DATABASE' statement for the ORCL
: database failed.
: egrep failed to find 'ORA-' error in the file:
: /u01/app/oracle/admin/ORCL/create/crdbORCL.lst
: I hope someone can help 'cause I'm stock here...
: Best regards
: Kim Gabrielsen
If you followed the instructions on setting the shared memory
parameters you may have a problem.
In the 'shmparam.h' file set SHMMAX to something smaller than 4G.
I just set mine to 2G or 0x7FFFFFFF and now it works fine.
I have done the Oracle 8.0.5 installation twice now on 2
different machines with success(1 Compaq Proliant 1500 -
RH5.2/2.0.36 kernel and 1 GW2K - RH5.2/2.2.1 kernel) I ran into
several problems along the way but all problems were solvable.
Mark
null -
Oracle10g on Fedora Core 3 - Universal Installer Won't Start
With all users, environment settings, and files configured as specified, I am attempting to run the Oracle Universal Installer for Oracle10g on Fedora Core 3. Every time I do this I get a series of messages and the installer is never run - please help! The messages are shown below.
Exception java.lang.UnsatisfiedLinkError: /tmp/OraInstall2005-02-24_12-53-02PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory occurred..
java.lang.UnsatisfiedLinkError: /tmp/OraInstall2005-02-24_12-53-02PM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1560)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1477)
at java.lang.Runtime.loadLibrary0(Runtime.java:788)
at java.lang.System.loadLibrary(System.java:834)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(NativeLibLoader.java:38)
at sun.awt.DebugHelper.<clinit>(DebugHelper.java:29)
at java.awt.Component.<clinit>(Component.java:506)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:189)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:173)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:182)
at oracle.sysman.oii.oiic.OiicInstaller.<init>(OiicInstaller.java:278)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:714)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:189)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:173)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:182)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:112)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:772)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
I have downloaded and installed the Java Runtime Environment from the Sun website, since I thought this could be the problem, but that didn't help. Any further thoughts...?
Thanks!Last week I installed the 10g (10.0.0.3) on Fedora Core 3 and the oracle instance is up running. ( I just installed Fedora Core 3 with CDs). There is the document I used http://www.puschitz.com/InstallingOracle10g.shtml.
===============================================
Fedora Core release 3 (Heidelberg)
Kernel 2.6.9-1.667 on an i686
login: oracle
Password:
Last login: Mon Feb 28 00:29:53 from home
[oracle@linuxdb ~]$ sqlplus /nolog
SQL*Plus: Release 10.1.0.3.0 - Production on Mon Feb 28 00:31:12 2005
Copyright (c) 1982, 2004, Oracle. All rights reserved.
SQL> connect system
Enter password:
Connected.
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Prod
PL/SQL Release 10.1.0.3.0 - Production
CORE 10.1.0.3.0 Production
TNS for Linux: Version 10.1.0.3.0 - Production
NLSRTL Version 10.1.0.3.0 - Production
SQL>
Maybe you are looking for
-
Modify posting period in KB65 - Internal Activity Allocation reposting
Hi Gurus, I have lots of documents originally created in CATS. The user who did the CAT7 transfer made a mistake and put in posting date (01.03.2010) on the selection screen of CAT7. All items have been posted on 01.03.2010 instead of the original da
-
ME21N:Enhancement of Purchase Order
Hi everyone, I want to update item of Purchase order without method 'process_item' in ME_PROCESS_PO_CUST. (I knew how to upate item of PO using process_item) But, for example, If I used MM06E005, I updated customer data only. I can't update item of P
-
tomorrow i buy MSI 890GXM-G65 and AMD Phenom II X4 840 AM3 3.2GHz 2MB Cache 45nm HDX840WFGMBOX no any information MSI 890GXM-G65 cpu support for phenom II X4 840 HDX840WFGMBOX msi offical site i waiting answer thanks S.
-
Conversion of a file with 2 converters in UCM / IBR?
Hi Folks, This might be a basic question, but would be helpful in making a key decision in our use case. Can we configure 2 conversions for a single file format? As we would like to convert each incoming jpeg file into PDF as well as getting the imag
-
Hyperion 7.0 Slow Performance
We are having very slow performance with Hyperion Report 7.0 running batches and reports. Has anyone else experienced this and had any success improving the performance?