Error in Activation of Data in DSO
Hi All,
Im working on a Flat file extraction on to a DSO. Data got Loaded successfully onto a DSO, but while activating the data, there is an error under SID GENERATION.
>Error when assigning SID: Action VAL_SID_CONVERT table ZTEST_CUST
>Value 'CustA' (hex. '4375737441') of characteristic 0APO_LOCNO contains invalid characters
>Process 000001 returned with errors
Could anyone help me resolve this?????
Thanks..
Hi
You can convert from lower case to upper case or
Flag the check box for "Lowercase letters" on info object 0APO_LOCNO
Hope this helps you....
Regards,
Rajesh.
Similar Messages
-
Error while activating the data into DSO
Hi
My base DSO is used to load 4 other data targets.
In process chain, after the base DSO gets activated there are 4 DTPu2019s running to load the data from base DSO to other DSO and 3 cubes.
When loading to other DSO, We have encountered an error
Object is currently locked by BI Remote
Lock not set for : Activating data in DSO
Activation of M records terminated.
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
2. What difference does it make when loading DSO to DSO and cube parallel?
Thanks
AnnieHi Annie.....
1. My question is when loading the data from base DSO to other objects , how does the lock mechanism works.
I know that we cannot load the data into base DSO, when base DSO is sending data into target.
Do you mean to say that the loading in the 2nd level DSO was successful .....but the activation failed ?
Have you checked in SM12 that whether that 2nd level DSO is somehow locked or not ?
Is any further targets getting loaded from this 2nd level DSO ?
Look suppose u r loading a DSO A.........and in the mean time some load starts from DSO A to some other target(it may be DSO or a cube).........then the activation in the DSO A will fail........because since the last request in the DSO A is not activated....that request will not get considered in the subsequent load....and since the load is already in progress....system will not allow to activate any new request......
Another option can be that DSO A is getting loaded from some other targets as well.......so since still some load is in progress in this target....it will not allow the activation....
So check it and atart the activation again..
2. What difference does it make when loading DSO to DSO and cube parallel?
The main difference is that there is no activation concept in the cube....so a cube may get loaded from several targets in parallel......
A DSO can also get loaded in parallel.......but activation should start once all the loads get completed successfully.....
Regards,
Debjani.... -
Error - While activation of Data in DSO
Hi Experts,
I'm facing following error message when tried to activate the data in DSO - The data went through fine in PSA and when triggered DTP to load data in DSO; the monitor showed green but when activated in DSO it's giving following error message. I transfered the global settings but facing the same following error message:
Diagnosis
An exception wrong_date was raised while executing function module
RST_TOBJ_TO_DERIVED_TOBJ .
System Response
Processing the corresponding record has been terminated.
Procedure
To analyze the cause, set a break point in the program of the
transformation at the call point of function module
RST_TOBJ_TO_DERIVED_TOBJ . Simulate the data transfer process to
investigate the cause.
Procedure for System Administration
Any idea that why it's generating this error message while activating data in DSO. I checked those records in error stack and seems to be a date issue but I checked the factory calendar and check the validity and that's fine and is within the factory calendar data range.
Thanks in advance - you response will be really appreciated.hi,
as you said the global settings were done,
try the global settings once again then delete the PSA(if records were less) nd load from source and then load to target.
this may solve if all settings were fine.
if records were huge in PSA, try correcting the records in error stack after allowing the good records to the target.
Ramesh -
Error while activating the Data in DSO
Hello,
We moved huge amount of FI data from datasource to DSO. After moving all the data, we tried to activate the data. But the mistake we did is we activated all the requests at one go. (my assumption) It turned all the request to Red. The job log says SQL error.
Is there any way of solving this issue without deleting the data. Data load will take too much time and we would like to avoid it if possible.
Waiting for inputs!!!
Regards,
Abhishekyes a Dump was triggered.
Database error text........: "ORA-12801: error signaled in parallel query
server P007#ORA-01652: unable to extend temp segment by 2560 in tablespace
PSAPTEMP"
Internal call code.........: "[RSQL/FTCH//BIC/AYEPSPFI140 ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"CL_RSODSO_ACTIVATE_REQUESTS===CP" or "CL_RSODSO_ACTIVATE_REQUESTS===CM00D"
"ACTIVATE_DATA_FROM_QUEUE"
Edited by: Abhishek Nishis on Oct 12, 2009 10:54 PM -
BI7.0 Hexdecimal values problem while activating the data in DSO
Hi Friends,
I've got the data upto PSA and i've run DTP also from PSA to DSO, but while activating the data in DSO from New Data Table to Active Data Table, it's giving the error given below:
Error when assigning SID: Action VAL_SID_CONVERT table
0DOC_HD_TXT
Value '1st disb' (hex. '00310073007400200064006900730062') of characteristic 0DOC_HD_TXT contains invalid characters
Process 000037 returned with errors.
it isn't accepting the values like with numberels and chars together
ex: 1st disb, 70 cr Gen Hsg.
I want the same to be in the report, how these are to be allowed?, i don't want to edit in PSA and there are a lot of values like that i can't edit all those, since there are thousands of records.
Regards,
BalajiReddyHi Anil,
Thanx for your quick replay, i've allowed ',' in RSKC and i've checked the check box LOWER CASE LETTERS for IO 0DOC_HD_TXT, the problem was almost solved out. What does ',' mean by?
Why lower case letter has to be checked only for this IO (0DOC_HD_TXT), not for others? if it is checked, it allows only lower cases, doesn't allow upper cases i think. won't there be any problem? if it is done like that?
pls tell me the reason, i'm really thankfull for your quick replay
Regards,
BalajiReddy -
Getting error during activation of data request in DSO.
Hello All
I am sending data in DSO by running DTP. evrythg goes in green . But as i try to activate the data request in DSO it is giving me error. Kindly tell the how to solve this.in log error meassage is like following .
Error while inserting data records for data package
Analysis of package terminated due to too many duplicates being found
Process 000000 returned with errors
Incorrect data records (duplicates) found
Data records are in the data package more than once.
regardsSaurabh
Sorry that option would only be available for Master Data Attrib /text.
Please check if the in DSO Settings ...Unique Data Records -
> Is this checked? if yes , you need to change it from DEV.
For a temporary solution, you need to find out which records are creating duplicate entries. If you can load them separately via some restriction in DTP , it would get loaded and then activate one request each time.
Whole objective is not have same Key combination more than once in a data package.
Try put a restriction on Update MOde i.e filter on Update Mode ( one by one X, blank, A, D, N etc) and see if you can load them.
Regards
Anindya -
Error while loading the data in DSO (Bi 7.0)
Hi Friends,
I am working on BI 7.0 , I had run a DTP to load the data in DSO from another DSO.but there was some error in tranformation because of which DTP request didnt terminate with either green or red . then I fixed the bug in TRX and rerun the request .Now there are two requests. Now i deliberately changed the QM Light of the earlier request to Red so that I could run another request. The other DTP success fully loaded the data in Activation Que of DSO . But when I tried to Activate the second request I got a message that request can not be activated because earlier request is yet to be activated.
now I tried to delete the earlier request .Neither its getting deleted nor am I able to change the QM Light to Green .
What should I do to activate the Successful request to load the data in DSO.
puzzeled !
AnuragHi,
I have a similar situation....
I load data from DSO 1 to DSO2....i run the DTP and look at the monitor after its green when i go to manage and activate i am seeing two requests instead of 1...i am not sure why...Can you guys tell me if there is any setting that needs to be taken care of.
Thanks,
Vinay. -
Error while Activating ODS data
Hi Experts,
I am getting following error while Activating ODS Request.
Job started
Step 001 started (program RSODSACT1, variant &0000000000142, user ID lsingh
Activation is running: Data target ZINV_MAT, from 7,883 to 7,883
Data to be activated successfully checked against archiving objects
SQL: 10/17/2005 21:04:17 lsingh
ANALYZE TABLE "/BIC/AZINV_MAT40" DELETE
STATISTICS
SQL-END: 10/17/2005 21:04:17 00:00:00
SQL: 10/17/2005 21:04:17 GOELA
BEGIN DBMS_STATS.GATHER_TABLE_STATS ( OWNNAME =>
'SAPIBD', TABNAME => '"/BIC/AZINV_MAT40"',
ESTIMATE_PERCENT => 1 , METHOD_OPT => 'FOR ALL
INDEXED COLUMNS SIZE 75', DEGREE => 1 ,
GRANULARITY => 'ALL', CASCADE => TRUE ); END;
SQL-END: 10/17/2005 21:04:17 00:00:00
ABAP/4 processor: DBIF_RSQL_INVALID_RSQL
Job cancelled
It's giving DBIF_RSQL_INVALID_RSQL error.
I am loading full upload to the ODS first time.
Any answer will be greatly appreciated.
Regards,
LShi LS,
yes contact basis is the right way
try to double click the DBIF_RSQL_INVALID_RSQL if you interest with more detail error info, by viewing the short dump (transaction st22 can be used), transaction sm21 may also helpful, if authorization is granted. -
Error While Activating the Data Source in RSA5 T-Code
Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar. -
Error while activating Transactional data source
I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth. -
Error on activation of data records from ODS object
hi,
Kindly help with my BW Problem, the error occured on the
activation of ODS. The error says "<i>Request
REQU_43MNOPW29W4F5M037J7OAFP52 in ODS ZPUR_O01 must have QM
status green before it is activated</i>" and "<i>Activation of data
records from ODS object ZPUR_O01 terminated</i>"
I tried to check the data in the ODS Object by choosing
<LS>Administrator Workbench > data targets > context menu on ODS
Object ZPUR_O01 but the status are green and when i tried to
activate it the logs says "<i>ODS object ZPUR_O01 was built
incorrectly. Cannot update request
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
ODS object ZPUR_O01 was built incorrectly. Cannot update request
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
Data to be activated successfully checked against archiving
objects
Activation of data records from ODS object ZPUR_O01 terminated</i>"
Please help me with this problem.Hi Jay
U need to update these requests to ODS
REQU_43MODQ3GF69X17B71ZKQMN85I(20,154)
REQU_43MQ8A8F0L1US5COQTUUWX3BA(20,155)
REQU_43MQ8OQQTY21YQ37RMA1WMO06(20,156)
1) delete the current request
2)Reconstruct the requests above three request
3)and then Load the current reqest (REQU_43MNOPW29W4F5M037J7OAFP52)
Then only u will be able to activate the ODS....
This is an serialization issue...
hope it helps
regrds
AK
assign points if usefull -
Error - When Activating Generic Data source in BW DEV
Hi,
I am working in BI 7.0
I created a Generic Data source
I had checked in RSA3 , it is showing records too.
i replicated the Datasource in BW
Datasource is available in BW
Then I try to activated the Datasource
because
when i try to create tranformation for the data source then
It will show this message (and transformation is not created)
<b>Source RSDS ZCOPC_C10 GDVCLNT110 does not exist</b>
My Data source name is ZCOPC_C10 for source system GDVCLNT110
then I will try to Activated the Data source First
then also it will show the Error like this
Post Processing/Checking the Activation for DataSource ZCOPC_C10 GDVCLNT110
<b>&
Error when activating DataSource ZCOPC_C10 GDVCLNT110</b>
and the
DataSource ZCOPC_C10 (GDVCLNT110) could not be activated
can some body help me to solve this problem
sure you can get the points
Thanks
prasannaHi Oscar,
The Data source is not Active in BW, I had checked in Data source defination.
when I activate the Data source .
<b>I received the Message / Error</b>
Activation of Objects with Type DataSource
Saving Objects with Type DataSource
Internal Activation (DataSource )
Preprocessing / Creation of DDIC Objects for DataSource ZCOPC_C11 GDVCLNT110
Save DDIC object /BIC/CAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCAZCOPC_C000020000001 (Application Structure for ZCOPC_C11 GDVCLNT110 - T)
Save DDIC object /BIC/CAZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Appli)
Save DDIC object /BIC/CCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110)
Save DDIC object /BIC/WCCZCOPC_C000020000001 (Character Structure for ZCOPC_C11 GDVCLNT110 - Tab)
Save DDIC object /BIC/CCZCOPC_C00002000 (Segment Structure for ZCOPC_C11 GDVCLNT110 - Chara)
Save DDIC object /BIC/B0001051 (PSA for ZCOPC_C11 GDVCLNT110 Itemization)
Writing of object catalog entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCAZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CAZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TTYP /BIC/WCCZCOPC_C000020000001 written to the ObjectCatalog (TADIR)
Object TABL /BIC/CCZCOPC_C00002000 written to the ObjectCatalog (TADIR)
Activate all Dictionary objects ( 6 ):
All DDIC objects have been activated / deleted
<b>Post Processing/Checking the Activation for DataSource ZCOPC_C11 GDVCLNT110
Error when activating DataSource ZCOPC_C11 GDVCLNT110</b>Deletion of Unused Dictionary Objects ( 6)
All DDIC objects have been activated / deleted
Deletion of Object Catalog Entries (TADIR)
Object TABL /BIC/CAZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCAZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CAZCOPC_C00002000 deleted from TADIR
Object TABL /BIC/CCZCOPC_C000020000001 deleted from TADIR
Object TTYP /BIC/WCCZCOPC_C000020000001 deleted from TADIR
Object TABL /BIC/CCZCOPC_C00002000 deleted from TADIR
All unused DDIC objects have been deleted
Thanks
prasanna -
Error when updating the data from DSO to cube
Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
AnnieHi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha -
Error while activating the request in DSO
Hi all,
I had loaded the data into the DSO from another DSO.
The load is compeleted successfully and the data came to the new data table, but when i activate the request it turns to red, giving some error that sid has changed. what may b the reason for this
ThanxHi,
check threads
ODS Object Activation SID changed
Error in assigning SID and activation of ODS
Maybe this helps.
Regards,
Arek -
Error while deleting the data from DSO
Hi Experts
I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
" An entry was to be entered into the table
"\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
had a unique table key (UNIQUE KEY)).
However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
initial lines into a table with a unique key. "
I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
Regards,
MaheshHi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani.....
Maybe you are looking for
-
Multiple VI on a Single Front Panel
Probably a simple question but I'm having trouble figuring out how to do it. First, I have LabView 2010, Professional Development System I have been trying to learn LabView the hard way. I've been reading the documentation, starting with Getting Sta
-
Issue on Purchase order creation with Delivery schedule line items per PR
Hi Note->Developed inbound FM to create PO's in SAP through IDOC. We are creating purchase orders from vendor which is coming from Inbound IDOC. Here we are using as BAPI_PO_CREATE1 to create PO's. before that i am passing all the inbound data of the
-
how can I connect two thunderbolt monitors to my macmini in windows 8 and bootcamp? Works fine in OSX
-
Urgent!!! Need help with ADF 11g app deployment
Hi, My application is designed using ADF 11g and am using adfc-config.xml for page flow. Through Jdev 11g integrated WLS server the application is running smoothly. But when i deployed application using EAR file on WLS 11g server and accessed the app
-
Java script and password request
Hi, this is my husband's play book and he is having a couple of problelms with it at the moment.. 1.First: When he tries to load a paticular app, he gets a java script error "null" message..I loaded the same app on my phone (Galaxy S III) and it wor