Error in adapter configuration

Hi folks,
I get an error saying:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '0227331228')', probably configuration error in file adapter (XML parser error)': java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Consistency error: more fields found in XML structure than specified in conversion parameters! (Value '0227331228')', probably configuration error in file adapter (XML parser error)'.
But i dont find more fields defined in the datatype or in the content conversion during adapter configuration
Kindly help me on this

hi,
i think you have hierarchy structure in the adapter level.
Like
 <Details>
 <Employee Details>
 <Name>
 <Id>
 <Company Details>
 <Name>
 <Id >
If you have like this then just add Details.field Separator 'nl'.
*Reward Points If Useful*
Regards,
Prakasu

Similar Messages

Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
ErrorCode: -17600,
Failed to load a required step's associated module.
LabVIEW Run-Time Engine version 9.0.1f3.
When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
My TestStand Engine Version is 2012 f1 (5.0.0.262).
I'd appreciate any help on this issue.
Roman

Hi Roman,
There are a couple of things you can try:
1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
Check if the simple VI is loadable and runs without errors in TestStand.
If the step generates the same error, you should try a re-install of the LabVIEW development system.
If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
    Right-click "Build Specifications" and choose "New->Application(EXE)".
    In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
    Save the properties.
    Right-click on the newly created build specification and choose Build.
Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
Regards,
TRJ

Sender Mail Adapter Configuration error

Hi,
I am working on scenario mail adapter to CRM system. And when I tried to configure the sender email adapter I have got the error following error, Can any one help me to resolve this issues
error occured: exception caught during processing mail message; java.net.ConnectException: Connection refused
the details I have provided are as follows
Transport protocol is POP3
URL - POP://mailservername/Inbox/folder
And I have tried with the IMAP4 also
URL - IMAP://mailservername/Inbox/folder
And we have cross checked that the XI server is able to ping that particular mail server.
Regards,
Venkat.

Hi Venkateswara,
I would suggest that you go through these to know how to configure your sender mail adapter,
<a href="/people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step mail adapter step by step</a>
<a href="/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure adapter Scenario</a>
Also, to know the various parameters of a sender mail adapter, just go through this link,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm">Configuring sender mail adapter</a>
Check your mail adapter configuration against these details. Also, check if the mail server you are trying to access is running.
Also go thru this pdf to make yourself more comfortable with mail adapters.
https://websmp205.sap-ag.de/~sapidb/011000358700004556712005E/HowTo_Mail_Adapter2.pdf
Regards,
abhy

Error in Adapter Table Adapter Configuration IDM - Oracle 10g

Error in the configuration of Oracle Database Table Adapter Configuration.
Log:
2007-10-02 10:26:40,843 INFO [DBADAPTERLOGGER] DBProvisioner::createUser : DBProvisioner::createUser : userProperties is xel_usr_id#:#V04#;#xel_usr_password#:#56pddssd#;#xel_usr_status#:#1#;#xel_usr_first_name#:#Juana#;#xel_usr_last_name#:#Rengifo#;#xel_usr_group#:##;#xel_usr_title#:#Analista#;#xel_usr_dept#:##;#xel_usr_comm_lang#:##;#xel_usr_logon_lang#:##;#xel_usr_email#:[email protected]#;#xel_usr_tel_no#:#111-222-4444#;#xel_usr_time_zone#:##;#xel_usr_date_fmt#:##;#xel_usr_dec_ntn#:##;#xel_usr_role#:#System Admin
2007-10-02 10:26:40,859 INFO [DBADAPTERLOGGER] DBProvisioner::createUser : Starting time for createUser method :1191346000859
2007-10-02 10:26:40,875 ERROR [DBADAPTERLOGGER] DBSchemaErrorHandler::error : ERROR : 1:227cvc-elt.1: Cannot find the declaration of element 'xl-ddm-data'.
org.xml.sax.SAXParseException: cvc-elt.1: Cannot find the declaration of element 'xl-ddm-data'.

Based on your error a few questions come to mind...
What does your Configuration XML file look like? It's root XML node should be xdb_app_map. Your error makes me think you may be pointing at an adapter file versus db schema mapping file.
Are you starting from one of the provided examples like OraApp1.xml? If you followed Step 3: the connector file copy instructions during deployment, you should find the samples in "OIM_home/xellerate/XLIntegrations/DBAppTables/xml/DB_Schema" Or you can search for OraApp1.xml or OraApp2.xml.
Have you configured your IT Resource with the appropriate path to the XML file? If you are on Unix it's going to be case sensitive, I can't speak for a windows path.
I hope this helps. I know I had a few challenges myself when I first took a swing at the DB Table Adapter from the 9.0.4.1 connector pack.
regards,
Jason

JDBC Adapter configuration not initialized Error

Hi,
I am doing a RFC to JDBC scenario in PI 7.1. I am getting the following error:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: JDBC Adapter configuration not initialized: null
In communication channel monitoring, it shows the following,
Error when attempting to get processing resources: com.sap.aii.af.lib.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL '<URL>': SAPClassNotFoundException: com.ibm.as400.access.AS400JDBCDriver
The JDBC parameters for driver & connection are correct only.
Is the problem related to deployment of JDBC driver or something else? How can i ensure that the JDBC driver deployment is succesful in PI 7.1?
Edited by: senthil nathan on Mar 25, 2009 10:57 AM

Hi Senthil,
Your drivers are not installed properly. Please re-deploy them through SDM.
Regards
joel

Error in JMS Adapter Configuration...Pls help..

Hi,
My scenario is that FTP->MQ Queue->Local JMS Queue->XI.
MQ Queue has successfully picked up the files from FTP and posted successfully into Local JMS Queue. But XI is unable to pick them up from Local JMS Queue.
It is giving the following error:-
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2005: failed to create MQQueueManager for '153.88.140.28:ESEALMW303'
Here are the details what I enetered in the Sender JMS Adapter Configuration:-
Transport Protocol-> WebsphereMQ(Non JMS)
QueueConnection Factory Java Class-> com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java Class->com.ibm.mq.jms.MQQueue
IP address:            153.88.140.28
Server port:            1414
Queue Mgr name ESEALMW303
Channel name        MQMA_ESEALMW303_1
JMS queue            EAB_MDMTOCBS_LQ01
Any help would be appreciated

Soumya,
Refer Abhy's reply in the below thread
XI JMS error MQJMS2005 : failled to create MQQueuemanager for ....
raj.

Network adapter configuration error after quick migrate of stopped VM in 2012 r2 data-center edition 3 node cluster environment

We've got a couple of Windows 2012 r2 / Hyper-V 3 node clusters, and I have a problem with network adapters on them.
I have 3 node cluster all vm running fine on node 1 and 2 also quick and live migration very good between
node 1 and node 2, but no vm migrating on node 3. show "Network adapter configuration error".
If the VM is powered off, and I move it to 3rd
host (quick migration via Failover Cluster Manager), the network adapter loses its connection to the virtual switch - it turns to "Configuration Error"..if
manually change V switch of every VM then it worked only on 3rd node, and having same problem on node 1 and 2.
Quick migrate with the power off, and it fails to pick up the VSwitch on the3rd host.
Thanks
Shipon

Hi,
> I created a new VM via the Failover Cluster Manager (ie not via Hyper-V manager on one of the nodes).
Generally, this issue happens if a network adapter is added or removed on a highly available virtual machine using the Hyper-V manager console. Since the Hyper-V Manager console is not cluster aware, which means that configuration changes that are made to
virtual networks or virtual machines in the Hyper-V Manager console must be replicated to the other cluster nodes by using the “refresh virtual machine configuration” option in the Failover Cluster Manager console.
I know that “refresh virtual machine configuration” option is not needed if you change virtual machine settings using the Failover Cluster Manager console, but you may try to refresh the configuration of virtual machine to check the result.
In the Failover Cluster Manager console, expand Services and Applications, and then click the virtual machine for which you want to refresh the configuration.
In the Actions pane, scroll down, click More Actions and then click Refresh virtual machine configuration.
For more information please refer to following MS articles:
Refresh the Configuration of a Virtual Machine
http://technet.microsoft.com/en-us/library/dd759135.aspx
Highly Available Virtual Machines Lose Configuration Settings after Failover in Windows Server 2008 Failover Clusters
http://support.microsoft.com/kb/2000016
Hyper-V Live Migration fails on Windows Server 2008 R2 with Event ID 12080
http://support.microsoft.com/kb/2592237
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support

Error in importing Configuration objects of PI 7.0 to PI 7.1

Hi All,
My server is upgraded from PI 7.0 to PI 7.1.
I am getting Error while importing Configuration objects of PI 7.0 to PI 7.1 now.
Pls see the below error
Attempt to access the 1 requested objects on 1 failed. Detailed information: com.sap.aii.ib.core.roa.RoaObjectAccessException: Attempt to read object Adapter Metadata Mail | http://sap.com/xi/XI/System, type AdapterMetaData from application REPOSITORY on system REPOSITORY failed. Object does not exist. Detailed informatio n: Software component version with key ID: b38bcd00e47111d7afacde420a1145a5 not found
Pls suggest

Hi,
It seems that adapter metadata has not been loaded into integration repository and because of that when you are trying to import configuration objects in ID then you are getting the error.
The SAP adapter metadata objects are located under the namespace http://sap.com/xi/XI/System of software component SAP BASIS.
What you can do is, if you have installation dvd's then you can copy from their or you can simply [_DOWNLOAD_|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ] from sap market place (refer this [thread|how to import Adapter metadata;) (you must have S-user id for this) and then after you need to do as mentioned below...
1. First unzip the file (if it is zipped) and then put it in the import directory: \usr\sap\<SID>\SYS\global\xi\repository_server\import\
2. Now login to IR and then from menu TOOLS ---> Import design objects and import it.
3. After that in ID, Environment ---> Clear SLD Data Cache
4. Now you can try to import configuration objects...
Regards,
Sarvesh

SOAP receiver adapter configuration issue

Hi Everyone,
When I am trying to excute a sync scenario from SAP<>XI<>Webservice from Integration engine , I am getting the below error message.
Error while sending message: com.sap.aii.af.ra.ms.api.DeliveryException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 415 Cannot process the message because the content type 'text/xml; charset=utf-8' was not the expected type 'application/soap+xml; charset=utf-8'.
In the receiver SOAP adapter, I have configured Transformation module where I kept the MessageTransformationBean in processing sequence as a priority and also provided the module configuration.
ModuleKey: transform
ParameterName: Transform.ContentType
Parameter Value: application/soap+xml;charset=utf-8.
But still get the above error message in the communication channel. I am using certificates in my configuration that were deployed in visual Admin.
In the adapter configuration, I have just provided the Target URL, Configured User Authentication, certificate authentication and SOAP action.
Can anyone help me.. how to rectify the issue.....
Thanks in advance,
Hareen

HI Hareen,
I decided to give SOAP1.2 using the standard SOAP Adapter a try
There are a few noticeable differences between the request message of SOAP1.1 and SOAP1.2
1.) SOAP 1.1 uses a different namespace from SOAP 1.2. For SOAP 1.1 it is "http://schemas.xmlsoap.org/soap/envelope/" while for SOAP 1.2 it is "http://www.w3.org/2003/05/soap-envelope".
2.) SOAP 1.2 does not use SOAPAction in its header.
3.) Content type is also different, for SOAP 1.1 it is "text/xml" while for SOAP 1.2 it is "application/soap+xml"
So a sample request for SOAP 1.1 would be like this:
Content-Type: text/xml;charset=UTF-8
SOAPAction: "http://sampleaction"
While for 1.2 it is:
Content-Type: application/soap+xml;charset=UTF-8;action="http://sampleaction"
The SOAP action is moved to the content type (experts please correct me on this).
Based on the differences, you need:
1.) Construct the correct SOAP Envelope for request message mapping and remove it for the response mapping
2.) Use MessageTransformBean to change content type
3.) Leave SOAPAction as blank
I think dynamic soap action is no longer possible because the action is hardcoded in the module configuration (please correct).
Hope this helps,
Mark

JDBC Adapter configuration not initialized:null

i
we have a synchronous scenario with the following adapters , RFC <> XI <> JDBC.
1.JDBC Driver installation is done
2.RFC Destination type t is done in sap(sender) system.
3.checking the jdbc in VA is done
while running it is giving the following error.
com.sap.aii.af.ra.ms.api.RecoverableException: JDBC Adapter configuration not initialized: null
where we have to initialize JDBC Adapter configuration
Thanks in advance
Prasad Nemalikanti

hi prasad
There are 2 jar files that may be missing from your SQL JDBC driver --> msbase.jar and msutil.jar, I think once you add these to the driver it might work.
also check the driver string for the SQL driver 2 parameters
i.e 'com.microsoft.jdbc.sqlserver.SQLServerDriver' now becomes
'com.microsoft.sqlserver.jdbc.SQLServerDriver'
This will solve your problem
follow this link
Re: MS SQL Server jdbc Driver installation on XI .
XI JDBC Adapter using stored procedures
thanks
sandeep
Reward points if helpful

Graphic Mapping:IDOC to File-Avoid Error in Adapter Engine

Hi all,
I'm using Graphic Mapping in my IDOC to File scenario in which each segment in source IDOC will generate a ROW in target File with the condition: DATBI >= currentdate (and some other conditions)
I have a UDF and use the mapping function CREATEIF for this purpose:
DATBI -> UDF -> CREATEIF -> ROW
Problem scenario: In the source IDOC if all the segments have DATBI < currentdate then there is no ROW created, and I get the error in Adapter Engine
Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure ...
How can I avoid this?
I've tried to put this condition using XPATH in Interface Determination and got the error.
There is a way to use function current-date() in XPATH condition?
Thanks for your help,
Elaine

Hi all,
How can I "suppress the row node if condition fails"? I'm new in PI, so please give more details.
My FCC as follows:
Record Structure: Record, Row
Row.addHeaderLine 0
Row.fieldSeparator ,
Record.fieldSeparator 'nl'
Row.endSeparator ; 'nl'
It works fine if the condition satisfied.
In Message Mapping, I've use Test to double check my mapping, and in the scenario that conditions fails, there is no Row in the target message.
Please advise.
Thanks,
Elaine

Reg: Error in adapter Engine Monitoring

Hi Guys,
In my RFC to File Scenario i got error as Adapter message property was configured was mandatory element but there is no Dynamic ocnfiguration elementin XI MEssage Header. This is occur in adapter engine monitoring in RWB.
Thanks

This error comes if you there is a problem in passing the file via dynamic configuration
for this if you want temporary solution like filename not necessarily be dynamic then go to receiver file adapter then
adapter specific message attributes deselect filed Failif file name does not.... sme option where you can uncheck the failure option
and in this case need to provide the filename and file will get generated with this filename if there is no filename generates using dynamic configuration
for this to resolve permanently then check the filename is passed or not to file adapter in moni in dynamicconfiguratuoin tab of callAdapter pipeline service
HTH
Rajesh

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use service=<SENDERSERVICE>instead of
bs=<SENDERSERVICE> parameter in your URL.
bs is replaced by service in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?service=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

JDBC Adapter configuration not initialized

Hi,
I have tested one scenario for WebService to JDBC. Integration engine shows success message.But i got some error in Adapter engine. It shows "JDBC Adapter configuration not initialized".
So, plz anyone give the solution for this problem.
Regards
Vijay

Hi,
1.Check whether the JDBCAdapter is Activated.
2.Check if any firewalls are there frm client side and open
3.Check the password used to connect the Database is correct one.
If all these are fine..do the complete cache refresh once.
Please award marks if found useful.
Thanks
Hamja

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

Error in adapter configuration

Similar Messages

Maybe you are looking for