Errors in assets

friends,
after running depriciation run successfully, system is showing "  Errors occurred when processing assets. See the Error Log  " in asset balance report 87011963.
when we go through the errors in assets all are showing the following error message.
Line item causes scrap value of    199,16 to be violated
Message no. AA632
Asset affected: 1XXXXXXXXXX-0
Diagnosis
The book value of the asset is below the the cut-off value in the amount of    199,16.
Procedure
Check your entries for the amount, transaction type and cut-off value specifications, such as memo value, scrap value or cut-off value percentage rate.
i am not able to understand the issue, please suggest,
regards,

Hi,
Go to T.code OAYI and check what u have defined as the memo value(retention amount) for each depreciation area/ company code.  This memo value is the amount that is not depreciated, in order to have a memo posting for an asset, which has already exceeded its useful life.  The system reduces the planned annual depreciation in the acquisition year for the asset by the amount of the memo value.
     You can activate or deactivate the memo value by means of an indicator in the asset class, although it has been defined on depreciation area/company code level (this is applies especially to asset classes for low value assets).
Rgds
Nikhil

Similar Messages

  • Error in asset management config area

    Hi
    I got error in asset management configuration area error is ASSERTION_FAILED. How to rectify this error,  if any one knows please post the solution.

    Can you give what you are doing in config and the long error text with error number

  • Error Deserializing Asset during CSDT Import

    Hi,
    I am trying to import content into a freshly installed web center sites system. I am getting the below error when I try to import few assets. Apparently, the error is displayed only when the asset is dependent on a Media_C asset.
    The exact error which is displayed is:
    Error while importing: Import Error: Error deserializing asset
    com.fatwire.cs.core.realtime.DataException: Error deserializing asset
           at com.fatwire.rest.util.AssetJAXBDeserializer.execute(AssetJAXBDeserializer.java:69)
           at com.fatwire.realtime.DefaultDeserializerImpl.execute(DefaultDeserializerImpl.java:163)
           at com.fatwire.realtime.packager.CSDTUtil._import(CSDTUtil.java:474)
           at com.fatwire.realtime.packager.CSDTUtil.Import(CSDTUtil.java:360)
           at com.fatwire.csdt.service.impl.ImportService.importData(ImportService.java:227)
           at com.fatwire.csdt.service.impl.ImportService.execute(ImportService.java:88)
           at jsp_servlet._jsp._cs_deployed._openmarket._xcelerate._prologactions._publish._csdt.__csdtservice._jspService(__csdtservice.java:223)
           at weblogic.servlet.jsp.JspBase.service(JspBase.java:35)
           at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
           at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:184)
           at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
           at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
           at COM.FutureTense.Servlet.ServletRequest.include(ServletRequest.java:1410)
           at COM.FutureTense.Servlet.FRequestObj.include(FRequestObj.java:1429)
           at COM.FutureTense.Servlet.JSPServices.runJSP(JSPServices.java:111)
           at COM.FutureTense.Platform.FileSystem.FILESYSTEMJSPManager.runJSP(FILESYSTEMJSPManager.java:463)
           at COM.FutureTense.Servlet.JSPServices.runJSPObject(JSPServices.java:50)
           at COM.FutureTense.Platform.FileSystem.FILESYSTEMJSPManager$JSPDataFile.run(FILESYSTEMJSPManager.java:190)
           at COM.FutureTense.Common.ContentServer.jspExecute(ContentServer.java:3027)
           at COM.FutureTense.Common.ContentServer.evalTemplate(ContentServer.java:2621)
           at COM.FutureTense.Common.ContentServer.generatePage(ContentServer.java:1640)
           at COM.FutureTense.Common.ContentServer.evalPage(ContentServer.java:1276)
           at COM.FutureTense.Common.ContentServer.execute(ContentServer.java:465)
           at COM.FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)
           at COM.FutureTense.Servlet.FTServlet.doPost(FTServlet.java:62)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
           at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
           at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
           at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at com.fatwire.auth.RequestAuthenticationFilter.doFilter(RequestAuthenticationFilter.java:193)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at COM.FutureTense.Servlet.URLRewriteFilter.doFilter(URLRewriteFilter.java:82)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:701)
           at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at com.fatwire.cs.ui.framework.UIFilter.doFilter(UIFilter.java:109)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
           at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
           at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
           at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
           at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
           at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
           at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
           at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
           at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
           at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Caused by: java.lang.NullPointerException
           at com.fatwire.assetapi.data.AssetDataImpl._getParentDef(AssetDataImpl.java:175)
           at com.fatwire.assetapi.data.AssetDataImpl.setParents(AssetDataImpl.java:153)
           at com.fatwire.rest.util.AssetHandler.getAssetData(AssetHandler.java:793)
           at com.fatwire.rest.util.AssetHandler.getAssetData(AssetHandler.java:668)
           at com.fatwire.rest.util.AssetJAXBDeserializer.execute(AssetJAXBDeserializer.java:64)
           at com.fatwire.realtime.DefaultDeserializerImpl.execute(DefaultDeserializerImpl.java:163)
           at com.fatwire.realtime.packager.CSDTUtil._import(CSDTUtil.java:474)
           at com.fatwire.realtime.packager.CSDTUtil.Import(CSDTUtil.java:360)
           at com.fatwire.csdt.service.impl.ImportService.importData(ImportService.java:227)
           at com.fatwire.csdt.service.impl.ImportService.execute(ImportService.java:88)
           at jsp_servlet._jsp._cs_deployed._openmarket._xcelerate._prologactions._publish._csdt.__csdtservice._jspService(__csdtservice.java:223)
           at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
           at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
           at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
           at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:523)
           at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
           at COM.FutureTense.Servlet.ServletRequest.include(ServletRequest.java:1410)
           at COM.FutureTense.Servlet.FRequestObj.include(FRequestObj.java:1428)
           at COM.FutureTense.Servlet.JSPServices.runJSP(JSPServices.java:111)
           at COM.FutureTense.Platform.FileSystem.FILESYSTEMJSPManager.runJSP(FILESYSTEMJSPManager.java:463)
           at COM.FutureTense.Servlet.JSPServices.runJSPObject(JSPServices.java:50)
           at COM.FutureTense.Platform.FileSystem.FILESYSTEMJSPManager$JSPDataFile.run(FILESYSTEMJSPManager.java:190)
           at COM.FutureTense.Common.ContentServer.jspExecute(ContentServer.java:3027)
           at COM.FutureTense.Common.ContentServer.evalTemplate(ContentServer.java:2621)
           at COM.FutureTense.Common.ContentServer.generatePage(ContentServer.java:1640)
           at COM.FutureTense.Common.ContentServer.evalPage(ContentServer.java:1276)
           at COM.FutureTense.Common.ContentServer.execute(ContentServer.java:465)
           at COM.FutureTense.Servlet.FTServlet.execute(FTServlet.java:129)
           at COM.FutureTense.Servlet.FTServlet.doPost(FTServlet.java:61)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
           at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
           at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
           at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
           at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
           at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
           at com.fatwire.auth.RequestAuthenticationFilter.doFilter(RequestAuthenticationFilter.java:193)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
           at COM.FutureTense.Servlet.URLRewriteFilter.doFilter(URLRewriteFilter.java:81)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
           at com.fatwire.wem.sso.cas.filter.CASFilter.doFilter(CASFilter.java:701)
           at com.fatwire.wem.sso.SSOFilter.doFilter(SSOFilter.java:51)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
           at com.fatwire.cs.ui.framework.UIFilter.doFilter(UIFilter.java:108)
           at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    ... 9 more
    If I delete the dependent Media_C asset, it gives an error saying Media_C does not exist in the datastore. I am unable to identify the root cause of this error.
    Any help on this would be great. Thanks in advance.

    Hello,
    Can you create assets manually through a start menu in the target environment?
    I see this error
    Caused by: java.lang.NullPointerException
           at com.fatwire.assetapi.data.AssetDataImpl._getParentDef(AssetDataImpl.java:175)
    Do you find the Content and Parent Definitions is the environment?
    Best regards,
    Gerardo

  • Content generation error. [Error: invalid asset]

    I'm am trying to add an article to a Folio and am getting "Content generation error. [Error: invalid asset]. I have re-imported all of the files in the article. I'm stumped. Anyone have any ideas?

    Hm. Might be that the two errors are of a different kind:
    [Error: Invalid asset] vs. [Error: Invalid asset location].
    I have an error with a simple image I want to use with "Pan and Zoom" ("Schwenken und Zoomen" in my German InDesign CS5.5 v7.5.2 on OSX 10.6.8).
    The error message translates to "[Error: Invalid asset]":
    After a bit of experimenting I think I know why there was an error.
    My first attempt was on an TIFF image (=> ERROR), then I tried with a JPEG version (NO error).
    Too bad Overlay Creator cannot detect wrong file formats for the given task.
    Uwe

  • Error during Asset Scrapping using ABAVN - plz advise

    Dear all,
    Facing an error during asset scrapping using ABAVN for a Korean company code.
    Net value of asset is not zero. Transaction type = Disposal/abandonment of prev. year acquisition.
    Error occurs on Simulation - Transaction in area 40 contradicts the net book value rule
    NBV in area 01 Book Dep -  108,612,225 KRW
    NBV in area 40 u2013 Tax Dep u2013 108,612,192 KRW
    Negative vals allowed NOT checked in asset master.
    SAP says:
    The document cannot be posted, as it is contrary to the net book value rule which is checked in area 40.
    This error usually occurs when you enter proportional values. The proportional values exceed the amount posted, for example, post capitalization of 100 but proportional depreciation to the amount 110. Check your entries and correct them if necessary.
    How do we correct this issue and scrap the asset? Is this specific to Korea? How can we make NBV in area 01 = area 40?
    Any clues? Greatful for all answers
    Cheers
    RK

    Kindly read the forum rules and then post.
    SMS Language is strictly not allowed.

  • Pan And Zoom Overlay Content Generation Error Invalid Asset

    I am attempting to create a Pan AND Zoom overlay, I can get the overlay to work if I choose Pan only, but if I choose Pan AND Zoom and then go to preview, I get the following error: "Content Generation Error: Invalid Asset". Any ideas? I am using V17 of the tools, (the latest before todays update)

    What image file format are you trying to turn into a Pan-and-Zoom overlay?? I encountered this error last night (I found this thread while searching here for "Invalid Asset"), and determined that it was because I had placed a .PSD file. Once I converted the image to JPG, I got it to work.

  • Scrollable Content article gets [Error: Invalid asset location]

    I'm trying to create a wide scrollable content product timeline.
    The Content  on the "Scrollable Content" layer is 3024x600
    Content is grouped text and image boxes
    Container frame on Layer 1 is 975x600
    Both Content and Containerhave the same name and are aligned along the left edge
    When I update the folio I get the following error:
    Content Generation Error
    [Error: Invalid asset location]
    Trying to preview in the desktop viewer gets the same error.
    Looking at the links tab, there are no missing or flagged files, and all the files exist within the article's links folder.
    What am I missing here?

    looks like you are okay on the folio builder panel (first line)
    but you are still on version 18 of the producer tools. make sure to have
    the latest version of the folio producer tools (separate installer)
    installed. maybe uninstall previous version.
    http://caniupdateadobedps.com/
    —Johannes

  • Error in Asset A/c Determination

    Hi all,
    I already created asset in Accont determination (111) which is assigned to Asset Class. Now I need to assign GL a/c(222) to DP Acq. in Tcode- OA90. But I am getting an error as below:
    "Account 300 not yet defined as reconciliation account in co. code PP"
    But i created GL a/c(222) as recon a/c, i did not assigned earlier, now it is not accepting
    <b>Case-2:</b>
    Due to the above error, i tried to assign another GL a/c (333), but showing error that
    "You no longer change the value 222 for the GL a/c"
    You tried to change GL a/c 222. However, assets were already created with an a/c determination that includes this a/c.
    You can only change GL a/c in the a/c deterination as long as there is no asset that uses this a/c.
    If you want to change the a/c, you have to enter a new a/c deterination containing the hange a/c.
    URGENT PLEASE
    Rgds
    sunfico

    Hi,
    Good morning and greetings,
    Please check up the same in OAMK.
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Java web start error running Asset Editor or any jnlp page

    When I try to launch Asset Editor or Import/Export or any of the jnlp pages that runs using Java Web Start, I get an error. Java 7 Web start starts but It throws “Could not connect to Server. Please check your Java Web Start and Browser proxy settings”.
    I read conflicting opinions on the internet as to what version of JRE/JDK is needed and potentially some issues running Java Web start with Java 7. I have 64-bit java 1.7.0_45 JDK/JRE installed and no other version. I tried installing 32-bit 1.7.0_45 as well. I have tried to run it from 32-bit as well as 64-bit browser also. All situations provide the same error.
    However, when I install JRockit, it seems to work fine. But we cannot use jrockit. We have to use IBM JDK/JRE 7 eventually. Currently, the java web start does not work on Oracle Java as well as IBM JRE.
    Any help is much appreciated.

    I found a solution for this problem. We have to apply patch 17634436.
    https://support.oracle.com/epmos/faces/ui/patch/PatchDetail.jspx?_afrLoop=149081897091441&patchId=17634436&_afrWindowMode=0&_adf.ctrl-state=xfsajjmff_74
    Just thought it will be useful for anyone encountering this problem.

  • Error in Asset Transactions Report in ECC 6

    Hi Friends,
    We have upgraded from ECC 4.7 to ECC 6.0 in Nov 2007.
    In Asset Transactions Report (S_ALR_87012048) the Depreciation column is displaying Zero Values for individual line items after November 2007 (ie for Assets posted after Nov, 07).
    We posted the same to SAP and they are saying that since New Depreciation Calculation has been activated, Depreciation on Individual transactions will not be calculated.
    SAP has quoted the following note:
    As per note 965032 point 4d under the header 'No depreciations ontransactions' which states:-
    .... if you use the new depreciation calculation, the system no longer saves depreciations on transactions in the line items. Exceptions to this rule are - proportional value adjustments in the case of retirements or retirement transfers, since these must continue to be calculated at single transaction level.
    My questions are:
    1.Even after this the report with depreciation values as Zero can be grossly misleading (other reports are showing correct values).  Is it correct?
    2.If what SAP is saying is correct, then How is this New Depreciation calculated? If anybody has an idea, please explain...
    I hope i am clear in stating my requirements.
    Thanks in advance.
    SK

    Hello,
    Can you please look in the /put/log directory and copy the error from the appropriate log file. You should find a log file with a name similar the to upgrade phase that is causing the error.
    Thanks
    N.P.C

  • Transaction CO Through-postings from FI has been locked Error on Assets

    Hallo,
    We are on ECC 6.0 EHP5 SRM 5.0 EHP1 SAPKIBKT18
    We have the following problem. When we want to confirm in SRM PO's which are booked on an Asset the following error occurs:
    System status INCM is active (Confirmation 187950)
    Transaction CO Through-postings from FI has been locked (Item 1)
    We don't have the error when confirming a Purchase order created on a Cost Center or WBS Element and it only occurs in our productive system. We have checked the following
    CO through posting open and/or locked and they are ok (Confirmation on Cost Center and WBS Element works so it should be)
    The master data of the PO. Can't see anything there
    Master data of the Assets
    Autoriation of users who are logged in and the RFC users
    We cannot seem to find the problem maybe some of you have encountered this ?
    Thanks!

    Hi,
    Please see below for more inputs
    http://forums.sdn.sap.com/thread.jspa?messageID=5330802#5330802
    http://forums.sdn.sap.com/thread.jspa?messageID=8874880#8874880
    http://forums.sdn.sap.com/thread.jspa?messageID=8646493#8646493
    Regards,
    Nikhil

  • Error in Asset Master record creation

    I have created one asset class 1001 for land and 3001 for Vehicles by myself (i.e. without reference)
    I have filled all account determination, screenlayout, etc.
    When i create asset master record for LAND, i enter asset class 1001 (for land) & it accepts.
    But when i create asset master record for Vehicle, i enter asset class 3001 (for vehicle). But it throws error.
    Error shown is:
    Chart of depreciation IN00 that was determined is not entered for asset class 3001.
    _How to rectify the problem ?_
    Help with Tcode or menu path.
    Further to rectify,
    I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
    But error shown is:
    Chart-of-depreciation-dependent assignment to asset class not possible
    (Message no. AC012)

    I am trying to Specify Chart-of-Dep.-Dependent Screen Layout/Acct Assignment (Tcode: ANK1)
    But error shown is:
    Chart-of-depreciation-dependent assignment to asset class not possible
    (Message no. AC012)
    Solution given is:
    In order to be able to assign chart-of-depreciation-dependent data to asset class 1001, the following conditions have to be met. You have to have already
    1. Defined at least two active charts of depreciation
    2. Assigned asset class 1001 to more than one chart of depreciation
    However, at the moment this asset class is only assigned to chart of depreciation 1.
    I m unable to understand the solution
    Edited by: Deepak Agrawal on Mar 19, 2009 8:06 PM

  • Error in Asset Calculation in Asset Master

    Hi ,
    We getting following error while recalculating asset because its balances not carried forwarded to next successive fiscal year, pl find..
    SYST: Abnormal termination (ANLB-LGJAN not equal to ANLC-GJAHR) Asset 50000002500000020000
    Message no. AA698
    Asset affected: 000250000002-0000
    Diagnosis
    Processing terminated due to a system error.
    System Response
    Internal tables ANLB-LGJAN and ANLC-GJAHR of asset 50000002500000020000 are not synchronous.
    Procedure
    Contact your system administrator.
      Please help me

    Hi,
    the following link will be helpful
    Tran : AFAR : Dump Error GETWA_NOT_ASSIGNED (Field symbol has not yet been
    best regards Bernhard

  • Error in Asset Value carry forward to next year

    As a regular periodic process of Month/Year closing activities in SAP, Asset Year 2015 was opened and then closes the year 2014 and carried forward the Asset values to the year 2015. But unfortunately some of the Asset value had not been transferred to the year 2015. As a result, Depreciation had not been charged for those Asset for the year 2015. Need to transfer the Asset value to the current year immediately. Can any one help me regarding the problem ? The APC Start value is showing in the year 2014 but its not showing in 2015.
    The Closing value of Current APC of year 2014 does not match with the Opening value of the APC Start, so what should be the possible reasons for that ?

    Hi Erika,
    I did that on last January 2015. First i use the T-code: AJRW for the Fiscal Year Change and then T-code: AJAB - for Year end-closing Asset Accounting as i did that for last 4 years. Though there was as error message indicating error in depreciation calculation, our consultant assured me that that will not create any problem. The Error was like below:
    600981       0    Secretariat Table                              2014 Error in dep. calculation

  • Error in asset data migration thru LSMW

    Hi u all,
    i have an issue while running an lsmw for asset data loads here, when i did it in foreground it saves the asset but when i run it in background its erring out
    i am doin it thru as91 whichis legacy transfers the error is
    Field RALT_DYNP_STRUC-ANBTR02(7) is not an input field     AS91     1     SAPLALTD     1100     14     S     00     347
    Field RALT_DYNP_STRUC-ANBTR03(7) is not an input field     AS91     1     SAPLALTD     1100     14     S     00     347
    this ANBTR02(7) n ANBTR03(7) are the *** spl dep fields for TAX and AMT in the takeover values tab,where we were giving the values of spl dep (Bonus value which is taken off in the acquisition yr)
    all is goin good in foreground but its giving the error whichi pasted above saying ..is not an input field, when i did it in background not able to figure out...
    Any help would be really grateful and appreciated......Thanka a lot in advance.

    Hi Nathan,
    as i mentioned earlier, it goes smooth when it is done manually or lsmw foreground, and answering to ur ques'n yes the fields are open. i am getting the error when i do it in batch input....
    Thanks ya
    Jay

Maybe you are looking for