Error in B1 DB Profiler
Error in B1 DB Profiler:
Even though I configured my SBO_SP_Transaction Notification stored Procedure, I am getting the Error like below.
"An addon test has been run.Several lines should appear in the B1DbProfiler is not correctly configured.If failed please check you have copied the needed code into the SBO_SP_TransactionNotification stored procedure."
Below Note: i found this in discription file....
"Important Note: Please pay attention to the declaration of the object_type variable inside the SBO_SP_TransactionNotification stored procedure. In precedent version it was declared as int, starting from B1 2004 and B1TE 2.0 version we require the declaration of this variable as nvarchar(20). Please change it if you have the old declaration version."
According to the Note: in above i also changed the declaration even though i am getting this error
i am using the sap version->SAP B1 2005B(7.40.252)SP:00 PL:39
Plz give me a nice solution
Regards,
Ani.
Hi below is my sp format.....
i am not having Any if object type=30
*"set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
ALTER proc [dbo].[SBO_SP_TransactionNotification]
@object_type nvarchar(25), -- SBO Object Type
@transaction_type nchar(1), -- [A]dd, <u>pdate, [D]elete, [C]ancel, C[L]ose
@num_of_cols_in_key int,
@list_of_key_cols_tab_del nvarchar(255),
@list_of_cols_val_tab_del nvarchar(255)
AS
begin
-- Return values
declare @error int -- Result (0 for no error)
declare @error_message nvarchar (200) -- Error string to be displayed
select @error = 0
select @error_message = N'Ok'
-- ADD YOUR CODE HERE
DECLARE @object int --declare the object variable
DECLARE @hresult int --declare the hresult variable
EXEC @hresult = sp_OACreate 'B1DbProfilerCOM.Profiler', @object OUT
EXEC @hresult = sp_OAMethod @object, logDb, NULL,
@object_type,
@transaction_type,
@num_of_cols_in_key,
@list_of_key_cols_tab_del,
@list_of_cols_val_tab_del
IF @hresult <> 0
BEGIN
EXEC sp_OAGetErrorInfo @object
RETURN
END
-- Select the return values
select @error, @error_message
end"*
Similar Messages
-
JSPM: Error while detecting start profile for instance with ID _c.
Hi Experts,
we have an error when we start JSPM with message "cannot initialize application data. Error while detecting start profile for instance with ID _c." . Until now nothing has been updated yet. The system can be started up and shut down without any problem. The profiles are found in /usr/sap/PMA/SYS/profile
Our BI system is currently Netweaver 7.0 with SPS14. We plan to update it to SPS20. But when we start JSPM, we have abover error.
could somebody give a help? Thank you very much.
Rongfeng
P.S. the log file DETECT_SYSTEM_PARAMETERS_01.LOG:
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!PATTERN[DETECT_SYSTEM_PARAMETERS_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.ListFormatter]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
#1.5^H#C000995FC0200000000000207BD47BD40004789C01294DB0#1258511336558#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.initializeJspmDataModel(InitialParametersDetector.java:397)#Java###Initializing JSPM data model...##
#1.5^H#C000995FC0200000000000217BD47BD40004789C01295968#1258511336561#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectProfileDirectory(InitialParametersDetector.java:1468)#Java###Detected profile directory .#1#/usr/sap/PMA/SYS/profile#
#1.5^H#C000995FC0200000000000227BD47BD40004789C0141AFE0#1258511338156#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:936)#Java###Detecting the parameters of the database...##
#1.5^H#C000995FC0200000000000237BD47BD40004789C014205D0#1258511338178#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:261)#Java###Executing command with arguments .#2#dbinfo#/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000247BD47BD40004789C01421570#1258511338182#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:41)#Java###Java process ID , name has been started.#2#5#com.sap.sdt.dmt.main.DMT#
#1.5^H#C000995FC0200000000000257BD47BD40004789C01421958#1258511338183#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:54)#Java###Command line: #2# #/opt/IBMJava2-amd64-142/jre/bin/java -cp .:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/sdt_dmt.jar:/oracle/client/10x_64/instantclient/ojdbc14.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jddi.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/opensqlsta.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/frame.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/jperflib.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/lib/util.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/tc_sec_secstorefs.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/exception.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/logging.jar:/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/./lib/opensqlsta.jar:/sapmnt/PMA/global/security/lib/tools/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/tools/iaik_jce.jar:/sapmnt/PMA/global/security/lib/tools/iaik_smime.jar:/sapmnt/PMA/global/security/lib/tools/iaik_jsse.jar:/sapmnt/PMA/global/security/lib/tools/w3c_http.jar:/sapmnt/PMA/global/security/lib/tools/iaik_ssl.jar:/sapmnt/PMA/global/security/lib/engine/info/IAIKSecurityFS.list:/sapmnt/PMA/global/security/lib/engine/iaik_jce.jar com.sap.sdt.dmt.main.DMT -rootdir=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM -descriptor=csrt29_PMA -logfile=/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01.LOG dbinfo /usr/sap/PMA/DVEBMGS10/j2ee/JSPM/config/DBINFO.XML#
#1.5^H#C000995FC0200000000000267BD47BD40004789C01422128#1258511338185#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.JavaOsProcessController.logProcessInfo(JavaOsProcessController.java:55)#Java###Standard out: #2# #/usr/sap/PMA/DVEBMGS10/j2ee/JSPM/log/log_2009_11_18_10_28_50/DMT_01_01.OUT#
#1.5^H#C000995FC0200000000000277BD47BD40004789C01424838#1258511338195#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.launch(OsProcessController.java:126)#Java###Process ID has been started.#1#5#
#1.5^H#C000995FC0200000000000287BD47BD40004789C014253F0#1258511338198#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:182)#Java###Waiting for process ID , name to finish.#2#5#java#
#1.5^H#C000995FC0200000000000297BD47BD40004789C017402B0#1258511341454#/System/Server/Upgrade/JSPM##com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.tools.proc.OsProcessController.waitFor(OsProcessController.java:215)#Java###Process ID , name has been finished, exit code .#3#5#java#0#
#1.5^H#C000995FC02000000000002A7BD47BD40004789C01741638#1258511341459#/System/Server/Upgrade/JSPM##com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.db.dmtif.AbstractDMTController.execute(AbstractDMTController.java:273)#Java###Command has been executed.#1#dbinfo#
#1.5^H#C000995FC02000000000002B7BD47BD40004789C017421F0#1258511341462#/System/Server/Upgrade/JSPM##com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.jspm.gui.InitialParametersDetector.detectDb(InitialParametersDetector.java:984)#Java###Detection of the parameters of the database has finished. Database type is , database name is and database version is .#3#ORA#Oracle#10.2.0.2.0#
#1.5^H#C000995FC02000000000002C7BD47BD40004789C01744CE8#1258511341473#/System/Server/Upgrade/JSPM##com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#######Thread[main,5,main]##0#0#Info#1#com.sap.sdt.j2ee.tools.sysinfo.AbstractInfoController.updateProfileVariable(AbstractInfoController.java:284)#Java###Parameter has been detected. Parameter value is .#2#/J2EE/StandardSystem/DefaultProfilePath#/usr/sap/PMA/SYS/profile/DEFAULT.PFL#
Sorry, I don't know how to format post
Edited by: Rongfeng Shi on Nov 18, 2009 4:20 AMHi Rongfeng,
There is not much information about the error in the log file you have pasted above.
Please repeat the issue and catch the log files once again.
Are you able to open SDM ?
Best Regards
Raghu -
Error while configuring talent profile for ESS
Dear Experts
I am having following error while configuring talent profile for ESS:
The URL http://pplkhidr05.ppl.com.pk:8000/sap/bc/webdynpro/sap/hrtmc_employee_profile was not called due to an error.
Note
The following error text was processed in the system TRG : Access via 'NULL' object reference not possible.
The error occurred on the application server PPLKHIDR05_TRG_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: IWCI_HRTMC_TP_SHARED_DATA~GET_PLVAR of program /1BCWDY/81IYQOEI3SKMOOB9TXW5==CP
Method: OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: IWCI_IF_FPM_OIF_CONF_EXIT~OVERRIDE_EVENT_OIF of program /1BCWDY/828X5HC99194NVUUKJ30==CP
Method: GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IWCI_IF_FPM_FLOORPLAN_COMP~GET_UIBBS_FOR_EVENT of program /1BCWDY/7V06LYNNPH3D2G2T1W0Z==CP
Method: IF_FPM_FLOORPLAN~GET_UIBBS_FOR_EVENT of program CL_FPM_OIF_INTERNAL===========CP
Method: GET_NEXT_UIBBS of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
Method: RUN_EVENT_LOOP of program CL_FPM========================CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system TRG in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server PPLKHIDR05_TRG_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server PPLKHIDR05_TRG_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Any suggestions on how to resolve the error?
Regards
ImranImran,
check this thread
http://forums.sdn.sap.com/click.jspa?searchID=43957204&messageID=8996092
Thanks
Bala Duvvuri -
I am trying to download Firefox on my laptop which runs Vista. I am getting the following error message: Your Firefox profile can't be loaded, it may be missing or innaccessible." Please help.
See:
* http://kb.mozillazine.org/Recovering_a_missing_profile
* http://kb.mozillazine.org/Profile_in_use
* https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding -
ORA-06528: Error executing PL/SQL profiler
Hai
I would like to see the outcome of package (to view the report on the package).In order to get that
I installed the below package connect as internal
sql>d:\oracle\orq81\rdbms\admin\profload.sql
In order to use dbms_profiler,after that i need to have installed profilling tables ,in order to get i ran proftab.sql ,and its created three tables are
plsql_profiler_data,plsql_profiler_units,plsql+profiler_runs
after that i ran the below procedure
create or replace procedure do_mod as
cnt number := 0;
begin
dbms_profiler.start_profiler( 'mod' );
for i in 1 .. 500000
loop
cnt := cnt + 1;
if ( mod(cnt,1000) = 0 )
then
commit;
end if;
end loop;
dbms_profiler.stop_profiler;
end;/
PL/SQL procedure successfully completed.
exec no_mod
PL/SQL procedure successfully completed.
In order to see the report on packge ,i had query the table , RUN_TOTAL_TIME IS 3.5190E+11(this is seconds)
my qusetion is
1)
Please explain me that is total amount time in seconds or minutes,i donnot understand what is 3.5190e+11
SQL> select RUNID,RUN_COMMENT,RUN_TOTAL_TIME FROM PLSQL_PROFILER_RUNS;
RUNID
RUN_COMMENT
RUN_TOTAL_TIME
1
mod
7.0975E+11
2
mod
6.9767E+11
RUNID
RUN_COMMENT
RUN_TOTAL_TIME
3
no mod
3.5190E+11
2)
I had ran the above script one of the schema ,and successfully created above procedure.When i execte,it retuns below error message
SQL> exec do_mod;
BEGIN do_mod; END;
ERROR at line 1:
ORA-06528: Error executing PL/SQL profiler
ORA-06512: at "SYS.DBMS_PROFILER", line 123
ORA-06512: at "SYS.DBMS_PROFILER", line 132
ORA-06512: at "MOHAN1.DO_MOD", line 4
ORA-06512: at line 1
Any one any idea about that
Regards
mohan1) Run_total_time is the elapsed total time in nanoseconds.
A nanosecond is one billionth of a second.
It is displayed in scientific notation
where E stands for "times ten to the power of".
So, 3.5190E+11 nanoseconds
= 3.5190 * 100000000000 nanoseconds
= 351900000000 nanoseconds
= 351900000000 billionths of a second
= 351900000000 / 1000000000 seconds
= 351.9 seconds
If you want to display it in seconds, use:
SELECT runid,
run_comment,
run_total_time / 1000000000 AS seconds
FROM plsql_profiler_runs;
2) The only thing that looks wrong about your do_mod procedure
is the last line:
end;/
The / should be on the next line.
Other than that, I don't see any possible cause for
the error. -
06528. 00000 - "Error executing PL/SQL profiler"
HI.
i am getting an error -
ORA-06528: Error executing PL/SQL profiler
ORA-06512: at "SYS.DBMS_PROFILER", line 258
ORA-06512: at line 3
06528. 00000 - "Error executing PL/SQL profiler"
*Cause: An error occurred in during execution of a PL/SQL profiler
procedure.
when i try to run the following block
BEGIN
DBMS_PROFILER.START_PROFILER( sysdate,'');
DBMS_PROFILER.FLUSH_DATA;
END;
plz helpRun proftab.sql first. look st the test case. Hopefully you have installed dbms_profiler package. The first anonymous block is to test that, second block is your block which is failing.
SQL> ed
Wrote file afiedt.buf
1 declare
2 var1 binary_integer;
3 var2 binary_integer;
4 begin
5 DBMS_PROFILER.GET_VERSION(Var1,var2);
6 dbms_output.put_line('Var1 '||Var1);
7* end;
8 /
Var1 2
PL/SQL procedure successfully completed.
SQL> BEGIN
2 DBMS_PROFILER.START_PROFILER( sysdate,'');
3 DBMS_PROFILER.FLUSH_DATA;
4 END;
5 /
BEGIN
ERROR at line 1:
ORA-06528: Error executing PL/SQL profiler
ORA-06512: at "SYS.DBMS_PROFILER", line 123
ORA-06512: at "SYS.DBMS_PROFILER", line 132
ORA-06512: at line 2
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\ADMIN\proftab.sql
SQL> BEGIN
2 DBMS_PROFILER.START_PROFILER( sysdate,'');
3 DBMS_PROFILER.FLUSH_DATA;
4 END;
5 /
PL/SQL procedure successfully completed. -
Error when reading Exchange Profile
Hello everyone,
I have a simple file=>XI=>file scenario.
The sender file adapter picks up the file fine.
File is put-to and retreived-by the queue just fine.
I then get the error "Error when reading Exchange Profile for system .. and client ..."
SLDCHECK gives error "Connection to SLD does not work"
LCRSAPRFC and SAPSLDAPI have been test and work fine.
Any ideas?
Thanks in advance
DimitrisHi,
Try this:
<a href="http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm">SLDCHECK</a>
and this note:
764176 (which gives a quick solution foor all SLD problems)....
Regards
Suraj -
IDoc adapter inbound channel: Error Error when reading Exchange Profile
Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit NaikHello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik -
Error 56 "EDI: Partner profile inbound not available"
I am tring to post IDOC using we19.
Bu t, I am getting the error 56 "EDI: Partner profile inbound not available"
Could any one please suggest me ..how to solve the problem.Hi Sam,
When you process the inbound IDoc using standard inbound button, the system will perform validation for a given IDoc control record against the partner profile and file port setup. In your case, there is no inbound partner profile setup (WE2) for the corresponding message type. Therefore, you got an error message 'Partner profile not maintained'.
When you process the inbound IDoc using inbound function module button, the system will <b>NOT</b> perform validation against the partner profile and file port setup. The system will call directly the inbound FM to process the inbound IDoc. You may get an error based on validation of IDoc data record within the inbound FM.
In production environment (real case), the system will always validate againts the partner profile and file port setup for incoming IDoc.
Therefore, it is important to have ALE and IDoc corretly setup for inbound and outbound message types.
Again, hope this will help.
Regards,
Ferry Lianto -
ERROR WHEN GENERATING PARTNER PROFILE
I AM GETTING THE FOLLWING ERRORS WHEN GENERATING PARTNER PROFILE
Outbound parameters for message type MATMAS MATMAS05 could not be created
Please enter a valid value for the output mode
Outbound parameters for message type SYNCH SYNCHRON could not be created
Please enter a valid value for the output modeHi Willard,
Checl the output mode and outbound parameters for those both of message types.
Hope this helps you..
Regards,
Kumar. -
whenever i try to download a rather large file i continue to get the "could not read source file" error. Tried new profile, uninstalling and looking for the compreg.dat file to delete nothing is working. Please help
Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC. -
Every single time I power up photoshop CC get an error. says " the monitor profile "acer S201HL" appears to be defective. Please rerun your monitor calibration software. How do I fix this?
Your factory-supplied monitor profile, associated with your monitor by the operating system, is bad. It's more common than you'd think.
To avert the error:
Open the Color Management panel of your Windows operating system. In the Devices tab, if it is not already listed [ Add... ] the sRGB IEC61966-2.1 profile and [ Set as default Profile ].
After doing the above, log out of Windows and back in again, just to ensure everything's updated.
Note that the above assumes your monitor is more or less displaying color in the sRGB color space (sRGB is short for sRGB IEC61966-2.1). For many monitors this isn't a terribly wrong assumption.
If you want to ensure you have the most accurate color, consider buying a calibration and profiling device, which (with its associated software) can set your calibration and generate custom color profiles by doing actual measurements from your monitor. You'll want to take some time to get your mind around how color-management works, and that is not a trivial task. It's certainly well beyond what can be taught in a forum post by post.
Good luck.
-Noel -
Virus scan server error: "No virus scan profile is selected as the "default"
Hi Team,
I try to upload Fiori Code into SAP Netweaver Gateway server .
i can able to share Project.
But when i try to submit code
then at the end of Process i got error message.
Virus scan server error: "No virus scan profile is selected as the "default"
Please Guide me
Regards
Pankaj Kamble
Tags edited by: Michael ApplebyHi Abraham,
Thank you very much. My problem resolved.
I have one Query Please guide me.
whenever we run Server URL from The Browser, first we must need run "chrome.exe --args --disable-web-security" command on CMD. on located directory the Chrome has installed.
to disable web security.
if I did not run that command on CMD, then Fiori Apps not worked.
Why it's compulsory to disable web security.
Regards,
Pankaj Kamble -
Error enrolling devices in profile manager!!
I have enrolling my macbook to the profile manager.
When I go to the https://(FQDN)/mydevices/ , and I hit the enroll buttom after logining in, and download the config file, try to install.. I get an error that says:
"The profile is either missing some required information, or contains information in an invalid format."
The problem is that I managed to enroll my iPhone with no problems.. only my mac (which is running the server OS) is not enrolling.
the certificate is valid from a trusted commercial thing..
Can someone please help?only my mac (which is running the server OS) is not enrolling.
Why are you trying to enroll your device management server in it's own device management?
I've never tested anything like that, but I bet you can't do that... -
I was trying to upload a video clip to iMovie and I got a popup saying that there was an upload error. I switched profiles, came back, and when I opened iMovie it said that it was uploading my clip, but it hasn't shown any progress and won't close iMovie.
Post in the iMovie forum.
Maybe you are looking for
-
Oracle user account is getting locked frequently
Hi everyone!!! I am using Oracle 11g on Linux . I have user named "XXX" to whom I have assigned a DEFAULT profile. The Password parameters in DEFAULT profile are as follow. Resource Name Resource
-
Business Connector and sap router on same server?
Hello, We are investigating currently in order to install "Business Connector" and "Sap router" on a same dedicated server. I would like to know if it is possible or not recommended, etc... if there are some guidelines. If someone has experience in t
-
Security Manager for decryption is not set
Hey, I am using the Livecycle virtual appliance in a test version to evaluate its features. When I decrypt an encrypted document with the java API I get an error message that says that the security manager is not set. Is the security Manager part of
-
How to Transport a ABAP Program and Variants on the program
Hi, I created a Executable Program in SE38 and collected in a Transport Request. For that program i created VARIANTS ...but how can i collect the created variants in a Transport request When creating a variant system didn't prompted Transport request
-
Work duration with 2 decimal places
All, i need to maintain a task with 25 min, using unit of measure H. Is there any way of setting up the work duration for tasks with more than 1 decimal place? Or the only way is to have different unit of measure? Thanks, Ana