Error in BD64

Hi Abappers,
While distributing the model view in BD64, i am getting the following error:
Communication error occurred
internal error / Name or password is incorrect (repeat logon)
Please suggest the solution to correct this error.
Thanks and Regards,
Rahul

Hi,
Go to we21. Select the port and double click on RFC Destination. Try to test the connection between systems. May be the login name and password is used for communication between two systems is changed.
KR Jaideep,

Similar Messages

ALE Error in BD64 while partner generation and model distribution

Dear all,
My scenario is as follows.
Transfer MATMAS from TTP105 to TTP100 system.
The steps I followed so far are as below.
On the Sender system TTP105
----

1) BD54 - Created the logical systems for sender & receiver (TTP100 and TTP105)
2) SM59 - Created the RFC destinations (TTP100 and TTP105) for both the sender and the receiver and checked the connections. They are working perfectly.
3) WE21 - Created the sender port as TTP100 (to represent that it points to the receiver system). The Type is USER and the Agent is my userid. Nothing in the outbound and inbound parameters sections.
4) BD64 - Created a modelview with the sender system as TTP105 and the Receiver system as TTP100 and the message type MATMAS. No filters defined. Saved it.
The problem begins here...
Problem#1
When I chose the created modelview and then choose Environment->Generate Partner Profiles.. I'm getting the message as No messages have been defined for the selection conditions in the model 
Can anyone guess why this error is occuring?
Problem#2
When I chose the created modelview and then choose Edit->ModelView->Distribute, again I'm getting another error which is as below.

RFC destination for synchronous communication (message type SYNCH)
Partner profile LS TTP100 SYNCH does not exist

Has anyone encountered such error message before? If yes, then please respond and rewards guaranteed for sure.
Cheers,
Sam

Thanks Ashwini for the reply. The issue was not saving as I had already saved it.
I actually solved this in another way.
The issue was in SCC4, the client 105 sender which was supposed to be assigned to my logical system had been changed by someone else to another. This was creating the whole issue.
I started all over from the scratch and found out the mistake at that step. Now everything is working fine.
Thanks for your help too!
Cheers,
Sam

Error in BD64 while partner generation and model distribution

Dear all,
My scenario is as follows.
Transfer MATMAS from TTP105 to TTP100 system.
The steps I followed so far are as below.
On the Sender system TTP105
----

1) BD54 - Created the logical systems for sender & receiver (TTP100 and TTP105)
2) SM59 - Created the RFC destinations (TTP100 and TTP105) for both the sender and the receiver and checked the connections. They are working perfectly.
3) WE21 - Created the sender port as TTP100 (to represent that it points to the receiver system). The Type is USER and the Agent is my userid. Nothing in the outbound and inbound parameters sections.
4) BD64 - Created a modelview with the sender system as TTP105 and the Receiver system as TTP100 and the message type MATMAS. No filters defined. Saved it.
The problem begins here...
Problem#1
When I chose the created modelview and then choose Environment->Generate Partner Profiles.. I'm getting the message as No messages have been defined for the selection conditions in the model 
Can anyone guess why this error is occuring?
Problem#2
When I chose the created modelview and then choose Edit->ModelView->Distribute, again I'm getting another error which is as below.

RFC destination for synchronous communication (message type SYNCH)
Partner profile LS TTP100 SYNCH does not exist

Has anyone encountered such error message before? If yes, then please respond and rewards guaranteed for sure.
Cheers,
Sam

1. There is not need to create an RFC destination for the sender system
2. If the receiver logical system and rfc destination have the same name, then there is no need to create ports, they are created automatically with the 'generate partner profiles'
3. Try saving your data before going to 'Generate Partner Profiles'
4. Problem#2 is caused because the step for Problem#1 did not execute successfully
Message was edited by:
 Kris Donald

ALE error in BD64

hi,
IAm getting error message 'sender & reciever should be different' in BD64 when i create MODEL VIEW.
There is one logical system erp800 which is assigned to client 800.
I have created RFC connection in which the destination & target system are same i.e erp800.
What i need to know is what should be given in sender & reciever parameters.

Hi,
Your sender and reciver are same client,
In model view sender and reciver should be different.
If you have two clients then give one as sender and other as reciver.
Or give on R/3 system as sender and other as reciver.
Like DEV as sender and QAP as reciver.
Regards,
Wasim Ahmed

Distribution Model View - Error

Hi,
When we try to distribute the model view, we get an error 'Model View has not been distributed. Reason : Maintenance systems for model view D-HR-MD are not identical...Maintenance system in sending system D-OFS-HR.....Maintenance system in receiving system DH3-500' .
What is being referred to as the maintenance system here? Are we missing out on something?
Thanks in advance!
Regards,
Nejuma Iqbal

Hi buddy,
we are also facing the same type of Error in BD64 while distributing the model view
Could you please help me to resolve this error
Regards

Error while creating filter using BD59 and BD64

Hi Friends-
While creating filters for HRMD_A message type using BD59 i have added one field stat2 for segment
E1P0000 and its coming also in BD64 while creating filter group but when i double click on it to give value to it it gives me error ' Inconsistency in ' .
what could be the reason pls let me know ?
Regards
Meeta

Hi,
Try to distribute the model view in BD64 ( Edit->ModelView->Distribute). you can check for technical inconsistencies for message type in Transaction BDM5
Regards,
Vinod

Error while distributing a distribution model in BD64

Hi,
I am trying to send an IDOC from one client to another client of the same SAP system. To achieve that, i have created the necessary logical systems and made the necessary partner, port configuration as well as RFC Destination. In BD64, I have created a new model and added a BAPI 'SAVEREPLICA' and Object 'BUS1093' using Add BAPI button. But when I am trying to distribute the model it's giving the following error - 'Model view ABCDX has not been updated. Rreason: Distribution model is currently being processed'.
Kindly help,
Thanks in advance,
Deep.

Using of BAPI is not accepted between two clients of the same system, you'll have to use different SAP systems

BD64-Log of Model View Error

Hi,
In BD64 I have defined the model and also successfully created the partner profile.But after that when I am trying to do Edit/ModelView/Distribute I am getting following error.Can you please help me why am I getting this error?
Target system TESTECF800                  Model view MATERIAL has not been updated
                                                         Reason: No authorization to create model view MATERIAL
                                                      ..... authorization object B_ALE_MODL
                                                ..... Parameter: activity 01 , model view MATERIAL
Regards,
Bedayan.

Hi Bedayan,
As per the error your current profile is not having proper authorization to maintain model view. I think your basis people have revised the authorization objects.
I donot have the authorization to distribute the model view to the target client
Reddy

BD64 - Distribute Model View error?

Hi, Expert:
when I distribute model view using BD64. the following
error message comes:
"Target system is an external System. It does not support this function."
what's the problem? thanks

hi
good
go through this link, which ll give you brief idea about the model view -BD64, i hope this ll help you to solve your problem.
http://www.supinfo-projects.com/cn/2005/idocs_en/2/
thanks
mrutyun^

Error while distributing the ALE distribution model through BD64

Hi,
I am getting the error while distributing the distribution model through BD64. The error is as follows:
"Model view DVGDVH has not been updated
Reason: the following ALE connection already exists in model view TESTMOD".
What does this means?
Regards,
Soumya.

Dear Sapera,
I faced the same problem last night.
We just manually deleted the distribution model from receiving system.
Log on to receiving system => BD64 => change/dispay => edit => delete => Save.
Once deleted log in to sender system and then select model and distribute again.
by performing this we were able to resolve this issue.
Warm regards,

ALE Set Up : BD64 Error

Hi All ABAP Gurus,
i am trasnfering material master data from Dev to QA using ALE.Fot that i have done the folloeing things.
1) First i Created and Assigned Logical system for respective clients using SALE Transaction.
2) Made RFC Connetion in Dev and QA using SM59 Transaction
3) Created Model View Distribution using BD64 Transaction.
In this step when i am going for Distribute ( Menu Path Edit--->Model View --> Distribute ), i am getting the following error
Target system QUALITY : Model view MM-MODEL has not been updated
Rreason: Distribution model is currently being processed
Please sugget how to correct this error.
Rewards will be given.
Regards.
ulhas

Hi,
Creating Customer Distribution Model
o     Go to T. Code BD64
o     Click on change and Create model view button
o     Enter the short text and Technical name as ZXXXXX
o     Select the model and click on Add Message Type Button
o     Give the Sender as STUD_S,
o                    Receiver as STUD_R,
o                    Message Type as ZMES_TYPE
o     Select the model view & click on Environment -> Generate Partner Profiles
o     Select Transfer IDOC Immediately and Trigger Immediately radio buttons
o     Click on Execute
o     You should get a list in green color which means it executed successfully.
o     Back to main screen, select the model view
o     Click Edit->Model view->Distribute
o     Click on continue
o     You should get a list saying model view is distributed successfully.
Reward if useful
Thanks
Jagadeesh.G

Error Message type ARTMAS belongs to BAPI in BD64?

Hi,
when i want to send ARTICLES using ARTMAS Message Type in BD64 ( Customer Distribution Model ) it shows an error message like below
" Message type ARTMAS belongs to BAPI
RetailMaterial.Clone: Use the BAPI in the model "
but i want use ARTMAS Message Type in BD64.
Please can anyone tell me how solve this issue.

I found the sloution.
First, for our distribution model we add message type still is "MATMAS", and then we should add BAPI as fllow:
Obj. name/interface: BUS1001001
Method: Clone
We can find these information from table TBDBE.
Try BD10, it can work.
I hope it can help other people.

Error in distributing the Model View in BD64

Hi Experts,
I have some problem in distributing model view in BD64. please see here the error details:
Model view <logical client> has not been updated
Reason: No authorization to create model view <logical client>
.....authorization object B_ALE_MODL
.....Parameter: activity 01, model view <logical client>
i have created full auth and B_ALE_MODL role for the specific account but still i cant proceed.
Please help.
Thank you,
Tony

Hi Experts,
In addition, this is in line with our integration between SRM 7.0 EHp1 SPS05 and ECC 6.0 EhP4 SPS03. both systems are running in windows 2003 64bit.
Edited by: Tony on Aug 3, 2011 4:30 AM

IDOC 2 FIle Scenario BD64 error ?

Hi Experts
While Create Distribution Model (BD64)
Sender System u2013 R3XCLNT100 (RFC Destination From XI)
Receiver System u2013 XIRCLNT100 (RFC Destination Form SAP )
Message type - MATMAS
While selecting Sender System and Receiver System it showing only (XIRCLNT100 RFC Destionation Only) But i unable to see the RFC Destionation From XI ( R3CLNT100). Can any body help me out.

Hi,
Please check whether you followed the coorect steps while configuring the ALE
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/sapR3%2528Idocs%2529ToXI--Steps+Summarized&
Thanks,
Tiny
Edited by: TINY MAMPILLY on May 11, 2009 7:23 AM

Error - Distributing the Model using BD64

Hi! All
Not able to distribute the model from the Sender System.
Error : Model view ZDMKANBAN has been changed
While Generating the Partner Profile able to generate Partner, Port, Outbound parameter from the Sender System.
but if i execute an IDOC through WE19 able to get the Status - 03 for Sender System & Status - 53 for Receiver System
when i try to transfer IDOC from Sender System to Receiver System could not do it.
Hope so bz of error occurred in Distribution Model. Is it So
kindly help me.

you have to distribute the distribution model in its new version

Error in BD64

Similar Messages

Maybe you are looking for