Error in Billing Schema step in billing document

Dear all,
Small change in my question.
I have a schema with DPC. For the month of March bill the meter reading is estimated and current month April  I got actual meter reading and biled the customer. February month meter reading also actual only. Now the April month billing document should show two lines for each and every schema step. For example 30th billing schema step is to calculate the amount for the consumption then it should show two lines for 30th schema step for reversal and recalculation. But in my case it is not happening. Instead of showing two lines for step 30 it is showing 30 in for the first line and 31 for second line. But the actual schema step 31 will be different. That means it is showing continous schema step number in billing document.
*This problem is in production system. The same configuration is there in developement system also but it is showing two lines for the same kind of scenario I mentioned above.*
What will be the reason?. Can you please suggest solution for this?.
Umar
Edited by: umar khan on Apr 29, 2009 7:08 AM

I checked TSG, DE1 RDP1. In production and developement same configuration for these fields. In developement it is working fine, but giving problem in production only.
can anyone give any other possible solution for this?.
Umar
Edited by: umar khan on May 1, 2009 8:00 AM

Similar Messages

  • Printing PO error "Maintain billing plan type in sales document type...

    Hi,
    I am trying to print SAPscript to pdf using ADOBE_ENTRY_NEU routine and when i try to display output from ME9F, i get an error that says "Maintain billing plan type in sales document type or Item Category"
    anyone have any clue why this is happening?

    As this is about SAPscript, moved it to ABAP Programming forum

  • Billing Saved But No Accounting Document Generated

    Hi,
    I was trying to create billing and got the message stating "Billing saved but no accounting document generated." Does anyone know why this would happen? And does anyone know what steps to take to ensure it does not occur?
    Thanks,
    Suneela.

    Hi,
    This error can be caused by many different things. You should check the following possible causes:
    - net value is zero
    - accounting assignment group does not match the GL account
    - error in payment term
    One more reason could be that the posting period is closed. In that case, you need to go to the header details of the billing and change the billing date to the current month's date if the earlier date is not of the current month.
    Reward points if found helpfull...
    Cheers,
    Siva.

  • When i cancelled the billing doc through VF11 Fi document not yet creted.

    Pls help on this issue.
    When i cancelled the billing doc through VF11 Fi document not yet creted. system thrown the given below error:
                                                                                    Diagnosis   :                                                                          The document does not exist. It was possibly not posted and therefore cannot be read from the database.                                                                               
    Procedure  :                                                                    
         Repeat the transaction at a later time.                                                                               
    Pls help on this issue.I assign full marks .
    Rgds
    Mahesh

    Dear Mahesh
    This is bcoz you have not assigned the Accounting Document type for your cancellation billing document.
    Go to VOFA, select the cancel billing document type S1 and [see whether S1 is maintained] against the field [Document Type]   Most probably, in your case, it is not maintained and hence the problem.
    Maintain S1 in the above field and retry to cancel the billing document.
    thanks
    G. Lakshmipathi

  • I cancelled the billing doc through VF11 Fi document not yet creted

    Pls help on this issue.
    When i cancelled the billing doc through VF11 Fi document not yet creted. system thrown the given below error:
                                                                                    Diagnosis   :                                                                          The document does not exist. It was possibly not posted and therefore cannot be read from the database.                                                                               
    Procedure  :                                                                    
         Repeat the transaction at a later time.                                                                               
    Pls help on this issue.I assign full marks .
    Rgds
    Mahesh

    First check whether accounting posting has been made for your Invoice or not.If accounting document has been created then go to VOFA and check the "Invoice cancellation" field and not the Document type  field.
    For your billing type F2, Invoice cancellation billing type should be S1 in the standard system.
    Document type field is for creation of accounting document type in FI. When you create F2 type of billing document, then DR type of accounting document should be created in FI.
    If this "Document type" field is blank than whatever may be the Billing type ,when it is released to accounting , RV type of document will be created.
    Regards
    Pradyumna

  • Billing Number Range problem ( accounting document not generated)

    Hi All,
    I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
    Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
    K I N D L Y     suggest  as U R G E N T.
    Regards,
    Danny.

    Dear,
              Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
               And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
    Regards,
    Sandip Shaktavat

  • Error in output determination via collective billing VF06

    Hi,
    We are facing error in output determination when collective billing is done. Multiple Orders numbers are entered in VF06 and processed to generate billing documents. VF06, which is used for batch billing, creates a batch job which internally calls VF04 to do this. For some of the invoices generated from the documents, we do not have anything in the Output, i.e. when we open the invoices in VF03 and go to Goto->Header ->Output, nothing appears.
    Say out of the 5 documents, 2 should have output determined and 3 do not. Then we see that it appears for either of the 2 or does not appear at all.
    This does not happens when the documents are processed one by one in VF04. We have to do collective billing and generate one invoice for each document. The condition records are also maintained correctly.
    Regards,
    Tarun

    Go to some of the invoices on which no output has appeared in change mode and do a output determination analysis in Go to Header-Output and then Ouptut Determinatino analysis.
    Please do this analysis for atleast 10 problamatic invoices. This will give yousome insight into the problem

  • How to capture Ord-related bill.st. in a sales document item

    Hi Experts,
    Just want to know how will i able to capture the value of the Ord-related bill.st. in a sales document item.
    Here's to give you example.
    - Go to VA03 and type in a credit memo req.
    - Double click on first item material.
    - Go to "Status" tab and you will see the "Ord-related bill.st. under Processing status.
    I want to capture the value found to this and display it in my report but I have no idea what table maintain this.
    Hope you can help me with this ASAP... Sorry for the rush..
    Regards,
    Yu

    Hi Both,
    Thanks for this! I already saw this one but I'm doubting at first if this is correct.
    Nevertheless, thanks for all your answer. =)
    Appreciate your help! =)
    Regards,
    Yu
    Edited by: Aura Yu on Sep 16, 2010 12:37 PM

  • Problem with Billing date while creating Billing Document

    According to the factory calendar maintained at the client side every Saturday is a holiday. Due to  this, the billing date for every Billing Document (vf01)  created on Saturdays gets pushed to Monday's date..  I tried using VOFM routine 011 to default the billing date (vbrk-fkdat) to system date.I have assigned the same in copy control.. But this does not work. Any suggestions?

    hello,
    This is a standard flow and if you want to tamper that, need to change in standard SAP...which I would not recommend you...
    Please use a separate factory calender for that particluar site...
    Thanks..

  • Xformbuilder error ... Could not save document Name/Name-Schema.xml

    Hello everyone,
    We're using 7.00 SP14 and I have a problem with the xml forms builder on one of our systems. We're having a 3 system landscape - all three are on the same patch level etc.
    I was able to create a new xml form on one machine, unfortunately it doesn't work on our P-system. I tried to create a new form as well as copied an existing one - with the same error result.
    While saving a project the following errors appear:
    The following error occured when saving the schema: Could not save document Name/Name-Schema.xml. Reason: Operation is not supported
    The project could not be saved on the server. Do you want to save a local copy?
    Oct 13, 2008 2:45:43 PM - (ERROR)com.sapportals.wcm.app.xfbuilder.server.ServerManager :Could not serialize document: Operation not supported
    Does anyone know what the problem is? I'd appreciate your help, thanks.
    Sincerely,
    Susanne
    Okay I just found out that it's not possible to create a new folder in KM under xmlforms. That's working on the other 2 systems quite well. I have all the admin roles but somehow somewhere somewho must have restricted that. We found out that ice, etc, runtim, entry points and maybe even a few more aren't setup to create new folders in there. Does anyone know where/how to change that? It doesn't work with Details - permissions etc.
    Edited by: Susanne Zahn on Oct 13, 2008 3:40 PM

    For anyone who's interested in the solution.. there you go.
    14.10.2008 - 17:53:00 CET - Antwort von SAP     
    Dear customer,
    Can you please check whether the repository /etc is in read-only
    mode?
    Please navigate to -
    System Administration -> System Configuration -> Knowledge Management
    -> Content Management -> Repository Managers -> File System Repository
    There you can see the checkbox for "read-only".
    Please insure that this is not ticked. If it is, please uncheck it
    and building/saving the project again.

  • Filling billed quantity into FI-CA document (DFKKOPK-MENGE)

    Hi,
    I need some advice if it is possible "somewhere"  in the System (FI-CA) to customize the filling of the billed quantity into FI-CA document. Table DFKKOPK (G/L Account Items in Open Item Account Document) field MENGE - Quantity.
    Is this functionality in SAP standard processing or should I use some Event (for example 0061 - Posting: Check Complete Document, Set Customer Fields) to fill out this field.
    Thanks for help
    Vlado

    Hello Vlado,
    there is no special activities necessary to transfer the quantity from DBERDTAX-MENGE to DFKKOP-MENGE.
    Please check the
    event R413,
    Field status group XXX for the G/L account, that the field  Quantity  is possible ( => 'X' Req. entry)   and
    note1367393.
    Best regards.
    Christiane

  • Billing Date for Cancelled Billing Document

    I have billing document whose billing date is Mar-2008 and in header creation date is May-2005. When we checked the document flow it showing same billing document has been cancelled in My-2005 and also cancelled document date is May-2005.  This billing document is created for contract whose billing plan is valid till Dec-2008. When i checked the billing plan there I get the billing date which showing in billing document. Now my question is why cancelled billing document having current year billing date when it is cancelled in May-2005.
    Regards,

    Hi
    We have a option to change the billing documnet date under header details.
    1) Go  to VF02
    2) Enter billing document date
    3) Go to header deatils and change the billing date to current billing date
    4) save the document.
    Pts if ur problem gets solved
    RGDS
    B.JAGANATH

  • Sales document is deleted still billing plans are in billing due list

    Hello,
    Sales document is deleted which have billing plans, But still billing plans are showing in billing due list for billing. Please let me know how to delete the entries in billing due list.
    Thanks and Regards
    Vikram.M

    Run program  RVV05IVB in SA38 to correct the billing index. Before running the program read OSS Note 128947 - Correction of SD document indexes with RVV05IVB on the checks to be done before running the program.
    Regards,

  • I in need of oracle project costing,project billing and project management setup documents? can you please help me.

    I am in need of project costing and project billing and project management setup documents with screen shoot? Can anyone help me?

    I have no clue about recovering the info, but when you say you save you should always use Save As. That clears unneeded info from the file. With the file size you have, that may be an important need.

  • Billing Variant and Billing Schemas

    Hi Gurus,
    I have  to create some custom billing variant.
    Can somebody share some cookbook or manual regarding billing variants & billing Schemas.
    Thanks in advance.

    There is no any official cookbook or manual on billing variants and billing schemas.
    If you have to create your own variant you should:
    a) figure out what is an existing variant closest to your requirements,
    b) analyze its documentation (EA88) and source text,
    c) create your own variant (EA88)
    d) copy variant chosen to your own function module for your variant (ISU_Zxxxxxxxx, where xxxxxx - your variant), change it and
    e) test&debug, test&debug, test&debug ... until it works the way you like.

Maybe you are looking for