Error in Comunication Channel Monitoring

Hi Friends!
I am triyng to connect a DB2 AS400 to PI 7.1 by JDBC Adapter, in the Comunication Channel Configuration is:
JDBC Driver -> com.ibm.as400.access.AS400JDBCDriver
Connection -> jdbc:as400://<Host>:<Port>/BDName
User -> XXX
Pas -> XXX
Now, in the NWA I deployed the driver jt400 Type Executable Jar File, and I created the "JDBC Custom Data Source Creation", with the same Parameters mentioned above
Well, My question is if I need to do something else?, Because in the Comunication Channel Monitoring show an error.. Exception caught during JDBC adapter processing: java.lang.NullPointerException
Somebody help me, Thanks!

Hi
There are two DB JDBC Drivers are available check reply by Bhavesh.
So check connection parameter according to your driver.
JDBC connection to DB2 Database

Similar Messages

Advance selection for source file-Error in communication channel monitoring

Hi all,
Referring to the link below:
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
I have developed my scenario in the same way.But due to the values <NOTHING>
in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
Plase note that our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
Thanks & Regards,
Sudhir Tiwari

Sudhir,
In the sender file adapter, you have an option called "Processing Sequence".
By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
Regards
Bhavesh

File to Proxy Scenario : Error in communication channel monitoring

Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
Chandravadan

Hi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani

Error in Communication Channel Monitoring

Dear All Experts ,
we are getting the below error message while posting the transaction in the communication channel monitoring. Pls advise to resolve the same.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIServer/UNKNOWN/ADAPTER.JAVA_EXCEPTION - com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve binding for the given channelId: Binding:CID=ae1e4075a0063170895328ec6f70c70d; at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBindingByChannelId(AbstractLookupManager.java:173) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:431) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:162) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:81) at com.sap.engine.services.servlets_jsp.server.servlet.AuthenticationFilter.doFilter(AuthenticationFilter.java:124) at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:73) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:461) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:298) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:396) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:385) at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:48) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:76) at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78) at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:243) at com.sap.e
Regards
Machindra Patde

Hi Machindra,
Check if the channel name specified in sender/receive agreement is correct.
If yes then delete the particular channel and create new one and specify that one in the agreement.

Page cannot be displayed error in Communication channel monitoring

Hi,
when i am trying to click on Communication channel monitoring from RWB it shows me the error " Page cannot be displayed".
I am testing this for the for the first time in QA environment.
But in development , CC monitoring works fine in the same Laptop.
I have checked the hosts file and it has the IP address and system name present in it.
i have checked in my collegues laptop and it opens there, but it doesn't open in my laptop.
we are using PI 7.0, windows XP and IE 7.0.
Could anyone help to solve this problem?
Thanks
JJ

I am able to open the communciation channel if i am using the path http://<full qualified host>:<http port>/mdt/channelmonitorservlet
This means that there is a problem in the host file....the changes are not getting reflected.....did you log-ff and then again login?
instead of the FQDN you can also open the page using the IP address of the server.
I am really sorry I am unable to give you points, since the Star icon is not displaying in the browser to award points
This may be because you did not mark the thread as a question
Regards,
Abhishek.

System Error in Comm channel monitoring of RWB

Dear all,
I have a Proxy to webservice scenario (HCM-PI-SuccessFactors). At receiver side i am using SOAP AXIS adapter. In RWB, the status of the channel is green and running. But when i ping the channel, it shows System Error.
I have made changes in respective communication channels, activated and cleared the cache. Still same error.
Later taken complete restart of system. Still same error.
How to overcome this ?
Note : 1) End to end scenario is working fine
2) Among the three trusted certificates installed, status of one certificate is showing warning (status: which will expire on may 5).
Regards
Uday

Hi Hareesh,
Thanks for you input. I have used the standard swc SFIHCM01. Here it is mentioned that it is applicable for SWC MESSAGING SYSTEM SERVICE 7.31 as shown below
What does this MESSAGING SYSTEM SERVICE mean exactly. In general is it our PI system.
plz correct me if i am wrong
Regards
Uday

Error for Communication Channel Monitoring

Hi
Getting the following error when trying to read the file using Content Conversion.
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 2 according to structure 'Tivoli_Row':java.lang.Exception: ERROR in configuration / structure 'Tivoli_Row.': More elements in file csv structure than field names specified!
Pls. suggest me where it's gone struck.
Regards,
Yeswanth.

Hi Gabriel,
I has given in sender comm channel
=>set processing mode : test
and in Receiver comm channel. am using FTP login
so, here i just read this file and then placed using FTP in R/3 system.
Now, am getting the following error.
Conversion of file content to XML failed at position 0: java.lang.Exception: ERROR converting document line no. 1 according to structure 'Tivoli_Row':java.lang.Exception: ERROR in configuration / structure 'Tivoli_Row.': More elements in file csv structure than field names specified.
even i checked my input data also...it's every thing fine.
File content : 32 fields
input data i has given : 32 fields showing correctly
Pls .give me the solution ASAP.
Regards,
Yeswanth.

FlatFile 2 IDOC: Error in Communication Channel Monitoring

The given below is the Audit Log:
===========================
Error convert()
Error: convertCalledFromModule()
Error: process()
Error process()
Error MP: Exception caught with cause javax.resource.ResourceException: --- Conversion of synchronous request from module chain ended with errors ---[Error:ID=3069;LEVEL=3] SegmentDescription: checkAndResetChildrenCounter() not enough repetitions of the segment S_BGM found: 0 instead of 1 offset :2588 DESCRIPTION: SegmentDescription Warning: Not enough repetitions of the segment S_BGM ([not specified]/[not specified]).
Note:
My IDOC has S_BGM with 1..1 occurance.
S_BGM is created at the target.
But still, the above excception.
Can any one provide the solution?

Hi,
The test is successfull in the IR.
Error shown in communication channel moni.
I hope, mapping a constant is not required here as S_BGM is a 1..1 (occurance)
Edited by: santosh kumar on Dec 19, 2007 12:53 PM

Error in Comunication Channel

Hi All
I have a IDOC to file scenario, in the file CC I use append,FCC with the paramater fieldfixlengths. All is well the file appends until a file comes trough where the CC fails because one of the field lengths is longer than specified in the fieldfixlengths, as soon as this happen the file previos appended files disappears. Is this suppose to happen or is there a way to avoid this from happening?
Any help will be appreciated.
Regards

Hi,
Yes, since the file is in append mode, this will happen.
U can do like this if possible only..
try to give the maximum expected length for all the fields and specify,
Records.fixedLengthTooShortHandling cut
or
Records.fixedLengthTooShortHandling ignore
As ur requirement.
Also refer once,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Babu
Edited by: hlbabu123 on Mar 11, 2010 12:56 PM

Error in JMS channel

Hi ALL,
I am getting the below error in Communication channel monitoring short log of JMS channel.
"Cannot connect because class 'com.ibm.mq.jms.MQQueueConnectionFactory' is missing; ensure that JMS provider library 'aii_af_jmsproviderlib.sda' contains all required resources"
This error looks like the deployed .sda file dint contain the class specified.Can u let me know where i can find the aii_af_jmsproviderlib.sda file with all required classes in it .
We are on SAP XI 7.0 SP 14 and the MQ version is 7.0.
Kindly let me know if any one had faced the same error.
Regards,
Rajesh

Hi, check this links.
XI to IBM Websphere Default JMS Provider with JNDI
JMS receiver adapter configuration error
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/frameset.htm
Edited by: Marco Salazar on Dec 9, 2009 5:24 PM

Communication Channel Monitoring Error

Hi...Experts,
we r doing RFC-SOAP scenario with out using WSDL file,
sender Communication Channel Monitoring getting error like this
Error in processing caused by: com.sap.aii.af.mp.module.ModuleException: call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden caused by: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden
In the Receiver Communication Channel Monitoring, getting error like this.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 403 Forbidden.
how can i rectify these errors, pls suggest me..
regards,
Pasi.

Hello Pasi,
Error: HTTP 403 Forbidden
Description: The server understood the request, but is refusing to fulfill it
Possible Tips:
Path sap/xi/engine not active
HTTP 403 during cache refresh of the adapter framework - Refer SAP Note -751856
Because of Inactive Services in ICF Go to SICF transaction and activate the services. Refer SAP Note -517484
Error in RWB/Message Monitoring- because of J2EE roles Refer SAP Note -796726
Error in SOAP Adapter - "403 Forbidden" from the adapter's servlet. Because of the URL is incorrect or the adapter is not correctly deployed.
Go through Micheal's Blog..
XI: Timeouts
/people/michal.krawczyk2/blog/2006/06/08/xi-timeouts-timeouts-timeouts
Thanks,
Satya Kumar

500 Internal Server Error - Channel Monitoring Audit Log

Hi Experts,
We are facing an error in the 'Audit Log' of the communication channel monitoring of a File Sender Adapter.
The channel uses a custom written Java Module which uses XSLT parser internally. The audit log displays the following error:
500 Internal Server Error
Error: "Application error occurred during the request processing."
Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
Details: "The WebApplicationException log ID is [4698F300D2C40C2000000000000009AA]."
This error occurs both when the file is processed successfully or when in error. In case of a positive test case file, we can even see the message reaching Pipeline (SXMB_MONI). But only the audit log does not show the processed steps in the channel monitoring and displays the above error message.
We have even established that the cause of the error is Java Module (First, we executed by removing our custom Java Module from the module steps and the audit log showed the steps correctly. But by putting the module back in the channel, the error resumed).
Initially, the error was not coming and we were able to test this properly. But over the time the audit log error started. Now, we are not able to get rid of this even by restarting the channel or restarting the Java stack of the server.
To me, it seems like a memory issue in the Java Stack.
Any thoughts?
Can we find out where to find the details of the WebApplicationException log ID displayed above?
Thanks,
Sudheer

Hello,
This could be generic but may helo you:
500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Regards,
Caio Cagnani

Sender Communication Channel Monitoring Error

Hi....Experts,
i am doing rfc-soap scenario synchronous . this is B2B scenario, under party i created business services, under this created 2 communication channels. in RWB, Communication Channel monitoring i am getting this error at sender side..
Error in processing caused by: com.sap.aii.af.rfc.afcommunication.RfcAFWException: only partyless services are supported but party : xxxxx is set for service sender business service name and sender CC name..
pls suggest me how can i rectify these errors..
for helpful answers i will give points*********
regards,
Pasi.
Edited by: pasi s on May 5, 2008 8:35 AM
Edited by: pasi s on May 5, 2008 8:40 AM

Hi Pasi,
Check if you are using the same business service (under which u have created the Channels) at sender side in configuration.
You have to use the same business serivce for sender under which your communication channels are created...................
Or
Create a sender communication channel in the service that u have used at sender side.............
So i think in your case there is a mismatch of using the diff sender service at diff stages.............
Hope this will solve your problem
Thanks
Sai
PS: kindly reward points if helpful

Getting the Error at RWB Communication Channel Monitoring

Hi,
I'm getting the following error message in the RWB - Commincation channel monitoring level. I have used teh Module configuration
for doing Asynchronous to Synchronous bridge ( File to RFC to File ) . For this I have used the following modules in my sender File adapter - 1 .AF_Modules/RequestResponseBean , 2. CallSapAdapter ,3. AF_Modules/ResponseOnewayBean.
My PI version is PI 7.0 (EHP 1 ,Service pack 5) This version will suport the bellow module configuration .. or not...?
I had done the scenario by folowing the same wiki .
http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File(Without+BPM)
But I'm getting the following Error messages
Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task.
Received XI System Error. ErrorCode: GENERAL ErrorText: com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task. ErrorStack:
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task..
Transmitting the message using connection http://TDX01SMX:8000/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task.
The message status set to FAIL.
Please suggest me any corrections.
Regards
Jain

Hi,
My communication channel was not stopped. and when ever I'm keeping a file in the source directory ,my sender communication channel becomming Red Led. and it was showing the Error status at RWB. If I removed the Module configuration that is working fine (for normal asynchronous process) But I need to get teh response message back to the Legacy file systems .
I'm sure that Module configuration only creating an Issue at this scenario.
My Version is PI 7.0 ( EHP- 1 with latest service pack 5). Please suggets me the corrective action need to be taken.
Regards
Jain

Capturing the communication channel monitoring error into an alert.

Hi,
The following is my scenario:
File adapter polls using file content conversion,if the source file is not in a proper format the file wont be picked up and communication channel will show error in channel monitoring.
I have to configure an alert for the same.
Can i capture the error message shown in communication channel monitoring and raise alert?
Many Thanks,
Pritish

refer todays thread on the same issue;
FILE ADAPTER ISSUE

Error in Comunication Channel Monitoring

Similar Messages

Maybe you are looking for