Error in Comunication Channel
Hi All
I have a IDOC to file scenario, in the file CC I use append,FCC with the paramater fieldfixlengths. All is well the file appends until a file comes trough where the CC fails because one of the field lengths is longer than specified in the fieldfixlengths, as soon as this happen the file previos appended files disappears. Is this suppose to happen or is there a way to avoid this from happening?
Any help will be appreciated.
Regards
Hi,
Yes, since the file is in append mode, this will happen.
U can do like this if possible only..
try to give the maximum expected length for all the fields and specify,
Records.fixedLengthTooShortHandling cut
or
Records.fixedLengthTooShortHandling ignore
As ur requirement.
Also refer once,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Babu
Edited by: hlbabu123 on Mar 11, 2010 12:56 PM
Similar Messages
-
Error in Comunication Channel Monitoring
Hi Friends!
I am triyng to connect a DB2 AS400 to PI 7.1 by JDBC Adapter, in the Comunication Channel Configuration is:
JDBC Driver -> com.ibm.as400.access.AS400JDBCDriver
Connection -> jdbc:as400://<Host>:<Port>/BDName
User -> XXX
Pas -> XXX
Now, in the NWA I deployed the driver jt400 Type Executable Jar File, and I created the "JDBC Custom Data Source Creation", with the same Parameters mentioned above
Well, My question is if I need to do something else?, Because in the Comunication Channel Monitoring show an error.. Exception caught during JDBC adapter processing: java.lang.NullPointerException
Somebody help me, Thanks!Hi
There are two DB JDBC Drivers are available check reply by Bhavesh.
So check connection parameter according to your driver.
JDBC connection to DB2 Database -
More than one sender with only one comunication channel
Hi experts.
I need to know that it is possible to make a one File FTP sender comunication channel with more than one host.
If that is not possible, how could get that functionality?
Thanks!
Regards.Hi Alvaro,
It is not a bad idea to do a report to search in the two locations, make a job for polling and later the report call via http or SOAP to PI itself (if you need to do any map or you need file content conversion) or not to use in PI scenario (neither http or SOAP call) if you only need to move files. I only see the next disadventages:
1. It is not a standard solution. This could be problematic in a SP uppgrade or PI version change.
2. If one day your client thinks to migrate to the PI java-only version, you would need to do again this scenario.
3. If you haven't any scenario in PI or a good documentation system, this interface can be forgotten for you or by future PI technician.
4. You lose the powerful of the monitoring tools.
Hope this helps.
Regards. -
File encoding in sender file comunication channel
hello everyboy,
i have a strange situation.
2 PI 7.0 installation: develop and production. Identical. Same SP level, java vm, etc etc
I have a interface file to idoc.
File sender comunication channel are FTP and with content conversion.
They are identical!!!!!!
but....
in production i added parameter File Encoding = ISO-8859-1 because if i have presence of strange characters....it work better.
the same files...in develop installation, they work without this parameter.
why?
there are a place maybe in Config Tool or j2ee admin tool where is set this parameter?
thanks in advance
Edited by: apederiva on Mar 12, 2010 3:55 PMHi,
Make sure your both the systems are unicode so that you will not have any issues. Also please see this document for how to work with character encodings in PI. Also we dont have any special config in j2ee admin tool.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/502991a2-45d9-2910-d99f-8aba5d79fb42?quicklink=index&overridelayout=true
Regards,
---Satish -
Advance selection for source file-Error in communication channel monitoring
Hi all,
Referring to the link below:
<b>/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter
I have developed my scenario in the same way.But due to the values <b><NOTHING></b>
in Mandatory fields Source Directory and Filename,i am facing problem in Communication Channel Monitoring as it shows an error;even though the end-to-end scenario works successfully.
Plase note that our scenario is not to exclude the particular file but to pick the files serially after a certain delay.
Kindly provide some idea about how can we remove the error from Communication Channel Monitoring.
Thanks & Regards,
Sudhir TiwariSudhir,
In the sender file adapter, you have an option called <b>"Processing Sequence"</b>.
By selecting ByName or ByDate you can make files get selected sequentially either ByName ( alphabetically ) or by the creation time stamp of the file.
In the sender file adapter also make the QOS as EOIO and give the QueueName as any value and the files will be processed sequentially.
Regards
Bhavesh -
File to Proxy Scenario : Error in communication channel monitoring
Hi,
I have developed File to Proxy Scenario on PI 7.1 system and it is not working. I see the below error in communication channel monitoring.
u201CError: com.sap.engine.interfaces.messaging.api.exception.ConfigException: Some of the IS access information is not available. SLDAccess property may be set to true, but SLD is not available.u201D
File will be picked from the FTP server.
I have created File system in SLD of type "Third Party", Can this be the issue?
Please guide me on this.
Thanks,
ChandravadanHi!
Check if the tcode SLDCHECK is ok!
Check note #764176.
Also, refer to link below and execute each steps from the links there MANUALLY.
Wizard-Based Configuration:
http://help.sap.com/saphelp_nwpi71/helpdata/EN/45/2e4c1b16bb4aa8e10000000a11466f/frameset.htm
Regards,
Caio Cagnani -
LMS 3.2 Internal Error in Communication Channel
Hello,
I am having an issue with the DCR in which I get the error "Internal Error in Communication Channel" after trying to edit the credentials of a device.
It started when I tried to add a device to the DCR, with all credentials, and it wouldn't show up in the DCR. I tried this 3x, but no luck. I was eventually able to do so by using the Bulk Import, and having the single device (with all the credentials) in the .csv file.
Now that the device is in the DCR, I need to edit the User Defined Fields - but when I try to, I get the error mentioned above.
I've seen other threads here that talk about multi-server setups, and FQDNs, but I'm not using any of that. I've also noticed that there is a bug ID for it, CSCtd07131, but it says 'release-pending'.
Am I up the creek until an update comes out? (its not just user defined fields, btw, I'm unable to modify any credentials.)
ThanksWhen you restart the ciscoworks processes you should always give a couple of minutes and log on when the cpu starts to come down.
If it continues to error when you add or modify you better open a case with the tac.
The bug you mention is only if you have multiple systems with a master and slave DCR
Cheers,
Michel -
Ciscoworks -- Intrenal error in communication channel
Hi Netpro Team,
I am getting an error "Intrenal error in communication channel" while editing or adding/deleting snmp credentials
in common services...(LMS-3.x);
We tried restarting the ciscoworks services, but still getting the same problem.
Please help to resolve this problemYes, Re-installed should take care of the issue..
However here the links for Patch (CS 3.3 and CS 3.2..apply which ever is applicable)
http://www.cisco.com/cisco/software/cart.html?imageGuId=9EE33249152B32176193349929E47597B46DC3C5&i=rs
http://www.cisco.com/cisco/software/cart.html?imageGuId=0C4F05EB3894563EC7BEC44C3E7D494AC34E9B88&i=rs
Thanks
Afroj -
DCR - error in communication channel
Hello,
We use LMS 3.1 with the available patches installed.
I wanted to configure some device credentials and identities.
After clicking "Apply" the following error was displayed:
"Internal error in communication channel."
I attached the dcr.log for further information.Hello!
I am having the same problem - sometimes I get the error message - sometimes not.
I am having on-access virus scanning enabled and do not want to disable the scanning on the NMSROOT directory.
Can you tell me the name of this process that causes this conflict?
Then I could disable the virus scanner for this process!!
Thanks! -
Error in back routing Error in communication channel
Hi Friends,
I am sending the Idoc from ECC250 to ECC150 using XI, whenever I am sending the Idoc, I got this error Error in back routing Error in communication channel in SXMB_MONI.
In IDX2 also I got this error I:000.
Please suggest me how to resolve this issue.
Regards,
Shalini ShahDid you cross checked all the configurations are in Place.?
I understand that the idoc has been received from ECC250 ,Are able to see the payload (i.e idoc )
in SXMB_MONI ?
IS configuration steps like
Receiver determination,
Interface determination
are correct?
Rajesh -
Error in communication channel javaxresourse.Resourseexception
We are getting an error in communication channel javax.resourse.Resourseexception. We are send a payload witn size in excess of 10mb. I also have a message which is in delivering status for quite some time now after which our communication channel stopped working and startwd to give tthis error. Could it because of this message ? Or i need to increase size parameter . In which tcode or place wherei can see the permited file size. I am new to pi and and seeing this error for tje firat time . Request your help
>Could it because of this message ? Or i need to increase size parameter . In which tcode or place wherei can see the permited file size. I am new to pi and and seeing this error for tje firat time . Request your help
Go to SXMB_ADM and click integration engine configuration -> click edit mode configuration -> see the tuning parameter EO_MSG_SIZE_LIMIT set and value of it. If it not set, talk to basis to set the this tuning parmeter and value desired.
Search SDN on this topic for further details -
Hi ALL,
I am getting the below error in Communication channel monitoring short log of JMS channel.
"Cannot connect because class 'com.ibm.mq.jms.MQQueueConnectionFactory' is missing; ensure that JMS provider library 'aii_af_jmsproviderlib.sda' contains all required resources"
This error looks like the deployed .sda file dint contain the class specified.Can u let me know where i can find the aii_af_jmsproviderlib.sda file with all required classes in it .
We are on SAP XI 7.0 SP 14 and the MQ version is 7.0.
Kindly let me know if any one had faced the same error.
Regards,
RajeshHi, check this links.
XI to IBM Websphere Default JMS Provider with JNDI
JMS receiver adapter configuration error
http://help.sap.com/saphelp_nw04/helpdata/en/10/b1b4c8575a6e47954ad63438d303e4/frameset.htm
Edited by: Marco Salazar on Dec 9, 2009 5:24 PM -
How to use two "field separator" in the same Comunication Channel
Hi experts,
I upload flat files with XI, and my Comunication Channel is configured to use the field separator "~".
FILA.fieldSeparator ~
Is posible to configure that Comunication Channel to accept two field separator. I want that upload flat files that has as separator "~" and flat files that has "|" .
thanks
regardsIT IS not possible to have 2 fieldseparator to identify the fields of a record.
-
Hi Experts,
Iam doing File-xi-File senario in which sender Adapter have to pick data from three different folders.How should i give the path in comunication channel,how to do this senario.
Regards,
Kumarif it is multiple directories then use <i>Advanced Selection for Source File</i> feature - http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Else in case it is multiple files ref - http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm -
Error occasional - faultCode: Channel.Call.Failed
Please help me
In my application occur this error randomly
faultCode: Channel.Call.Failed
faultDetail: 'NetConnection.Call.Failed: HTTP: Failed'
faultString: 'error'
http://www.rarusflats.com.br/Senap1.jpg
http://www.rarusflats.com.br/Senap2.jpg
I see this post and i Add a Blank Application.cfm, in folder
cfc , But not resolved
http://www.coldfusiondeveloper.com.au/go/news/by/jeff-douglas/20080523-flex-3-remoting-err or-channelcallfailed/
http://www.rarusflats.com.br/Senap3.jpg
Exist any solution to resolve this error of “faultCode:
Channel.Call.Failed” ?
And in COldfusion exist any Log to see error for this ?
I already tried that occurs when the error access the Gateway
of Flex
http://www.rarusflats.com.br/flex2gateway/
But when the screen is blank, in the case in operation
correct?Hi,
Can you please try tracing the FaultEvent.fault.rootCause
object and see if there is any error message. Usually exceptions
thrown from the server is available in this rootCause object.
Hope this helps.
Maybe you are looking for
-
Recently I keep getting a message that the storage is full on ipad2. If I have purchased videos or music, I will be able to have that content on my computer which has iTunes? I am not interested in iCloud because I have Dropbox that I am already payi
-
When I use the Ping.vi I get : Error 7 occurred at Open File+.vipen File Possible reason(s): LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, u
-
Trying to integrate with User Messaging Service adapter in SOA suite. Can it be possible through an JMS interface. I have an JMS backend integrated to Oracle B2B. Is it possible to send an email protocol message using JMS interface to B2B where User
-
Getting Error when trying to rebuild StoreFrontModule.jpr
Hi Frnds, Iam very new comer to ADF world. Iam folllowing steps to create FOD schema from the link http://www.oracle.com/technetwork/developer-tools/jdev/index-095536.html The Schema was built successful , Now iam getting numerous erros when the Stor
-
How to make the application offline
I have X7 phone and each day the amount of my pulse is decreasing. the internet is working but I didnt use it. How can I make the application become offline and not receiving updates. I already set my widgets to offline mode but it still like that. n