Error in configuration testing

Hi,
When I test a configuration in Integration Directory, the execution stops at the step of Interface Mapping and gives the error for its interface mapping as -
Interface Mapping <Not found>
Runtime error
Unable to find resource com/sap/xi/tf/_MM_CALC_.class (urn:tbit40:workshop:webapp, 1f08afe1-93ce-11da-ccfd-fb3fac190876, -1)
"MM_CALC" in above is the message mapping object.
The scenario was working earlier and it was not changed also. Still, why this error is coming ?
Regards,

Hi,
First check in IR if the interface mapping is working fine with the helpof Test tab. Activate the interface mapping again and do a complete cache refresh. In the ID do the Interface Determination again if the above steps donse'nt sole your problem. Also check cache notifications if it is fine.
Regards,
Prakash

Similar Messages

Error in AEX Itegrated Configuration Testing "No receiver agreement found."

Hi,
          I am working on PI 7.3, doing a File to Idoc by using the AEX(Advance Adapter Engine Extended). While doing the configuration testing i am getting the below error "
Problem occurred in receiver agreement for sender -BC_XXXXXXX to receiver -BS_XX5_100,urn:XXXX.com:POC:MasterData:Article:ECC:Sender.SI_OA_POC: No receiver agreement found for , BC_xxxxx, , BS_xx5_100, urn:xxxx.com:POC:MasterData:Article:ECC:Sender, SI_OA_POC."
        I gone through the SDN but not got usefull links. I tryied to recreating whole scenario, Cache refresh, but no luck. Can you pls let me know where is the problem. Do i need to do any additional configuration other than creating RFC in Java stack for AEX?
Thanks & Regards,
Dev

Hi RK,
        Thanks for your reply.
              Yes i have created the Idoc_AAE channel and assigned this channel in my Outbound Processing tab.
What do you mean by java channel in Inbound Processing? My sender is File so i created File channel and assigned in the Inbound processing tab.
@ Raghu,
            I have created the Receiver channel. I no need to create Receiver agreement because i am using the ICO so if i give the Receiver and Inbound interface details that is enough. And one more thing i am doing testing in ID Test confiuration.
Thanks ,
Dev

AppContainers_test fails with error during pre-test configuration checks

Hello,
AppContainers_test fails with error during pre-test configuration checks:
"[FAIL] The machine is not properly configured for testing: the test directory "C:\Windows\SYSTEM32\" is not ACL'd to allow execute permission for "APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES"
But that kind of permission for APPLICATION PACKAGE AUTHORITY\ALL APPLICATION PACKAGES was allowed, also i tried to allow full access, but error was the same.
In the test WindowsFilteringPlatform_Tests, the same requirement "REQ - Wfp-based products must not block App Container apps operating within their declared network intentions by default" was checked successfully.
How can i pass successfully AppContainers_test?
I installed lastest versions of QFE and filters on my server, but it didn't help.

Hi M'Alerter,
I have the same issue, have you found a solution to your problem ?
Cheers,
Ghalem

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.

u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Error while configuring CAF

Hi,
While installing Solution Manager SR2 on AIX 5.3, Oracle 10.2., we are facing a problem in phase 41 ( Configure CAF) , the log says that
INFO 2007-09-07 12:44:50
Output of /usr/java14_64/bin/java -classpath /usr/sap/SOL/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ -Xj9 com.sap.ctc.util.ConfigMainExt XXXXXX test:50000 J2EE_ADMIN XXXXXX is written to the logfile java.log.
INFO 2007-09-07 12:44:55
Execution of the command "/usr/java14_64/bin/java -classpath /usr/sap/SOL/DVEBMGS00/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/ -Xj9 com.sap.ctc.util.ConfigMainExt XXXXXX test:50000 J2EE_ADMIN XXXXXX" finished with return code 0. Output: Returning NULLConfigMainExtTYPE=A STATE=500 INFO_SHORT=Error connecting to http://test:50000/ctc/ConfigServlet?param=com.sap.ctc.util.OfflineConfig;PROPSHEETVALUE;CONFIGURATION=apps/sap.com/cafruntimeear/appcfg/application.global.properties,KEY=CAF_BW_DATASOURCE_NAME_PREFIX,VALUE=<E01>. The provided user data might be incorrect or user might be locked. CONFIGURATION=
ERROR 2007-09-07 12:44:55
CJS-30059 Java EE Engine configuration error. DIAGNOSIS: Error when configuring J2EE Engine. See output of logfile java.log: 'JSE'.
ERROR 2007-09-07 12:44:55
FCO-00011 The step configCAFPropSheet with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAFPropSheet was executed with status ERROR .
When we checked the user status for "J2EE_Admin" user ,it was locked, we unlocked it and tried , but it gave the same error.
Kindly help us out...
points will be awarded.
Regards,
S.S

The solution is mentioned in this thread:
Error on External Serrvice Configuration Page NW 20047s SP10
re-create your configuration if possible and see whether that fixes it

Error using the test console of the Oracle Service Bus 11gR1

Hi I am facing a an issue while using the test console of the Oracle Service Bus 11gR1 .
Every time I try to execute a business service or a proxy service I end up getting the following message.
Error Accessing Test Configuration
*"Test Console" service is not running. Contact administrator to start this service.*
In fact to add to my frustration I am unable to execute any of my proxy services from outside clients like SOAPUI as well.
Is anyone else facing this too ??
Also every time the server starts I can see some diagnostic error messages on my Eclipse console.
*[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.*
Attached the whole log at the end below.
To provide an update on my trouble shooting
1. ) I tried to give the IntegrationAdmin and IntegrationDeployer roles to my admin user. in fact i also tried to give it all the possible privileges.
Result: Still the same error message.
Error Accessing Test Configuration
"Test Console" service is not running. Contact administrator to start this service.
2.) I have already tried to change the following entry <java:alsb-test-console-debug>true</java:alsb-test-console-debug> in my C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\alsbdebug.xml
I am also attaching the file contents here
<java:sb-debug-logger xmlns:java="java:com.bea.wli.debug">
<java:alsb-stages-transform-runtime-debug>false</java:alsb-stages-transform-runtime-debug>
<java:alsb-alert-manager-debug>false</java:alsb-alert-manager-debug>
<java:alsb-credential-debug>false</java:alsb-credential-debug>
<java:alsb-jms-reporting-provider-debug>false</java:alsb-jms-reporting-provider-debug>
<java:alsb-management-credential-debug>false</java:alsb-management-credential-debug>
<java:alsb-management-dashboard-debug>false</java:alsb-management-dashboard-debug>
<java:alsb-management-debug>false</java:alsb-management-debug>
<java:alsb-management-user-mgt-debug>false</java:alsb-management-user-mgt-debug>
<java:alsb-module-debug>false</java:alsb-module-debug>
<java:alsb-monitoring-aggregator-debug>false</java:alsb-monitoring-aggregator-debug>
<java:alsb-monitoring-debug>false</java:alsb-monitoring-debug>
<java:alsb-pipeline-debug>false</java:alsb-pipeline-debug>
<java:alsb-security-wss-debug>false</java:alsb-security-wss-debug>
<java:alsb-service-account-manager-debug>false</java:alsb-service-account-manager-debug>
<java:alsb-service-provider-manager-debug>false</java:alsb-service-provider-manager-debug>
<java:alsb-service-repository-debug>false</java:alsb-service-repository-debug>
<java:alsb-service-security-manager-debug>false</java:alsb-service-security-manager-debug>
<java:alsb-service-validation-debug>false</java:alsb-service-validation-debug>
<java:alsb-test-console-debug>true</java:alsb-test-console-debug>
<java:alsb-transports-debug>false</java:alsb-transports-debug>
<java:alsb-uddi-debug>false</java:alsb-uddi-debug>
<java:alsb-wsdl-repository-debug>false</java:alsb-wsdl-repository-debug>
<java:alsb-wspolicy-repository-debug>false</java:alsb-wspolicy-repository-debug>
<java:alsb-security-encryption-debug>false</java:alsb-security-encryption-debug>
<java:alsb-security-module-debug>false</java:alsb-security-module-debug>
<java:alsb-sources-debug>false</java:alsb-sources-debug>
<java:alsb-custom-resource-debug>false</java:alsb-custom-resource-debug>
<java:alsb-mqconnection-debug>false</java:alsb-mqconnection-debug>
<java:alsb-throttling-debug>false</java:alsb-throttling-debug>
<java:alsb-flow-resource-debug>false</java:alsb-flow-resource-debug>
<java:alsb-flow-transport-debug>false</java:alsb-flow-transport-debug>
<java:alsb-flow-deployment-debug>false</java:alsb-flow-deployment-debug>
<java:alsb-debugger-debug>false</java:alsb-debugger-debug>
<java:alsb-console-debug>false</java:alsb-console-debug>
<java:alsb-result-caching-debug>false</java:alsb-result-caching-debug>
<java:alsb-bpel-debug>false</java:alsb-bpel-debug>
<java:alsb-jca-framework-adapter-debug>false</java:alsb-jca-framework-adapter-debug>
</java:sb-debug-logger>
starting weblogic with Java version:
java version "1.6.0_18"
Java(TM) SE Runtime Environment (build 1.6.0_18-b07)
Java HotSpot(TM) Client VM (build 16.0-b13, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\home11g\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server\lib\weblogic.policy -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\home11g\WLSERV~1.3\server -Ddomain.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1 -Dcommon.components.home=C:\Oracle\MIDDLE~1\home11g\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Djrockit.optfile=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.domain.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1 -Doracle.server.config.dir=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\servers\AdminServer -Doracle.security.jps.config=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\fmwconfig\jps-config.xml -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Digf.arisidbeans.carmlloc=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\Oracle\MIDDLE~1\home11g\USER_P~1\domains\OSB_DO~1\config\FMWCON~1\arisidprovider -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\home11g\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Dweblogic.jdbc.remoteEnabled=false -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\home11g\patch_wls1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_oepe1033\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\home11g\patch_ocp353\profiles\default\sysext_manifest_classpath weblogic.Server
<30-Jun-2010 16:22:43 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 16.0-b13 from Sun Microsystems Inc.>
<30-Jun-2010 16:22:47 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 >
<30-Jun-2010 16:22:48 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:22:48 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log.>
<30-Jun-2010 16:22:49 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<30-Jun-2010 16:22:56 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:22:58 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\access.log.>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<30-Jun-2010 16:23:06 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001110> <No test table set up for pool "wlsbjmsrpDataSource". Connections will not be tested.>
<30-Jun-2010 16:23:59 o'clock BST> <Warning> <JDBC> <BEA-001552> <The Logging Last Resource (LLR) data source wlsbjmsrpDataSource will not function when it is a participant in a global transaction that spans multiple WebLogic Server instances because remote JDBC support is disabled. LLR will function in single-server configurations.>
<30-Jun-2010 16:25:35 o'clock BST> <Alert> <OSB Security> <BEA-387068> <There is no PKI credential mapper provider configured in your security realm. Service key provider management will be disabled. Configure a PKI credential mapper provider if you need service provider support. This is typically the case if you have Oracle Service Bus proxy services with web service security enabled or outbound 2-way SSL connections.>
<30-Jun-2010 16:25:40 o'clock BST> <Warning> <WliSbTransports> <BEA-381917> <MQ Transport could not be registered due to : Missing MQ Library>
[ERROR] AdapterManager - ServletContainerAdapter manager not initialized correctly.
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log00005. Log messages will continue to be logged in C:\Oracle\Middleware\home11g\user_projects\domains\OSB_domain\servers\AdminServer\logs\OSB_domain.log.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.128.2.170:7001 for protocols iiop, t3, ldap, snmp, http.>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "OSB_domain" running in Development Mode>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<30-Jun-2010 16:26:11 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
This is really putting me off and its really disappointing to see all these issues in this new release.
How can oracle let a release slip in with such a Major Issue.
Please can any one help or provide a work around atleast.
Regards
Nitin

I guess till version 10gr3.1 you only needed to start one server and it allowed to access both admin and service bus console.Yes, in 11g as well you may access the admin and OSB console by just starting the admin server but in 11g OSB configuration gets deployed on OSB server (managed server) and test service also runs over this server.
Are you saying there is some other server I need to start just for running the test console ????Yes. Managed server osb_server1 needs to be started for deploying, testing and accessing OSB resources.
As If the OSB server was not running how can I check my published services, modify them and do all the bits and pieces after opening the open the service bus console but not just test them???You can modify and save your configuration without staring OSB server but if you will check in change centre then all the changes being done without starting OSB server will remain in partially activated state.
I have been using the service bus for 3 years and I have never faced any such issue.With each new release you may get new features and with a major release like 11g, architecture and functionality may change.
If it all there is some other server I need to start then whats the process to do so ??Open command prompt. Navigate to $Domain_Home/bin and run command
startManagedWeblogic.cmd <nameOfManagedServer>
for eg. -
D:\OFMW11g\mw\user_projects\domains\ofmw_domain\bin>startManagedWebLogic.cmd osb_server1
Once this server is up and running, try using test console.
Regards,
Anuj

Windows 8.1 Hyper-V - Error while configuring the hard disk 0xC03A0014

Hello. I have just enabled Hyper-V on my Windows 8.1 laptop.
Dell Latitude E7440 i7-4600U @ 2.10GHz
I can create a Virtual-Switch but I am unable to create a new Hard Disk or Virtual Machine within Hyper-V. I get the same error for both processes.
Error: The Virtual Machine Management Service encountered an error while configuring the hard disk on virtual machine New Virtual Machine.
Failed to create the virtual hard disk.
The system failed to create C:\Users\user\Documents\Test\New.vhdx .
Failed to create the virtual hard disk
The system failed to create C:\Users\user\Documents\Test\New.vhdx . A Virtual disk support provider for the specified file was not found. (0xC03A0014).
I have ran all Dell Client System updates and all of windows updates.
I have attempted to create a virtual machine on the current SSD and also an external drive. The same error appears.
I have also attempted to create a virtual hard disk via Hyper-v with a Base vhdx, still the same error occurs. I've tested the base image on other laptops of the same model and windows 8.1 without issue.
Any thoughts on how I can fix this?
Thank you,
-Jake

Hi Jake,
"Enable Data Execution Protection (DEP) in the BIOS and make sure the Format of drive file system is not fat32.
1. Uninstall Intel Active System Monitor 3.0, if installed.
2. Disable "Intel IPMI Service" and "Intel Monitoring Agent" Service.
3. Open regedit and locate: HKLM\System\CurrentControlSet\Services\imbdrv.
4. Change the Start Key to 4 (Disabled).
5. Locate HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E97D-E325-11CE-BFC1-0 8002BE10318}.
6. Take ownership of the ‘Properties’ key.
7. Give yourself full permission for this key.
8. Now locate the properties key; if you see a ‘Security’ entry there, that is your problem. Delete this key.
9. Try attaching or adding the VHD again after rebooting.
If above steps did not help, add the Network Service account to Local Administrator group."
It is quoted from the similar thread below :
http://social.technet.microsoft.com/Forums/windows/en-US/55085ff3-0f26-41bd-b590-bb3490e2d6f5/win-7-professional-a-virtual-disk-support-provider-for-the-specified-file-was-not-found?forum=w7itprovirt
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

[svn] 3526: The call to the TestNG task in the configuration test framework had haltOnFailure set to true which is not what we want .

Revision: 3526
Author: [email protected]
Date: 2008-10-08 14:21:40 -0700 (Wed, 08 Oct 2008)
Log Message:
The call to the TestNG task in the configuration test framework had haltOnFailure set to true which is not what we want. Failures will get logged to the database at which point we can review them.
Also fix a failing test.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/jms/NoJNDINameT est/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/jms/NoJNDINameT est/services-config.xml

I have a standard Ant build script for signing a jar file. I import it into my master Ant build files with
<import file="Sign.xml"/>
and then in my master Ant script I setup the name of the jar file e.g.
<property name="jar-file" value="${fun}/FunApplet.jar"/>
and then invoke a target
<target name="sign-jar" depends="jar, sign">
</target>
Since this target (sign-jar) depends on target 'jar' and target 'sign' it executes the 'jar' target and then the 'sign' target that is contained in Sign.xml.

Mapping debbuging error:DBG1006: Error while initializing test data

Hi,
I have created a mapping in which I am trying to delete data from a table based on exisitence of rows in another table with a filter condtion in between them.When i try to run the debbugger, it throws following error:
============
Analyzing map for debug...
Retrieving Control Center connection info...
Connecting to Control Center schema...
Checking character set of Control Center schema...
Configuring sources and targets...
Mapping Debugger Error:
oracle.wh.service.sdk.mapping.debugger.WBMappingDebuggerException: DBG1006: Error while initializing test data for sources and targets:
oracle.wh.repos.sdk.CMPException: Trying to access invalid Object.
Element ID: 110138
Status: 4
Owning FCO: 98409
==================
Any idea what could be the possible cause?
Query which I am trying to simulate is of following type:
Delete from TableA t1
where exits(select 1 from TableB t2 where t1.col1 = t2.col1 and t2.col2 = 'delete')
Thanks
AJ.

Oops..thats weird.
Tell me one thing...then how gud is the code generated in terms of working...if someone has to really test the code pre-hand for expected business logicWhy i am raising this concern is becoz there are many features for which OWB provides support in indirect way(workaround) like exists/not exists.
Do we need to deploy mapping each time and then test through a run from Control centre?
Other thing, As far i understand, the code generated is not in such a format that one can directly copy paste it in any sql/plsql editor and test it...
Regards
AJ.

Dac error while configuring

Hello All,
I am trying to configure Dac on windows7 64 bit but getting the error...
Configuration: Windows7 64bit
Oracle DB: Oracle 11g
Dac Version : 10.1.3.4.1
Informatica: 9x
Obiee 11g
Already copy the file odjbc5.jar file into dac_home\bifoundation\dac\lib
Created the user Dac_rep with all the required privileges.
But still getting below error while configuring and testing:
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: java.sql.SQLException
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::The Network Adapter could not establish the connection
EXCEPTION CLASS::: oracle.net.ns.NetException
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
::: CAUSE :::
MESSAGE:::Connection refused: connect
EXCEPTION CLASS::: java.net.ConnectException
java.net.PlainSocketImpl.socketConnect(Native Method)
java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
java.net.Socket.connect(Socket.java:519)
oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:141)
oracle.net.nt.ConnOption.connect(ConnOption.java:123)
oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:337)
oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1042)
oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:301)
oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
java.sql.DriverManager.getConnection(DriverManager.java:582)
java.sql.DriverManager.getConnection(DriverManager.java:185)
com.siebel.etl.gui.login.LoginDataHandler$LoginStructure.testConnection(LoginDataHandler.java:514)
com.siebel.etl.gui.login.LoginDataHandler.testConnection(LoginDataHandler.java:386)
com.siebel.etl.gui.login.ConnectionTestDialog$Executor.run(ConnectionTestDialog.java:290)
Kindly help, already googled but no luck.
Thanks & Regards
Anu

Check your config.bat config
just in case refere this Oracle BI Solutions: DAC - Installation and Configuration v10.1.3.4.1 on Windows

In RDS Configuration, Test Connection is Succeful, but Test Debugger fail?

In RDS Configuration, Test Connection is Succeful, but I click Test Debugger
Test Debugger failL
"it said : An RDS connnection was established but the ColdFusion RDS line debugger could not be contacted. The server gave the following message: Coldfusion line Debugger is not enabled."
My Server is running normal, connection is OK! How to fix?

@waveset wrote:
Just concentrate on Username and Password. They are defintely not correct and as said by snowdog.Thank you for Snowdog and @waveset for your quick response.
Yes, "admin" and password "****" are an example about a user created in AD1 with rights enough to create and search objects in AD.
But I thing the problem is not the user. Could it be the password encryption?
I post a part of trace file for more information:
20080103 11:21:36.640 service-j2ee-3(0x0108c497) ADSIResourceAdapter#getResponseBytes() Data [0x03b0]: 6f 00 6e 00 73 00 65 00 3e 00 0a 00
20080103 11:21:36.674 service-j2ee-3(0x0108c497) ADSIResourceAdapter#getResponse() Exit returned= <?xml version='1.0' encoding='UTF-16'?>
<Response>
<Result status='error'>
<ResultItem type='message' status='error'>
<Message>
<Text>Error opening object 'LDAP://CN=Users, DC=mydomain, DC=vodam, DC=local': ADsOpenObject(): 0X8007052E: , 8009030C: LdapErr: DSID-0C09043E, comment: AcceptSecurityContext error, data 0, vece, Logon failure: unknown user name or bad password.
</Text>
</Message>
</ResultItem>
</Result>
</Response>

Mapping error "Dynamic Configuration Is Empty"??

Hi-
we have a scenario where we map a SOAP message from a webservice to call a function module in SAP ECC via RFC and then map the returned parameters as response to the webservice.
We have configured everything and I get the following error in the test configuration and I can't figure it out. I checked that the cache is up to date, but now i run out of ideas what to check.
Any help is greatly appreciated.
With kind regards
Bj
Interface Mapping
java.lang.NullPointerException

Hi,
Check the URL specified when you define the webservice for your outbound interface. If you have specified the right business system/service and communication channel name.
check it url
http://solmgr:50000/XISOAPAdapter/MessageServlet?channel=:SOM_BS_SOAP2RFC_SOAPSEND:SOAPSENDER
This is the URL which needs to be given, the colon needs to be there before the business system name
See the below links
Troubleshooting SOAP Message - XI - Troubleshooting SOAP Message - XI
Troubleshooting - RFC and SOAP scenarios-Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
Exposing BAPI as Web Services through SAP XI -Exposing BAPI as Web Services through SAP XI
Consuming XI Web Services using Web Dynpro Part II-/people/riyaz.sayyad/blog/2006/05/08/consuming-xi-web-services-using-web-dynpro-150-part-ii
Consuming XI Web Services using Web Dynpro Part I -/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> XI -> WebService - A Complete Walkthrough (Part 1)
You dont need to use SOAP to keep your RPC clean ...
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
SOA vs RFC: it doesn't have to be Charles Bronson vs Henry Fonda
The specified item was not found.
Regards
Surya

Error in configuring SOA from jdev 11g TP4

i get an error while configuring SOA from jdev 11g, error is in Test DB setting in first step. These are the details
DB Connection String : localhost:1521:XE
DB User Name: adrs_soainfra
DB Password: welcome1
error is “There was a problem in establishin a test connection to [localhost:1521:XE]. please review your Database settings and retry(oracle.jdbc.driver.T4CTTIoer processError
SEVERE: Throwing SQLException: ORA-00942: table or view does not exist
942
DB is up and connected via SQLPLUS. All required env parameters are there i.e ORACLE_HOME, PATH, ORACLE_SID

This error is due to the scripts not being run correctly. Read the instructions carefully and run them again. The first script is run as user "sys", the second one as your user you indicate in the parameters to the first script. Make sure you use the _all scripts.
Heidi.

[svn] 4534: Add configuration tests for flexclient, destination and services

Revision: 4534
Author: [email protected]
Date: 2009-01-14 16:02:42 -0800 (Wed, 14 Jan 2009)
Log Message:
Add configuration tests for flexclient, destination and services
checkintests: passed
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/erro r.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/serv ices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/dest-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/e rror.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/s ervices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/error. txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/servic es-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/error. txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/servic es-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/error.tx t
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/services -config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/er ror.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/se rvices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/e rror.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/s ervices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/erro r.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/serv ices-config.xml

Revision: 4534
Author: [email protected]
Date: 2009-01-14 16:02:42 -0800 (Wed, 14 Jan 2009)
Log Message:
Add configuration tests for flexclient, destination and services
checkintests: passed
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/erro r.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/DuplicateIdTest/serv ices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/dest-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/IncorrectRootElement Test/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidAdapterRefTes t/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/e rror.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidChannelTest/s ervices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/error. txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/InvalidIdTest/servic es-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/error. txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NoAdapterTest/servic es-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentAdapterTe st/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelAt trTest/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/destination/NonExistentChannelTe st/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/error.tx t
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/factories/InvalidIdTest/services -config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/er ror.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/InvalidTimeOutTest/se rvices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/e rror.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/flexclient/NegativeTimeOutTest/s ervices-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidDefSecConstraint Test/services-config.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/erro r.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/services/InvalidIncludeTest/serv ices-config.xml

Error reading configuration file

I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
[] 2012-12-20 22:46:32,176 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
[] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
 at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
 at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
 at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
 at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
 at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
 at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
 at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
 at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
 at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
 at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
 at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
 ... 7 more
Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
 at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
 at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
 at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
 at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
 at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
 at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
 at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
 at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
 at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
 ... 9 more
I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
Any ideas of why the Validator.bat can't read the configuration file?

I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
I have my license server setup (its the Protected Streaming version).
I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
I am using the local key mode to remove one more variable (I have setup a remote key server as well).
I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
DRM error Major[3363] minor:[0] NSError:(null)]
From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
Colour me frustrated

Error in configuration testing

Similar Messages

Maybe you are looking for