Error in contract accounts: GETWA_NOT_ASSIGNED

hie gurus
im getting a dump whilst trying to save contract account descriptions thru customizing. the error GETWA_NOT_ASSIGNED is given. the menu path is
spro - financial accounting - contract accounts receivable and payable - basic functions - contract accounts - number ranges and contract account categories - configure contract account categories
thnx in advance

finaly resolved to create a custom program to save the contract account descriptions. Through config the contract account is created then description is inserted through a z program to modify the entry in the database. the table for contract account categories is tfk002at.
Regards
Prince

Similar Messages

Contract Accounts Receivable and Payable is not installed in the system

Hi ,
while i am executing EC sales list report i am getting the error as "Contract Accounts Receivable and Payable is not installed in the system".
could you please explain me what is contract accounts receivable and payable means and how to install it in the system.
Thank you.
Best regards,
Rajeswari

Typically this is installed with an Industry Solution, such as Utilities or Schools, were you have thousands of customers/accounts.
Most places probably just use the standard AP/AR functionality.
Thanks,
Tammy

Error Message occured in creating a new contract account

When we were trying to create a contract account for a business partner, we were stuck at this point with an error message stating u201CAccount holder relationship is not uniquely definedu201D.
If anybody could tell us how to overcome this erroru2026 we would be pleased to proceed
With Regards

You won't be able to delete the existing account in order to set up a new one without the password for the old account. If your father doesn't remember the password, he can reset it as explained here: iCloud: Change your iCloud password.

Error while creation of Collective contract account

HI experts,
While creating Collective contract account thru CAA1,i am getting Error as "is collective invoice acct category but collective invoices not active" though i have defined no ranges & have done necessary config. Pls help me in this regard thru ur valuable experience.
Regards,
Raman

Hi Raman,
That should be error >3573.
Set field 'Collective Bills' (XUSSR) in table TFK000C and that should workout for you. Through SM30 or
Customizing -> Fin Acctg -> Contract Accounts Receivable and Payable -> Basic Functions -> Posting and Documents -> Basic Settings -> Maintain Central settings for posting.
Best regards,
David
Edited by: David Tonade on Nov 27, 2009 3:39 PM

Error in BP transfer No contract account for premise- move out not possible

Hi experts,
I am trying to transfer a BP from its current premise to another premise in the Web IC screen. While doing so i am facing the error saying that " No contract account for premise->move out not possible". I checked the contract account for the premise through normal premise search and it is existing.
I am facing this problem only when i am trying to transfer the BP which has multiple premise, for BPs having single premise it is working fine.
Request you to help me in this regard.
Thanks and regards,
Madhukar.

Hi bigdogtim7,
Please check your inbox.
Thanks!
Linksys Support
http://support.linksys.com

No-determination of Contract account in sales order

Hi All,
I have created a Business Partner and created a contract account for the same, but while creating sales order for the same BP, system is asking for contract account, and not allowing me to enter the same in line item,
giving an error message and exit from the screen.
help will be appriciated,
thanks in advance,
Kapoor N

Hi Dewang,
I have Copied the message pls check,
I have assigned 3 Conract accounts to this business partner but system shows me a warning message, "no contract account found" when i goto item--> Billing Document tab at that time system gives me the below mentioned error.
thanks for your help in advance,
Kapoor
Contract does not exist
Message no. E9011
Diagnosis
You have specified a record that does not exist in the database.
System Response
If you created the specified record in a previous workstep, the update process is not yet completed. Or, the process may have been canceled.
Procedure
In the case of an update process still being carried out, wait until the update of the desired record is completed.
In the case of a canceled update process, determine the reason for termination.
It is also possible that you have entered data incorrectly. Check your entry.

FI CA ( Contract accounts payable)

I don't know whether this is the right forum for asking this question:
When I am trying to create a contract account in FI CA I get the following error message
Account holder relationship is not uniquely defined
Account holder relationship is not uniquely defined
Message no. >3579
Diagnosis
Just one account-partner relationship must be flagged as the account holder relationship.
Procedure
Select the contract partner for the account that is to be the account holder, and mark the account-partner relationship as the account holder. Choose all other partners for the account and assign another account-partner relationship for these.
Appreciate help in resolving the above issue.
Regards

Hello kamal Hassan (nice Name )
That is because you dont have the account holder relationship maintained in the SPRO. please use the following path
SPRO -> Financial Accounting -> Contract Accounts Receivable and Payable ->Basic Functions ->Contract Accounts ->Contract Account Relationships
there is a check box field AH for the relationship you are using, make sure you check it. Let me know, if you still experience the issue
Thanks and Have a Great Day,
Ganesh

Update Contract Account in Background - BOR "ISUACCOUNT" Method "Change"

Hi Experts,
We are trying to update the "Dispatch Control" & "Alternative Bill Recipient" fields on the Contract Account in background.
We are using BOR - "ISUACCOUNT" and Method - "Change". The Method is unable to update the field values but not giving any error or exception.
Please sussest if someone has worked on such scenario before.
Thanks,
Ankur

Hi ,
Is it tiggering ur BADI implementation or not ? If yes then whats ur logic to update ?
regards
Prabhu

BAPI Create Contract Account in Module PSCD

Hi all,
I have a requirement create Contract Account (TCode CAA1) in module PSCD by BAPI.
I use BAPI : BAPI_CTRACCONTRACTACCOUNT_CR1.
I set value for some required parameters and Perform BAPI, i receive 2 error messages in RETURN parameter :
- Enter a value in field Account Determ. ID
- Enter a value in field Payment Terms
I don't know where to set value for Account Determ.ID and Payment Terms in BAPI.
I searched description of BAPI parameters but there is no BAPI parameter suitable.
I also searched on this forum but no topic found.
Pls help,
Thank.
nvsinh.

Hi all,
The problem is solved.
The proplem comes from release version of ECC6.
Thanks all,
Sinhto

Business partner changing in contract account

Hi, all.
Inform, please, somebody by experience, whether it is possible business partner change in contract account?
At creation of the contract account the incorrect business partner was wrongly specified. In result one business partner had two contract accounts (one not him), and other business partner - any. This error was detected not immediately and exists several already billed and invoiced periods for today.
Whether it is possible somehow assign to the contract account of other (correct) business partner (instead of existing) or transfer the contract account (without change its number) with all contracts from one business partner to another?
Thank in advance.

You have a few options: execute a customer change or use the account holder functionality, or reverse all transactions and redo with correct partner.
The account holder would enable you to keep the account number, but it only allows you to add a new business partner as related. You cannot remove the current business partner relation, and thus might not be appropriate.
The customer change process moves the contracts and account from one bp to another. This will result in a new account number.
Lastly, you can reverse the bills and moves, and then re-execute them with the correct bp.
regards,
bill.

Tax Exemption for a Contract Account

Dear Experts,
A tax is raised during invoicing of electricity bill for all Contract Accounts. I have a requirement where I have to exempt tax for some Contract Accounts. The tax code has been defined in IMG in Financial Accounting.
When inputting the Tax Code in CAA2 in the Tax Exemption grid, I get the error message - 'Enter a valid tax procedure' .
Have I missed a Config?
Kindly advise
Malini

Dear Richa,
Find below the configuration done:
1) Financial Acctg >>Fin Acctg Global Settings >> Tax on Sales/Purchases >> Calculation >> Define Tax codes for sales/Purchases>> Define Tax code
2) Financial Acctg >>Fin Acctg Global Settings >> Tax on Sales/Purchases >>Basic Settings >> Check Calc Proc >>
(a)Define Cond type (b) Define Proc
3) Financial Acctg >>Fin Acctg Global Settings >> Tax on Sales/Purchases >>Basic Settings >> Check & Change settings for Tax Proc
4) Financial Acctg >>Fin Acctg Global Settings >> Tax on Sales/Purchases >> Postings >> Define Tax Acc
5) Financial Acctg >> Contract Acc Receivable & Payable >> Basic Functions >> Doc >> Maintan Doc Assignment >> Maitain Transanction for ISU/IST > Define Acc Assignment for Auto Posting >> Auto GL Acc Determination >> ISU Define Acc Assignement Data Relevant to Transaction
6) Financial Acctg >> Contract Acc Receivable & Payable >> Basic Functions >> Postg & Doc >> Doc >> Define Acc Assign >> Auto GL Determination >> Define Acc for Sales & Purchases Tax
7) Financial Acctg >> Contract Acc Receivable & Payable >> Basic Functions >> Postg & Doc >> Doc >> Maintain Doc Assign >> Define Sales/Purchases Tax Determination
Have I missed something?

Unable to create Contract account

I am unable to create contract account. I am getting the error message as "Key selection not defined for application R company code List of budget billing proceuders(R301)"
How to go further?

Hi, Jack
Did you go to the path I indicated? In there, for each company code, you need to maintain which budget billing procedures you allow.
0 means no BB procedure.
SAP says:
"If you enter 1 (statistical procedure), budget billing requests are managed as statistical items in the Contract Accounts Receivable and Payable (FI-CA) component and do not affect the general ledger.
If you enter 2 (debit entry procedure), budget billing requests are posted as partial bills.
If you enter 3 (payment plan procedure), the budget billing amount is requested as the new bill amount instead of the bill amount determined by billing and invoicing. The difference between the actual bill amount and the payment plan amount is managed in a special item. This procedure is used for monthly billing.
If you enter 4 (payment scheme procedure), the bill amount is integrated into the budget billing plan. The bill can no longer be paid separately. The budget billing requests are posted as statistical items in the same way to the installment plan.
If you enter 5 (down payment request plan), a special payment plan is created for industry customers. This plan is suitable for industry customers with monthly periods as the down payment plan for the month after next. To use this procedure, establish the settings in Customizing."
After that, you need to maintain all the activities related to the BB procedures you want to use, in SAP Utilities / Invoicing / Budget Billing Plan. Check all activities and see what you need to customize.

How to invoice on collective contract account?

HI,
Can any one please let me know how to invoice on collective contract account level. I am new to this concept, at the individual contract account level the billing is happening but when we do on collective contract level, getting an error as there is no contract to the collective contract account.?
Please reply as soon as possible as it is very urgent.
Regards,
Moin

Moin:
Please read the Research Resources and Rules of Engagement and then search the available resources before posting basic questions about functionality. There is plenty of information available about the collective invoice process in the help (and previous threads) - this thread is locked.
regards,
bill.

IS-U contract accounts to CRM (Business agreement)

Hi There,
can anyone help on the issue of replicating IS-U contract accounts to CRM, what steps do i follow?
Regards
A

Hi Anup,
in the SAP standard installation facts are never replicated from IS-U back to CRM. In that respect the MDTs are a one way tool. If you enter some values in a contract in CRM (e.g. configuration values via the simplified configuration) these values can be used to populate installation facts in IS-U upon replication. However, if installation facts are changed in SAP IS-u no replication to CRM is triggered. The underlying reason is, that only the objects BP, contract account, contract, connection object and premise are replicated between CRM and IS-U.
IF you want to show the installation facts together with a contract in CRM you have got two options. Either build a custom view that displays the installation facts for a contract or implement a custom replication logic. I'd recommend the first approach as it's less error prone and easier to implement.
We've also implemented the first approach for one of our customers. Let me know if you need further information.
best,
Christian

Contract Accounts - Post new document - FPE1

I'm posting new document in Contract Accounts with FPE1 and i have three errors
- G/L account could not be determined
- The acct assgmt data relevant to the main trans. do not provide G/L acct
- G/L account does not exist
I was searching on this forum, but no result... Can you give me some links or information how to solve it, please!
Eugene.

Error Long Text:
G/L account could not be determined
Message no. FSC1011
Diagnosis
The system could not determine a G/L account for company code 9999, account determination ID 01, main transaction 0010, and subtransaction 0010.
System Response
Error message
Procedure
Change the posting specifications or check the system settings.
Choose Maintain entries or Customizing.
How we can solve it?

Error in contract accounts: GETWA_NOT_ASSIGNED

Similar Messages

Maybe you are looking for