Error in Custom "Non Po Invoices" module

Hi All,
I did migrate the oracle 11i custom “Non Po Invoices” module into R12. I’m able to run the “Create Non Po invoice page” without any error, but when I try to submit the invoice, I’m getting error like
“Invoice Number - Set method for attribute \"InvoiceNum\" in NonPoInvAM.NonPoInvHdrCreateVO1 could not be resolved”.
I tried some option which one I know. But I’m not able to fix it. Could you pls help me on this?
Thanks
Chandra

Try generating rowimpl class again and also chcek that the corresponding attribute is there in the table in DB.
--Mukul                                                                                                                                                                                                                                                                           

Similar Messages

  • Non PO Invoice Workflow - Error while Posting Document

    Hi Experts
    Hope I am posting this in the right forum as I am new to SDN!
    We have customized a multi-level non PO invoice workflow which triggers at the time of clicking 'Save as Completed' in tcode FV60.
    It has been configured to automatically post the document once it is approved at all the required levels. However, the document cannot be posted even after it receives all levels of approval. The status shows as 'Complete' but the error message shown is 'No Amount Authorization for Customer/Vendor in Company Code' in the workflow screen (MSGID F5, MSGNO 155).
    Now as I understand, this is the error for maintenance of user ID in tolerance groups. However, all user IDs have already been maintained and no matter who parks the document, the same error appears in the workflow screen.
    We have no idea whether this is happening due to some missing config from FI side or WF side.
    Regards

    Hi
    Go to Tcode: OBA3 Assign tolerance group under your company code and give all limits for each group. If you done this one your properly your problem should solve.

  • Non PO invoices sent for Approval - getting error message - Tax Jurisdictio

    Hi Experts,
    Our clients have just upgraded from SAP 4.6C to ECC 6.0 and when the Non -PO invoices are sent for approval the user is getting the below error message.
    'Specify a tax jurisdiction key' - Message no. F5566
    Could any one suggest what the reson could be.
    Answers would be suitably rewarded.
    Thanks in advance,
    Manish Singhi
    E- [email protected]

    Hi,
    Can anyone suggest on this.
    Thanks,
    Manish

  • Non-po invoice posting using IDOC into LIV module

    Hi,
    does anyone know if idoc interface is available for posting non-po invoice as an LIV invoice into MM module. what  I found that I can post the idoc to FI module directly using message code - FI.
    Thanks.

    Hi
      I Got your name from this site.I would be very thankful if you can help me here.I am designing a EDI based invoice LIV.Is it possible to post some charges which are without PO reference but are coming in Vendor Invoices.Is it possible to post these kind of charges with EDI message INOIC01 or we have to post through FI posting.If possible through EDI in which segment of IDOC we will enter these charges with amt.Also is it possible to post credit memo also with EDI
    Thanks
    Sanjeev

  • Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

    Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

    I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

  • NON PO INVOICE

    hi,
    i have created Non PO invoice in EBP and posted successfully.
    idoc message type = BBPIV
    when it reached to ECC and getting status 51 (reason Application document not posted Payment method and payment terms are mandatory).
    when i am processing with WE19 in foreground, message is functional module IDOC_INPUT_BBP_IV .
    what is the FM to process this idoc or correct message type?
    regds
    Rami

    HI Nikhil,
    thanks for your reply.
    process code exits(ZIV01) as per note in ECC.
    idoc is not posted, status 51 (error is payment method and payment term not mantained, payment term i have entered in invoice in EBP)when iam processing inbound FM  through WE19, error is interface for function IDOC_INPUT_BBP_IV is incorrect.
    my doubt is this same FM and message BBPIV can be used for both PO invoice and Non PO Invoice?or there is different
    message for Non PO invoice?

  • Error in adding A/R Invoice - 'No Matching Records Found'

    Hi Folks,
    This one is related to 'thunderclap8's post last month (June 01, 2011)
    As we create an A/R Invoice, we have encountered an error that says:
    [A/R Invoice  Rows  Warehouse Code] [line: 0] , 'No matching records found  'Inventory Log Message' (OILM) (ODBC -2028)'  [Message 131-183]
    As with the process, the supposed A/R Invoice we're making came from a Delivery/Release that came also to a Sales Order.
    But when we make the same transaction for other Customers, it ends successfully. I'm not trying to point out that it's because of the Customer since the error shows inventory-related concern.
    Any theory on how did it come to this? and any remedy?
    Thanks!
    Fringe

    Hi Raja!
    First and foremost, I would like to thank you for your answer.
    I have checked it and there are no restrictions involved with the item nor with the BP.
    I can't exactly determine the cause of this error.
    I believe you do have other suggestions, don't hesitate to post it here.
    Thanks!
    Fringe

  • Non PO invoice posting in ECC from SRM

    Hi,
      We are creating non-PO invoice in SRM and upon approval, its posting in ECC as a material document, but the problem is that it is created without any line items. All the header information is passing fine only line item info is missing and it is going to parking status. There are no errors in IDOC transmission.
    Thanks,
    Sreedhar

    Freinds,
      Any thoughts on this?
    Thanks,
    Sreedhar

  • Error while creating inter-company invoice  for stock transport

    Hi ,
    I am facing following errors while creating inter-company invoice for STO order.
    We have scenario where standard PO is created in  company code A  & then replenishment delivery is created in company code B.While raising inter-company invoice to company code A, we are facing problem.
    In replenishment delivery we have 10 line items. But  when we try to do inter company invoice through VF01/VF04 we get following log
    XXXXXXXXXX(delivery Number) 000000 Customer XXXXX: Customer master table KNVV is missing (VF-022)
    XXXXXXXXXX (delivery Number)000010 The bill-to party could not be determined (VF-047)
    XXXXXXXXXX (delivery Number)000010 The payer could not be determined (VF-048)
    With this first line item from delivery is not flows to invoice & if we saves this invoice then it is get saved with account determination error as some of the data does not comes into invoice header like account assignment group for customer, Payment term, destination country,region, tax classification for customer etc. That means invoice gets created without first line item from delivery with account determination error & so,no accounting document gets generated.
    I checked customer master for all SP,SH,BP,PY they are correctly maintained.This was working fine few months back, but not working now.
    If anybody had come across such kind of scenario, your valuable inputs will be highly appreciated.
    Thanks & kind regards,
    Ganesh Palatshaha

    Hello
    Kindly check the sales area of customer involved, whether the customer maintain with sales area for STO.
    If that is note the case the refer following link:
    - Error VF 047 & 048 while creating Inter company billing
    Regards
    JP

  • Bapi for vendor non po invoice parking

    Hello,
    We have a requirement to Create a Non PO Invoice and also parking invoice.
    I could able to create Vendor Invoice (Non PO) using BAPI: BAPI_ACC_DOCUMENT_POST.
    But i am unable to find a BAPI for Parking the Vendor Invoice (Non PO). When i try to use BDC on FB01 transaction for creating Parking Vendor Invoice, it is throwing an error that "Parking Invoice creation is not allowed in batch input".
    Can anybody help me for creating Parking Invoice (Non PO).
    Note: There is a BAPI: BAPI_INCOMINGINVOICE_PARK, which wont support for Non PO Invoice creation. It is PO based.
    Thanks in Advance for your support.
    Thanks & Regards,
    Sreedhar.

    Hi,
    Please see the given link, hope It will help you.
    Re: BAPI to Park the Invoice Document
    Regards,
    Shamma

  • Update Parked Non PO invoice - FBV2 functionality via BAPI or FM not BDC

    Good day all,
    after searching many days, I have found many threads similar to this request but none have been properly answers.  My scenario: I need to change a header field (ZUONR) and account assignment related fields (KOSTL, AUFNR, etc) in the document items.
    I have tried many FM for this but can't seem to overcome the fact that parked, non-po invoices have no entry in the BSEG table.  I have progressed a long ways with the BAPI
    PP_CHANGE_DOCUMENT_FBV2_ENJ
    But I get an error message:
    No item information transferred into Accounting
    Message no. RW002
    Diagnosis
    The interface into Accounting requires:
    Header data
    Item data
    Currency data
    The item data is missing.
    System Response
    Processing of the data in the Accounting interface is not possible.
    Procedure
    This is a system error of the application which was called up.
    This message seems to derive from a missing set of field what should be coming from the FM
    AC_DOCUMENT_CREATE
    I can't seem to debug there the internal table T_ACCIT should be getting it's values
    Please help troubleshoot this.
    Cheers
    M

    SG- Thank you for the reply.
    I have been playing with BAPI_INCOMINGINVOICE_PARK and I'm not sure if it is doing exactly what we want, but it is something that I have considered in the past. I plan on looking into BAPI_ACC_INVOICE_RECEIPT_POST this morning, hopefully that will provide some more for us.
    If possible I'd like to avoid BDC sessions because this program could hypothetically interface with multiple SAP systems with different configurations.
    I will check into those FM's and thank you very much.

  • Errors occurred during call of function module BUPR_EMPLO_DELETE

    when distributing employee data from (HCM) to (CRM) there is an error that appears in relation with the settings for the Business Parner:
    "Errors occurred during call of function module BUPR_EMPLO_DELETE
    Message no. R11335
    Diagnosis
    The business partner BAPIs were called up incorrectly. The indicator IV_X_SAVE was given differing settings when the modules were called.
    Within a LUW, the indicator must be consistently set or not set.
    System Response
    The indicator IV_X_SAVE should be set or not set once off. Up to COMMIT WORK the content of the field may not be changed, as problems will otherwise occur with the internal memory, thus leading to runtime errors."
    This prevents CRM to be updated with the changes. Kindly help me on the same.

    Hi Sai,
    This is too late to reply this post, but to let everyone know about the issue I am posting here.
    Start new UI session and put breakpoint at BUPR_EMPLO_DELETE and check parameter IV_X_SAVE everytime, till you get the error message. The parameter IV_X_SAVE should be same/consistent (either ' ' or 'X') in whole Logical Unit of Work. It should not change in between.
    I faced the same kind of problem and found that standard was passing IV_X_SAVE = ' ' and in our custom code we were passing IV_X_SAVE = 'X'. I changed it to IV_X_SAVE = ' ' and my problem got resolved.
    You can try the same. Please post the alternate solution if you find it.
    Best Regards,
    Rahul Koshti

  • Error "Package in non-original system only modifiabl with Organizer Tools"

    Assign Customer Objcet PROG to Package "Z001"(created by myself),it pop-up error "Package in non-original system only modifiabl with Organizer Tools"
    how can  i deal with this error?
    could any warm-hearted fellow give me some tips ?
    tks a lot !

    Hi sophie,
    i think you transported this package from another system to a new system and you are trying to modify the package.
    just have a look at below link hop it will help ,otherwise let us know
    http://help.sap.com/saphelp_nw04/helpdata/en/57/38de9b4eb711d182bf0000e829fbfe/content.htm
    cheers
    shibu

  • Taxability of Vendor non-PO Invoices

    Hi All,
    We are using tcode FB01 and/or FB60 to post non-PO invoices. The invoice will accrue taxes ifthe expense account line item is entered first and then the offsetting vendor line is entered.  If the vendor line item is entered first and expense line item is entered second then the tax will not accrue for the invoice. The data entered for the document is same in both cases, the only difference is the order of which line item is posted first.
    Has anyone experienced this type of issue or has any idea what may be causing this. Should not the result be same irrespective which line is entered first as data for expense and vendor line items is exactly same in both cases. We are using an external SAP add-on for taxes. 

    Hi ,
    Please check in integration may be you have defined condition which says first line should be expense and only then tax will deduct . when you post  invoice on which tax is not deducting please take your ABAPer help and edbugg so that you can find out exact point and cause of error .
    many Thank

  • Travel Display Form: Error while determining the form function module

    Hi,
    In Travel Reqeust (ECC6/ESS) when i click the Display Form after raising the Travel Request it shows the error
    "Error while determining the form function module"
    Can anyone have idea on this?
    Regards,
    Boobalan

    Hi,
    This error was due to Not supported platforms of ADS (Adobe Document services)
    It was not supported on itanium64 bit processors.
    Please check where the ADS is supported in service.sap.com/pam
    You can use the ADS in the Non-Supported Server by linking it to Supported Platform Server using the SM59 link. This will make the ADS files to work.
    Please refer the ADS Config Doc for details.
    Hope you also solve this problem.
    Regards,
    Boobalan

Maybe you are looking for