Error in 'CX_SY_DYN_CALL_ILLEGAL_TYPE' problem in smartfrom printing

Dear Friends,
I developed a code for SD module for RAS GAS invoice. It it I m accessing it through VF02. on output there will be a smartform appered for invoice.
I tested the driver code and smartform individually and had no errors.
I attached the driver code and form through NACE for run time.
Now when I m executing it through VF02 , when I clicked on print preview it throws a error as show.
Plz help me to remove it. Error analysis and piece of code is attached.
Thanx and regards,
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_DYN_CALL_ILLEGAL_TYPE',
was neither
caught nor passed along using a RAISING clause, in the procedure "PROCESSING"
"(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The call to the function module "/1BCDWB/SF00000193" is incorrect:
In the function module interface, you can specify only
fields of a specific type and length under "ITVBRK".
Although the currently specified field
"ITVBRK" is the correct type, its length is incorrect.
Information on where terminated
The termination occurred in the ABAP program "ZV_RASGAS " in "PROCESSING".
The main program was "SAPMV60A ".
The termination occurred in line 633 of the source code of the (Include)
program "ZV_RASGAS "
of the source code of program "ZV_RASGAS " (when calling the editor 6330).
Processing was terminated because the exception "CX_SY_DYN_CALL_ILLEGAL_TYPE"
occurred in the
procedure "PROCESSING" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "ZV_RASGAS ". Its source code starts in line 58
of the (Include) program "ZV_RASGAS ".
Source code extract
006030                       no_function_module = 2
006040                       OTHERS             = 3.
006050       IF sy-subrc <> 0.
006060   *   error handling
006070         cf_retcode = sy-subrc.
006080         PERFORM protocol_update.
006090       ENDIF.
006100     ENDIF.
006110
006120     IF cf_retcode = 0.
006130       PERFORM check_repeat.
006140       IF ls_composer_param-tdcopies EQ 0.
006150         nast_anzal = 1.
006160       ELSE.
006170         nast_anzal = ls_composer_param-tdcopies.
006180       ENDIF.
006190       ls_composer_param-tdcopies = 1.
006200       DO nast_anzal TIMES.
006210   * In case of repetition only one time archiving
006220         IF sy-index > 1 AND nast-tdarmod = 3.
006230           nast_tdarmod = nast-tdarmod.
006240           nast-tdarmod = 1.
006250           ls_composer_param-tdarmod = 1.
006260         ENDIF.
006270         IF sy-index NE 1 AND repeat IS INITIAL.
006280           repeat = 'X'.
006290         ENDIF.
006300   * call smartform invoice
006310   append itvbrp.
006320
>   CALL FUNCTION lf_fm_name2
006340     EXPORTING
006350       RDT                        = rdt
006360       BILSDT                     = min
006370       BILEDT                     = max
006380       CUMMMSCM                   = cummmscm
006390       TPCUMMMBTU                 = tpcummmbtu
006400       TPCUMSCM                   = tpcumscm
006410       WS_IVBEL                   = WS_IVBEL
006420       WS_GVBEL                   = WS_GVBEL
006430       WS_BVBEL                   = WS_BVBEL
006440       WS_BILDT                   = WS_BILDT
006450       TPCUMMMBTUX                = TPCUMMMBTUX
006460       GINVNO                     = inv
006470       BILDOC                     = BILDOC
006480       ZKBETR                     = ZKBETR
006490       zlng                       = zlng
006500       zrc                        = zrc
006510       zkb                        = zkb
006520   *    VOLUM                      = VOLUM
thanx and regards,
sitendra

Hi Sitendra,
This exception normally occurs when there is a type mismatch.
Kindly check the length of all fields in the structure/table ITVBRK both in your print program and smartforms. There is a mismatch in the field length of 1 or more of the fields.
Reward points if helpful.
Regards,
Senthil G.

Similar Messages

Photosmart 7520 error. there is a problem with the printer. turn printer off then on.

I have a photosmart 7520 experiencing the following issues.
Problem #1: Randomly all the lights start to blink off and on and the display reads the following :
Error . There is a problem with the printer. Turn printer off then on.
I cannot find any one action that triggers this to happen.
Problem #2: When the printer is turned on and idle, also at RANDOM times, the printer will "Ding" followed by the wireless light blinking. Then what sounds like the cartridges being cleaned, then a sound like the feeder spinning or the print head running full track from side to side, then ending with a "Ding" and then returning to normal.
When this occurs, the wireless connection is disconnected then reconnected. Also this Disables the "Scan to computer" function to all the computers on the network and requires manually re-enabling all .
From what I can tell the printer is restarting itself.
It is plugged directly into the wall outlet, no surge protector.
Tech support has already run me through the clean the print head steps, escalated me up the chain, and ultimately replaced the printer with a brand new one.
THE NEW PRINTER IS DOING ALL THE SAME THINGS AS THE PREVIOUS ONE.
This printer is connected wirelessly to a Netgear N900 router. My computers all running Windows 7, all are on the same network and workgroup and all are running Mcafee Total Protection.
If anyone is or has experienced the same or similar problems, I could sure use some help.
This question was solved.
View Solution.

How did you fix this?
I replaced an HP printer recently for a new Photosmart 7520 after a complete ink container emptied into the printer.
The old printer sometimes had difficulties switching it on and the new printer has the same problem.
Also the wireless connection regulary drops and can only be reenabled by switching of the printer and switching it back on, only this sometimes takes more than ten minutes before a simple push on the power button is translated in a power on of the printer.
Since the previous printer also suffered from these "power" issues, I think the problems are power related, but I have to check this first before I can say anything more about this.

Error message "there is a problem with the printer turn the printer off than on again"

I have a new HP 7525 HP photosmart printer, went to use it to find all lights flashing with an error message on screen " There is a problem with the printer. turn the printer off than on again" this does not resolve the problem.. unable to clear this error message! Unable to use this printer!!!!
This question was solved.
View Solution.

Hi sandrafranks,
Thank you for your reply!
I believe this is a hardware related issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

ENVY 7640 error "There is a problem with this printer"

Hi guys. I got this printer 4 months ago and it has been working marvelous. But this weekend when I turned it on the error "There is a problem with this printer" appeared, just after it connected to my wifi network.I made several tests and the error comes only if the network is connected to the internet.When it is not connected to the internet the printer works fine (prints, scans, all via wifi).I have a MAC and an AirPort Time Capsule.Is there any set up that solves the problem?

Hi , Welcome to the HP Forums! I see that you are getting the error message, "There is a problem with this printer," with your HP Envy 7640 on Mac OS X 10.10. I am happy to help! Is this error message showing on the printer's display screen, or on the computer screen? If the error is on the computer screen, try resetting the print system. If the error is on the printer's display screen, please try a hard reset, by going to this post, How to perform a Hard Reset, by . It is important that the printer's power cable is plugged directly into the wall outlet, and not a surge protector. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well. I would also double-check that your printer's firmware is up-to-date. Getting the Latest Firmware and Product Updates. Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart

I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart. Printer is Hp Photosmart c5180

This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problem with HP printer hplip is not starting

My daemons line
DAEMONS=(syslog-ng portmap dbus hal network netfs hplip cups clamav alsa acpid !crond kdm)
I have installed it using pacman. If I run pacman -S hplip I get a message saying it is already there.

Okay, after a search I come up with the preferred printer installation method using the hp-setup command line tool. As this is supposed to be the 'HP' way to setup the printer and use hp-toolbox I decided to go this route. Naturally, the output is not promising:
# hp-setup
HP Linux Imaging and Printing System (ver. 0.9.8)
Printer/Fax Setup Utility ver. 0.7
Copyright (c) 2003-5 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
[ERROR]: No devices found.
[ERROR]: Error occured during interactive mode. Exiting.
Now, why the heck would it not find the device when it is already set up via CUPS and working properly in the desktop environment? The latest hplip version is 0.9.10, but I somehow doubt using the 0.9.8 would cause this type of problem as the printer I use is not a recent piece of machinery.

Crystal Report error - "the group section cannot be printed..."

Hello to everyone.
I have a CR report based on a database view.
Everything is ok when i run the report in the CR designer but choosing the option to preview the report or run it from the SAP Business One (8.81 PL 08) i get an error:
"the group section cannot be printed because its condition field is nonexistent or invalid. Format the section to choose another condition field. Error in file "the Report name".rpt. Invalid group condition".
i must say that this happens in all my reports where i have group data. Also i must say that all those reports were ok some days before...
Is there a way for me to know what field is it refering to?
I have verified the DB and it is pointing correctly and the also the View returns data.
Thanks in advance

Hello Gordon,
thanks for your response. the reports were working fine until 8.81 PL05
We have upgraded the customer from PL05 - > PL08 a week ago.
Do you think that maybe this is the problem?
Thanks in advance

I keep getting an error message when I try to print. I have tried ctrl/p, and the print command in my email both give me the same error message

It has been for a month or 2 that I have not been able to print anything in my Firefox browser (It used to work just fine). I have no problem at all printing in Chrome ( I never use Internet Explorer ). Is it possible that my new printer is the problem? I had an HP now I have an Epson. That is the only change I have made that I am aware of.
A few weeks ago I had to print out an email, but the only way I could get it printed was to take a screen shot and paste it in a program that would print it.
The error message I get is: Printer Error An error occurred while printing.

See this - https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox
Specifically see this paragraph - [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?esab=a&s=reset+printer&r=5&as=s#w_reset-all-firefox-printer-settings Reset all Firefox printer settings]

Error message in Adobe Pdf in printer device panel when trying to create a pdf document. I have CS3

Error message in Adobe Pdf in printer device panel when trying to create a pdf document. I have CS3 Web Premium with Acrobat Professional 8. I use it fine on my old computer with Windows XP. I recently got a new laptop with Windows 7. I installed all my Adobe programs, and I think they are working. When I look at Adobe PDF in the device section of the Control Panel it looks okay. But when I try to print a Word, Photoshop, or HTML page in PDF, nothing happens. I have tried printing both as File>print and using the PDF tab on the top menu bar. I look at the device in the control panel and it has the yellow error warning symbol and suggests trying to troubleshoot. I look at the document list and it says status "error". When I try troubleshooting Windows suggests doing some Home Sharing and also suggests canceling the document I'm trying to print. I tried re-installing just Acrobat 8 from CS3 (and have to use Photoshop CS4 disk for shared documents I guess). I ran into a can't locate adobepdf_dll file, so did a web search on this issue and found a suggestion that I find and use the adobepdf_dll_64 file and may have to (I did have to) remove the "_64" for it to work. I think I successfully reinstalled using that dll file- no errors came up anyway. But still when I try printing/converting a photoshop, webpage, or word document into pdf, the pdf device in control panel still gives the error status on the document and gives the same troubleshooting advice. Help?

I just compared the properties between the two computers. On the old computer it has the port as "My Documents/*.pdf". On my new computer it lists the port as "LPT1". I tried changing the port to "Print as File", but when I try printing a photoshop picture as pdf, I get a "Access Denied". I then tried to create a new port on the device control panel. I tried to create a local port "My Documents/*.pdf" port but was denied. I ten tried to create a new port type and control panel asked for an INF file. I wonder if this is where my problem lies. Thoughts?

I am trying to print a fillable form. It will not print and I get two error messages "document could not be printed" and "there were no pages selected to print." Th latter is not true. Won't print all, the page I am on, nor any series of pages inserted

I am trying to print a fillable form - - an application for a Chinese visa. It will not print and I get two error messages: "document could not be printed" and "there were no pages selected to print." The latter is not true. Won't print at all, the page I am on, nor any series of pages inserted.
Am using a MAC desktop and a Cannon PIXMA MX922 printer.
I need to print this form now that it is filled out? What can I do?

Hello PW, I am having this problem and all suggestions haven't worked yet. Where is the Preferences|Documents you are referring to? I am on a PC and using Windows.
EDIT: I found it and did, but still not working.

HP Device Toolbox software Error Unable to connect to the printer

Hi guys,
I'm currently in bit of a nightmare with my HP Laserjet 100 color MFP M175nw.
Basically I have upgraded to a new wireless router and since doing this my HP Laser Jet refuses to work / connect to the wireless network.
I have literally tried just about evey thing I can to get it to work, thoroughly through the manual, uninstalled and reinstalled the software about 12 times, tried firewalls on and off, tried security on the router on and off, tried WPS mode, tried manually entering in the IP address into the printer all without luck. You can see my dedicated thread here
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/HP-LaserJet-Pro-100-color-MFP-M175nw-un...
So currently I have the printer connect to the computer via USB and it works, so I decided to try using the HP Device toolbox software to see if it would give me any more options to try and when I run this software I get
Error: Unable to connect to the printer, make sure your printer is properly connected and powered on and then try to open the HP device toolbox again. Arg!!!
My new router is a Billion 7800DXL, my old router which worked in wireless mode was also a Billion 7300g.
Any help would be great really stuck here

Hello tf22raptor.
I see that you're now experiencing an issue getting the Device Tool box to run. I will try and assist with this.
After reviewing this post and the other thread, I have a few things you can try.
1) Run MS Fix it utility to uninstall the software: Fix problems that programs cannot be installed or uninstalled.
(This is to make sure the software is completely removed and conflicts in the registry get resolved)
2)Msconfig: press windows key and R on the keyboard> in run box type "msconfig"> on window select "services tab"> check box next to "hide all MS services> press disable all> go to "startup" tab> press disable all> press apply and ok at the bottom> this should prompt a PC restart.
Please restart.
3) Re-install via USB
4) Try running the device toolbox now
5)If still having issues installing wireless, you may have to contact the router manufacture.
I hope this helps you out. Thanks for posting on the HP Forums.
I worked on behalf of HP.

Problem with pdf-printing in Adobe Acrobat Pro

Hi,
I have Adobe Acrobat Pro 9.4.3.
PDF-printing has always worked great but suddenly there is some kind of problem.
After printing a excel-document from "Print to pdf" built-in function in MacOS OR Adobes Printer I have corruptet pdf-files when showing them in Adobe Reader/Acrobat, but the MacOS Preview-software shows them correct.
So, there cannot be any problem with the printing, but the local preview on my computer using Reader or Acrobat. I dont even use the Myriad font in the document, I use Verdana.

You say you're using Verdana but you're not. The error message clearly shows you're using MyriadPro Bold.
You probably recently installed the Mac OS X 10.6.7 update which has a bug with OpenType PostScript fonts like MyriadPro Bold. Either use Verdana or another TrueType or PostScript font, or revert to Mac OS X 10.6.6.
Read about the problem here: http://www.tidbits.com/article/12078

HP Officejet Pro 8600+ "There is a problem with the printer or ink system..."

I have an HP Officejet Pro 8600+ that is coming up with an error message. This just happened out of the blue yesterday. The printer is just over a year old.
It says:
"There is a problem with the printer or ink system. Print head missing not detected incorectly installed or incompatable"
I have removed and reinstalled ink cartridges, the head, unplugged, cleaned, etc. etc.
HP Officejet Pro 8600+
Product Number CM750A
Serial Number {Content Removed}
Not under warranty
Please advise.
This question was solved.
View Solution.

Sorry that you are experiencing this problem. Here is a link that may assist you with the ink system.
http://goo.gl/BXDFf
It seems to be a bad print head, or it needs manually cleaned with lint free cloth and water. If these steps do not resolve the issue, contact HP Support (1800-474-6836).
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

Problem with the printer or ink system code 0x610000f6 HP model 6700 premium

Hello, I have recieved an alert for the second time in a week stating that there is a problem with the printer or ink system. The alert prompts me to turn off, then on the printer. If problem persists, contact HP. 0x610000f6. What could be the cause for this type of alert to appear?

'0x610000f6' error message appears if there is a 'Paper Jam' or a 'Carriage Jam' in the printer.
You can experience following issues:
The product won't print.
The print job stops unexpectedly.
To resolve Error code '0x610000f6' follow methods provided in below mentioned link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01620497

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

Error in 'CX_SY_DYN_CALL_ILLEGAL_TYPE' problem in smartfrom printing

Similar Messages

Maybe you are looking for