Error in DW when using Dynamic Data

Hello all,
I'm not sure if my problem is common or rare, so I'll give you two versions.
Short Version:
Everytime I load a page with Dynamic date (I'm using PHP MySQL), the problem tells me an error was encountered and it boots me after I select to send or not to send the Error message.
Long Version:
I have a database in MySQL set up to use. I have 23 or 24 fields in the main DB, and 6 other DBs involved. Currently I'm only using Dreamweaver for Data Entry into my inventory. I created a Add Product page to update the MySQL DB, and I succesfully entered about 80 products. I then decided I wanted a new category, added it to MySQL, and proceeded again. This time I encountered an error.... something to the tune of my SQL Script being bad at the " on line 1. I'm not very familar with MySQL, and after a couple of hours trying to figure this out, I went to bed. Next morning, I try to recreate a new database, and a new DW site, to start from scratch (since everything was working fine before the errors).
Now my errors are listed in the Short Version. Everytime I open a page with dynamic data, the program ecounters an error and I get booted.
Anyone experience anything similar, or anyone know any solutions?
Thanks much for any input.
-Derek

Hey Gunter,
Thanks much, that did work.
The other error I spoke of was fixed with the new database, so apparently the two errors I spoke of weren't related.
You seem to be a good help to this forum, thank you for that.... fixing my problem relieved me from much stress.
Cheers,
Derek Miller
Dreamweaver Enthusiast

Similar Messages

Error rendering Chart when using decimal data

I am using XML Publisher Desktop 5.6.2 on MSWin with Regional and Language Options = Slovenian.
I have problem with rendering Chart when source xml data file contains decimal data points
(eg: SALARY = 6938.55). For example, if I want to show sum or average of SALARY
on the chart I get the error message, something like:
XML Parsing Error: no element found
Location: file:///C:/PROGRA~1/Oracle/XMLPUB~1/TEMPLA~1/tmp/xdoimg_7K9huZ0hRQ47453.svg
Line Number 1, Column 1:
If I use only integer values everything is ok. It looks like there is kind of mis-interpretaion of
decimal character (dot vs comma - Slovene language uses comma as decimal char and
dot as separator char). I tried this with both Preview Options Locale:
English/United States [en-us] and Slovenian/Slovenia [sl-si] with the same result.
My Java Home is C:\Program Files\Java\jre1.5.0_06\.
Any idea how to fix this ?

Hey Gunter,
Thanks much, that did work.
The other error I spoke of was fixed with the new database, so apparently the two errors I spoke of weren't related.
You seem to be a good help to this forum, thank you for that.... fixing my problem relieved me from much stress.
Cheers,
Derek Miller
Dreamweaver Enthusiast

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

Error ORA-06502 When using function REPLACE in PL/SQL

Hi,
I have a PL/SQL procedure which gives error 'Error ORA-06502 When using function REPLACE in PL/SQL' when the string value is quite long (I noticed this with a string 9K in length)
variable var_a is of type CLOB
and the assignment statement where it gives the error is
var_a := REPLACE(var_a, '^', ''',''');
Can anyone please help!
Thanks

Even then that shouldn't do so:
SQL> select overload, position, argument_name, data_type, in_out
2 from all_arguments
3 where package_name = 'STANDARD'
4 and object_name = 'LPAD'
5 order by 1,2
6 /
OVERLOAD   POSITION ARGUMENT_NAME                  DATA_TYPE                      IN_OUT
1                 0                                VARCHAR2                       OUT
1                 1 STR1                           VARCHAR2                       IN
1                 2 LEN                            BINARY_INTEGER                 IN
1                 3 PAD                            VARCHAR2                       IN
2                 0                                VARCHAR2                       OUT
2                 1 STR1                           VARCHAR2                       IN
2                 2 LEN                            BINARY_INTEGER                 IN
3                 0                                CLOB                           OUT
3                 1 STR1                           CLOB                           IN
3                 2 LEN                            NUMBER                         IN
3                 3 PAD                            CLOB                           IN
4                 0                                CLOB                           OUT
4                 1 STR1                           CLOB                           IN
4                 2 LEN                            NUMBER                         INI wonder what happened?

Prompting for password and username only when using dynamic parameters

Post Author: Co3023
CA Forum: Crystal Reports
How do I stop CR XI prompting for password and username only when using dynamic parameters. When no dynamic parameters are used CR XI isn't prompting for the DB user name and password. The report is run from an application which passes the user name and password. I am using Oracle and the problem is both with the native oracle driver and the ODBC RDO driver.

Post Author: jehanzeb
CA Forum: Crystal Reports
I didnt ask you to change it to static I said I took the parameters totally out of the report. Saved it. Then re-enter the dynamic parameters into the report and it worked for me. That might have worked for you, not sure why you changed it to static.
Ok I have just created a quick report using dynamic parameters, it didnt ask me for the username password.
Can you create a sample report - just to test the db? and see if it works? add only 1 or 2 fields in the report, create parameters (dynamic) and see if it works
why don't you embed the username and password in your application, it won't ask for username password then.

Using Dynamic Data in "Send E-Mail To Recipients From Recordset"

Hi,
How can I use Dynamic Data embedded in recordset field ?

I try another way to do it, using a html link
> function Trigger_EmailRecordset_E6(&$tNG) {
$rsemailObj = new tNG_EmailRecordset($tNG);
$rsemailObj->setRecordset("rsTasks");
$rsemailObj->setFrom("{KT_defaultSender}");
$rsemailObj->setTo("email_to");
$rsemailObj->setSubject("{rsTasks.lib_task}");
//WriteContent method
$rsemailObj->setContent("{rsTasks.email_text}\n\n\n{rsTasks.url_document}
<a href=\"http://xxx.xxx.xxx.xxx/yyyyyyyy/{rsTasks.url_document}\">Clic here</a>");
$rsemailObj->setEncoding("UTF-8");
$rsemailObj->setFormat("HTML/Text");
$rsemailObj->setImportance("High");
return $rsemailObj->Execute();
I wonder if I could use Dynamic Data _INSIDE_ {rsTasks.email_text} field ?
Thanks. JM.

How to skip authorisation for infotype when using dynamic selection ?

Hi folks,
I have a problem here.
When im using dynamic selection screen, i cannot skip authorisation for subtypes of an infotype. Eg. if my record for 0185 have records that do not have authorisation for the subtypes. Dynamic selection will filter away this record and will not get me into the Get Peras as id i use to run has authorisation configured. IT will skip out of Get Peras.
However, if im not using dynamic selection screen, i will use the normal pnpce fields, i will be able to get the record, as i do my authorisation check using function module in the get peras, and i did not declare 0185 in the infotypes.
May i know if there is any solution to this problem as dynamic selection screen is a standard...
Thanks,
lihui

hi,
however i cannot skip authorisation for the whole pernr as i need the authorisations for the processing reports.
Currently the case is like this..
i have a authorisations for infotype 0185. i have 2 subtypes records such as ZA and ZB. the user does not have authorisation to read ZB but has authorisation to read ZA.
However, when use dynamic selection, it will skip out the pernr.
If the pernr 0185 records has only ZA subtype but no ZB subtype, it will not skip this pernr when using dynamic selection.
Anymore idea how to overcome this?

Error 7 occurred when generating the data transfer program

Hello All ,
In Master Data Load Process Chain , we get error like
1. System Response
Caller 09 contains an error message.
Diagnosis
Error 7 occurred when generating the data transfer program for the requested InfoSource.
System Response
The data transfer is terminated.
Procedure
Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
Note : We faced this issue for two days now . Just repeating the load make it success .
If any one faced and fixed this issue . Please let me know .
Thanks in advance .

Hi,
. Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
This will actiavate the given datasource.
2. Replicate the datasource in RSA1.
3. Try to schedule the infopackage for the datasource which you have activated now.
4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
Also make sure that there will be enough Back Ground Processor available....
Reduce the parallel process
Thanks
BVR

Error 1074396120 appears when using IMQA copy

error 1074396120 appears when using IMQA copy,when i used in vision its working but when i tried to execute in labview its showing error image not found and not valid image. pls help me regarding this .

Have a look
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

Hi there , Why Do I Receive Error Code -1073807253 When Using VISA

Error Code -1073807253

Hi ahmed,
you can attach picture directly in the forum...
If you would use an error indicator you could read an explanation of the error. It's a "framing error", happening sometimes when using serial connections...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Get ORA-01031: insufficient privileges error, but only when using dbstart.

I am getting ORA-01031: insufficient privileges error, but only when using dbstart. the listener starts but not the database. How come I can start it from SQL prompt but not from dbstart scripts as the oracle user?
[oracle@mallard bin]$ ./dbstart
Processing Database instance "gf44": log file /prod/oracle/10/startup.log
[oracle@mallard bin]$
Log file:
Wed Aug 20 10:15:02 CDT 2008
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Aug 20 10:15:02 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> ERROR:
ORA-01031: insufficient privileges
SQL> ORA-01031: insufficient privileges
SQL>
/prod/oracle/10/bin/dbstart: Database instance "gf44" warm started.
>
oratab file:
gf44:/prod/oracle/10:Y
dbstart file section:
# See if it is a V6 or V7 database
VERSION=undef
if [ -f $ORACLE_HOME/bin/sqldba ] ; then
SQLDBA=svrmgrl
VERSION=`$ORACLE_HOME/bin/sqldba command=exit | awk '
/SQL\*DBA: (Release|Version)/ {split($3, V, ".") ;
print V[1]}'`
case $VERSION in
"6") ;;
*) VERSION="internal" ;;
esac
else
if [ -f $ORACLE_HOME/bin/svrmgrl ] ; then
SQLDBA=svrmgrl
VERSION="internal"
else
SQLDBA="sqlplus /nolog"
fi
fi
Permissions of file:
[oracle@mallard bin]$ ls -la dbstart
-rwxrwxr-x 1 oracle oinstall 10407 Aug 19 12:27 dbstart
[oracle@mallard bin]$
User permissions:
[root@mallard 10]# id oracle
uid=503(oracle) gid=503(oinstall) groups=503(oinstall),504(dba)
[root@mallard 10]#
I can start the listener manually using "./lsnrctl start" and start the database manually from sql prompt using "SQL>startup" (as sysdba) with no problems. this only happens when using dbstart file. I am logged in as oracle user and all environment variables are set
Thank you for any help you could provide.

I have the same problem, but i don't want insert this string
Connect sys/{password} as sysdbaI have deployed an Oracle 10g with os SunOS
$ uname -a
SunOS DB02 5.10 Generic_141444-09 sun4v sparc SUNW,Sun-Blade-T6320
I can connect with sys/password, but I can't login with
$ sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Jan 7 15:19:50 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect / as sysdba
ERROR:
ORA-01031: insufficient privilegesthe the startup and dbshut don't work.
Someone maybe help me?
Thanks,
Regards.
Lain

What is the best way to display errors to users when using JSPs?

 Hello,
 Could someone suggest me the best way to display errors to users when using JSPs?
 Many thanks in advance.
 Rino


 Thanks for the code snippet!
 Rino
 "Deepak Vohra" <[email protected]> wrote:
 >
 >
 >The 'errorPage' attribute of the 'page' directive forwards uncaught run-time
 >exceptions
 >to an error processing page. For example:
 >
 ><%@ page errorPage="error.jsp" %>
 >
 >redirects the browser to the JSP page error.jsp if an uncaught exception
 >is encountered.
 >
 >
 >Within error.jsp, indicate that it is an error-processing page, via the
 >directive:
 >
 >
 >
 ><%@ page isErrorPage="true" %>
 >
 >The Throwable object describing the exception may be accessed within
 >the error
 >page via the 'exception' implicit object.
 >
 >
 ><% if (exception != null) { %>
 > An exception was thrown: <%= exception %>
 >
 > With the following stack trace:
 ><pre>
 >
 ><%
 > ByteArrayOutputStream ostr = new ByteArrayOutputStream();
 > exception.printStackTrace(new PrintStream(ostr));
 > out.print(ostr);
 >%>
 ></pre>
 >
 >
 >
 >"Rino Srivastava" <[email protected]> wrote:
 >>
 >>Hello,
 >>
 >>Could someone suggest me the best way to display errors to users when
 >>using JSPs?
 >>
 >>Many thanks in advance.
 >>
 >>Rino
 >

List of values failure error when trying to use dynamic data values

Hi there,
I have a user who is experiencing problems when trying to use dynamic values in a report. Whenever he tries to insert dynamic parameters he gets the following error message:
Prompting failed with the following message: 'List of Values failure: Failed to get values. [Cause of error: Access is denied.] Error Source: prompt.dll Error Code: 0x8004380D
He even opened the sample report - prompting.rpt - that is included with CR and gets the same error.
We are using Crystal Reports XI Release 2 ver. 11.5.11.1470.
Any help would be appreciated.

Please excuse my ignorance of the product. I've had this problem dropped in my lap and I know practically nothing about Crystal Reports. In doing some digging it appears to me as if the BusinessObjects Enterprise software may not be installed properly, if at all. In the programs menu under the BusinessObjects XI Release 2 folder I see a BusinessObjects Enterprise folder, but the only icon listed in that folder is Software Inventory Tool.
Is the BusinessObjects Enterprise software a separate install from Crystal Reports or is it bundled together? I talked with the tech that did the install and he said that all he had was the Crystal Reports install media.

Excel Error When Using Microsoft Data Link

I   have   a   user   who   is   running   the   following:
Windows   7   w/64   bit   OS
MS   Office   2010
SAS   9.3   Software
They   created   a   database   in   Excel   and   have   integrated   the   information   with   SAS   9.3   database.
For   some   reason,   now   when   they   try   to   'Refresh'   data   in   the   Excel   spreadsheet,   Excel
freezes   and   then   crashes.
I   believe   it's   because   the   'Microsoft   Data   Link'   is   failing,   during   set-up.    Below   are
the   error   messages   they   get,   when   trying   to   set-up   the   'Microsoft   Data   Link'   with   the
SAS   9.3   software:
ERROR   MESSAGES:
1.   Microsoft   Data   Link   Error:   Test   connection   failed   because   of   an   error   in   setting   the
window   handle   property.    Multipl-step   OLE   DB   operation   generated   errors.    Check   each   OLE   DB
status   value,   if   available.    No   work   was   done.    Continue   with   test   connection?    Yes   or
No.
2.   Microsoft   Data   Link:   Test   connection   succeeded   but   some   settings   were   not   accepted   by
the   provider.
I   don't   know   where   to   begin   troubleshooting   this   issue,   as   I   don't   use   the   SAS
9.3   software,   nor   have   I   ever   attempted   to   use   the   'Microsoft   Data   Link'   option   in
Excel.
TROUBLESHOOTING   I'VE   TRIED:
Repair   of   MS   Office   2010
Uninstall/Reinstall   Excel   2010
Any   assistance   would   be   appreciated.

Hi,
In regarding of the issue, please provide us more information to assist you better.
Did this issue occur with other database program? Such as Access, SQL sever or other?
If the Excel still crashes, I recommend we collect the Event log and App crash dump file to do further troubleshooting. You can try to analyze dump by
yourself if you would like to：
How to analyze app crash dump file:
http://blogs.technet.com/b/askperf/archive/2007/05/29/basic-debugging-of-an-application-crash.aspx
Also you can send them to us via Email ([email protected])
If the issue occur with the SAS 9.3 software, I recommend you connect it's provider or support to get more help.
Did you
use 'Microsoft Data Link' like this?
If it was, we may need to debug the connecting string, you can post the question to Visual Studio forum.
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Error in DW when using Dynamic Data

Similar Messages

Maybe you are looking for