Error in entering header level conditional value - toomany line items to PO
Hi experts
I have an issue while processing a PO. While entering condition values like Freight, Customs duty etc in header level where the order contains more than 1000 line items, i am getting an error " too many line items, msg no.899". Can somebody, guide on this how this can be resolved.
rgds
Raghu
HI Raghu,
The only possible way is to create two diffrent PO's.
As you have maintain various conditions, this will lead to updation of many FI documents at the time of GRN.
This is SAP Limitation.
Regards,
Amit
njoy SAP..
njou Life....
Similar Messages
-
How to split a condition value across line items with varying percentages?
Hello, can anyone suggest how this can be resolved. This is the scenario.
My client wants to be able to determine pricing for a sales document with a wide range of conditions. One particular condition contributes to the total price of each sales item by determining a percentage of the total amount. The percentage used isn't a fixed percentage but it is determined as follows: Lets say I have 3 sales items in the document with prices 200, 300 and 500 respectively. The total amount for the condition (which is known) then has to be shared amongst these 3 items according to the price of each item. How can this be achieved? Any ideas?You will have to define a Header Condition which will apply to all the Items.
Then, You will have to develop a Z- Requirement in T-Code - VOFM with help your ABAPer.
Then assign this Routine in Alternative formula for condition base value column in your Pricing Procedure.
The ABAP code in the Requirement will read the Basic Price of all the Items & then proportionately divide the value of said Condition line-item wise.
Hope this clarifies.
Thanks,
Jignesh Mehta -
How to fetch the condition value per line item in PO o/p
Dear Experts ,
I need to fetch the value of the all valid condition types in the PO item , for its o/p .
For this i should know
1.what all are the condition types involved in the item .
2.what is the condition rate
3. what is the condition value .
Pleas etell me how do i fetch this data ??
Thanks in advance
Regards
AnisHi Anis,
At first collect the doc.condition-KNUMV from EKKO table.
Later enter the above doc.condition no in KONV and KONP to get the details.
Regards
Ramesh Ch -
MIGO: Po header level condition for excise are 100 times less
Hello,
While MIGO against purchase order
Item level BED condition value is showing as 160 and header level condition value is showing as 1.60
What could be the root cause?
Thanks & RegardsI also come across similar issue in various threads..Let us hope for solution.
-
Header Freight Condition Value to be Spread at Item Level
Dear All,
There is an issue i am facing.
We have a freight condition (header level) in a Stock Transport Order
There are say 6 line items in the STO. The functional requirement is that the Header Freight Condition Value has to be inventorised on the line items in ratio of their value. Also the header freight amount should get spread only on specific line items ( say of a particular material type )
Please help me with this issue.
Regards,
Adams PDear RamShiva,
I think below forum document will resolve your issue.
http://scn.sap.com/docs/DOC-43356
Regards,
Haresh Panara -
Billing header pricing condition value
Hi,
I have requirment to display billing header pricing condition value. I have check using first go to Vbrk then find Knumv field,go to KONV and find all condition record value.
But in KONV there are only Items condition record SO how to find header. please replyHi ,
Instead of KONV, get the header condition value from KONH
regards,
santosh -
Require ability to enter a zero price on service line items
We have a need to create a service purchase order (item category 'D') with one line item using account assignment 'P'. We're creating as a 'limit' Purchase order and intend to create more than one service entry sheet. For example - the total expected services on the PO can be $20,000, and we will post service entry sheets weekly until the $20,000 is depleted.
Each service entry sheet will have multiple lines... some lines will include a price, and a some will need to have a zero price since the particular service was free and we'd like to acknowledge it as such. When entering a zero price on the line item on the service entry sheet, error message SE316 appears and we are forced to enter a price. When attempting to modify the line type to 'informatory' the 'informatory' radio button is grayed out and we do not have the option to change.
Please let me know if the scenario above is possible, and if so, please provide recommendation on how to accomplish.
Thank you
Marita HernandezHI,
you can not create free service PO in sap
for more check following link
[http://forums.sdn.sap.com/thread.jspa?threadID=1405217]
Regards
Kailas Ugale -
How could i enter 100 materials in the single line item in the repair order
Hello SD Guru's
The below requirement is related repair process.Can you please suggest how i can go head.
I have a one requirement related to repair process in SAP SD. As of now the the repair order creating for only one material in the single line item. But the requirment is if they returned morethan 100 material from same customer, how to process that in systme prospective and standard SAP.
The standard SAP working based on single material for each line item so that the repair indicatior is triggered for that single material only. So how cound i enter multiple materials in the single line item and how could i create 100 materilals in the sigle line item and how could the repair indicatior triggered for that line item which is having 100 materials
Thanks in advnce
Thanks
KVHello Chakrapani,
Thankyou for your quick responce.
How it could be possible if it is possible in SAP.
Can you please suggest how can we achive in this scenario.
Thanks & Regards,
KV -
Error: (GLT2 201) Balancing field "Profit Center " in line item 001 not fi
Hi All,
While trying to upload a MT940 bank statement thru FF_5 am facing this error " Error: (GLT2 201) Balancing field "Profit Center " in line item 001 not filled".
Can any one let me know how to overcome this error.
Thanks and Regards
SrihariBollaHi
Document Splitting is active in your Company Code.
Hence while doing posting it is mandatory to give Profit Center.
If you dont enter profit center during postings it will throw errors like this Balancing field "Profit Center " in line item 001 not filled.
Go to Img -->FinancialAccounting(new) -->General Ledger Accounting(new) -->Business Transactions -->Document Splitting -->Define Document splitting characteristics in General Ledger Accounting
Deselect the Mandatory Field CheckBox for Profit Center and save.
Now you will be able to Upload.
Regards
Venkat -
Can we see costing value for line item batch in Batch Information Cokcpit r
Can we see costing value for line item batch in Batch Information Cokcpit report - BMBC?
Business like to see standard cost/ item and extended cost which should be qty in inventory * standard cost.
Help appreciated.
Edited by: Tom_Eric on Jan 13, 2012 2:33 AMHI.
YES it is passible.
If the GL is activated line item display check box is active then we can able to see the data as per line items.
T<Code. Fbl5n
Thanks.
Vasu
Edited by: Vasu Enaguthi on Apr 7, 2010 8:46 AM -
Getting header data (condition values) for shipment
For the shipment VI03, the user wants the header Condition values(KWERT) corresponding to condition values(KSCHL).
Some of the condition type having values in item level but these condition types are not maintained in header level, so they want for these condition types values should be Zero.
As I am taking condition values for PRICING function module, it will display at sub-item level values depending on condition values.
Please let me know is there any functiona module or table exist where header data is directly mainatined(Condition values & Condition type).
Thanks & Best Regards,
MaheshFirst find the related salesorder using:
VBFA
VBAK-VBELN = VBFA-VBELV
LIKP-VBELN = VBFA-VBELN
VBFA-VBTYP_N = 'J'.
or
LIPS
VBAK-VBELN = LIPS-VGBEL
After that, with the order, get condition number in VBAK and then search KONV.
VBAK-KNUMV -> KONV-KNUMV.
Regards.
Valter Oliveira. -
How do i pass the error message at header level in CRMD_order
Hi all,
i got one requirement like when i create/change the sevice order (CRMD_ORDER)
if net_value is more than 1000 i have to set the message 'E' like 'order is blocked'
else 'approved' at header level before going to save the order.
please help me out it is high priority and as i am new to CRM.
thanks in advance.
Thank you,
Madhu.Anil
You have to look for a BADI to add the Error Message.
Also use the FM CRM_MESSAGES_DISPLAY to display the message !
Thanks
<b>Allot points if this helps!</b> -
Wht are functionality in salesdocument header level ( condition type)
hi friends
kindly send functionality in sales document header level , [email protected]
regards
shivajiThe functionality of sales document is as follows
Transfer of requirements and availabiltiy check
revenue account determination
text determination
pricing functions -
Header level to be copied to item level
hi,
i would like to make pricing condition at header level then the base amount should be equaly devided amound the line items.
pls advice me with the settings.
regards
sreekanthhai srikant this is srinivasNaidu
first, the Basic Price should not be Header condition
ex: in one sales order two line items are there
(a) car
(b) bike
in this case how u want to charge the same price for both
ok if u want according to your business requirement
pl follow the configuration settings of HeaderConditions ex
HA00, HB00,(but don't foreget that these are discounts) ok -
Change in partner at header level not getting copied to item level
Hello,
I would really appreciate any help from the forum on the below query.
How is it possible that a change in the Employee Responsible(Standard Partner Function) at the header level is not triggering a change in the item level?
Thanks,
SahilHi Sahil,
Please look into below note.
It may hint you something.
1008458
Rgds
Hari
Maybe you are looking for
-
HELP! How do I get wireless internet on both my Ipad and Desktop? Have Linksys Router WRVS4400N. Only 1 device will work at 1 time. Something about a Learn MAC address? What should I do? Thanks! Tiggergirl
-
How do I import my addresses from Outlook-saved on USB drive?
just got an imac, and LOVE it, but am a bit lost! I saved my address book from my old computer ( outlook) onto a USB jumpdrive thinking it would make it super easy to import them into mail, but can't make it do it now...it tells me they're not in the
-
How do I fix PowerPoint 2004 crashes?
Dear all, here is my problem: Out of the blue, my power point (2004 w/ updates on MacOS 10.3.9) opens fine but keeps crashing when I try to open any existing ppt file (that were just fine previously and open on any other pc incl. windows machines) or
-
Just up-graded from FCP6 to FCP7 and upgared operating system from 10:4 to 10:6 and uploaded latest version. I've been working on an HD project in FCP6 and loaded clips with NO problems. However, FCP7 crashes every time I've tried to capture new foot
-
IPhoto '08 using iPhoto & Photoship cs5 as editor, choose every time?
I have been using iPhoto '08 for storing all my pictures and am also using it for basic editing. I also use Photoshop CS5 frequently. I know via preferences you can choose your external editor, which will then be your editor by default. I am wonderin