Error in extracting 0PROFIT_CTR hierarchy data

Hi,
I was trying to extract 0PROFIT_CTR Hierarchy. But it is giving following error msg. So guide me how to solve it.
Error in the hierarchy structure: see error log
The node name for ID 00001634 contains invalid characters

Hello,
The value for Master data has invalid chars, So please correct it and then try again.
Thanks
Chandran

Similar Messages

Error when Bulk load hierarchy data

Hi,
While loading P6 Reporting databases following message error appears atthe step in charge of Bulk load hierarchy data into ODS.
<04.29.2011 14:03:59> load [INFO] (Message) - === Bulk load hierarchy data into ODS (ETL_LOADWBSHierarchy.ldr)
<04.29.2011 14:04:26> load [INFO] (Message) - Load completed - logical record count 384102.
<04.29.2011 14:04:26> load [ERROR] (Message) - SqlLoaderSQL LOADER ACTION FAILED. [control=D:\oracle\app\product\11.1.0\db_1\p6rdb\scripts\DATA_WBSHierarchy.csv.ldr] [file=D:\oracle\app\product\11.1.0\db_1\p6rdb\temp\WBSHierarchy\DATA_WBSHierarchy.csv]
<04.29.2011 14:04:26> load [INFO] (Progress) - Step 3/9 Part 5/6 - FAILED (-1) (0 hours, 0 minutes, 28 seconds, 16 milliseconds)
Checking corresponding log error file (see below) I see that effectively some records are rejected. Question is: How could I identify the source of the problem and fix it?
QL*Loader: Release 11.1.0.6.0 - Production on Mon May 2 09:03:22 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File:   DATA_WBSHierarchy.csv.ldr
Character Set UTF16 specified for all input.
Using character length semantics.
Byteorder little endian specified.
Data File:      D:\oracle\app\product\11.1.0\db_1\p6rdb\temp\WBSHierarchy\DATA_WBSHierarchy.csv
Bad File:     DATA_WBSHierarchy.bad
Discard File: none specified
+(Allow all discards)+
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array:     64 rows, maximum of 256000 bytes
Continuation:    none specified
Path used:      Conventional
Table WBSHIERARCHY, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name                  Position   Len Term Encl Datatype
PARENTOBJECTID                      FIRST     * WHT      CHARACTER
PARENTPROJECTID                      NEXT     * WHT      CHARACTER
PARENTSEQUENCENUMBER                 NEXT     * WHT      CHARACTER
PARENTNAME                           NEXT     * WHT      CHARACTER
PARENTID                             NEXT     * WHT      CHARACTER
CHILDOBJECTID                        NEXT     * WHT      CHARACTER
CHILDPROJECTID                       NEXT     * WHT      CHARACTER
CHILDSEQUENCENUMBER                  NEXT     * WHT      CHARACTER
CHILDNAME                            NEXT     * WHT      CHARACTER
CHILDID                              NEXT     * WHT      CHARACTER
PARENTLEVELSBELOWROOT                NEXT     * WHT      CHARACTER
CHILDLEVELSBELOWROOT                 NEXT     * WHT      CHARACTER
LEVELSBETWEEN                        NEXT     * WHT      CHARACTER
CHILDHASCHILDREN                     NEXT     * WHT      CHARACTER
FULLPATHNAME                         NEXT 8000 WHT      CHARACTER
SKEY                                                      SEQUENCE (MAX, 1)
value used for ROWS parameter changed from 64 to 21
Record 14359: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 14360: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 14361: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 27457: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 27458: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 27459: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 38775: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 38776: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 38777: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 52411: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 52412: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 52413: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 114619: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 114620: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 127921: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 127922: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 164588: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 164589: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 171322: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 171323: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 186779: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 186780: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 208687: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 208688: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 221167: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 221168: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 246951: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 246952: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Table WBSHIERARCHY:
+384074 Rows successfully loaded.+
+28 Rows not loaded due to data errors.+
+0 Rows not loaded because all WHEN clauses were failed.+
+0 Rows not loaded because all fields were null.+
Space allocated for bind array:                 244377 bytes(21 rows)
Read   buffer bytes: 1048576
Total logical records skipped:          0
Total logical records read:        384102
Total logical records rejected:        28
Total logical records discarded:        0
Run began on Mon May 02 09:03:22 2011
Run ended on Mon May 02 09:04:07 2011
Elapsed time was:     00:00:44.99

Hi Mandeep,
Thanks for the information.
But still it doesnot seem to work.
Actally, i have Group ID and Group Name as display field in the Hiearchy table.
Group ID i have directly mapped to Group ID.
I have created a Split Hierarchy of Group Name and mapped it.
I have also made all the options configurations as per your suggestions, but it doenot work still.
Can you please help.
Thanks,
Priya.

Error when extracting the text data

Hi all
I am getting an error when transfering the text data thru flat files .
It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
pls suggest me.
thanks in advance
karna

hi,
you have to decline 0LANGU, STTXT(short text), MDTXT(medium text),
LGTXT(long text), and respective key field(primary key) of attribute for
text data source. give the above five info object's in transfer structure for
text data source and activate it.
if helpful provide points
regards
harikrishna.N

Error in uploading time hierarchy data to the cloud

I am having a trouble in updating a dataset with a time hierarchy.
I created a dataset in the local LUMIRA desktop from an excel sheet, add a time hierarchy, and tried to upload the dataset to the LUMIRA cloud. However, the system gave me an error and will not accept the data.
Could anyone having the same problem help me on how you have worked around this problem?
Thank you very much for your help and advice.
Kentaro Kawamoto

Dear Tammy,
Thank you very much for replying. Please let ma attach the screen copies.
It will be nice if you could have a glance at them and provide some feedback if I am doing wrong procedures.
The screens are copied from works in the local LUMIRA desktop.
Excel data looks like below. Year and month data are present
I created hiearchy for year and month, let system create Quarterly data.
As a sample, I created a graph for sales by month.
After composing the graph to a story, I upload the story and dataset to the cloud.
System returns error.

Error while Extraction of HR Data to LDAP with report RPLDAP_EXTRACT_IDM

Hello Experts,
After executing report RPLDAP_EXTRACT_IDM to extract data from HCM system to IDM 7.1 i am getting following runtime error:
SAPSQL_ARRAY_INSERT_DUPREC,
Statement not getting executed is:
INSERT tlda_log FROM TABLE ilda_log
I have deleted all entries from tlda_log table but no luck:(
Any help will be really appreciated.
Regards,
Dev

I guess the query is not correct to insert data from one table to another Or trying to insert duplicate records.
First drop the table then try to insert using the below query.
Select * into tlda_log FROM TABLE ilda_log.

BW Problem Extracting Custom Hierarchy

Hello Experts,
I have built a completely new hierarchy of new custom master data in R3. I then have used BW07 to create a datasource to extract the hierarchy data with no problems.
I have then created a new infoobject in BW and I have successfully loaded the master data. However when I assign the new Hierarchy datasource it shows the transfer structure with my infobject but with length 0 rather than the correct 8.
When I then perform a data load I get error the error "Syntax error in generated program, row 33". Looking at the code it has indeed got a data element defined with length 0.
What am I doing wrong? Everything seems to be generated, replicated and active. Any help will be greatly appreciated. I cant find anything similar on OSS and I would have thought this was basic functionality.

I have found the answer to this problem.
If the data element the hierarchy datasource is based on does not have a domain BW07 will not pick up the length of the field.
I here by award myself 2 Gold stars

Article hierarchy data

Hi Guru's,
I need to extract data from Article hierarchy data source. Could you please let me know the settings what i have to do in ECC for extracting article hierarchy data.
Thanks in advance....
Thanks,
Vijay.

Hi Vijay,
Have a look at below doc.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a4/b25641988e8247e10000000a1550b0/content.htm
Regards,
Venkatesh

InfoPackage error for Hierarchy data loads after upgrading to BI 7.31

Hi All,
We have recently upgraed to BI 7.31 from BI 7.01. After the upgrade we are observing info package error while loading the Hierarchy for 0BPARTNER infoobject, below is the long text for the error message.
Datasource name : 0BPARTNER_NAME_HIER
Error in the hierarchy structure: see error log
Message no. RH003
Diagnosis
The structure of the hierarchy contains errors. You can find a detailed description of the error in the log.
Procedure
Correct the error in the hierarchy structure as described in the log.
Screenshot for the Infopackage Details tab,
The error message suggests checking the error log, but there are no error logs to be reffered.
Please let us know if anyone have faced similar issue and help us resolving the same. Also let us know where to find the error log in such scenario.
We have already tried replicating the data source at BW side, but no success. We also checked the extractor at source system side and found it to be working alright.
Thanks & Regards,
Viraj

Hi Viraj,
Did you find a solution for your problem ?
Even am facing the same issue .Process chain is running fine without throwing any errors but if i try to run manually it getting failed.
when we check the data few of the nodes are not getting reflected which are maintained in source.
Error Message : Error in the hierarchy structure.
Source system : Extraction check performed and the record count is matching. We took the dump of data and where able to find the required data but in the maintain hierarchies it is not getting reflected
Could you please help me in the solution.
Thank you
Regards,
Madhav

Error while extracting the data in R/3 production system,

Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issue

It´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus

Error while extracting data from essbase

Hi All,
Now I'm tring to extract data from essbase by ODI, and at the sametime, I need to do some transformations, such as join with other relational tables or flat files to get more information about metadata. But unfortunately, once I add join into the interface, an error occurs. And it works fine if I extract directly (with no joins).
Is there any other way except using staging table? Our data vloume is large, using staging table will waste lots of storages.
The messages as below.
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: ODI Hyperion Essbase Adapter Version 9.3.1.1
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: Connecting to Essbase application [CORPPROD] on [172.18.93.150]:[1423] using username [admin].
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Successfully connected to the Essbase application.
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_FILE = D:\ODI_ESS_QUERIES\QUERY.TXT
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_TYPE = ReportScript
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_CALCULATION_SCRIPT = null
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXT_COL_DELIMITER =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option POST_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: inside getAppData()
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: Got Source Metadata
2011-07-12 23:34:01,119 ERROR [DwgCmdExecutionThread:null:49]: The number of columns returned by script [13] is less than the source data columns exposed [14]
com.hyperion.odi.essbase.ODIEssbaseException: The number of columns returned by script [13] is less than the source data columns exposed [14]
     at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.validateColumns(Unknown Source)
     at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.init(Unknown Source)
     at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
     at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
     at sun.reflect.GeneratedMethodAccessor769.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
     at org.python.core.PyMethod.__call__(PyMethod.java)
     at org.python.core.PyObject.__call__(PyObject.java)
     at org.python.core.PyInstance.invoke(PyInstance.java)
     at org.python.pycode._pyx85.f$0(<string>:1)
     at org.python.pycode._pyx85.call_function(<string>)
     at org.python.core.PyTableCode.call(PyTableCode.java)
     at org.python.core.PyCode.call(PyCode.java)
     at org.python.core.Py.runCode(Py.java)
     at org.python.core.Py.exec(Py.java)
     at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
     at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
     at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.k(e.java)
     at com.sunopsis.dwg.cmd.g.A(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
2011-07-12 23:34:01,119 INFO [DwgCmdExecutionThread:null:49]: Logging out and disconnecting from the essbase application.
From the working steps, I found a redundant column (Entity) was added while creating work table. Is it the reason?
create table HYP.C$_0CUX_ABC_HYP_INTERFACE
     C14_HSP_RATES      VARCHAR2(80) NULL,
     C3_ACCOUNT      VARCHAR2(80) NULL,
     C10_PERIOD      VARCHAR2(80) NULL,
     C7_SCENARIO      VARCHAR2(80) NULL,
     C9_CURRENCY      VARCHAR2(80) NULL,
     C15_YEAR      VARCHAR2(80) NULL,
     C6_DATATYPE      VARCHAR2(80) NULL,
     C2_VERSION      VARCHAR2(80) NULL,
     C1_CATEGORY      VARCHAR2(80) NULL,
     C12_ENTITY      VARCHAR2(80) NULL,
     C13_ENTITY      VARCHAR2(80) NULL,
     C11_DEPARTMENT      VARCHAR2(80) NULL,
     C8_PROJECT      VARCHAR2(80) NULL,
     C5_DATA      NUMBER(18,8) NULL
Appriciated!

Extract the essbase data to a staging area and then do the transformations in another interface.
The adaptor needs to extract the data first.
Cheers
John
http://john-goodwin.blogspot.com/

Error while extracting huge volumes of data from BW

Hi,
we see this error while extracting huge volumes of data (apprx 3.4 million and with more no.of columns) and we see this error.
R3C-151001: |Dataflow DF_SAPSI_SAPSI3131_SAPBW_To_Teradata
Error calling R/3 to get table data: <RFC Error:
Key: TSV_TNEW_PAGE_ALLOC_FAILED
Status: EXCEPTION SYSTEM_FAILURE RAISED
No more storage space available for extending an internal table.
>.
We are not sure if DoP works with source as SAP BW, but when tried with DoP also, we got the same error.
Will this issue be resolved with an R/3 or ABAP dataflow? Can anyone suggest some possible solutions for this scenario?
Sri

The problem is that you've reached the maximum memory configure for your system.
If this is batch job reconfigure the profile parameter
abap/heap_area_nondia
Markus

Error while extracting data using function module

Hello,
I created one generic datasource and i want to extract data with the option "Extraction by Function Module".
But when i specified function module name and was trying to save, it thrown a error message saying
'The specified table does not exist'.
What could be the reason?
Please help me out.
Thanks,
Regards,
Steve

Hi Steve,
Once you execute T.Code RSO2, you need to fill in the details and click Create, specify the Appl. Component and in Extraction by Function Module, give Function Module name and Extrct Structure in the given boxes.
"This structure is used by a DataSource that was created using the transaction RSO2 (generic extraction) and selects data using a function module.
The data must be transferred from this function module to an interface table E_T_DATA."
I'll try to comeup with small piece of code to sort your issue.
Hope it helps!!!!
Amit

Error while loading the master data into hierarchy

Hi,
When i am trying to load the master data into a hierarchy, it is showing me the following error.
"Invalid Entry, hierarchy xxxxxx does not exist".
Can you please tell me what might be the possible cause for this error.
Thanks,
Prateek

Hello
Have you created a hierarchy, I mean go to Transfer structure->Hierarchy structure
->create hierarchy, put a check of whether it is sorted or time dependent etc. after that while loading data through infopackage just check that you have selected an appropriate hierarchy name in hierarchy selection tab.
Hope it will help!!
Regards,
Sandeep

Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.

Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

Error in extracting 0PROFIT_CTR hierarchy data

Similar Messages

Maybe you are looking for