Image on monitor window does not match red playhead as it moves

While editing a movie, imported slides do not match the monitor view. As the red playhead moves along to the right, when a slide changes the image on the monitor remains on the previous slide. After about 15 secs the next slide appears, but briefly then it's on to the next slide.
This is annoying. I have tried everything I can think of to overcome this (eg rebooted, pulled the plists, varied length of slides, started new movie etc). Fortunately, it does not happen with imported movies from the video camera. I can overcome the problem by placing transitions between all the slides, eg use a one-frame cross-disolve, but I'd rather not have to trick it this way. Does anyone have any ideas on this please? Thanks,
Keith

I also had the same problem. I have discovered that it is due to the upgrade of Quicktime. To reinstall an older version of Quicktime is quite tricky but I have solved the problem. There is no need to uninstall Quicktime 7.6.6. as this will be done later during the installation of the earlier software. Try this: Download a copy of Pacifist. From www.mac.oldapps.com download a copy of Quicktime 7.6.4. Open Pacifist, drag the installer box icon of QT 7.6.4 onto the Pacifist window. Click open package. When asked click "Replace" check the "all" box. This will over-ride QT 7.6.6 replacing it with 7.6.4 and your problem should be solved. Good luck! Let me know how you get on, please.

Similar Messages

Image on monitor window does not match playhead as it moves

I am resurrecting this earlier thread because, although it received a star as "solved" it was not really solved. Since upgrading to Quicktime 7.6.6 I, too, have had similar problems, as apparently have several others.
Basically, on iMovie playback the playhead will skip through a still, so that the playback on the screen lags behind, and then will suddenly catch up by displaying the skipped still in a shortened duration as the playhead moves on. Makes it difficult to edit. Video clips are not affected. With me the issue occurred after I upgraded to Quicktime 7.6.6. Oddly, when I reverted back to the previous version, 7.6.4, the problem still persisted. I did the usual deletion of the com.apple.iMovie.plist file, and a permissions repair, but that did not help.
So, I am interested in whether anyone has solved this issue. There are workarounds, like inserting a one frame cross-dissolve and converting the stills to video by using Ken Burns with the same starting and end points. I am more interested in actually resolving the issue. Comments welcome.

Hi Rich 839. I also had the same problem. I have discovered that it is due to the upgrade of Quicktime. To reinstall an older version of Quicktime is quite tricky but I have solved the problem. There is no need to uninstall Quicktime 7.6.6. as this will be done later during the installation of the earlier software. Try this: Download a copy of Pacifist. From www.mac.oldapps.com download a copy of Quicktime 7.6.4. Open Pacifist, drag the installer box icon of QT 7.6.4 onto the Pacifist window. Click open package. When asked click "Replace" check the "all" box. This will over-ride QT 7.6.6 replacing it with 7.6.4 and your problem should be solved. Good luck! Let me know how you get on, please.

My import window does not allow me to pick the "move" option. How do I access it?

My import window does not allow me to pick the "move" option. How do I access it?

Because Adobe has taken the stance, within Lightroom, that it will not touch files on card. Your card serves as a fail-safe backup in the event of disaster.
Ejecting a card has no effect on your images and is allowed so that you can removed the card without intervention of the OS.
After you've ensured image fidelity and backup, accepted best practice is to reformat your card in-camera. Trust me, I don't want to be on this forum answering questions about why someone lost their files because they "moved" them. This has been debated many times on the forum.

Image appearance in Lightroom does not match exported .jpg

First time user of Lightroom, so be gentle.
I edit a RAW file in Lightroom and get it looking good, but when I export to jpg I run into a problem where the photo takes on a strong rosy hue.
This image shows the problem:
http://www.vaughnsphotoart.com/miscimg/colordifference.jpg
I took a screenshot of Lightroom, and superimposed the jpg output next to it.
I have been using RawShooter and have had no problems with the exported files matching the in-program image. I've had pretty good luck getting on-screen views to match my prints. So I'm a little baffled here at what to do. I see others are running into this as well (see http://www.adobeforums.com/cgi-bin/webx/.3bc34927/2 ) so a response might help many.
Am I correct to guess this has something to do with the Adobe ProPhoto color space?
What steps should I take to get my in-program image appearance match the exported version? I suspect I am missing a calibration process to get my color spaces to match, but I don't know how to affect the one Lightroom uses. Can anyone give some straightforward advice on what to do here?

I had exactly the same experience as Vaughn and David. I tried to do some tests of my own:
1. Exported a RAW image from LR as JPG, sRGB color space
2. Exported the exact same image as JPG specifying Adobe RGB
3. Exported the exact same image as TIFF (8bit, LZW compression), sRGB color
4. Exported the exact same image as TFF (8bit, LZW compression), Adobe RGB color space
The resulting images can be seen in the following web album:
http://picasaweb.google.com/Chris.Diewald/TestExportsFromAdobeLightroom.
(Most web browsers still do not care about embedded color space tags, but it appears that the images on the web page do not have a color-space tag anymore ! Still, they demonstrate what I see in other software on my screen.)
5. I opened these 4 images in Photoshop CS2, working space Adobe RGB (!), but specifically using the embedded profile (in the case of of sRGB exports).
Result: All 4 images - whether jpeg or TIFF, sRGB or Adobe RGB - look identical. And they are all identical to the likeness seen in LR!
6. I opened the sRGB images (jpg and TIFF) in Photoshop, but this time without preserving the embedded sRGB profile ("discard the embedded profile, don't color-manage"):
Result: The two sRGB images show a distinctive shift towards red and are a tad brighter. This was expected in a way.
7. I opened these 4 images in Microsoft Fax and Picture Viewer:
Result: All 4 images, whether TIFF or JPG, whether sRGB was embedded or Adobe RGB, are displayed identically, but *different* from what is seen in LR - more red and a bit brighter. Just like in Photoshop when the embedded sRGB profile was ignored.
8. Out of curiosity, I opened the 4 images in Picasa 2.5 (so popular with amateurs, so nice and so blindingly fast with huge masses of images. No comment on LR here...).
Result: Whether JPG or TIFF, the sRGB image comes out as redder and brighter, the AdobeRGB image exactly as viewed in LR!
9. Last Test: I opened the 4 images in Paintshop Pro 9.01
Result: same as those reported for Picasa. sRGB is not as seen in LR!
What does that suggest? I am not a color-space expert, so I leave that to those who know. But I am worrying whether LR really does what it says when I export?
Chris

FCPX media import import window does not match finder

So I am trying to import media from Drive:PROJECT01/COT OODOODD/CONTENTSA/ as you can see what I see in finder is not what I get in FCPX media import window... ??

it seems if I close down FCPX and restart everything is fine - mmmn not very useful.
Is this a 'known issue'?
So long as I leave the camera contents folder named as 'contents' then X will unwrap the mxf files inside - which is fine - but why does the media import window not refresh when I edit names and content in finder without having to restart FCPX?

Monitoring data does not match

Hallo! Has the following problem. Processor of a virtual machine loaded 100% but in dashboard azure peak loading of this VM 6-10% What does it mean? Why monitoring displaying incorrect data?

Hi,
Thanks for your reply.
Since it is an issue related to Azure management portal, I recommend you to ask in the forum below for assistance if the issue persists:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=windowsazuremanagement
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Receipt Qty in AP invoice does not match with actual receipt qty.

Hello everyone,
I am facing an issue in oracle Payables module. When we match invoice with receipt while preparing invoices, Quantity received shown in the Receipt quantity block in invoice window does not match with actual receipt quantity of that item. Due to this difference user is not able to book the invoice. Please help me to resolve this issue.
Thanks,
Himanshu Gupta

Exactly. What i mean is in the invoice window, There is a block called reciept quantity shown in the lower part. The received quantity displayed in that block is more the actual quantity being recieved. (when we see the recieving transactions). is this a bug?
thanks for your reply, awaiting your response......
Himanshu Gupta

[MacOSX 10.10] [RDP 8.0.12] Remote screen does not match containing window size or monitor

Hello. I am facing a very strange issue that I have never seen before. When I connect to a remote host, the host's screen does not match my client screen, and instead spills over into two monitors. This happens in full screen mode. When switching to windowed
mode, only a portion of the remote host shows, the rest is a black screen.
I would love to post example pics but this site wont let me until I verify my account, but I have no email asking me to do so...

A few notes:
- I have tried a restart.
- I am running two displays, one is the built in 1440x900, one is an external 1920x1200
- I am on OSX10.10.1
- RDP is 8.0.12
- I have tested this against Windows 7 Pro machines
- This was working fine a week ago, just started this week.
Graphics Properties Dump:
Chipset Model: NVIDIA GeForce GT 650M
Type: GPU
Bus: PCIe
PCIe Lane Width: x8
VRAM (Total): 1024 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0fd5
Revision ID: 0x00a2
ROM Revision: 3682
gMux Version: 1.9.23
Displays:
Color LCD:
Display Type: LCD
Resolution: 1440 x 900
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Built-In: Yes
HP LA2405x:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display:
Yes
Mirror: Off
Online: Yes
Rotation: Supported

Windows 8 error "product key does not match any of the Windows images available for installation"

Hi Experts
My HP Pavilion laptop came with window 8. I made the USB recovery for windows 8 using hp recovery manager. My windows was corrupted, while I was trying to install windows 7 in dual boot.
I used above USB recovery to restore factory default. But every time it is giving me error "HP Recovery Manager Failed error code = 0xefffff08"
Then I downloaded the OEM ISO mage for windows 8 and tried to do the clean install but now installation process is giving me error "The product key entered does not match any of the Windows images available for installation. Enter a different product key"
Please help me. To whom I have to contact?

Hi ghost-rider,
Thank you for your query, I will do my best to assist you.
I understand you tried to do a recovery and you received this error "oxefffff08".
First I would suggest you run a hardware diagnostics. Testing for Hardware Failures (Windows 8)
If no hardware failures are located, you have ruled that possibility out.
Here is a link to Troubleshooting HP System Recovery Problems (Windows 8) that may help.
If you are still having an issue doing a recovery, I suggest contacting HP support and explain the issue you are having with doing a recovery. They may have another option available for you.
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region Technical Support Sitemap
The clean install from an OEM image is looking for the product code as it does not match the one that came with the computer, You would need a new code.
I hope this has helped.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

The product key entered does not match any of the Windows images available for installation. Enter a different product key.

how do you manage to install windows 7 when the message on the screen is "The product key entered does not match any of the Windows images available for installation. Enter a different product key. "

That's a really helpful answer and not smug at all, thanks Carey.
I just downloaded a DVD image from my university's MSDN Academic Alliance program, named "Microsoft
Windows 7 with Service Pack 1 Debug/Checked Build 64-bit (English)", which I wanted to use to install over an existing 32-bit version. I thought the install screen was giving this weird unskippable error described in the OP before I even entered
a key because the 32-bit key I had used on the HDD was somehow interpreted to be used in an upgrade, but no. Even after I wiped the hard drive, this error persisted.
Guess I'll go Google some more on how to install my legit copy of Windows, because this self-serving shit sure isn't helping.
edit: IF YOU GOOGLED THIS AND ARE STILL LOOKING FOR YOUR ANSWER, CHECK HERE:
http://answers.microsoft.com/en-us/windows/forum/windows_8-windows_install/the-product-key-entered-does-not-match-any-of-the/47e6f575-5792-404b-9b7f-2065bdb91011

Photoshop window does not display unless connected to external monitor

I use a MBP connected it to an Apple Cinema Display used as an external monitor (not a dual display) when in my studio.
When I use Adobe Photoshop CS 5 without the monitor the image window does not display on the MBP. If I plug the external monitor in, the window is displayed correctly on the MBP. Photoshop is opening and "displaying" the image window offscreen. Nothing gets it back onscreen, except plugging in the external monitor.
I often use Photoshop away from my studio so this is a big problem. PShop is essentially unusable unless connected to an external monitor.
Is this a known issue?
Any workarounds?
Any ideas?
There is a previous discussion on this topic from January 2012, but it remains open and unanswered. Hoping there are some new ideas. Thanks for the help.

The MacOS still thinks the second display is available and valid -- so Photoshop puts the documents on the last used display and the OS doesn't give any errors.
Once the OS notices the change in display configuration, Photoshop should go back to the main display and force images and dialogs back to the main display.
Applications rely on the OS for the display configuration, and sometimes the OS gets confused or holds onto outdated configurations a bit too long...

ERROR ITMS-9000: "File given does not match type JPEG ... Image is likely corrupt

Hi ALl,
On compliing my book get these errors with ITunes producer...I've resaved the files out with photoshop and they seems fine?
Package Summary:
1 package(s) were not uploaded because they had problems:
          /Users/Umran/Music/iTunes Producer/Playlists/9780957408654.itmsp - Error Messages:
                    Apple's web service operation was not successful
                    Unable to authenticate the package: 9780957408654.itmsp
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1cf629f[userString=An unknown error occured while parsing. Image is likely corrupt. Exception message: null]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1801285[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@1e056e9[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@11d58e0[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-9000: "File given does not match type JPEG Image because of these validation issues: ; Error=com.apple.jingle.leghorn.fileformat.ValidationError@127c00e[userString=We reached the end of the file before we expected. Image is likely corrupt]" at Book (MZItmspBookPackage)
                    ERROR ITMS-5107: "VirtualLandscapesTheModernEra20002012.epub: Fixed-layout books must supply a text or bodymatter starting location in the guide." at Book (MZItmspBookPackage)
Any advice??? Hope someone can help!

iBookstore Publisher Support send me a fast response email which included some helpful info:
Please make sure that all image files inside the ePub end with one of the following: ".tif", ".jpg", or ".png" and that the file itself matches the file extension type. To check if the image file matches the file extension type, please right click on the image then select "Get Info". Once the info tab appears, please make sure that the file extension type of the image file matches the "Kind" found under "General".
For further information regarding embedded images, please refer to the iBookstore Asset Guide, which is available for download in the Deliver Your Content module in iTunes Connect.
And they INCLUDED THE TRANSPORTER LOG (!), the log generated by iTunes Producer as it tries to upload a book. We were able to search for the Validation Error # within the log and find out which image Producer was trying to upload when it encountered an error. Turns out the problem was a corrupted screenshot jpeg.
Grateful!

Messages menu status does not match Buddy List window

Using Messages in Yosemite, the status of my logged-in buddies listed in the menu bar does not match the status of my buddies in the Buddies window. I have buddies listed in the window that are not in the menu bar and vice versa.
It seems that the menu bar list may not be updating correctly--when I try to message them, the chat window sometimes says they are "idle"
MacBook Pro, 15", early 2011
10.10.1
Core i7
8GB ram
Buddies are using Messages as well as google talk.
Thanks!

Hi,
Sending Feedback to Apple rarely (if ever) gets a response. At iChat 3 release with OSX 10.4 there was an issue that I gave feedback for.
I also happened to mention the issue in the Lounge Area for "New Technical Issues" and the Host linked to the iChat forums there were back then contacted me about it and had me run some stuff for Engineering. (that's a possible once in 10 years like you).
iChat 5 in Snow Leopard
The process on how to display a particular Set of Buddies is different (as you will see with the next pic)
However I only see those "Available" in a full sense in the Menu Drop Down.
Idle (Amber) is technically Available + (a second level of Available if you like)
Yosemite/Messages 8+ (Mavericks is also listed as Messages 8)
The whole thing as I have several Accounts Logged in does fill my screen top to bottom.
These pics agree with your first paragraph.
I will let my MacBook Pro go Idle as it has one Account in iChat there that is not on my iMac and see if the Menu Drop down changes when it does.
I will have to wait for this to happen.
7:57 PM Wednesday; November 26, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Print Res Unchecked, Image does not match native resoltuion

Many of my images already have their resolution and height/width dimensions set in PS. My understanding is that when the print resolution checkbox is unchecked in LR, then the image should be at its native resolution and size and will print the same size as when printed from PS.
However, I find that when I uncheck the resolution checkbox, the image size as shown in LR Print module does not match the native resolution and size. For example a psd file in PS CS3 shows an image size of 16 x 10.25 @ 200 ppi. In LR the same image shows a print size of 15.3 x 9.81 @ 209 ppi. I have checked both tif and psd files, and similar discrepancies exist.
I wonder if I am doing something wrong or misunderstanding something? Thanks for your help

That was Page Setup, sorry (which actually opens a Print Setup dialogue, at least on a PC). There you can choose printer and paper size. Then in Layout panel you choose how to arrange the picture(s) within the page, and the combination of the two will determine the print size, right?
Anyway, I believe I understand your concern now, which is about printing at 100% of the size indicated by the TIFF or PSD file, as PS can do. I did not find a way to direct LR to do the same.
The Print Resolution, when unchecked, doesn't behave like you expect. If you check it, LR will re-sample the image to print it at the resolution you indicated there, whatever the output size. If you un-check it, LR will not re-sample the image; still it will re-size it based on your Page Setup and Layour settings, and the printer driver/printer will do the needed re-sampling. At least this is my understanding.

Error 'window SRID does not match layer SRID' despite using Index MBR

Hey!
I'm trying to run the following query:
SELECT count(*)
FROM mytable
WHERE SDO_FILTER(geom, (SELECT sdo_root_mbr FROM user_sdo_index_metadata WHERE sdo_index_name='IDX_GEOM_MYTABLE') ,'querytype = WINDOW') = 'TRUE';
The index I'm querying in the Subquery is the geometry index for mytable.geom, i.e. I'm doing a spatial query on IDX_GEOM_MYTABLE with it's own geometry index'es MBR. And I get this:
"window SRID does not match layer SRID"
How can that happen?
Regards,
Christian

John's right. If I see correctly what you're trying to do you could also do this:
SELECT count(*)
FROM mytable
WHERE SDO_FILTER(geom, SDO_TUNE.EXTENT_OF(mytable,my_SDO_column) ,'querytype = WINDOW') = 'TRUE';
If the Index was built correctly and is not partitioned this should give you the same result.

Image on monitor window does not match red playhead as it moves

Similar Messages

Maybe you are looking for