Error in Forms while calling The procedure

Dear All
I am using Forms 10G.
I have 2 procedure in Program unit .I am calling this 2 procedure in when button press trigger .And it was working fine .
But now it is not working .
Means i have written this in When Button Pressed trigger .
Begin
     Select PAYMENT_PURPOSE_CODE into :global.purps
     From MU_PURPOSE_CODE
     Where DESCRIPTION = :Loader.PURPS;
:global.date := :loader.date;
:global.cir := :loader.cir;
:global.acct_no := :loader.acct_no;
LOAD_DATA1;
LOAD_DATA2;
End;
Now it is going to LOAD_DATA2 procedure but not going the 1st one.
Any reason ?
Edited by: Sandy on Sep 13, 2010 6:35 PM

Put messages in your procedure, or run the form in debug mode.
Francois

Similar Messages

Display invalid pattern name while calling the procedure inside the package

Hi ,
I'am trying to call a package which is having procedure ,from JDBC in which one of the return type is Varray from the procedure.When i'am calling the procedure inside the package
from java showing invalid name pattern name.Just i'am placing the code snippet for package and calling java through package.
Package body
create or replace package body Rewards_Summary_Package as
PROCEDURE Rewards_Summary_Procedure
(v_Tot_Earned_Points OUT NUMBER, v_TOT_REDEEMED OUT NUMBER, v_TOT_PTS_EXP OUT NUMBER,
v_TOT_AVAILABLE OUT NUMBER, v_TIER_NAME OUT VARCHAR2,VA OUT t_varray,V_PR_CON_ID IN VARCHAR2) AS
v_ACCRUALED_VAL NUMBER := 0;
v_USED_VAL NUMBER := 0;
/*v_TOT_ACCRUALED_VAL NUMBER := 0;
v_TOT_USED_VAL NUMBER := 0;
V_PR_TIER_ID VARCHAR2(30);
V_PR_CON_ID VARCHAR2(30);
V_EXPIRY_DT DATE;
v_month varchar2(30);
v_date date;
v_next_month_date date;
v_TIER_NAME VARCHAR2(50);
v_TOT_AVAILABLE NUMBER := 0;
v_EARNED NUMBER := 0;
v_TOT_EARNED NUMBER := 0;
v_TOT_REDEEMED NUMBER := 0;
v_TOT_EXPIRED NUMBER := 0;
v_EARNED_TOTAL NUMBER := 0;
v_TOT_EXPIRED_MONTH NUMBER := 0;
v_TOT_PTS_EXP NUMBER := 0;
v_TOT_RDMD_CANCELLED NUMBER :=0;
v_TOT_EARNED_POINTS NUMBER :=0;*/
v_FIRST_DT DATE;
v_LAST_DT DATE;
v_MEMBER_ID VARCHAR2(30);
V_EXPIRED_VAL Number;
v_TOT_PRDPTS_RDMD NUMBER := 0;
v_TOT_PTS_RDMD NUMBER := 0;
v_CAN_ACCRUAL_POINTS NUMBER := 0;
BEGIN
/*TotalRwdPoints and Tier Name*/
SELECT TR.NAME,MEM.POINT_TYPE_A_VAL,MEM.ROW_ID INTO v_TIER_NAME,v_TOT_AVAILABLE,v_MEMBER_ID
FROM SIEBEL.S_LOY_MEMBER MEM, SIEBEL.S_LOY_TIER TR WHERE MEM.PR_DOM_TIER_ID=TR.ROW_ID
AND MEM.PR_CON_ID=V_PR_CON_ID;
vTotPrdPtsRdmd
SELECT NVL(SUM(A.VALUE),0) INTO v_TOT_PRDPTS_RDMD from SIEBEL.S_LOY_RDM_ITM A,SIEBEL.S_LOY_ATTRDEFN B
WHERE A.MEMBER_ID = v_MEMBER_ID AND A.ATTRB_DEFN_ID = B.ROW_ID AND b.INTERNAL_NAME = 'Point 1 Value' AND A.TYPE_CD='Product'
AND A.TXN_ID IS NOT NULL;
vTotPtsRdmd
SELECT NVL(SUM(A.VALUE),0) INTO v_TOT_PTS_RDMD from SIEBEL.S_LOY_RDM_ITM A,SIEBEL.S_LOY_ATTRDEFN B
WHERE A.MEMBER_ID = v_MEMBER_ID AND A.ATTRB_DEFN_ID = B.ROW_ID AND b.INTERNAL_NAME = 'Point 1 Value' AND (A.TYPE_CD='Product' or A.TYPE_CD='Transfer')
AND A.TXN_ID IS NOT NULL;
vTotRewardPtExp
SELECT NVL(SUM(A.VALUE),0) INTO v_TOT_PTS_EXP FROM SIEBEL.S_LOY_RDM_ITM A,SIEBEL.S_LOY_ATTRDEFN B
WHERE A.MEMBER_ID = v_MEMBER_ID AND A.ATTRB_DEFN_ID = B.ROW_ID AND b.INTERNAL_NAME = 'Point 1 Value' AND A.TYPE_CD='Expired'
AND a.TXN_ID IS NULL;
vCanAccrualPoints
SELECT NVL(SUM(A.ACCRUALED_VALUE),0) INTO v_CAN_ACCRUAL_POINTS from SIEBEL.S_LOY_ACRL_ITM A,SIEBEL.S_LOY_ATTRDEFN B
WHERE A.MEMBER_ID = v_MEMBER_ID AND A.ATTRIB_DEFN_ID = B.ROW_ID AND b.INTERNAL_NAME = 'Point 1 Value' AND A.TYPE_CD='Cancellation';
v_Tot_Earned_Points := v_TOT_AVAILABLE+v_TOT_PRDPTS_RDMD+v_TOT_PTS_EXP-v_CAN_ACCRUAL_POINTS;
v_TOT_REDEEMED := v_TOT_PTS_RDMD-v_CAN_ACCRUAL_POINTS;
DBMS_OUTPUT.PUT_LINE(' Total Earned: '|| v_Tot_Earned_Points || ' Total Redeemed: '|| v_TOT_REDEEMED || ' Total Expired: '|| v_TOT_PTS_EXP
|| ' Balance Points: '|| v_TOT_AVAILABLE || ' Tier Name: '|| v_TIER_NAME);
select trunc(sysdate,'MONTH') INTO v_FIRST_DT from dual;
va:= t_varray(Null,Null,Null,Null,Null,Null);
FOR a in 1 .. 6 LOOP
select trunc(last_day(v_FIRST_DT)) INTO v_LAST_DT from dual;
SELECT SUM(AI.ACCRUALED_VALUE),SUM(AI.USED_VALUE) INTO v_ACCRUALED_VAL,v_USED_VAL from SIEBEL.S_LOY_ACRL_ITM AI,SIEBEL.S_LOY_ATTRDEFN A
WHERE AI.MEMBER_ID = v_MEMBER_ID AND A.ROW_ID = AI.ATTRIB_DEFN_ID AND A.INTERNAL_NAME = 'Point 1 Value'
AND trunc(AI.EXPIRATION_DT) >= v_FIRST_DT AND trunc(AI.EXPIRATION_DT) <= v_LAST_DT;
V_EXPIRED_VAL := NVL(v_ACCRUALED_VAL-v_USED_VAL,0);
va(a):=V_EXPIRED_VAL;
v_FIRST_DT := add_months(v_FIRST_DT,1);
End loop;
END;
end;
Package declaration
create or replace package Rewards_Summary_Package as
TYPE t_varray IS VARRAY(6) OF NUMBER;
PROCEDURE Rewards_Summary_Procedure
(v_Tot_Earned_Points OUT NUMBER, v_TOT_REDEEMED OUT NUMBER, v_TOT_PTS_EXP OUT NUMBER,
v_TOT_AVAILABLE OUT NUMBER, v_TIER_NAME OUT VARCHAR2,VA OUT t_varray,V_PR_CON_ID IN VARCHAR2);
end;
java code
I had tried using java types and Oracle types
conn=SiebelServiceDatasource.getConnection(SSBConstants.REWARDS_PROP_LOG_SUFIX);
// ArrayDescriptor.TYPE_VARRAY
ocstmt=(OracleCallableStatement)conn.prepareCall(" {call REWARDS_SUMMARY_PACKAGE.REWARDS_SUMMARY_PROCEDURE(?,?,?,?,?,?,?)}");
//ocstmt=(OracleCallableStatement)conn.prepareCall(" call Test_Array(?,?)");
ocstmt.registerOutParameter(1,OracleTypes.INTEGER);
ocstmt.registerOutParameter(2,OracleTypes.INTEGER);//1-616BH
ocstmt.registerOutParameter(3,OracleTypes.INTEGER);
ocstmt.registerOutParameter(4,OracleTypes.INTEGER);
ocstmt.registerOutParameter(5,OracleTypes.VARCHAR);
ocstmt.registerOutParameter(6,OracleTypes.ARRAY,"SIEBEL.T_VARRAY");
ocstmt.setString(7,contactSiebelRowId);
ocstmt.execute();
Showing the following invalid name pattern SIEBEL.T_VARRAY
Please help
Thanks in advance
Kiran

create or replace package Rewards_Summary_Package as
TYPE t_varray IS VARRAY(6) OF NUMBER;
end;You've declared your type inside the package. You need to declare it as a SQL type, which is not part of a PL/SQL package.

Error ORABPEL-11802 while calling Stored Procedure

Hi,
I am trying to call a stored proc in oracle through DB adapter in BPEL services.
The procedure accepts custom data types only. I am able to assign values to each element in the custom data type but while executing the same it is throwing the error:
ORABPEL-11802
Unable to convert the XSD element db:THENUMBERRANGE whose user defined type is NUMBERRANGE. Cause: java.sql.SQLException: invalid name pattern: XYZ.NUMBERRANGE [Caused by: invalid name pattern: XYZ.NUMBERRANGE]
The Stored Procedure code is as follows:
--PROCEDURE setNumberStatus (
--theNumberRange IN NumberRange,
--theNumberStatus IN numberstatus,
--userID IN userid,
--returnStatus OUT CallStatus );
--TYPE NumberRange is OBJECT (
--StartNumber Varchar2(40),
--EndNumber Varchar2(40),
Please suggest me how to input data for object NumberRange.
Any help on this is highly appreciated.
Thanks,

Hi,
I have the same issue, but in my case I hae done all the accesses still i was getting the error, However finally what I figured out is that the JNDI name was wrong, so unable to make a databse connection at runtime. So Basically it was unable to find the object .... and causing the same error. Hope this tip also may be helpful for some body.
--Khaleel

Error in Forms while creating the trigger- WHEN-CREATE-RECORD

Hello,
Right now I am using 11g client side and 10g database.
I am constantly getting an error while creating triggers in 11g.
I have created a sequence in SQL developer using the following code:
create sequence loc_id_sequence
start with 14;
After creating the sequence. I am trying to write the PL/SQL code in forms builder for the trigger WHEN-CREATE-RECORD
declare
loc_id number;
begin
loc_id := loc_id_sequence.nextval;
end;
But I have been getting the following error constantly. Can anyone please help me?
"Error 0 at line 5, column 4
SQL statement ignored".
Can anyone please tell me why I am getting that error

In fact, even I thought there might be some problem with the connectivity with the 10g database and 11g client but the other DB related code works.
I just have the problem with using sequence for the trigger WHEN-CREATE-RECORD.
In fact I also tried using WHEN-NEW-RECORD-INSTANCE smart trigger instead of WHEN-CREATE-RECORD for the same sequence. But even that doesn't work.
Do u have any idea of what that error means?
"Error 0 at line 5, column 4
SQL statement ignored"
Edited by: Pooja 1985 on Feb 26, 2013 5:43 PM
Edited by: Pooja 1985 on Feb 26, 2013 5:44 PM

FIM "failed while calling the BPC system"

Hi guys.
Hope there's an FIM wizard out there.
We have FIM installed on our BPC server (BPC 7.5 SP06 & FIM 7.5 SP08)
I am seeing an issue with the connection manager in FIM:
When I create a new connection, it seems to form correctly (resolves name/IP and gets the list of AppSets from the server)
However, when I log out and go back in to FIM and check the list of connections, I see an error:
"Error Loading Data Models"
The detail of this error is:
Failed while calling the 'Business Planning and Consolidation (BPC)' system to perform the 'GetApplicationSetList' action. : javax.xml.ws.WebServiceException:
org.apache.cxf.service.factory ServiceConstructionException: Failed to create service
This happens whether I connect using the server name, the FQDN or the IP Address and seems to be the very definition of inconsistency.
(Why should it see the list of AppSets when the connection is first made, but then fail afterward)
I am connecting using a secEnterprise login which is mapped to an alias of the BPC Sys Admin account (using LDAP).
Please help if you can, as this is driving me insane.
Thanks

Update.
I have added the output of the STDOUT log file (including the last couple of things to complete before the ERROR is reported):
<-- Start Code -->
2011-11-16 16:28:54,163 DEBUG [org.springframework.jdbc.datasource.DataSourceTransactionManager] - <Creating new transaction with name [com.sap.fpm.fim.datamodel.IModelProviderService.getDataSourceModels]: PROPAGATION_REQUIRED,ISOLATION_DEFAULT,readOnly>
2011-11-16 16:28:54,163 DEBUG [com.sap.fpm.fim.server.util.DataSourceWrapper] - <Creating new JDBC Connection to [jdbc:sqlserver://[REPOSITORY_SERVER]:1433;databaseName=DSLocalRepository]>
2011-11-16 16:28:54,170 DEBUG [org.springframework.jdbc.datasource.DataSourceTransactionManager] - <Using transaction object [org.springframework.jdbc.datasource.DataSourceTransactionManager$DataSourceTransactionObject@892539]>
2011-11-16 16:28:54,170 DEBUG [org.springframework.jdbc.datasource.DataSourceTransactionManager] - <Creating new transaction with name [com.sap.fpm.fim.datamodel.IModelProviderService.getDataSourceModels]: PROPAGATION_REQUIRED,ISOLATION_DEFAULT,readOnly>
2011-11-16 16:28:54,170 DEBUG [com.sap.fpm.fim.server.util.DataSourceWrapper] - <Creating new JDBC Connection to [jdbc:sqlserver://[REPOSITORY_SERVER]:1433;databaseName=DSLocalRepository]>
2011-11-16 16:28:54,172 DEBUG [org.springframework.jdbc.datasource.DataSourceTransactionManager] - <Acquired Connection [ConnectionID:46] for JDBC transaction>
2011-11-16 16:28:54,172 DEBUG [org.springframework.jdbc.datasource.DataSourceUtils] - <Setting JDBC Connection [ConnectionID:46] read-only>
2011-11-16 16:28:54,172 DEBUG [org.springframework.jdbc.datasource.DataSourceTransactionManager] - <Switching JDBC Connection [ConnectionID:46] to manual commit>
2011-11-16 16:28:54,172 DEBUG [org.springframework.transaction.support.TransactionSynchronizationManager] - <Bound value [org.springframework.jdbc.datasource.ConnectionHolder@1eacdc4] for key [com.sap.fpm.fim.server.util.DataSourceWrapper@1880543] to thread [http-8585-Processor25]>
2011-11-16 16:28:54,172 DEBUG [org.springframework.transaction.support.TransactionSynchronizationManager] - <Initializing transaction synchronization>
2011-11-16 16:28:54,179 DEBUG [org.springframework.jdbc.datasource.DataSourceTransactionManager] - <Acquired Connection [ConnectionID:47] for JDBC transaction>
2011-11-16 16:28:54,179 DEBUG [org.springframework.jdbc.datasource.DataSourceUtils] - <Setting JDBC Connection [ConnectionID:47] read-only>
2011-11-16 16:28:54,179 DEBUG [org.springframework.jdbc.datasource.DataSourceTransactionManager] - <Switching JDBC Connection [ConnectionID:47] to manual commit>
2011-11-16 16:28:54,179 DEBUG [org.springframework.transaction.support.TransactionSynchronizationManager] - <Bound value [org.springframework.jdbc.datasource.ConnectionHolder@18bea70] for key [com.sap.fpm.fim.server.util.DataSourceWrapper@1880543] to thread [http-8585-Processor23]>
2011-11-16 16:28:54,179 DEBUG [org.springframework.transaction.support.TransactionSynchronizationManager] - <Initializing transaction synchronization>
2011-11-16 16:28:54,188 INFO [com.sap.fpm.fim.server.security.impl.BOESecurity] - <getUserInfo for token = 3&35=[BPC_SYS_ADMIN_ACCOUNT],8P&63=secEnterprise,8P&4F=1034,8P&4E=[Removed for security reasons],8P&1,8P&3k=@[REPOSITORY_SERVER_NAME].[FQDN_PATH]:6400,8P&5U=
[Removed for security reasons][Removed for security reasons],8P&S5,88&pa,8P&Tm=3650,83&2r=[REPOSITORY_SERVER_NAME].[FQDN_PATH]:6400,8P&Tn={3&.2={3&O=PersonalCategory,8P&2=1036,83},?z&.1={3&O=FavoritesFolder,8P&2=1035,83},?z&.3={3&O=Inbox,8P&2=1037,83},?z&U=3,83},?z&PP=1024,83&7r,83, the returnedUserObject = username = [BPC_SYS_ADMIN_ACCOUNT], locale = en_GB, ItUserGroup = true, BusinessUserGroup = true, AuditUserGroup = false, ExecUserGroup = false>
2011-11-16 16:28:54,302 INFO [com.sap.fpm.fim.server.security.impl.BOESecurity] - <getUserInfo for token = 3&35=[BPC_SYS_ADMIN_ACCOUNT],8P&63=secEnterprise,8P&4F=1034,8P&4E=[Removed for security reasons],8P&1,8P&3k=@[REPOSITORY_SERVER_NAME].[FQDN_PATH]:6400,8P&5U=[Removed for security reasons][Removed for security reasons],8P&S5,88&pa,8P&Tm=3650,83&2r=[REPOSITORY_SERVER_NAME].[FQDN_PATH]:6400,8P&Tn={3&.2={3&O=PersonalCategory,8P&2=1036,83},?z&.1={3&O=FavoritesFolder,8P&2=1035,83},?z&.3={3&O=Inbox,8P&2=1037,83},?z&U=3,83},?z&PP=1024,83&7r,83, the returnedUserObject = username = [BPC_SYS_ADMIN_ACCOUNT], locale = en_GB, ItUserGroup = true, BusinessUserGroup = true, AuditUserGroup = false, ExecUserGroup = false>
2011-11-16 16:28:55,099 ERROR [com.sap.fpm.fim.datamodel.BPCModelProvider] - <Failed while calling the 'Business Planning and Consolidation (BPC)' system to perform the 'GetApplicationSetList' action.>
javax.xml.ws.soap.SOAPFaultException: Could not send Message.
 at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:218)
 at $Proxy67.connect(Unknown Source)
 at com.sap.fpm.fim.datamodel.BPCModelProvider.getSessionID(BPCModelProvider.java:401)
 at com.sap.fpm.fim.datamodel.BPCModelProvider.getModels(BPCModelProvider.java:281)
 at com.sap.fpm.fim.datamodel.ModelProviderManager.getDataSourceModels(ModelProviderManager.java:351)
 at com.sap.fpm.fim.datamodel.ModelProviderServices.getDataSourceModels(ModelProviderServices.java:133)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:301)
 at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
 at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
 at org.springframework.transaction.interceptor.TransactionInterceptor.invoke(TransactionInterceptor.java:106)
 at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
 at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
 at $Proxy27.getDataSourceModels(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:585)
 at org.apache.cxf.service.invoker.AbstractInvoker.performInvocation(AbstractInvoker.java:127)
 at org.apache.cxf.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:82)
 at org.apache.cxf.jaxws.JAXWSMethodInvoker.invoke(JAXWSMethodInvoker.java:97)
 at org.apache.cxf.service.invoker.AbstractInvoker.invoke(AbstractInvoker.java:68)
 at org.apache.cxf.interceptor.ServiceInvokerInterceptor$1.run(ServiceInvokerInterceptor.java:56)
 at org.apache.cxf.workqueue.SynchronousExecutor.execute(SynchronousExecutor.java:37)
 at org.apache.cxf.interceptor.ServiceInvokerInterceptor.handleMessage(ServiceInvokerInterceptor.java:92)
 at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:221)
 at org.apache.cxf.transport.ChainInitiationObserver.onMessage(ChainInitiationObserver.java:78)
 at org.apache.cxf.transport.servlet.ServletDestination.invoke(ServletDestination.java:92)
 at org.apache.cxf.transport.servlet.ServletController.invokeDestination(ServletController.java:214)
 at org.apache.cxf.transport.servlet.ServletController.invoke(ServletController.java:151)
 at org.apache.cxf.transport.servlet.AbstractCXFServlet.invoke(AbstractCXFServlet.java:170)
 at org.apache.cxf.transport.servlet.AbstractCXFServlet.doPost(AbstractCXFServlet.java:148)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
 at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
 at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
 at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
 at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
 at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
 at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
 at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
 at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
 at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
 at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
 at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
 at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
 at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
 at java.lang.Thread.run(Thread.java:595)
Caused by: org.apache.cxf.interceptor.Fault: Could not send Message.
 at org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:64)
 at org.apache.cxf.phase.PhaseInterceptorChain.doIntercept(PhaseInterceptorChain.java:221)
 at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:276)
 at org.apache.cxf.endpoint.ClientImpl.invoke(ClientImpl.java:222)
 at org.apache.cxf.frontend.ClientProxy.invokeSync(ClientProxy.java:73)
 at org.apache.cxf.jaxws.JaxWsClientProxy.invoke(JaxWsClientProxy.java:177)
 ... 50 more
Caused by: java.net.HttpRetryException: cannot retry due to server authentication, in streaming mode
 at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:1008)
 at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:367)
 at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.handleResponse(HTTPConduit.java:1896)
 at org.apache.cxf.transport.http.HTTPConduit$WrappedOutputStream.close(HTTPConduit.java:1824)
 at org.apache.cxf.io.CacheAndWriteOutputStream.postClose(CacheAndWriteOutputStream.java:47)
 at org.apache.cxf.io.CachedOutputStream.close(CachedOutputStream.java:159)
 at org.apache.cxf.transport.AbstractConduit.close(AbstractConduit.java:66)
 at org.apache.cxf.transport.http.HTTPConduit.close(HTTPConduit.java:583)
 at org.apache.cxf.interceptor.MessageSenderInterceptor$MessageSenderEndingInterceptor.handleMessage(MessageSenderInterceptor.java:62)
<-- End Code -->

Error while calling the Mapping function module for BW Extraction

Hi
iam getting runtime error while calling the BW mapping function
The error description is as shown below.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "GP466CV1Y7W2VML1PJ3VB80KDOP" had to be terminated
 because it has
 come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "CALL_MAPPING_FUNCTION" "(FORM)", nor was it propagated by a RAISING
 clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "CMS_CB_BW_MAP", the STRUCTURE parameter "EXTRACT_DATA" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter " " has an incompatible fragment view.
I am passing the EXTRACT_DATA parameter as specification LIKE with the associated type - corresponding structure
Please let me know how can i resolve this issue
Regards
Leon

Dear benarji ,
I'm having the same problem help me to correct . I have mentioned below as what error i got.
Runtime Errors CALL_FUNCTION_UC_STRUCT
Except. CX_SY_DYN_CALL_ILLEGAL_TYPE
Short text
 Type conflict during structure parameter transfer at CALL FUNCTION.
What happened?
 Error in the ABAP Application Program
 The current ABAP program "ZDLROUTSTANDING_COPY" had to be terminated because it
 has
 come across a statement that unfortunately cannot be executed.
Error analysis
 An exception occurred that is explained in detail below.
 The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
 not caught in
 procedure "PDF" "(FORM)", nor was it propagated by a RAISING clause.
 Since the caller of the procedure could not have anticipated that the
 exception would occur, the current program is terminated.
 The reason for the exception is:
 In the function "/1BCDWB/SF00000080", the STRUCTURE parameter "IT_WORKS_SF" is
 typed in such a way
 that only actual parameters are allowed, which are compatible in Unicode
 with respect to the fragment view. However, the specified actual
 parameter "SFTWORKS" has an incompatible fragment view.
Missing RAISING Clause in Interface
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 876
 Module type (FORM)
 Module Name PDF
Trigger Location of Exception
 Program ZDLROUTSTANDING_COPY
 Include ZDLROUTSTANDING_COPY
 Row 894
 Module type (FORM)
 Module Name PDF
Source Code Extract
Line SourceCde
864 ** i_logo = 'ENJOYSAP_LOGO'
865 * IT_LIST_COMMENTARY = I_LIST_COMMENTS1.
866
867 ENDFORM. "alv_top_of_page1
868 *&---------------------------------------------------------------------*
869 *& Form PDF
870 *&---------------------------------------------------------------------*
871 * text
872 *----------------------------------------------------------------------*
873 * --> p1 text
874 * <-- p2 text
875 *----------------------------------------------------------------------*
876 FORM pdf .
877
878 * *** Smartforms & PDF ***
879
880 ssfctrlop-no_dialog = 'X'.
881 ssfctrlop-preview = 'X'.
882 ssfctrlop-getotf = 'X'.
883 ssfcompop-tddest = 'ERP7'.
884 DATA : mcheck LIKE sy-subrc.
885 CLEAR : fm_name.
886
887 "Get Function module name for given smartform
888 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
889 EXPORTING
890 formname = 'ZSFDLOS1'
891 IMPORTING
892 fm_name = fm_name.
893
>>>> CALL FUNCTION fm_name
895 EXPORTING
896 control_parameters = ssfctrlop
897 output_options = ssfcompop
898 mrefno = mrefno
899 * P_TITLE = MTITLE
900 IMPORTING
901 document_output_info = st_document_output_info
902 job_output_info = st_job_output_info " IT_OTF_DATA
903 job_output_options = st_job_output_options
904 TABLES
905 it_works_sf = sftworks
906 EXCEPTIONS
907 formatting_error = 1
908 internal_error = 2
909 send_error = 3
910 user_canceled = 4
911 OTHERS = 5.
912
913 IF sy-subrc NE 0.
Advance Thanks

Error while calling stored procedure from Java

Hi Guys,
How are you everybody? I hope everything is goin fine on your side. I have one issue in PL/SQL while calling below stored procedures from Java.
Problem Description: We have a stored procedure PROCEDURE BULK_INSERTS (
V_SESSION_ID_TAB IN T_SESSION_ID_TAB_TYPE,
V_SERVICE_TYPE_TAB IN T_SERVICE_TYPE_TAB_TYPE,
V_SERVICE_LOCATION_TAB IN T_SERVICE_LOCATION_TAB_TYPE,
V_SERVICE_CALL_NAME_TAB IN T_SERVICE_CALL_NAME_TAB_TYPE,
V_SERVICE_CALL_START_TIME_TAB IN T_SERVICE_CALL_ST_TAB_TYPE,
V_SERVICE_CALL_END_TIME_TAB IN T_SERVICE_CALL_ET_TAB_TYPE,
V_SERVICE_CALL_DURATION_TAB IN T_SERVICE_CALL_DUR_TAB_TYPE,
V_STATUS_TAB IN T_STATUS_TAB_TYPE,
V_NOTES_TAB IN T_NOTES_TAB_TYPE
) and we are getting ora errors while calling this stored procedure from java.
All tab types are declared locally, at package level.
Here is error which occur while calling this sp:
{call BULK_PKG.BULK_INSERTS(?,?,?,?,?,?,?,?,?)}
And the parameter types we are using are:
SESSION_ID - NUM_TAB_TYPE
SERVICE_TYPE - VAR_TAB_TYPE
SERVICE_LOCATION - VAR_TAB_TYPE
SERVICE_CALL_NAME - VAR_TAB_TYPE
SERVICE_CALL_START_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_END_TIME - DATE_TIME_TAB_TYPE
SERVICE_CALL_DURATION - NUM_TAB_TYPE
STATUS - VAR_TAB_TYPE
NOTES - VAR_TAB_TYPE
And the Exception stack trace is:
ERROR (com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServi
ceCallDAO.java:143)@ExecuteThread: '252' for queue: 'weblogic.kernel.Default') {Error attempting to save collected ESC data}
java.sql.SQLException: ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PLS-00306: wrong number or types of arguments in call to 'BULK_INSERTS'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:112)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:173)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:191)
at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:944)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1222)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3381)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3482)
at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:3856)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1373)
at weblogic.jdbc.wrapper.PreparedStatement.execute(PreparedStatement.java:98)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.doBulkInsert(ExternalServiceCallDAO.java:220)
at com.att.retail.r2d2.persistence.dao.ExternalServiceCallDAO.saveExternalServiceCallInfo(ExternalServiceCallDAO.java:138)
Please help my guys out of this. I will really appreciate all suggestions and advices.
Thank you everybody.

I am trying to pass parameter to test my procedure but it is giving this error : ORA-06531: Reference to uninitialized collection
ORA-06512: at line 12
Here is example for my test procedure:
declare
v_session_id_tab SESSION_ID_TAB_TYPE;
v_service_type_tab SERVICE_TYPE_TAB_TYPE ;
v_service_location_tab SERVICE_LOCATION_TAB_TYPE ;
v_service_call_name_tab SERVICE_CALL_NAME_TAB_TYPE;
v_service_call_start_time_tab SERVICE_CALL_ST_TAB_TYPE;
v_service_call_end_time_tab SERVICE_CALL_ET_TAB_TYPE;
v_service_call_duration_tab SERVICE_CALL_DUR_TAB_TYPE;
v_status_tab STATUS_TAB_TYPE;
v_notes_tab NOTES_TAB_TYPE;
begin
v_session_id_tab(1) := 1;
v_service_type_tab(1) := 'db';
v_service_location_tab(1) := 'local';
v_service_call_name_tab(1) := 'Name of call';
v_service_call_start_time_tab(1) := SYSDATE;
v_service_call_end_time_tab(1) := SYSDATE;
v_service_call_duration_tab(1) := 100;
v_status_tab(1) := 'Z';
v_notes_tab(1) := 'NOTES';
BULK_INSERTS (v_session_id_tab,v_service_type_tab, v_service_location_tab,v_service_call_name_tab,v_service_call_start_time_tab,v_service_call_end_time_tab,
v_service_call_duration_tab, v_status_tab, v_notes_tab);
end;
I declare all types at schema level.
Please give your comments.
Thank you

Error while calling the EAI Viewer

Dear all,
I am working on Document Management System ECC 6.00
I am able to upload a PDF document in to the system, but when i save it and try to call the document back it is giving me the folllowing error."Error while calling the EAI Viewer" But when i try to open the same in the next PC it is opening. the work station application which i have defined is EAIWeb.webviewer2D.1 %SAP-CONTROL% for the application .pdf.
Kindly suggest what will be the problem as it is not opening in my PC but opening in an different PC with the same user name.
Kindly suggest.

Hi Kishuz ,
ECL Viewer comes with SAP
It is Engineering client viewer, which works for files like *.jt(jupiter technology), *.pdf(acrobat), *.dwg(autocad), *.step, *.iges
with ECL viewer you can view files like dwg without having Autocad Installed on your machine.
Alos it gives redlining feature...
thus layers help in indicating the modifications needed or commenting on the drawings...
Now the procedure for installation,
1. Install the latest SUN JAVA version. The path could be c:\program files\java\
2. While installing SAP GUI, ensure that the ECL component is not selected from R/3 Add On.
4. Install ECL Viewer 5.1.2 on local machine.
5. Ensure the path is as follows :(C:\Program Files\Common Files\SAP Shared\System or C:\Program Files\Common Files\SAP Shared\System\Java )
6. Ensure that the following files are in the c:\program files\java\1.5.0_08\lib\ext
folder:
- VisWebS.jar,
- VisWeb.jar,
- eaisupport.jar,
- eaisupportS.jar
- version.ini
- vctk.ini
In case, please copy the mentioned files from <ECL Install DIR>\java.
(C:\Program Files\Common Files\SAP Shared\System or
C:\Program Files\Common Files\SAP Shared\System\Java )
Reward points if useful...
regards
Niranjan

Internal Error occurred while calling the ProcessDPCommands API

We have installed Business Objects XI with MySQL. We are getting following error when we click on view query on the WEBI Reports
" Internal Error occurred while calling the ProcessDPCommands API Error WIS 30270".
When we change the CMS database to ORACLE everything works fine it looks like some issues when CMS database is MYSQL
Please hep to fix this problem
Installation is on Solaris 10
Edited by: AshishDatar on Nov 6, 2009 3:00 PM
Installation is on Solaris 10

did you check whether universe connection is pointing to the correct db?The following url might be helpful:
[http://www.forumtopics.com/busobj/viewtopic.php?t=52355&view=previous]

Error while calling the PDF in BSP pages in ECC6.0: Question BSP Gurus

Hi BSP experts,
Any Experts have solutions for below.
We recently moved BSP pages into ECC 6.0 .Iam getting the error in BSP page while calling the PDF.
The scenario is like this: The PDF is getting called the via URL:
The code is like this
CALL FUNCTION 'GUID_CREATE'
 IMPORTING
 ev_guid_32 = guid.
CONCATENATE runtime->application_url '/' guid '.pdf' INTO URL.
This URL is called in the front end LAYOUT.
<iframe src="<%= URL %>" width="100%" height="600px">
</iframe>

you missed one question of mine Do you create the PDF after creating the GUID ?
try giving a fixed URL just to test.
Aman

While executing the Procedure Getting Error

Hi I am New to ODI.
I create one new Procedure just to delete the Target table.
delete from <%=snpRef.getTable("L","T_CUSTOMER","D")%>. T_Customer is my target table.Technology:Oracle(Both Source and Target)
I selected the correct Context ,Schema and Technology.
While executing the procedure i am getting following error
java.lang.Exception: Internal error: object ConnectConnection
ColConnectId:null
ColContextCode:DEV
ColConName:null
ColIndCommit:null
ColIsolLevel:null
ColLschemaName:null
ColPlanComp:null
ColTechIntName:null
DefConnectId:null
DefContextCode:DEV
DefConName:null
DefIndCommit:null
DefIsolLevel:null
DefLschemaName:FCS
DefPlanComp:null
DefTechIntName:ORACLE
ExeChannel:J
IndErr:1
IndLogMethod:null
IndLogNb:null
LogLevDet:3
Nno:1
OrdTrt:0
ScenTaskNo:1
SessNo:61001
TaskName1:Procedure
TaskName2:Delete
TaskName3:Delete
TaskType:S
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execSrcOrders(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
 at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
 at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
 at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
 at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
 at com.sunopsis.dwg.cmd.e.i(e.java)
 at com.sunopsis.dwg.cmd.g.y(g.java)
 at com.sunopsis.dwg.cmd.e.run(e.java)
 at java.lang.Thread.run(Unknown Source)
Thanks in advance.

i Used the below syntax and checked its working fine.
delete from <%=snpRef.getObjectName("L","T_CUSTOMER","D")%>

How to get the own schema data while calling the other schema's Procedure

Hello Experts,
I'm Sanjit, new to OTN forum.
I'm using Oracle 10g 10.1.0.2.0 database. Another user Sush has created one procedure proc_1 like
create or replace procedure proc_1
as
v_total number;
begin
select sum(amt) into v_total from trans_master where dot
between add_months(sysdate,-3) and sysdate;
dbms_output.put_line('last three months total transactions is: '||v_total);
end proc_1;
He has the Trans_master table and having 280 records and I have the same Trans_master table with 430 records
inserted in last 3 months. He has granted execute privileges on the procedure Proc_1 to me. When I call the procedure
I cannot call it directly like my own schema procedures: Exec Proc1;
I am calling like : Exec Sush.Proc1 to get the result. My issue is: when the procedure is called,
it is accessing the data from the Sush schema Trans_master table with 280 records total, but I want
the procedure to get the total amount of transaction of 430 records from my own Trans_master table.
Please resolve my issue which would be a great help. And is there any way to call the procedure of other schema
by not attaching the owner name of the object with it?
Thanks
Sanjit

Pleast take a look at "Definer's rights and invoker's rights" in the following article:
http://docs.oracle.com/cd/E11882_01/timesten.112/e21639/accesscntl.htm#BABDDCHC
I guess you need to define a stored procedure with "invoker's rights".
If this is what you are looking for will have to define it in the stored procedure that you are going to call.
The syntax is as follows:
create or replace procedure <yourprocedure> authid current_user ...
...or (the following is the default, you don't have to use the "authid definer" keywords):
create or replace procedure <yourprocedure> authid definer ...
...hm

How to pass PARAMETERS to FORMS while calling them through URL

Hi,
I am working on integrating EBS with OBIEE as per the doc id 552735.1(metalink2)
In the Document, Oracle had given an example for genating the URL in OBIEE as follows,
SELECT
HEADER_ID,
fnd_run_function.get_run_function_url(
CAST(fnd_function.get_function_id('ISC_ORDINF_DETAILS_PMV') AS NUMBER),
CAST( VALUEOF(NQ_SESSION.OLTP_EBS_RESP_APPL_ID) AS NUMBER),
CAST( VALUEOF(NQ_SESSION.OLTP_EBS_RESP_ID) AS NUMBER),
CAST( VALUEOF(NQ_SESSION.OLTP_EBS_SEC_GROUP_ID) AS NUMBER),
'HeaderId='||HEADER_ID||'&pFunctionName=ISC_ORDINF_DETAILS_PMV&pMode=NO
&pageFunctionName=ISC_ORDINF_DETAILS_PMV',
NULL) as ORDER_HEADER_ACTION_LINK_URL
FROM OE_ORDER_HEADERS_ALL
But this one navigates to the JSP page of sales orders. Its working fine,
h3. Problem :_
If i want to navigate to Oracle forms(say Sales Orders),
i'm able to navigate, by giving the 1st param as '5522'(Sales order Form ID(ONT_OEXOEORD)) and 5th parameter as NULL.
The 5th parameter is used to navigate to a particular record.
But i dono how to pass the parameters to this particular Sales Order Form..!
(like here they hav passed HEADER_ID in a particular format)
{I guess, this might not be understood totally with this given data here, but i don want to make this post too big.}
CAN ANYONE PLEASE TELL ME, HOW TO KNOW THE FORMAT OF THE "PARAMETERS" TO PASS(WHILE GENERATING URL)_WHILE CALLING AN ORACLE FORM.._
Thanks in Advance..!!

Hi,
In addition to the above...
if i give the 5th parameter as, 'HEADER_ID=||'header_id { in runtime it'll be converted as 'HEADER_ID=5432..}
I'm not getting any error, getting a fresh Sales order page..!! { The given Header ID is ignored }
else if i give something like 'HEADER_ID=||'header_id||'&FunctionName=ONT_OEXOEORD...' { lets say }
its throwing the following errors..
FRM-47023: No such parameter named G_QUERY_FIND exists in form OEXOEORD.
FRM-40105: Unable to resolve reference to item PARAMETER.G_QUERY_FIND
FRM-47023: No such parameter named ORDER_NUMBER exists in form OEXOEORD.
and then it shows up the Navigator.
Requirement :_
How to pass parameter to a form while calling them through URL.
Thank you,

Problem while calling the FM FP_JOB_OPEN

Hi All,
I have a scenario where i need to attach multiple Forms(Adobe) to a work flow container.
While calling the FM 'FP_JOB_OPEN', i am passing the required parameters as below
wl_outputparams-nodialog = 'X'.
wl_outputparams-connection = 'ADS'.
wl_outputparams-dest = 'LP01'.
wl_outputparams-getpdf = 'X'.
the problem is that i get a Print preview pop-up even though i pass Nodialog = 'X', and more over after calling the actual Form function module the resultant parameter 'fpformoutput-pdf' is only filling up only after i process the print preview dialog and see the preview. other wise the field 'fpformoutput-pdf' is blank.
as i need to do this work in back ground(for work flow background step) i do not want the print preview pop-up window.
can some one help me in this regard.
PS. For multiple forms i tried calling the form functions modules in between every FP_JOB_OPEN n FP_JOB_CLOSE
as well as a single FP_JOB_OPEN and calling the multiple form function modules and FP_JOB_CLOSE.
thanks in anticipation .
Srinivas

@koolspy
Yes, i did specify the settings in the o/p options.
in addition to this, after debugging i could able to see some issue when calling form name via FM 'FP_FUNCTION_MODULE_NAME', in this FM it is appending '_IN' to the generated FM name and trying to check for existence check, obviously there wont be any FM as it is appending '_IN' to the generated FM.
but when calling the generate FM after FP_JOB_OPEN it is throwing sy-subrc = 1, which is Usage error.
Why is it behaving weirdly, is there any thing i am missing while calling the Form?
please help as this is on high priority
thanks
srinivas

Error message while opening a project: "an error was encountered while loading the image"

We've run into a new error message here today:
an error was encountered while loading the image
It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
It's on a windows 7-machine.
Anyone encountered it and knows what it means?
is the project lost forever?

Hi there
Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
Best of luck to you in sorting things. You should also consider filing a Bug Report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Error in Forms while calling The procedure

Similar Messages

Maybe you are looking for