Error in Graphic Tab

Dear All,
Can any one help me in resolving the following two problems.
1. In the transaction SOLAR01 when I click the graphic tap I am getting the error
“ The website cannot be found. The IP address for the website you requested could not be found”.
2. when I enter the transaction SOLMAN_PROJECT on the lefthand side I am getting the list of project. When I click on the project I am getting the road map assigned to that project. But when I click on the scenario or process node under the project, I am getting the error “The website cannot be found. The IP address for the website you requested could not be found”.
Warm Regards
Saravanan

Hi Saravanan,
Make sure you use fully qualified hostnames!
In one of my systems we kept keeping a logon/login popup when hitting the Graphic tabs. The note below solves this.
Note 637995 - Problems with displaying the Component View / Graphic
<b>This can be done as follows:</b>
<i>Create a user (of type SYSTEM) with no authorizations.
Call transaction SICF.
Expand the following items: default_host->sap->bc->bsp->sap.
Double-click on the item 'component_view'.
In the following popup, in the field 'Anonymous Logon Data' fill in the
corresponding data for the new user (Client, user, password). Check
'Logon data Required'.
Save the changements and activate the Service (see above).</i>
<b>If the graphic is still not displayed,</b> <i>please call transaction SE80. Choose 'BSP Application' within the drop down listbox on the left hand side. Enter 'COMPONENT_VIEW' in the field underneath. Double-click the folder 'COMPONENT_VIEW' in the tree underneath. Press the button 'Activate'. Double-click the folder COMPONENT_VIEW->Pages with Flow Logic->cv_bpr.asp and press the button 'Activate'.
Moreover, Business Server Pages require a fully qualified hostname. Please refer to note 434918 in order to make sure that the host name of your system is fully qualified.</i>
I only executed the bottom part, because in the good system the first part was not implemented.
What IP adres is you server pointing to? Does it exsist at all?
Have a great day,
Sjoerd Lubbers

Similar Messages

  • In the Graphic Tab and Work Center Error The Page Cannot be displayed

    Hi In the Solar01 and also in the Solman_Workcenter I am getting error  "The Page Cannot be displayed"
    In the Solar01 - I have Business Processes save and  under the Graphic Tab when I am clicking on the correct Business Scenario Node.  I am expected Graph to display.  But Showing error
    In the Solman_Workcenter -  I set up the added the Starndard Role Busing Solaman Basic Role and + implementation role.  When i go under Solman_workcenter transaction I am getting the same prolbem i.e "The Page Cannot be displayed"
    Any Idea friends.
    Appreciate your help
    -Santh

    Hi,
    Refer note 834832. Check activation of services in transaction SICF and the patch level of your SAP GUI.
    Thanks.
    Kathir

  • Graphics tab in REBDBU: Internal error when implementing extension

    Hello,
    Seek your kind help please.
    I have entered in the building master data using REBDBE. We have a tab called Graphics. The pictures etc of the building are uploaded using a software called Korasoft. When i am clicking on the Graphics tab, it is entering the screen but immediately afterwards flashing the following message, "Internal error when implementing extension".
    Doing a F1 on the error message shows the foll details:
    "Diagnosis
    An internal error occurred during the implementation of a customer-specific enhancement. A CHANGE-API module was called with an object reference (parameter IO_OBJECT) that was not instantiated in the required activity for changing (02). The API modules are function modules and begin with API_RE_.
    Procedure
    Within the BAdI implementation, transfer the parameter IO_OBJECT from the BAdI method directly to the API module. Make sure that the transferred instance is allowed to be changed."
    I found that the SAP note 1139014 causes this error message to be generated. Note 1139014 forms a part of support pack level 13 (release 600). Recently we have upgraded our systems from support pack level 8 to support pack level 13. Naturally even this note got implemented at that time.
    But now this note is causing this error message and so I will be grateful if someone can please tell me how to rectify the error.
    Regards,
    Suvarghya Dutta
    Edited by: Suvarghya Dutta on Feb 11, 2009 5:30 PM

    Hi Fabio,
    I would kindly ask you appy the SAP note [1521903|https://service.sap.com/sap/support/notes/1521903] and proceed as described in the note to resolve the issue.
    Hope this information is helpful for you.
    Regards, Franz

  • In Solar01 tcode Graphics tab graphics are not dispaying

    Hi All,
    I am having an issue in SOLMAN4.0:
    In solar01 tcode i.e Business Blueprint when i am going to Graphics tab and clicking on the Goods receipt & Inventory Magt or any other its giving "Page cannot be diplayed .....cannot find server or DNS Error Internet Explorer"
    Actually it used to give the icm/host_name_full is not set correctly. When I added this parameter in RZ10 the error gone and dispalying the above error...
    Kindly guide me to make make necessary changes so that my issue is solved.
    NOTE:
    1.Local availibility of Internet Explorer is haigher than 5.5
    2.ActiveX controls are active in your browser
    the above 2 are done on my server.
    waiting for your response
    thanks in advance

    Hi All,
    Thanks for replies.
    It got solved by giving icm/host_name_full profile parameter correctly. previously it was given as "saphost.sap.com" then i given as "saphost.domain.sap.com"
    thanks

  • In Smartform i am getting a Error Message Graphic cannot be displayed

    Hi All,
               I am trying to display a image in smartform . In the Code i have created a BDC for SE78 for Image upload and when the Image is Upload and when i try to execute the Smartform i am getting a Error Message : Graphic cannot be displayed
    I am trying to load a BMP image in  the form.
    Can anyone help me out .
    Thanks in Advance .
    Regards
    Shankar

    Hi,
    There are two possibilies of issue here.
    1. The BDC is not correct so the image is not uploaded.
    2. Graphic parameter is not properly specified in smartform.
    Please check issue no 1 first. If you confirm that image already in SAP, then you can go to issue no 2.
    Regards,
    Teddy Kurniawan

  • Get error msg. "Configuration error"  AGP Graphics Card

    I recently purchased a MacBook Pro 17". I migrated my software from my old computer, but when I tried to open Final Cut Express HD, I got an error message saying Configuration Error "AGP Graphics Card." When I went to the support site, it indicated that I needed to download an update. I did that, but the install indicated that I was already updated and current. What can I do?

    You are in the Final Cut Pro forum and find more focused help over in the FCExpress forum.
    That said, usually these messages arise when you are installing an older, non-intel version of the software on an intel machine.
    You can not update it, you need to purchase the upgrade to the current Universal Binary (aka intel ready) version of the software for it to run properly.
    Good luck,
    x

  • Error viewing variables tab after running edit UI

    Hi,
    I have a problem that seems to be somewhat like this:
    http://forums.ni.com/t5/NI-TestStand/Error-viewing-variables-tab-in-Runtime-Operator-Interface/m-p/1...
    The VI I am trying to run is an edit substep of a step type. LabVIEW checks to see if the "Step.Setup.ReadMeasName" property exists, populates a listbox with it if it does. Another listbox with all the available measurement names also appears on the UI. The user has an Add and Remove button to remove measurements from the "ReadMeas" listbox or add them to it from the "MeasNames" listbox. Multiple names can be added/removed at once depending on whats selected when the buttons are pressed. Once "Done" is clicked the VI writes the"ItemNames" property of the "ReadMeas" listbox to "Step.Setup.ReadMeasName", using a Set Property Value node which is passed the TestStand Sequence Context. If the property doesn't exist it creates it.
    The only time I have any problem is when I try to remove items from the property after it is already initialized (i.e. not empty). In other words, if I run the VI from teststand, put several measurement names into "ReadMeas" click done, run the VI again (the names already added appear in the box when the UI comes up, LabVIEW reads "Step.Setup.ReadMeasName" ), and then remove some of the names. IF I had "ThisContext.Step.Setup.ReadMeasNames" opened in the step "Variables" tab when trying to remove the names this message appears in the Variables tab: "One or more errors have occurred. Please Save your work and restart the application." If I make sure not to have "ThisContext" expaded in the variables tab, but check the property before and after removing names from the list it does work properly and there is no error.
    This isn't a big deal becuase I doubt the end-user will be checking to see that the property actually got populated, but I still would like to fix the bug if possible. I've installed the patch for TestStand 2010, and the .Net framwork 4.0. Anyone have any idea what could be going on here?
    Thanks,
    -Josh
    Solved!
    Go to Solution.

    Josh -
    It looks like you're running into a Known Issue 193751, which is documented in the TestStand 2010 and 2010 SP1 Known Issues List. This is an issue that we intend to fix in a future version of TestStand.
    I hope this helps and am sorry for any inconvenience this issue may be causing you.
    Manooch H.
    National Instruments

  • Error in Analyse Tab

    Hi
    I have received following error after analyse tab from db13
    SAPDBA: Error - in analyzing index SAPR3.DSYAD~0
            of table DSYAD!
    30.12.06 09:50     ORA-08100: index is not valid - see trace file for
                       diagnostics
    Please suggest a solution.
    Regards
    Pankaj

    Pankaj
    This Error is very strange error, Have a look on trace file which is generated at user_dump_dest and alert<sid>.log file.
    Reasons may be index might be corrupted or invalidated.Or may be due to block corruption.And there are some bugs on specific platforms for this error.
    Try to drop and recreate index and analyze or better contact customer support with trace file.
    Regards
    Vinod

  • Error formatting Cross-Tab table

    Hello!
    My CR2008 reports include many cross-tab tables and till now, everything went smoothly.
    ...till I got the message "Error formatting Cross-Tab table" while viewing the print preview.
    Technically the error comes up while clicking one of the groups itemized on the left.
    The database hasn't changed. Besides it happened with two different reports associated with two different data bases.
    Any idea ?
    Any help would be appreciated as I've been lost for a while.
    Thib'

    Before I received your answer (thanks a million by the way), I have been installing/un-installing subreports in the main report 'til the 'Error formatting Cross-Tab table' stops.
    The Error stopped occurring when I added a small Group Footer in the subreport : apparently the Error had begun when I had put it to a zero-height.
    Having said that, an hour later and many changes here and there, I have just put a zero-height again and no Error anymore...
    > Check in the main report design tab to see if the width of the subreport fits within the page of the main report.
    > If it doesn't try shrinking the subreport to fit.
    Within 'an hour later and many changes here and there', I did the opposite : I widened a subreport which did not fit in the main report. And the Error isn't raised anymore.
    > What happens if you drill into the subreport?
    You mean if I double-click the subreport to edit it ?
    If that is your question, no Error has ever been raised in the subreport : always in the Preview tab of the Main Report.
    Sorry for describing such an irrational behavior.
    I will categorize my question as answered but if you have any idea, I'd be delighted : I feel like this can happen again and I'd be less under stress to know what detail/ 'parameter' makes CR raise this Error. But your hint about the subreport fitting or not within the main report might be a clue.
    Thank you again
    Thib'

  • Receiving an 'Error formatting cross-tab object' error when paging through preview

    I have a report with two subreports in the group footer.  One of the subreports contains a cross-tab report.  When I preview the report as a whole, occasionally I get an error formatting cross-tab object and then no more pages of the report are displayed.  If instead I choose to export the report to pdf, Crystal Reports crashes.  Any ideas on what might be causing these problems?

    Actually, you can search for them by entering the KBA number in the search box in the top right  corner of this web page. KBA 1214209 comes up fine. KBA 1212875 does not, but it's not really applicable.
    While we are at the search box, see if a search term like 'crystal cross tab' (or something like that) bring up other KBAs.
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
      Follow us on Twitter

  • GRAPHIC TAB not working in t-code SOLAR01

    Hi All,
    Am trying to a create a notification in transaction SOLAR01. Am trying to access the GRAPHIC tab. But the page wont come up. Is there are settings that i need to be changing or are there any need of any additional authorization required?
    Please suggest.
    Regards,
    Imran

    Hi Imran,
    Did you check with your BASIS team as to whether latest ActiveX controls are implemented and allowed for ?
    Also, please ask them to check for settings to be enabled in Transaction SICF.
    Last but not least, could you please ensure that latest SAP GUI is in place.
    One of these should most likely fix your problem.
    Cheers,
    Srini

  • Portal error message "Graphic rendering problem"

    We just built a new portal system on Window server.  A user login  and get this error message "Graphic rendering problem".  Would someone know what it is ?  Thanks !

    Check that the IGS is running properly...
    Also check SAP Note: 704604
    Regards
    Juan

  • SOLAR01-Graphic Tab

    Hi Team,
    I am working in SOLAR01 "Graphic" tab. When i try to connect two business process steps, i am getting the option Sysnchronously & Asychronously. What does it mean? How does it impacts?
    Need your guidance on this
    Thanks
    PSK

    Hi,
    Between the business process steps this means:
    Asynchronously - the sender or receiver doesn't expect any confirmation but manual response can be sent.
    Synchronously - both transactions communication together, data transfer is together and sender always expects an automatic reply.
    Base it on your knowledge of the process and business transactions.
    Regards,
    -Rohan

  • Error Msg. "Configuration Error AGP Graphics Card"

    I recently purchased a MacBook Pro 17". I migrated my software from my old computer, but when I tried to open Final Cut Express HD, I got an error message saying Configuration Error "AGP Graphics Card." I reinstalled my original disk but got the same error message. When I went to the support site, it indicated for that error message that I needed to download an update. I did that, but the install indicated that I was already updated and current. What can I do?

    Try hitting the esc key whenever you get the message.
    You are probably using FCE 3.0 which was not designed to run on Intel Macs.

  • Error: Component graphic or script edited

    Hi There,
    I'm trying to use Fireworks for wireframe mockups but am having a hard time using images in the document library. At this stage I'm just trying to use the "Image Placeholder" that ships with CS5.
    When you scale the image it won't really snap to guides or the grid (or other objects). I think this is because the little handles are outside the box maybe?
    Thinking this was the case, I opened the "image Placeholder" from the library and adjusted the nine slice guides so they were pixel perfect on the outside of the box.
    But now when I try to add it to the library I get an error "Component graphic or script edited".
    Not sure what I'm doing wrong - I just want things to snap to pixels and line up with objects, guides and the grid of created.
    Any help would be much appreciated.
    Cheers
    Ben

    After a bit more experimentation, it would appear that if you draw an object it is pixel perfect and snaps accurately.
    But if you save the object as a symbol to reuse (I made my own image placeholder for example) then the little blue points are sometimes placed outside the edges which makes it impossible to use snapping with symbols - as FW snaps to the blue points and not the edges of the object.
    Is anyone else experiencing this? Kind of renders symbols useless if you require accuracy - hope I'm wrong though.
    Any help would be much appreciated.
    Cheers
    ben

Maybe you are looking for