Error in hierarchies

hi experts i am getting error for hierarchies please give me inputs;
1 .infopacjage has failed , when iam checking it is not showing any error message(no job log found). please advise me in which way i correct it.
2.
i found error in processchain for master data:
error message-> Job terminated in source system --> Request set to red
for this we manually delete request and loaded dat from psa to dso but i have to find routecause.
job log: job long text : Job started
Step 001 started (program SBIE0001, variant &0000000287278, user
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel
DATASOURCE = 0CO_OM_NWA_1
RLOGSYS = P37-370
REQUNR = REQU_4K7UBN31V78ISXUTKZTD9C41M
UPDMODE = F
LANGUAGES = *
Current Values for Selected Profile Parameters
abap/heap_area_nondia......... 2000000000
abap/heap_area_total.......... 2000000000
abap/heaplimit................ 40000000
zcsa/installed_languages...... DEA1HIFPRS
zcsa/system_language.......... ED
ztta/max_memreq_MB............ 128
ztta/roll_area................ 16773120
ztta/roll_extension........... 2000000000
Internal session terminated with a runtime error (see ST22)
Job cancelled
when isearched in sm37(inr/w) job was calcelled.
it leaded to short dump:in st22:
Short text
No more storage space available for extending an internal table.
What happened?
You attempted to extend an internal table, but the required space was
not available.
The internal table "\FUNCTION=PSBW_SELECT_ACTIVITY\DATA=LT_NWA_SELECT_N" could
not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 270
Number of rows: 2047696
Allocated rows: 2047696
Newly requested rows: 32 (in 1 blocks)
error source line cide: APPEND W_PSBW_ACTY_OBJNR TO BUFFER_NWA_OBJNR.
but when i searched in BD87 (R/3):
IDocs in outbound processing
->Error passing data to port (red)
->INVOIC
-> EA(084) : Error while writing IDoc to file
IDoc in inbound processing
->Application document not posted (red)
F5(263) : The difference is too large for clearing
ZZ(432) : SMF Header data not found for GSL No. &
ZZ(433) : SMF Site data not found for GSL No. &
ZZ(451) : Postal code & is invalid
SO MY DOUBT IS IF IT DUE TO IDOC STRUCKED INR/3 , WHEN WE LOAD DATA MANUALLY HOW IT LOADED.
SO EXPERTS PLEASE GIVE SOLUTION WHY IT HAPPENED AND WHAT ARE THE REASONS (BECAUSE I HAVE TO FIND ROUTE CAUSE AND EXPLAIN TO MY TEAMLEAD)
Thanks,
Bharati.

this might be due to large no of records coming at one time and therefore there is storage issue.You can either change selection at Infopackage level so that less no of rec come at one time & that time there might be some other loads going on as well in system & manually when you run that time data load might be less in no so u didnt faced any issue !! Also.may be you need to do program tuning
check transaction DB02 for checking storage space available..iF ITS full pls contct BASIS TEAM.
thanks
nilesh

Similar Messages

Error getting hierarchies

Hello Experts,
We have Business Objects Edge 3.1, SP2. When I try to create Universe on Bex Query, I am getting this error: Error getting hierarchies for dimension 0PROFIT_CTR (Cube ZI_N_PA01/REP_20100611144403): Unknown error
I was able to create crystal report on the same bex query, Can anybody tell me why I am getting this error? Do I need to apply the Fix Pack 2.5 or 2.7 for this kind of issues?
Thanks,
ravi

We have applied this notes because we had performance issue, Does it related to Hier Issue?
0001310048 MDX: Optimized processing of the IIF statement
0001333559 MDX: Performance of DESCENDANTS (..., LEAVES) function
0001338760 MDX: Performance of function EXCEPT(<d>.Members, <d>.[All])
0001348567 MDX: Duplicate tuple for Crossjoin() and Descendants()
0001349701 MDX: Missing values for structures and calculated measures
0001350936 MDX: API for compressed data access based on basXML
0001368202 MDX optimization: Reading minimal set of key figures
0001378613 MDX: Efficient reading of root nodes
0001383354 MDX: Very long runtime too many KIDs read
0001383593 MDX: Improving the performance of some MDX functions
0001390371 MDX: Sorting is very slow
0001395307 MDX: Retrieving axis data takes an extremely long time
0001410242 MDX: Performance of LAG() and LEAD()functions
Thanks,
Ravi

BOBJ - BW "Error getting hierarchies for dimension... "

Im still whitout a solution for this problem, however we have found a difference between the queries that work and the queries that dont work. The difference is in the hierarchies type but we dont know what is the problem exactly.
Does anyone know if there is an specyfic type of hierarchie that we need to use???
Regards

Hi,
I wonder why you are not using the BEx / BICS connection ? (instead of the old OLAP .unv)
the process flow for generating a universe would include the following SE37 function modules:
BAPI_MDPROVIDER_GET_CATALOGS
BAPI_MDPROVIDER_GET_CUBES
BAPI_MDPROVIDER_GET_DIMENSIONS
BAPI_MDPROVIDER_GET_HIERARCHYS
You should test these in BW .
It may actually be an authorization issue - perhaps your logon doesn't have infoobject authorizations for 0Plant?
Regards,
Henry
p.s. a quick Note search suggests : 1565615 - Error when creating a Universe from BEx: "A runtime exception has occurred. (Error getting levels for hierarchy ( dimension : Unknown error)"
--> "Business Objects Personalization objects" R21K900693 transport has not been loaded properly in the BW system, transaction STMS shows this trasport not loaded.

Compiling error in Hierarchical Tree !!!!! Urgent attention!!!

I have made the Hierarchical Tree as described in the resuable demo help as is but when ever i try to compile the form i gets error on the navigator."anything!". I guess the forms are not able to find the navigator package. I have attached the navigator.pll. I think there is nothing mroe to attach to a form
Till now i have searched every documentation on the net and the files ships wiht DEV 6.0.5.2. But not ablet o find any thing regarding the installation of navigator package :( Is there any one can tell me how u remover the compiling error from the form which is dur to the navigator package!!!!
null

If you are using DEV 6.0.5.2 you should use the FTREE built-in package. Look under the Built-In package node. The Navigator.pll was a demo used in Forms4.5 before there was a hierarchial tree item type.
Thanks,
Candace Stover
Forms Product Management

BOE XI 3.1 SP3 Webi on SAP BW Query gives errors

Fri Sep 24 21:01:17.061 ThreadID<2844> SAPMODULE : RFC function call MDDataProviderBW.GetHierarchies returned E
Fri Sep 24 21:01:17.061 ThreadID<2844> SAPMODULE : Error info:
     Message Class               BRAINOLAPAPI
     Message number               12
     Message                    Unknown error when executing MDX
     Application log number
     Application log serial number     0
     Message 1
     Message 2
     Message 3
     Message 4
     Parameter Name
     Lines in parameter          0
     Field in parameter

Hi Ingo,
I'm Experiencing the same issue described here. My situation is the following. I have a webi report on top of an OLAP universe where the bex queries were running in BW 3.5. Later the client upgraded the system to BW 7.01 SP6 and when trying to re run the webi report it started to fail. I then activated to logging to see what the problem could be and found this error. It looks to me that a dimension is giving the error. Any tips to understand this log?
Thu Nov 25 13:05:47.703: 5564: SAPMODULE: STRUCTURE: Error info:
     Message Class               BRAINOLAPAPI
     Message number               12
     Message                    Error desconocido en la ejecución MDX
     Application log number
     Application log serial number     0
     Message 1
     Message 2
     Message 3
     Message 4
     Parameter Name
     Lines in parameter          0
     Field in parameter
     System                    B03CLNT222
Thu Nov 25 13:05:47.703: 5564: SAPMODULE: STRUCTURE: RFC function call MDDataProviderBW.GetHierarchies failed. Error desconocido en la ejecución MDX
Thu Nov 25 13:05:47.734: 5564: SAPMODULE: STRUCTURE: RFC function call MDDataProviderBW.GetHierarchies failed. Error desconocido en la ejecución MDX
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Created
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount raised to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount raised to 3
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount lowered to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount lowered to 1
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 343 (7D1A4370): Created
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 343 (7D1A4370): Refcount raised to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount raised to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 343 (7D1A4370): Refcount raised to 3
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount lowered to 1
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 343 (7D1A4370): Refcount lowered to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 343 (7D1A4370): Refcount lowered to 1
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 344 (7D1A68F0): Created
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 344 (7D1A68F0): Refcount raised to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount raised to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 343 (7D1A4370): Refcount raised to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 344 (7D1A68F0): Refcount raised to 3
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount lowered to 1
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 343 (7D1A4370): Refcount lowered to 1
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 344 (7D1A68F0): Refcount lowered to 2
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 344 (7D1A68F0): Refcount lowered to 1
Thu Nov 25 13:05:47.734: 5564: SAPMODULE: No Value: Error getting hierarchies for dimension (Cube ZDU_O06/QRY_VAR_PENDING): Error desconocido en la ejecución MDX
Thu Nov 25 13:05:47.734: 5564: MEMORY: StringMessageInsert: Instance 342 (7D1A43F0): Refcount lowered to 0
The BOE Platform is BOE XI 3.1 SP2 FP2.7
Any ideas of what could be?
Kind regards,
xtian
Edited by: xtianw on Nov 25, 2010 5:46 PM

Dynamically Importing Hierarchies from R3 to BW

Hi All,
In continuation to my earlier question today, I have read almost all the material available on Hierarchies now, but it specifies that I have to use a FLAT FILE in any case to load a Hierarchy from R3.
Well, If I get a view or table or custom costcenter manager hierarchy ready in R3 then how can I import it into BW dynamically without using a flat file. As maintaining it on daily basis will be difficult.
As test I have a Z* object with hierarchy enabled in BW,
I want to replicate the existing hierarchy from R3 into this one.How to do this with out Flat File or manually selecting the nodes.
Please suggest any inputs on this will be valuable.
Thanks
Sarah

Hi.
Please check the following notes which contain a rich information about this kind of error:
1026749 Hierarchies: Consistency check for duplicate nodes
1007842 RH 211 when you load hierarchy with no char value specified
Thanks,
Walter Oliveira.

RSRT: Getting this error when I click on u0093Performance Infou0094 tab for report

Hi,
I have two queries coming odd a particular cube. There were some performance issues so in RSRT, Properties, I checked the delta cache update box and the reports significantly improved their performance.
Later, for both reports, in RSRT, Performance Info fails to run and gives error:
Different hierarchies are used for characteristic 0DISTR_CHAN
Even reversing above change in Properties, still gives same error message when I try to go into the Performance Info tab.
Any help?
Thanks

Hi,
typically, when i click on the "Performance info.", it is supposed to have executed and provide some performance details on the query.
At this moment, the error message shows at the bottom of the screen and nothing else happens.
Thanks

SAP BW query to BOBJ Universe: The supplied XML is not valid.

Help!
The Business Objects Sever XI is giving us messages like the below, on some but not all BOBJ Universes based on SAP BW queries.
A database error occurred. The database error text is: The supplied XML is not valid. [various InfoObjects] [LEVEL01] (WIS 10901)
These queries were executing 1 working day, 3 calendar days ago. No transports to SAP BW or promotions to BOBJ were made.
Any ideas?
Thanks,
John Hawk
When we refresh the Universe, we get this mesdage
Error getting hierarchies for dimension 0INFOPROV (Cube FIGL_M10/FIGL_M10_Q001): Exception condition "HIERARCHY_NOT_FOUND" raised
Edited by: John Hawk on Jun 1, 2010 9:15 PM

Hi John,
I'm also getting same error 'Error getting hierarchies for dimension 0INFOPROV (Cube ZLE_M10/YBO_FREIGHT_ZLE_M10_UNIV_MPT1): Unknown error' when tried to create universe on top of query which is based on multi provider. Could you please send me copy of program ZZ_REPAIR_HIEDIR?
Thanks,
Milind

Error while loading hierarchies

Dear all
I am faicng the following errors while loading hierarchies from R/3
1.Error"Error in the hierarchial structure"
When i open the logs i can see the follwing analysis,but not able to understand
Analysis
The node with the technical name 0000104 appears more than once under the node with the ID 10400011. A node must be hung only once under its direct predecessor (parent). The nodes with the same technical name have the IDs 10400017 and 10400012.
When one of the nodes is an interval, this means that the other node is contained in this interval. When both nodes are intervals, this means that both interlap.
Possible solution
Remove the Duplicate Nodes
Can anyone explain this please
2.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Can anyone kindly help me out in these
Regards
Veena.

1.Error"Error in the hierarchial structure"
the hierarchy does have duplicate values. the possibility is that you are loading a set from R/3, where the system allows to have duplicate values in different nodes, but that doesnt hold true in the case of BI. so ask ur functional folks to nake the set unique and the load should go fine.
.Error: InfoObject ZH_LKSTOM is not available for Datasource ZH_LONKLA_HIER
I am trying to load the hierarchy for the Info object ZH_LONKLA
Not sure whats the relation between ZH_LKSTOM and ZH_LONKLA

Error while deleting Hierarchies through TCode - comm_hierarchy

Hi there,
We are trying to import the Product Mater data from SAp R/3 4.7 to mySAPCRM 4.0.
The CRM system already has product master data (hierarchies, categories and products) from old logical R/3 system. So We have directly deleted all the categories in the master table COMM_CATEGORY using TCOde SE14 (have not deleted the products prior to that).
Now if we try to delete a Hierarchy thru the TCODE COMM_HIERARCHY, it thows an error message "Hierarchy still conatins categories".
Any idea, how we could correct this.
Thanks,
Ramya.

Ramya, I do think we have a little problem here. First of all never delete any from the database, period. This causes in many (if not all) cases inconsistencies. First question I have, do you have a back-up from before you initiated this deletion? If so, please restore.
Second question in order to be able to upload this hierarchy information you must ensure the corresponding number ranges in the old R/3 system and the new R/3 system do not overlap. Only in this situation you can load the new hierarchy in the CRM environment.
If there is an overlap, create a separate number range in CRM starting where the number range in the old R/3 system ends. In the replicating object add a filter to only load the hierarchies that do match this newly created number range. This will at least enable you to partially load hierarchy info from the new SAP system.
Hope this helps, Tiest

Error: URI is not hierarchical while invoking external WS

I have a business process, wherein I am invoking an external Java WebService using Invoke->PartnerLink
During compilation, i am getting error : URI is not hierarchical
If I remove the above call, there is no compilation error.
I have checked all the paths and project name for errornous whitespaces which lead to the above error. I am using 10g.
What could be the reason of the error?

Update
I just started with a fresh instance of JDeveloper (unzipped the JDeveloper pack at another location). And now the problem is gone.
So I think there was some problem with my JDeveloper compiler.

Error while working with hierarchical profiler

Hi,
I am working with hierarchical profiler for the first time in SQL Developer 3.0.
When I open a procedure and click the Profile icon, I get the following error "Directory exists;check if /tmp exists on file system, and oracle has permissions to write there".
Any help on this is appreciated.
Edited by: 836760 on Feb 14, 2011 11:24 PM

Hi,
I am working with hierarchical profiler for the first time in SQL Developer 3.0.
When I open a procedure and click the Profile icon, I get the following error "Directory exists;check if /tmp exists on file system, and oracle has permissions to write there".
Any help on this is appreciated.
Edited by: 836760 on Feb 14, 2011 11:24 PM

Hierarchical Tree error - fighting for over a year

For over a year now, our Oracle forms have presented an elusive problem with Hierarchical Trees. First some core information:
We are running Developer 6i, patchset 8, on a Sun host and an Oracle 8i database. Our forms are deployed over the web on the
Oracle Application Server using J-Initiator 1.1.7.27.
Now, only on our Production platform, and only during busy times of the day, we randomly get the error "Invalid Query for Hierarchical
Tree" when one of our tree-based forms populates the tree. This error is sometimes followed by the infamous
FRM-92100 "connection has been terminated" error. This happens whether building the tree with a single Selec and Populate Treet,
or via a systematic series of Add Tree Node calls.
We have tried rebuilding the form logic to eliminate form corruption, (form corruption - happens if you open a large FMB in the
forms developer without first being connected to the database, manifests itself as random and odd form behaviour,
or FRM-92100 errors, Oracle product support denies it really happens), we have added debug code, we've even tried generating
the FMX on the Production platform as part of our deployment (normally we generate FMX files on our Integration platform
which mirrors Production).
We are not scheduled to upgrade for Forms 9i and the 9IAS for several more months, so upgrading isn't an immediate option for us.
Any and all ideas welcome.
Jeff Cline

Hi Nigel,
Two questions:
1. When the publisher sends the access permission to the subcriber by:
netStream.send("|RtmpSampleAccess", true, true)
, on the subscriber side, what event or function can handle the guaranteed receipt of the access permission? Currently it is possible to draw the incoming stream video upon receiving NetStream.Play.Star and waiting for 5 seconds or so:
public class MyWebcamSubscriber extends WebcamSubscriber {
override protected function layoutCameraStreams():void
// trying the event listener seems to work here.
_streamManager.addEventListener(NetStatusEvent.NET_STATUS, onNetStatus);
override protected function onNetStatus(e:NetStatusEvent):void
super.onNetStatus(e);
case "NetStream.Play.Start":
setTimeout(function():void {
// draw the video from the incoming stream here.
}, 5000);
The questions is, which event can let the subscriber know that it has the access permission to the video stream?
2. In WebcamPublisher, why is that the access permission is sent 3 times?
a. Once on receiving NetStream.Connect.Success with 0.5 second delay, as in below.
b. Once immediately upon receiving NetStream.Connect.Success, as in below.
protected function onNetStatus(p_evt:NetStatusEvent):void
if (p_evt.info.code=="NetStream.Connect.Success") {
setTimeout(sendSnapShotPermission, 500);
_stream.send("|RtmpSampleAccess", true, true);
protected function sendSnapShotPermission():void
_stream.send("|RtmpSampleAccess", true, true);
c. Once in onConnectionTypeChange() with 2 seconds delay:
protected function onConnectionTypeChange(p_evt:StreamEvent):void
if ( _streamManager.isP2P) {
_stream= new NetStream(_connectSession.sessionInternals.session_internal::connection as NetConnection,NetStream.DIRECT_CONNECTIONS);
setTimeout(sendSnapShotPermission, 2000);

Error with Parent-Child Hierarchies in BIEE11.1.1.5

Hi ,
I am using BIEE11.1.1.5, I have created a Logical Dimensions with Parent-Child Hierarchies,
In answer,I draged the Hierarchies named 'H5 Sales Rep', then view the results,
It has error,error message as follows:
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 22056] To use hierarchical functions, you need to associate a Closure Table with Logical Table Source 'LTS1 Sales Rep'. (HY000)
SQL Issued: SELECT 0 s_0, "Sample Sales"."Sales Rep"."Sales Rep Name" s_1, CASE WHEN ISLEAF("Sample Sales"."Sales Rep"."H5 Sales Rep") THEN 1 ELSE 0 END s_2, IDOF("Sample Sales"."Sales Rep"."H5 Sales Rep") s_3, PARENT("Sample Sales"."Sales Rep"."H5 Sales Rep") s_4 FROM "Sample Sales" WHERE ISROOT("Sample Sales"."Sales Rep"."H5 Sales Rep")
anyone know why???
Thank you!

Hi Leo,
Did you configure closure table? http://www.rittmanmead.com/2010/11/oracle-bi-ee-11g-parent-child-hierarchies-multiple-modeling-methods/
Also make sure to perform the hierarchy changes in offline mode.
Regards,
Dpka

Error "Members, tuples or sets must use the same hierarchies in the function" in MDX

the following MDX returns error: "Members, tuples or sets must use the same hierarchies in the function"
WITH
MEMBER [Measures].[Prev Year] AS
[Measures].[returns],
PARALLELPERIOD
[Exec Date].[Year].Levels('Year'),
1,
[Exec Date].[Year].CURRENTMEMBER
MEMBER [Measures].[Prev Month] AS
[Measures].[returns],
PARALLELPERIOD
[Exec Date].[Month Num].Levels('Month Num'),
1,
[Exec Date].[Month Num].CURRENTMEMBER
MEMBER [Measures].[Prev Day] AS
[Measures].[returns],
PARALLELPERIOD
[Exec Date].[Day].Levels('Day'),
1,
[Exec Date].[Day].CURRENTMEMBER
SELECT NON EMPTY { StrToMember("@ExecDateLevel"), [Measures].[returns] } ON COLUMNS, NON EMPTY { ([Employees].[Company].[Company].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM (
SELECT (
STRTOSET(@ExecDateHierarchy, CONSTRAINED)
) ON COLUMNS FROM [cbSales]) WHERE ( IIF( STRTOSET(@ExecDateHierarchy, CONSTRAINED).Count = 1, STRTOSET(@ExecDateHierarchy, CONSTRAINED), [Exec Date].[Hierarchy].currentmember ) ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
and when I replace "StrToMember(@ExecDateLevel)" with
StrToMember("[Measures].[Prev Month]") the MDX is compiled correctly.
what is the problem?
How can I solve that?

Hi Breceive,
In your scenario, the issue is caused by that you select dimension members and measures on the same axis without a crossjoin.
SELECT NON EMPTY { StrToMember("@ExecDateLevel"), [Measures].[returns] } ON COLUMNS
To avoid this issue, you can use the query below.
WITH
MEMBER [Measures].[Prev Year] AS
[Measures].[returns],
PARALLELPERIOD
[Exec Date].[Year].Levels('Year'),
1,
[Exec Date].[Year].CURRENTMEMBER
MEMBER [Measures].[Prev Month] AS
[Measures].[returns],
PARALLELPERIOD
[Exec Date].[Month Num].Levels('Month Num'),
1,
[Exec Date].[Month Num].CURRENTMEMBER
MEMBER [Measures].[Prev Day] AS
[Measures].[returns],
PARALLELPERIOD
[Exec Date].[Day].Levels('Day'),
1,
[Exec Date].[Day].CURRENTMEMBER
SELECT NON EMPTY { StrToMember("@ExecDateLevel")*[Measures].[returns] } ON COLUMNS, NON EMPTY { ([Employees].[Company].[Company].ALLMEMBERS ) } DIMENSION PROPERTIES MEMBER_CAPTION, MEMBER_UNIQUE_NAME ON ROWS FROM (
SELECT (
STRTOSET(@ExecDateHierarchy, CONSTRAINED)
) ON COLUMNS FROM [cbSales]) WHERE ( IIF( STRTOSET(@ExecDateHierarchy, CONSTRAINED).Count = 1, STRTOSET(@ExecDateHierarchy, CONSTRAINED), [Exec Date].[Hierarchy].currentmember ) ) CELL PROPERTIES VALUE, BACK_COLOR, FORE_COLOR, FORMATTED_VALUE, FORMAT_STRING, FONT_NAME, FONT_SIZE, FONT_FLAGS
Here is a similar thread for you reference.
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3c21d9a8-640d-4dde-bc76-08d1fcbb3a31/multiple-dimension-query?forum=sqlanalysisservices
Regards,
Charlie Liao
TechNet Community Support

Error in hierarchies

Similar Messages

Maybe you are looking for