Error in IDOC ststus , for interface IDOC to File

Hi All,
          iI am doing IDOC to file interface , in which i am using IDOC Orders05, we are using the same IDOC for other interface to connect with DOTNET connectors , when i trigger the IDOC ORDERS05 for my interface when i check the ststus , in which it is pointing the to partner No and Port to that dontnet, not to my Iterface for SAP XI , anyone there to help me in  this isssue
Thanking you
Sridhar

Hello,
         While sending Idoc you will be providing the Port which in turn needs RFC Destination and this is one which takes the document to External system configured in RFC.
If you need to send the idoc to External Systems other than R/3 then you need to use T type connection which uses JCO for estblishing session. if it is R/3 then requires logon credentails and type 3 for configuring RFC.
HTH
Rajesh

Similar Messages

  • IDOC type for interface between SAP ECC and SAP F&R

    Hi Experts,
    I need SAP standatd IDOC type for interfacing between SAP ECC and SAP F&R [SAP Forecasting and Replenishment] using message type u201CFRE_LOC_SITEu201D.
    Please help me in finding the idoc type?
    Regards,
    Krishan

    Hi Denish,
    You have 2 ways of loading data from R/3 to APO.
    1. R/3 to BW cube to APO-BW cube to APO planning area
    or
    2.  R/3 to APO-BW cube to APO planning area   
    BW can be a enterprise BW system ( independent) or you can use the BW inbuilt in APO also referred to as APO-BW.
    The only difference between the 2 BW systems is APO-BW can not take the load of reporting where as the enterprise BW can.
    Unless your company policy requires the enterprie BW system, I suggest using 2nd way.
    You can load the data from R/3 to APO-BW cube using extractors either generic or standard depending on your data. You need to have a RFC connection setup between APO-BW and R/3. ( This is not CIF).
    When you load the data into the APO-BW cube, you just have to load the data from the cube to APO planning area using the transaction /sapapo/tscube.
    Refer to [DP Data Mart|http://help.sap.com/saphelp_scm50/helpdata/en/13/5ada58309111d398250000e8a49608/frameset.htm] for more information about the data transfer between APO-BW and APO.

  • BW error:  "invalid call sequence for interface when recording changes"

    I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW.  Any ideas on how to resolve this error?
    Thanks.

    I already tried that.  This is what's happening..  When I get this error, if I try again it will activate and gets collected into a transport.  I moved this transport to our QA system.  As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource   xxxxx must be activated.   Before the excecution of the infopackage, the datasource is in "Active version executable".   After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable".   I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
    I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
    Any help?
    Thanks.

  • EDI IDOC generation for interface with Vendor software help needed.

    EDI IDOC help needed.
    We are NOT an EDI shop, but have a project to output data to Sales Force.com
    Sales Force requests IDOC output - eg. 810 Outbound Invoice.
    We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
    Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments?
    I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
    Basicall we have a report program that the user enteres in the date range of Order/Quotes/Invoices they wish to extract, the the program needs to output a flat file (.txt) on the server which is then picked up by Sales Force.com.
    Also, is there a way to have in the Partner Profile a generic Partner under the "Type KU" that can be used for all orders/invoices so I don't have to create a KU Partner Type for each and every Sold-To customer we have?
    I am very new to EDI so any help would be greatly appreciated.
    Thanks.
    Scott.

    Hi Scott,
    We will need to do a historical load of Orders/Quotes/Invoices from the past 2 years.
    I know it's very tempting to use an interface for such loads if you anyhow have to create one. However, often the volume alone speaks against interface usage for such scenarios.
    Is there a function module or series of FM's that are used to generate the E2EDKxxxxx type segments? I have been testing using the IDOC_OUTPUT_INVOIC and IDOC_OUTPUT_ORDRSP FM's, but they generate segments begining with E1EDKxxxxx.
    Well, the E2* segments basically reflect the external name of the IDoc segment, whereas the function modules you're referring to basically just create an internal version of the IDoc. Once the IDoc framework then passes the IDocs to the partner, the segment names usually (depends on how the IDocs are passed on) get converted to their external name. If there are multiple versions of a segment, then the version number will be appended to the segment name.
    Note that IDoc segment definitions are only partially stored in the data dictionary. If you want to see all versions you should always use transaction WE31 to look at segments. There you can also see for example for E1EDK01 the several versions and when you then use in SE37 function module SEGMENT_EXTERNAL_NAME_GET you will see what SAP produces as the external name for segment E1EDK01. This function module is basically the one that handles the segment name translations.
    Ignore the comments for subsystem, this is basically an option in SAP to possibly trigger further external tools (e.g. mapping etc.) for handling the outbound IDocs.
    Again, the funny thing is that via the WE30 transaction, if i put in INVOIC02 as the Obj. name and see the segments, i can see that E2EDK01 there is a version 005, but if i go to SE11 and put in E2EDK01005 structure line and i get a "not found". We just have up to E2EDK01002.
    In the old days SAP used to generate E1, E2 and E3* structures in the data dictionary (SE11). The E1* structure reflected the character type representation of an IDoc segment, whereas the other two (definition and documentation) contained actual references to data elements (e.g. if you used a quantity field). However, in newer releases those dictionary structures (E2* & E3*) are no longer generated, because they're superfluous (meta data defined via WE31 is sufficient).
    Cheers, harald

  • How to get Get IDOC Number for Inbound IDOCS

    Hi,
    I am using the FM -- IDOC_INPUT_HRMD for creating Inbound IDOCS.
    I populate the values for Control Record and Data Record and the IDOC is posted successfully and i get the status 53 in the status Table.
    But the problem is the field for IDOC number(DOCNUM in IDOC_STATUS Table of the FM ) is empty.
    How can i get the DOCNUM for the IDOC posted as a result of this FM ?
    regards,
    Siddhartha

    Hi Siddhartha,
    I think you cannot call IDOC_INPUT_HRMD fm directly from the external program as this fm only handles the application logic part and not the idoc number generation and save part.
    So I think you have to call IDOC_INBOUND_SINGLE from your external program and then get the IDOC number.
    Then if you need the status records then you need to call another fm and feed IDOC number that you have got from IDOC_INBOUND_SINGLE (there is one IDOC_READ_COMPLETELY but it is not a remote enabled fm)
    <b>OK, I just found one RFC enabled fm which you can use,
    <b>EDI_DOCUMENT_READ_ALL_STATUS</b></b>
    Hope this helps..
    Sri
    Message was edited by: Srikanth Pinnamaneni

  • Idoc packaging for Receiver Idoc adapter in 7.11

    We are using PI 7.11. And, I have a File to Idoc scenario. I am trying to find an Idoc packaging option for Receiver Idoc adapter. Any suggestions on how to do configure thi scenario?
    Thanks
    abhinaya4321
    Edited by: abhinaya4321 on Dec 3, 2011 12:15 PM

    hi,
    We are using PI 7.11. And, I have a File to Idoc scenario. I am trying to find an Idoc packaging option for Receiver Idoc adapter. Any suggestions on how to do configure ?
    that is possible with message packaging concept it is suitable for you requirement
    go through below links:
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c?QuickLink=index&overridelayout=true
    thanks,

  • How to check IDOC Serialization for custom idoc

    In one of my interfaces, we are receiving idocs ARTMAS, INFREC, COND_A and ZMD_ARTHIER in ECC system.Last one is customized one in which basically we have to assign one article to an article hierarchy. So this idoc will contain only article no, hierarchy id and node level in which article will be assigned.
    Now here we have to implement idoc serialization so that if ARTMAS in any case fails then INFREC, COND_A and ZMD_ARTHIER idocs should not be posted. We will be using RBDSER04 program for inbound processing.
    My concern is that whether we have to do any special coding for serialization check in custom function module for the last idoc ZMD_ARTHIER.
    If yes, please please let me know how to do handle that in custom inbound function module.
    Edited by: suman pandit on May 19, 2009 10:47 AM

    Hi,
    you need to create a serialization group (in customizing) and assign all the IDocs (in specific order) to this group incl. your custom IDoc.
    When data is transfered first a SERDAT01 IDoc will be sent, after this your IDocs have to follow in specific order. At last again a SERDAT01 follows and triggers the processing in the destination system.
    Regards,
    Kai

  • Regd. Error in Adapter module for IDOCxml to flat file conversion

    Hi Champs!
    I am using PI 7.1 and i am trying out the blog for direct conversion of IDOC xml to flat file and vice versa.
    /people/william.li/blog/2009/04/01/how-to-use-user-module-for-conversion-of-idoc-messages-between-flat-and-xml-formats
    has anyone tried this in Pi7.1
    i am getting the following error:
    Message processing failed.
    Cause: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException:
    Path to object does not exist at SAP_XI_IDOC, the whole lookup
    name is localejbs/SAP_XI_IDOC/IDOCFlatToXmlConvertor.
    I have done all the setting required .. as per the blog.Is it srictly for PI7.11?
    Regards,
    Abhi

    Hi Abhi,
    This feature is a part of PI 7.11  new features , as it is mentioned in the begining of the Blog itself.
    So i feel , yes its strictly PI7.11 feature which may not be available in PI7.1 version which you are using currently.
    There may be workarounds...lets c  fellow SDNer's replys:)...
    Regards,
    Srinivas

  • The meta data for the IDoc type "MATMAS05" is unavailable

    Dear Gurus:
    I need  help in completing small test that I am doing to send MATMAS IDOC to xMII.
    I have done:
    1.     RFC connection SM69 and tested ok
    2.             xMII IDOC Listner config with my SAP client
    3.     Connection appears in –smgw ok (in logon client screen)
    4.     Completed Distribution channel and we20,we21
    All above looks in place when I send one IDOC (BD10) it remains in 03 even after I run RBDMOIND. Besides IDOC is not appearing in C:\Lighthammer\JCO\Output.
    On tRFC I see error “The meta data for the IDoc type "MATMAS05" is unavailable.”
    Note that
    a) I am NOT using transaction on routing tab
    b) xMII version 11.5
    c) I used "How to send IDOC ...." Version 2 PDF that is available on web (thanks to Bimal)
    d) I looked at other two posts which has to do with LOIPRO message type and with JCO issue
    Please help.
    Thanks
    Jay

    Jay,
    What version of ERP are you using, perhaps this note will help: 770239
    Also the SAP Help has some suggestions as well...<a href="http://help.sap.com/saphelp_nw04/helpdata/en/8a/b8b13bb3ace769e10000000a11402f/content.htm">Click Here</a>
    -Sam
    null

  • Idoc segment for shpmnt notification for idoc type shpmnt02

    Hi gurus,
               I have to find the idoc segment for shipment notification,idoc  type which we are going to use is shpmnt02 or shpmnt01,Can any one of you please tell me the idoc segments for this idoc type with fields and table name?.Thanks in  advance.

    Hi Nagarathinam
    You can use transaction WE60 for documentation on IDOCs
    Best regards,
    Chris

  • Central User Administration Idoc's for a XI system

    Hello,
    We are setting up a Central User Administration (CUA) in Solution Manager. One of the systems that needs to be a child of this CUA is a SAP XI 2.0 system.
    The distribution of the Users is done by IDocs.
    Everything is working fine from the CUA to a SAP R/3 system.
    But when we make the XI 2.0 a child all the IDoc's are caught by the XI IDoc adapter in stead of going directly to the IDoc inbound handler of the XI system.
    Has anyone been able to send an IDoc to an XI 2.0 and bypassing the IDoc adapter and sending them directly to the XI IDoc Inbound handler?
    Any kind of info will be greatly appriciated.
    With kind regards,
    Leon Boeijen

    Hi Leon,
    to bypass the IDoc Adapter for specific IDocs you can specify these IDocs using the report IDX_SELECT_IDOCTYPE_WITHOUT_IS.
    Kind regards,
    Andreas

  • How to find the outbound program for standard IDoc

    Hi Folks,
    Can anyone tell me how to find the outbound program/tcode for a standard IDoc? For e.g. IDoc - MATMAS05 can be generated & distributed using tcode BD10. Similarly how do I find the outbound program/tcode for any standard IDoc? Is there any procedure to find the same.
    I have tried to search based on the package name, but unfortunately I didn't find the information for IDoc: COND_A04.
    Thanks in advance.
    Somu

    You can do following steps if the idoc is generated based on change pointer concept (for masters)
    - Identify the message type associated with idoc type (table EDIMSG).
    - Function module for generating the IDOC will be available in table TBDME (pass message type as input).
    Refer to the standard Outbound IDOC generation program RBDMIDOC for more details.
    If the idoc is generated based on the process code concept (transaction data), get the process code information from table TMSG1 (pass message type as input), get the function module associated process code from table TEDE1 (pass process code as input).
    Regards, Vinod
    P.S: There is no standard way to find out the associated program / Tcode for generating idoc. The above process will be helpful to find out the underlying function modules to generate the idoc.  For generating idocs based on change pointers the generic program RBDMIDOC can be used.
    Edited by: Vinod Kumar on Jul 13, 2011 2:15 PM

  • Settings in R/3 for Interface

    Hi, Please advise what are the settinings / defines to be done in SAP R/3 to set interface with external system in PP-PI? Please suggest. Thank You.

    1. Kindly explain which if your external system /
    2. How are we planing for interface ( IDOC, FTP) etc.
    3. What Data you want to send ( master data, Transaction data)
    we need to know the baisc things like above so that we can plan for hte same.
    Reg
    dsk

  • N IDoc s message to one txt file

    I have finished IDoc to file scenarios.
    If I send n IDocs , there will be n txt files.
    Can I just get a TXT file, with one line with one IDoc?
    Thanks.

    hi
    Another idea for collecting IDocs consists in using standard functionality of the IDoc. Instead of sending the IDoc directly to the XI via the IDoc adapter, you can download the IDocs gathered in a file with XML format. This file can now be uploaded by the sender file adapter. As the XML structure is the same as the IDoc adapter produces, there is no change of the behaviour of the message, besides there no single IDoc inside, but multiple IDocs instead.
    1)As first step you go to WE21 and create an XML file port in the application system. Apply here a function module for creating the file name. You can use a standard module or a self-written module.
    2)Schedule report RSEOUT00 with a variant where you assign the IDoc type, the xml port and the number of IDocs which shall be collected.
    3)The report collects all IDocs in one file, until the "Maximal number of IDoc" is reached. When you have for example 2400 IDocs and you set "Maximal number of IDoc" to 1000, you receive 3 files, two with 1000 IDocs and one with 400. Inside the file there is one IDoc tag for each IDoc.
    Do not gather too many IDocs into one file. The file size should be considered carefully. Too large files might cause memory leaks, when your hardware is not sufficient.
    The files can be uploaded by the sender file adapter. When you collect IDocs of the same type, the Mapping can be done the same way as for IDocs processed by the IDoc adapter.
    check the blog
    /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
    Note: reward points if solution found helpfull
    Regards
    Chandrakanth.k

  • No endpoints found for interface

    Hi All,
    I have the following scenario: RFC in the backend system (ECC 6.0 SP09 no EhP's) and PI 7.1 as an Integration Broker.
    I have imported the RFC into Enterprise Services Repository and done the necessary tasks to configure an Enterprise Service.
    After that I have published the Interface to the Services Registry, Testing the Interface in WSNavigator is working fine.
    I have imported the Enterprise Service into Web Dynpro as a model and when running the Web Dynpro application I am receiving the following error:
    com.sap.esi.esp.service.server.query.discovery.ExtendedServiceException: no endpoints found for interface TreeInformationQuery_Out
    defaultTrace:
    Caused by: com.sap.tc.webdynpro.model.webservice.exception.WSModelRuntimeException: Exception on creation of service metadata for web service mass config parameters service reference ID 'TreeInformationQuery_Out_FICSIT_BASIC' and application name 'demo.sap.com/ficsit~tree'. Check mass configuration has been done properly.
         at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:522)
    Any idea's?
    Regards,
    Ridouan

    Hi Sergei,
    My backend system is ECC 6.0 SP9 (no EhP's) and therefore I can't use the trx SOAMANAGER.
    I have imported an RFC from the ECC system into the PI 7.1 Enterprise Services Repository (Builder) and then published the Service (from Sender Agreement) into Services Registry also on the PI 7.1 system.
    Testing the service in WS Navigator is working fine, I can see an endpoint here.
    Also testing the WSDL with third-party application is working fine.
    JAVA Web Dynpro is given me the error: no endpoints found for interface...
    Thanks again.
    Regards,
    Ridouan

Maybe you are looking for